external enclosure for lightscribe DVD burner

Similar Questions

• Is there an external enclosure for UltraBay series

  Hello

  I think to use UltraBay for a second hard drive, but I'll also be able to use CD/DVD so I look around as an external enclosure. I found some USB cameras compatible UltraBay but none compatible with T500. As I see it, there are three UltraBay variants or more...

  Any help?

  Kind regards

  Ronny

  Look here for a German distributor: cradle

• HP Pavilion dv7 - 3188cl: looking for a DVD burner for my laptop

  Hello

  I'm looking for a DVD player, cheap but good that could fit into the computer laptop HP Pavilion DV7 - 3188 cl. Can someone please give me some advice?... Any help is greatly appreciated... Thanks for the help in advance...

  Use your P/N on hp pilot site and find the service manual and see what the cottage to OD it uses and you can then use to refer to what DVD player burner you can get. And if it's a Sata Drive more recent OD are sata you just have to make sure that it is a DVD burner and then swap the front to match the original.

• For Windows DVD burner 8

  Just got a new computer with Windows 8. Unfortunately discovered the window of Windows 7 DVD writer disappeared. (Data disc, burning on Windows Media Player is not useful) I do home movies, photo slideshows and have no way to burn them. (So that they can play on a DVD player) I don't know what they were thinking when they took the engraver of DVD of Windows 8, because I would be more then happy to pay for it!

  Since it no longer exists, but is - anyone out there found any good software? I'm looking for something simple, preferably $100 or less. I bought a DVD Creator software to date and it has been a NIGHTMARE!

  Some people have suggested DVDStyler, a little wary of free downloads. Or I've tasted Wondershare, but I'm also a bit wary of compensation for the more than downloads. (-:

  Warning or suggestions would be greatly appreciated!

  Hello

  I suggest you to check in store Windows that there is some DVD burning software are available.

  Check out the link,

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-store#1TC=T1

  Also, use your favorite web browser and install the free DVD burning software.

  With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If you need help with Windows, please let us know we will be happy to help you.

• HPE-500Y LightScribe DVD Burne: help looking for replacement for HPE-500Y LightScribe DVD burner

  DVD writer internal LightScribe locked up.
  I tried to find replacement and continue to use LightScribe when I transfer VHS to DVD.
  Help

  Hello

  You can get a optical drive 5.25 "HP Lightscribe on Amazon.  The same page lists the others not to HP 5.25 "optical drives.

• computer does not detect not active LightScribe dvd writer drive.

  Bought in 2009-trusty HP Photosmart C8180 printer all-in-one has a permitted lightscribe dvd burner drive. Worked very well with 32-bit Xp computer.

  Now I have a new computer running Windows 7 64 bit, so had to download software like older software would not work. Printer now works fine again, even wireless. Yesterday I tried to use the dvd player, but my new computer does not detect the dvd on the same printer drive. I love this printer and nothing on the market has the following features for a replacement is not what I want.   Someone at - it suggestions. Cheers from Tasmania

  Tried the software. Its the same thing as what I downloaded when my own outdated software did not work.  I tried to add a USB in addition to the wi - fi connection. The computer then saw the drive. This means that it is the only way it will work or is there some software/driver tweeking or more I can / add to make ALL of the wi - fi function

• External charger for Toshiba laptops

  Basically, I have a toshiba laptop and the connection between the charger and the laptop real is in ruins, I had this problem before and found better to just get a whole new laptop, is there not an external charger that I could buy that would work or at least a way to get my pictures off of it?
  Thank you.

  This charger doesn t exist.

  Jurgo is quite right. For a few Euros you can buy external enclosure for SATA HDDs. put your HARD drive in this case and connect it to the USB cable and another PC / laptop as external drive.

  On this way, you will have full access to all your stored data.

• HP pavilion dv6 - product a1m22av dvd burner program

  Hi I just got this Hp pavilion dv6 - a1m22av produced by a friend of mine as a giift and I was wondering which program works best for the dvd burner, it seems that it came with the recovery disk. Any suggestions?

  Hello

  Please try to create a set for yourself (I hope that your friend has not removed this tool):

  http://support.HP.com/us-en/document/c01867124

  Many around, pay for burning software, free of charge. Please read the following article and select a product that is suited to your needs.

  http://www.techsupportalert.com/best-free-CD-DVD-burning-software.htm

  Kind regards.

• Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  ==================================
  Hard to say exactly... but it may be worth trying to use
  another brand of draft DVD and the slower burning speeds.

  Check the support site for your DVD burner... they can
  offer suggestions on the DVD blanks to use.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Creation of DVD Windows can't find the dvd burner

  Hey, I have long used Director Windows and published my films through windows dvd creation, and programs have been working perfectly... but now I have a problem... When I get to the part where I want to make the movie, I can get the project ready and make the titles and all, but when I'm choosing to burn the project/dvd, create dvd windows can't find the dvd burner? I checked the bios and Device Manager and used another program cdburnerxp to burn a file... Then, how the creation of windows dvd to save my dvd burner?

  Hi mwinterberg,

  I don't know if you are still struggling with this problem, but looks like it's maybe a codec for your DVD Burner problem. See the following link for help with this:

  Codecs: Frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/3d0c5a49-8F61-45cc-8A7D-38c4695ba9291033.mspx

  I hope this helps. Please report if you still have any questions.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Half frame of slide shows - DVD burning slide

  I created a slide show in Photoshop Elements 10.  I then clicked on exit to begin the process of creating a DVD.  When the show transferred to first Elements 10, only the lower part half each frame dia appeared and thus produced a slide show DVD with only the bottom half of the frame.  I then tried to burn a new DVD of slide show that I had burned successfully on a previous occasion.  By clicking again on the production and following the menu, I had the half frame again when I arrived for the DVD burning program in first Elements 10.  Can someone give a help?

