external devices do not work correctly

Similar Questions

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HARD drive external "this device does not work correctly"Code 10"

  Original title: it does not recognize the external HARD drive. (Convert HDD mobile external HARD drive)

  I have a Sata Drive en-plus close card I bought, I successfully installed the HARD drive and plugged (supposed to be taken & play), it does not recognize the HARD drive and I tried the computer management and replacement of INF. USB but still does not. Also, has problems. Drive HARD Toshiba satellite came 500 GB Fujitsu HDD.

  The point of this is to clean up the cause of the car, there an OPS on it, but I have not anymore!

  Need help please!

  Hello

  Method 1:

  See the link and check if it helps:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2:

  Check the link and try to run the Microsoft Fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Equium P300-16 t - Synaptics Pointing Device does not work correctly

  I hope someone can help.

  Just bought this laptop and for some reason, I get an error message come saying the Synaptics Pointing Device does not work properly. The touchpad loses some functions and a warning appears informing me of this. I can still use it, but disappears from the icon in the taskbar with the flashing blue dot - when I go into the control panel it says the driver and he asks if I installed another ps/2 pointing device driver

  Looking forward to any help you can give.

  Suggest that you reinstall simply touch pad drivers. Maybe new version?
  So, just uninstall drivers, restart your computer, reinstall the drivers.

  Drivers are located on the download page of European drivers.

• Microsoft Teredo Tunneling adapter device"does not work correctly.

  Hi Sir/Madam

  Hello, can you help me find driver problems, sir.i am on hp pavilion g6 Series notebook.i found this message there, Windows reports that the "Microsoft Teredo Tunneling adapter" device is working properly. But I opened the Device Manager and I found the icon and I double click and then try to update the driver software but I found ago encountered a problem... This device does not work... Sir can you help me solve this problem... Thank you for your time

  Hi Binet1,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-2225tu issues of driver for laptop and have on the Teredo Tunneling pseudo-interface. Right click and delete all Teredo Tunneling pseudo-interface. Restart the computer. You could update driver software by right click, browse computer for driver software. Select let me pick from a list of device on my computer-> network adapter drivers > Microsoft > adapter Microsoft Teredo tunneling.  You can enable system restore by following this document.

  I'd be happy to help you if necessary because there are many models of HPNotebook, I need the model number. How can I find my model number or product number?
  Please respond with an operating system that you are running:
  Operating system Windows am I running?

  Please let me know.

  Thank you.

• My instant HDTVPCI ADSI device does not work correctly.

  As I said earlier, my instant ADSI HDTVPCI device is not operational, and Device Manager cannot start or reset for me. Please help me to fix this problem, thanks. William Schotts.

  Hello

  Follow these methods and check if that helps:

  Method 1:

  Try running the fixit from the link give below and check if this can help:

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2:

  If the drivers are not installed automatically install use the software that came with the hard disk and install the drivers and software. Refer to this article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

  My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

  Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

  As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

  I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

  This left me confused.  If there is a problem with this device, no solution seems to exist.

  Any help that will allow my laptop to function normally is welcome.

  I understand that you want to know if the teredo adapter can cause performance problems.

  The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

  This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

  If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

  Furthermore, does this happen that the adapter is connected or not?

• Equium A100-147 - sound devices do not work correctly

  I've owned an Equium A100-147 for only less than a year.

  The problem I have is that if I put pressure on the area around the left speaker (where is the VGA port) there is a substantial "cracking" / rattling noise. The right does not exhibit this problem.

  The other day with a same case design (model Satellite A), I got another PC Toshiba laptop and it seems to have a slightly stiffer construction quality.

  Is it worth getting it checked under warranty while I still have the warranty? Or am I just too picky?

  See you soon

  Interestingly enough, why you support on the area around the speakers. As far as I know the speakers are placed between the keyboard and display and keyboard there is no pressure to the speakers. Very strange method to test the functionality of the laptop! ;)

  In any case, you should contact the service because the speaker should be placed and fixed correctly.

• HL-DT-ST DVDRAM GT32N SCSI CdRom Device does not work correctly

  Hello

  I have this unit in my ASUS laptop: HL-DT-ST DVDRAM GT32N SCSI CdRom Device,.

  and it is not read most of the inserted discs. Prints are better, but is not able to read one of my CDs or DVDs written at home.

  A few years ago I tried to solve the problem and that I can remember other users had the same problem and the driver update has been recommended, but I also discovered that the support for this product is complete, and I couldn't find all the archives. I dropped.

  Now I'm able to download a driver is already installed on the computer that has the version number: 6.1.7600.16385.

  I suppose that there could be problems other than the driver himself.

  Help, please!

