System installation disk application after update
I updated my vista... now ask for instalation disc... i don't have that... like my laptop came not with a... .to pre-installed... I do not have a Disc to boot or recovery... never had the chance to do a...
now my computer is completely useless...
original title: I updated my vista... now ask for instalation disc... i don't have that... like my laptop came not with a... .to pre-installed... I do not have a Disc to boot or recovery... never had the chance to make a
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do recovery disk/s of the recovery Partition in case of hard drive failure or System Crash, when it is up and runniong again.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon. Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.
I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.
After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]
A few external links to help you set permissions:
MAC
OS X Yosemite: set permissions for items on your Mac
WIN
Set, view, change, or remove permissions on files and folders
Kind regards
Ashutosh
-
In all video Applications after update by 2014 CC Big Trouble
After updating my CC to CC (2014), video-Applications (Pl, Pr, Sg, me) does not work.
Other applications (Ps,...) are ok. AE starts, but it works very badly.
PL, Pr, Sg, myself does not start.
Really tested this software until you have published it?
I'm working on OSX 10.9.3 with Blackmagic video-Hardware. German version.
now, I find the right answer:
Problems starting CC 2014: Adobe Premiere Pro
It is important to define all THE NAMES to read/write!
now it works very well on my machine :-)
-
I can not select Windows 8.1 upgrade and other applications after update system
I just refreshed my laptop Windows 8.1 after that that he returned to Windows 8... I opened the store and I can't select Windows 8.1 upgrade and other applications. What can solve this problem?
Hey Kevin,
If you bought your laptop with Windows 8, and she had a recovery partition, it would reset to Windows 8 when you want to run a system to refresh. This also applies if you have performed the update system using a disk installation or recovery of Windows 8. You mentioned that you are now unable to update Select 8.1 of Windows update, the Windows store.
The Windows 8.1 update is not listed? Or you can not face problems with the update 8.1 for Windows from the Windows store?
If you are facing the issue later, what happens when you click on the update of Windows 8.1 in Windows store? An error message appears?
You also mentioned that you can not store of Windows other apps? What happens when you try to install?
If you are unable to find the Windows 8.1 update in the Windows store, try the steps suggested in this article and checking:
http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store
If you are unable to install the update Windows 8.1 displayed in store Windows, then try these steps and check:
First of all, make sure that you have installed all the Windows updates available, including 2871389 KB and KB 2917499.
Method 1:
Run the Windows update troubleshooting utility which can automatically detect and fix most of the incorrect settings that could cause problems with the download of updates. See the following steps:
- Press the Windows key + F to bring up the Search bar charms.
- Type of Troubleshooting and press enter; Click the tab settings , under the search box.
- Click on the tile to find and fix the problems and then click on the button show all the left pane.
- Click the Windows update troubleshooting tool and run it.
Method 2:
If the problem persists, disable any third-party antivirus software that you may have installed temporarily and check.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3:
If the problem persists, start your computer in a clean boot state, and then try to install Windows 8.1. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:
http://support.Microsoft.com/kb/929135
Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.
-
HP compaq has acer applications after update...
Hi, I have a hp compaq that comes with a windows preinstalled 8. After awhile, I accidentally delete the recovery disk
made me impossible to update or reset my pc. I then create a recovery drive on my external hard drive to an Acer running windows 8 also
I then update my pc from this recovery external drive, I created that when finished I found my hp compaq acer applications and other applications does not. Please help I don't know what to do.
Hello
If you really Acer programs on the system, then someone must have written too
the partition recovery or your backup on a disk from Acer. Check with HP support which
can provide a disk for Installation of Windows 8 so that you can successfully install Windows so it
can be updated or reset if necessary. The media should be at low cost since you already
Clean Windows.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Extension Manager no longer shows applications after update to 7.3.2.39.
I posted a similar question to this topic, but was not aware at the time of the update was what was causing my applications to disappear from the Panel to the right. 'Other' shows only. I've done pretty much everything I saw in the forums, like running ExtendScript Toolkit and check under "Targets" paths are correct for each CC application. I went as much as just uninstall, running Adobe cleaner and reinstall everything. It worked, and the applications appeared... until the upgrade of the extensions Manager to 7.3.2.39. Right now I use an earlier version of the extension manager, just so that I can use and download the plugins that I need. I am on Mac OS X 10.7.5 currently. Its annoying to have to see that I have an available update in my toolbar, so I'd like to solve this problem. I can give you the info you need.
Thank you.
I think I understand, after spending too much time on this point, is that CC 2015 apps no longer support the extensions Manager. My situation was that I was trying to install an extension in Photoshop CC 2015. He apparently would have worked had I installed the extension in 2014 CC Photoshop and then upgraded to update to Photoshop CC 2015. However, because I only CC 2015 installed when I tried to install the extension, and the extension manager was no longer an option; the only solution for me was for the extension provider provide another method of installation, not requiring not not the extensions Manager (which they eventually provided).