  Here's that ANNOUNCEMENT:

  ANNOUNCEMENT: Windows Update is display be blackened

  MicroSoft has released an update for Windows, which poses problems with screens. What follows is of Talbot McInnis, who has been tracking this problem and offers a solution:

  "MS technology MS13-057.  Specifically, on kb2834904 XP and windows 7 kb2803821 is causing a problem

  .

  For us, it happens when the decoding of WMV9 files.  Not all uses of decoding WMV are affected, but I have confirmed that when linking the WMV decode DLL to a sample for RGB32 video grabber, executives are black on top, so that points directly to the internal data of the dll to decode WMV decoding.

  You can uninstall these windows updates to fix your problem. »

  There are several discussions on the issue that this update is initially on the pre and PrPro Forums, so we can get more details. So far, there is not another hotfix of MS or Adobe.

  Also, check out this Adobe Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml

  Adobe reported that MS is approaching a new update, but not yet the release time.

  Good luck

  Hunt

• External good DVD burner need for Satellite A30-203

  Can someone suggest a good external dvd burner for my A30-203
  I think I need to copy the videos of the laptop I think that their storage on the laptop uses a lot of memory.

  Can someone recommend / help please.

  Hello Ken

  It will be interesting to know what is your priority. Do you want ultra-thin DVD burner and take it with you or you want to copy all that at home.

  I ask this question because I used the old Satellite 1900 with external DVD writer. My old Satellite has USB 1.0 only and I bought the optical disc player placed in the external case and hooked up with my Satellite via the firewire port. I was very satisfied and data transfer was excellent. I must also say that desktop DVD burners can run with faster burning speed.

  Your laptop has USB 2.0 ports, and you can use the USB connectivity for external device. If you want to use at home I recommend you to use something like this. I had the same manufacturer. It works perfectly.

• CD/DVD burner with vantec enclosure iHas424Y refreshes new media

  Win 7 ultimate 64-bit

  I ordered a recorder of Y (optiarc rebadge) CD/DVD Lite-on iHAS424 and an external enclosure, VANTEC NST - 530S 2 and try to use them together (SATA to USB2).  Links:

  http://www.Newegg.com/product/product.aspx?item=N82E16817392021

  http://www.Newegg.com/product/product.aspx?item=N82E16827106335

  The drive burns without flaw, however, the player is a little funky.  CD works fine.  Full data and video DVD with small episodes of tv series (350 MB, xvid, 40 minutes) work well, most of the time.  Full movies (mkv, 1hr30min in 3 hours, 1 GB to 4.5gbin size) will work when the dvd is in the drive bay when starting and not deleted.  I can not put a new DVD in the Bay, it will not refresh dvd data and if he doesn't give me undefined error codec (regardless of the player).  Activities of dvd are able to explore freezing.

  At first I thought oh, funky speaker/reader.  But, everything works perfectly / fast when starting and running ubuntu 9.10 and 10.4 (direct copy of each, so no frills or special features).  Tried on several laptops / PC, as an attachment. Problem with the enclosure or the drive with win7 ultimate?  Or maybe a service is disabled?  I tried the fixit thing, didn't come with anything.  I tried an update to the latest (version zl1w).  Got the drive preinstalled on ultimate, driver could not find something for each speaker.  Not defeated cables (and works on the other OS / boot).

  Anyone have any ideas?  Or just incompatibility?  It just seems like a miss-communication between the pregnant reader (?) and windows 7.  I don't have a way to test the drive itself now (can't pop my laptop open, nor have I not a turn laying around).  Any comments would be greatly appreciated.

  For those who have similar problems, it is the service Detection hardware core.  Turn the power off and everything works perfectly.

• iDVD on the part of an external DVD burner

  The optical drive on my mac mini 2009 died. I need to burn a project to a DVD. I have attached an external DVD burner for mac. I play DVD. How to record from iDVD please?

  I had a similar set on one of my Mac mini.  My internal optical drive still works fine, but I bought an external burner because the Apple optical drive cannot burn the M-DISC.  (M DISC is what we use now.)

  http://eShop.MacSales.com/item/OWC/MR3UBDRW16/

  Don't burn your DVDs from iDVD. Instead, use iDVD to create an image file and then burn the image file using the disc utilities. Utility disk will be out and find all your drives connected and it should see externally, (he does with us).

• install dvd burner lightscribe Pavilion in my HPEnvy Phoenix

  How can I install burner lightscribe dvd supermulti/cd of drivers of my old HP Pavilion a6500f to my new pc to HPEnvy Phoenix 810 - 150se dt

  Hello

  The Lightscrbe in your old PC Player uses a SATA connection by the HP documentation.  These HP published instructionswill show you how to add a second optical drive. Look for the extra power connector near the existing optical drive.  You will need to buy a SATA data cable and then plug it into an empty SATA port on the system board.  Use one of the empty SATA 3 Gb/s ports. See the image below.   You can consider wearing a latex medium weight glove to avoid scratches and cuts on the hands.

  

  The last issue is to install the LightScribe system software.  Try to reinstall underlying lightscribe systembefore installing your burning software.  In addition, you will need an application that will support Lightscribe.  Burning CD/DVD from Cyberlink or Roxio applications should support optical drives Lightscribe.