  Hello

  Try to clean the disc with a cleaning disc.

  If cleaning doesn't help not the drive has a hardware problem, since it corresponds sporadically.
  For discs do you you try to use the format of the ISO image.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  =====================

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My external storage devices do not work.

  My laptop is running Windows 8 pro 64-bit version.

  Whenever I connect an external hard drive or USB key, it is not detected. I went to the Device Manager, it he showed that there is an error with the usb mass storage device. I checked and it shows the error 38 "code, an instance of the driver is already loaded into memory. Then when I restart my pc, it works fine, but once again the problem returns. I was faced this problem for about a week now.
  Is there a solution for this. Please help me out here.

  Hi Julie,.

  The driver could not be loaded because a previous instance is still loaded

  I suggest you run the hardware and devices Troubleshooter to check. This should solve the problem of equipment.

  Follow these steps to run the hardware and devices troubleshooter.

  a. press the Windows key + W and type Troubleshooting.

  b. Select Troubleshooting.

  c. Select show all in the upper left corner.

  d. run the convenience store hardware and devices.

  You can also use the Troubleshooting Wizard to solve the problem.

  a. in the device properties dialog box, click the general tab.

  b. click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.

  c. follow the resolution steps provided by the wizard to resolve the problem.

  Then, restart the computer.

  Reference:

  What happens if a device is not installed correctly?

  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Let us know the status of the issue. We would be happy to help you.

• [SOLVED] External microphone does not work in my Dell computer.

  Hello, I have recently updated to Windows XP pro SP3 32-bit to windows 7 Home premium 32-bit. I have an external microphone that worked on windows xp, but does not work on windows 7. all sounds and things work, but not the microphone. Any help will be appreciated. (I don't know how to check the other driver then by 'Device Manager'. All that says is HD Audio device)

  Original title: micro external Dell Latitude D630 problem

  2nd title: Microphone does not work in my Dell computer.

  EDIT: I found the problem, it seems that the windows driver automatically installs is not correct...

  Here is the link I found the driver and instructions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Dell-D630-SigmaTel-driver-for-7/dcf42039-664f-E011-8dfc-68b599b31bf5

  Hello

  Thank you for the update and happy to know that the problem has been resolved. In the future if you face problems under Windows, feel free to post your queries. We are happy to help you!

  Note: If the problem persists, you can try the methods and check after each method:

  
  Method 1: Check with different port.

  Method 2: Check the same microphone on another computer in Windows 7, if possible.

  Method 3: Try the methods that you have not tried earlier and check after each method:

  What to do when a device is not installed correctly:
  http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  It will be useful.

• External microphone does not work do not after update

  Computer does not recognize my external microphone after an update.  How can we solve this problem?

  The computer recognizes the headset but not my external microphone.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• Satellite L50 - C - 1 L 2 - USB 3.0 does not work correctly

  Hi, the new Satellite L50 - C - 1 L 2 has maybe a problem of USB 3.0. All the componetens that I connect to USB 2 works correctly. But some of these plugged into USB 3 doesn't work. A driver from Microsoft for USB 3.0 extensible Hostcontrolller v 1.0 is installed, no more. I cannot find any USB 3.0 driver in collection of driver of Toshiba. What can I do? They are a special USB 3.0 driver?

  Greetings, Michael

  im not toshiba but tell me how you know that your usb sata 3 do not work, you should have a usb 2.0 port and two usb 3.0 ports, if you use the usb 2.0 to usb 3.0 port device you will get only 2.0 speeds. USB 3.0 is backward compatible with usb 2.0 even peripheral id usb 3.0 according to manufacturer and specs of the device and how to use it. lets say spec is of high quality and again then you transfer files small speed should be fast that belong to 3.0 speeds but if you transfer large files then your currency becomes warm or hot and gets corrupted performance speeds down you can even get up to usb 2.0 speed and maybe that's why you think that your USB 3.0 ports do not work correctly , I hope that its clear things that worry you.

• Satellite L50-B916 - recording external Microphone does not work

  Hello

  Connect an external microphone to * Headphone\Microphone combo socket *, still records through portable microphone instead of externally. Registration of external Microphone does not work.

  What Miss me? Please notify.

  Model: L50-B916
  Screenshot: http://s12.postimg.org/j8h3v5k4d/laptop.jpg

  I can't say with certainty what may be wrong here, but two things confuse me:
  -somehow your external MIC is obviously not detected because in the case when the external microphone is connected laptop switches automatically to it
  -I don't understand why there are two identical entries under recording devices.

  When I connect my headphone it is always a single entry (Conexant SmartAudio HD default unit), but my machine automatically goes to the external microphone only.

  Have you tested the feature with some applications like Skype?