-
Cannot start Metro applications after updating but IE - Windows 8
Hello everyone.
As I said in the title of the topic, I can't launch Metro apps once I updated my laptop. I tried all of the solutions that I can find: sfc, diagcab, etc. And the worst part is that none of the solutions I've tried works (no, not even to make a new account because I can not fire the laptop settings).
I hope someone can give me a solution without having to reset/format because I have a lot of important files on this laptop and I have nothing to back this up.
Here are some photos and a video to explain more: video
Hello
Welcome to the Microsoft community.
You may experience this problem if the system files are corrupted or due to changes in the resolution of the screen on the desktop. I want you to know some basic information for the modern user interface to work properly on Windows 8 / 8.1:
> User account control settings need to be enabled.
Note: User Account Control (UAC) notifies you before changes are made to your PC that requires administrator-level permission. By default, UAC is set to warn you as soon as apps try to make changes to your PC, but you can change how often UAC notifies you.
> To align the apps, you need at least 1366 x 768 screen resolution.
> Requires Microsoft account.Follow these methods and check if that helps:
Method 1: brand 'x' in the lower right of the app. This behavior may be the result of a problem or error when an app package has been installed or injected into the Windows 8 or 8.1 image, or it may be the result of the outdated software. Follow the steps in this article:
Windows 8 app tiles have an 'x' in the lower right corner
http://support.Microsoft.com/kb/2832072/en-us
Also, try changing the minimum screen resolution of 1024 x 768 and check if it helps:
Get the best display on your monitor
http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor
If the problem persists, proceed to the next method.
Method 2: Try installing the latest graphics card drivers and check. I also suggest to visit the manufacturer of computer technical support site and install the latest graphics drivers.
Download and install the drivers
http://Windows.Microsoft.com/en-in/Windows-8/all-drivers
If the problem persists, proceed to the next method.
Method 3: Run the Troubleshooter of Apps. This tool can automatically identify and fix problems with the applications.
Note: This utility automatically corrects some problems that may prevent your running applications, including the suboptimal screen resolution and security or incorrect account settings.
Please consult the following link for troubleshooting if the troubleshooter does not help:
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
If the problem persists, proceed to the next method.
Method 4: I suggest you run the tool (SFC.exe) System File Checker and check if it helps. The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.
Use the System File Checker tool to repair missing or corrupted system files
http://support.Microsoft.com/kb/929833/en-us
I hope this helps. If you need help with Windows, let us know and will be happy to help you.
-
User passwords do not work at the level of the application after updating of the database
Hello
Working on the updating of the database user passwords do not work for front end users but the same passwords work at the db level.
We backup before refresh and restraint after the update, but if the user tries to connect to db, they receive the error invalid password/username.
but passwords are working at the level of the DB if reset us the password then it works fine, but we cannot do this for all users of all time. can someone share the knowledge or solution for this problem.
DB version: 11.2.0.3
operating system: AIX
Thank you
892574 wrote:
Yes, the process is correct.
We are capture passwords user via display SYS. USER$
I didn't see any errors in the logs I see only out put modified user.
Thank you
Do you mean that you update the column SPARE4 of $ USER (which is a table, not a view)? I don't think it will work, because the password is salted with a random string that will be different in the two databases. It might work if you return to the use of passwords for 10g, which are salty with the user name. See here, the 10 GB hash stored in the PASSWORD column is the same in the two databases, but the 11g in SPARE4 hash is different:
orclz >
orclz > conn sys/oracle@orclz as sysdba
Connected.
orclz > create user fred identified by Ginger;
Created by the user.
orclz > select password, spare4 of user$ where name = 'FRED ';
PASSWORD
------------------------------------------------------------------------------------------------------
SPARE4
------------------------------------------------------------------------------------------------------
9C592D45D54D1FB2
S:DF5BEC6914DFF48B39261EAA4DCF5746A309E50E791F6F90FBF2F33A8CD5; H:22E34131E43CC3DF07440A0DC2A45F22
orclz > conn sys/oracle@orcla as sysdba
Connected.
orcla > create user fred identified by Ginger;
Created by the user.
orcla > select password, spare4 of user$ where name = 'FRED ';
PASSWORD
------------------------------------------------------------------------------------------------------
SPARE4
------------------------------------------------------------------------------------------------------
9C592D45D54D1FB2
S:4FE5925E671719B9CA5904C42AAD965753CAC4891C31F1BA9B9DA83D3255; H:22E34131E43CC3DF07440A0DC2A45F22
orcla >
-
Pentium 4 CPU
1 GB of RAM.
Win XP Pro - SP 2
Dell Dimension 4500
If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.
