External drive has a different drive letter now, he does not see Lightroom Catalog.

Similar Questions

• New Mac, same disk external DRIVE for the library; does not see the files

  I reconnected my iTunes library from a disk external DRIVE to my new computer, but iTunes does not recognize my files of the ALAC instead, he goes to the cloud and plays music from Apple things. How can I listen to my files? All the files are there, the library is intact; I changed the path in iTunes. Without result. He always plays with the cloud.

  You do not change the path in iTunes.  Who does as it says which is tell iTunes where media files [new] store. You change the path you launch iTunes by holding down the option/alt key, while the application starts and then choose when prompted the iTunes Library.itl file in the iTunes folder you included if all goes well on the hard disk external.  If everything you have on the outside are media files, then you better head for your old computer fast and get the rest of the library there.  It's the rest of these files in the iTunes folder that make up the other half of the 'library' iTunes needs.

• Why my XP does not recognize a Toshiba 500 GB USB external drive... it does not appear in disk management or in computer

  Bought a new Toshiba 500 GB drive external usb.  My XP desktop won't recognize/find this disc.  It does not appear when you view the disk management or work station.  I also have it on my new laptop (Vista) and it has been found immediately.  My research online only tells me to find the external drive in disk management and assign a drive letter to... but I don't think to assign a letter! Toshiba says that the drive is compatible with XP. I have another smaller disk capacity that work perfectly on the XP machine.  Please tell us what should I do to have my Office XP recognize the
  is the new external hard drive.  E-mail address is removed from the privacy * or * address email is removed from the privacy *.

  Three things that you have not yet mentioned are

  1. don't change you the registry suggested by the KB Article (see: a computer that is running Windows XP cannot detect a USB flash drive, an iPod from Apple or an external hard drive)?  I suggest do it manually instead of using the FixIt.

  2 represents the drive recognized in the Device Manager (start > run > devmgmt.msc > OK)

  3 is the drive recognized in your BIOS (press the corresponding key on startup).

  Reformat to FAT32 was probably not necessary (and you'll probably want to re - format to NTFS before use).  XP has no problem with large (> 500 GB) external USB drives.

• I had to replace my hard drive and now windows does not recognize my product code valid what to do?

  I don't know what else to add, it's an HP computer and I've had it for 3 years. the hard drive has become corrupted and I replaced it and now windows 7 Home premium that I bought from best buy does not recognize as valid product code. What now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How can I make my verbatim and go portable hard drive work plug / he does not see my computer.

  I have a problem taking my verbatim branch and go 500 GB on my computer using xp nothing happens / it works on windows 7 and xp professional / / can someone help / using easy solutions / I'm 63 years old, / thank you

  Hi johnny English 7.

  1. What happens when you connect the drive to the computer?
  2. Are access you other USB devices on the computer?
  3. Did you the latest changes on the computer?

  Method 1

  I suggest that you check if the hard drive is detected in disk management and make sure also hard drive has the drive letter to attributed to it.

  To open disk management

  (a) from the start menu, click Run.

  (b) in the Open box, type diskmgmt.msc, and then click OK.

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

  Method 2

  If fails it above step can refer to the article below and run the fixit tool available, check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• Satellite Pro M70 does not see HARD drive sometimes

  Help me!

  My computer does not see my hard drive but see Installer and another computer.
  My hard drive is working and I put the new drive hard but computer does not see.
  And when I install XP on the computer I can see HDD format during the installation.
  And when prawns my computer I do not see the HARD disk again.

  Help me please

  Hello

  I think that it s a HDD issue naturally it s really strange that the HARD drive is different sometimes and sometimes it s is not visible, but I doubt that it could be software related issue. That's why I think that it s a drive HARD and in my opinion, you should check if other HDD SATA runs correctly.

  Good bye

• My hard drive on my IMac has only been replaced and now when I log in Lightroom it asks the serial number. I bought LR3 years and upgraded to 4 via the web. I have original in my LR3 product code number but not the serial number for my LR4. How can I

  My hard drive on my IMac has only been replaced and now when I log in Lightroom it asks the serial number. I bought LR3 years and upgraded to 4 via the web. I have original in my LR3 product code number but not the serial number for my LR4. How can I get that?

  If you have purchased lr4 where registered with adobe, consult your Adobe ID account - using the same adobe id for purchase / register.

• Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.

  BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.

  Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

  

  The hold button SHIFT DOWN when you start iTunes and when you see this message:

  

  Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

  For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

• I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use.

  Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.

  The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.

  I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...

  Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.

  I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.

  There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?

  Thank you.

  Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
  I think that some programs on your machine may be playing with your drive letters.  Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.

  HTH,
  JW

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• has running kill disk, vista has disappeared and my laptop does not see my dvd/cd drive

  I installed ubuntu to see if I could change my cd drive letter ther beginning could not understand. If someone could help iid appriciate it. I'd like to reinstall windows

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• updated my driver for my Ethernet controller and now it does not work

  Original title:

  Network network network Ethernet device

  I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
  to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
  a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

  Hello

  You can try the following steps and check if it works:

  Method 1:

  You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Method 2:

  If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

  It will be useful.