-
Impossible to find Siri on Preferences system on MacBook Air after update to El Capitan
I upgraded my MacBook Air to OS X El Capitan 10.11.6 but should not be allowed to Siri during Assembly and can not find the option in system preferences. Any ideas?
That's right, because it is not an option in El Capitan.
-
Notes app so much lag after updating iOS 9.3
Is anyone else having problems with an extreme shift in the Notes application after update 9.3?
I mean, extreme, it may take 15 seconds or more to meet the press of button, or the tapping of an icon, in the Notes application. This happens only in the Notes application. All other aspects of the device are absolutely perfect.
It does not appear to be linked to the note of size. This can happen with a new note.
I believe that this can be related to synchronization. I've got 9.3 on my iPhone 6 Plus and iPad Pro. If I turn off one of the devices completely, there seems to be zero lag when I edit a note on the other device. However, as soon as I got the two devices, the LAG is.
Similarly, if I turn off the synchronization of Notes under parameters iCloud on one device, it starts immediately respond normally on the other device. Turn on the option, and back comes the lag.
I like to use the Notes app to make quick notes when out and about, but this problem has made almost unusable for this purpose.
Any ideas/suggestions?
Kind regards
Mark
Well, I guess it's me then with Notes of Apple.
Not only is the above past again, but synchronization has now ceased between my devices, making them practically useless soft.
I tried to reset all settings, signature of iCloud on all devices and back to hard re-boots etc and nothing works.
Such a shame, because they finally got the application up to the point where it is excellent functionally, but ruining with all these problems.
I'm starting to think of Apple should just stick to the material and traditional software, because they just do not work the cloud at all, even after all these years.
-
In despair because of the constant failure of Windows updates, I resolved to follow the suggestion of Microsoft with an 'install-> Upgrade' from my original installation disk.
After a short so that I get a message that it is not possible because my version is newer than the one on the CD.
Issues related to the:
- Why Microsoft finally proposes an update (patch) procedure that works correctly?
- Why Microsoft suggests a repair procedure (the upgrade of the installation disk) that does not work?
- Is there a way to force the upgrade procedure to do its job properly?
- Win 10 will have the same function of shit update?
I am running MS Windows 7 pro/64 SP1
Thanks for any helpful info
Ed
Hello
It would seem that your original DVD came without Service Pack 1.
Over time, you installed SP1 that makes the operating system newer than the one on the DVD.
Uninstall SP1 > do the installation of upgrade repair > reinstall SP1.
See you soon.
-
Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.
I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.
-
I chose to try the upgrade of Windows 10 on my laptop primary. Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning. Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems. Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward. After serious soul searching I elected continue to use Windows 7, I don't really like.
That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10. I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.
Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled. The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.
This window doesn't go away even after reboot, and I can not "check for Updates".
Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.
Thank you for any assistance.
By using the system restore before computer restart after updating Windows 10...
Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.
-
ADOBE CC devours hard disk after update on Windows 8.1
Hello
My disk space takes less after frequent updates of ADOBE CC suggests improvements. After the Elimination of some programs, I had 9 GB unused space remaining. After update, it has been reduced to only 7 GB. This means that 2 GB disappeared before my eyes.
I have fun Windows 8.1. [I read somewhere that I should delete a file named ACC.log from: \users\[user name] \App Data\Local\Temp. However, I can not remove this file I get the message that the file is used by ADOBE CC.
Thanks in advance for your help.
P.
Please refer to: https://helpx.adobe.com/creative-cloud/kb/cc-acc-log-file-consuming-huge-disk-space.html
If you still experience this issue after you have reinstalled the Desktop application, you can contact our support for assistance staff:
Maybe you are looking for
-
LION: Mail backup in the library not user/library
Hello, fellow members of the Apple community. I'm in a little trouble and I hope you can help me. I read articles such as Re: not able to locate the folder Mail and Mail Downloads on the Lion OS X disk and I read all sorts of messages elsewhere on wh
-
Satellite Pro L10 and Windows 7 drivers
Hi guys,. I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.XP drivers do not work.If someone managed to install the drivers for this machine? I'm mainly interested in
-
Error video driver on Satellite Pro A60
I had problems with my Toshiba A60 which has just run out of warranty. About a week ago I started getting blue screen errors and kept restarting my laptop. Once it had restarted using Microsoft error checking that it has been said that there is a pro
-
BlackBerry Smartphones BB Bold 9900 and 9720 cannot find the enterprise activation
Hi all I'm trying to set up an Enterprise Activation for one of our users overseas. She has two phones 'BB Bold 9900 and BB 9720'. It doesn't have the enterprise activation option. I asked him to download the activation request to company "App Worl
-
Greetings! -recently improved 8520 handset to the software device to 5.0 - all very well except that the icon I use most - the "Lock keyboard" icon has disappeared. Looked everywhere - icons hidden etc - no luck. Someone at - it a similar problem?