Is there an external enclosure for UltraBay series

Similar Questions

• external enclosure for lightscribe DVD burner

  I have an old Pavilion dv7 that burned, but I really like the CD/DVD Lightscribe burner and want to convert it to an external burner for use with my new laptop. Is there a case external caddy appropriate or recommended on the market that fits this disc?

  Thank you!

  Hello

  Please check the following products in your area:

  https://www.Google.com.au/search?q=external+enclosure+for+CD+drive&rlz=1G1GGLQ_ENAU282&source=Univ&TBM=shop&TBO=u&SA=X&EI=-E8FUrelFamRiQeYs4HgAg&ved=0CEAQsxg&BIW=1920&BiH=964

  They also sell online or you can find them on eBay.

  Kind regards.

• External antenna for N series 1252

  Hi all

  Can you be it someone please let me know which externally mounted antenna is the right piece to use with an AIR-AP1252 N-Series (6dBm gain or more, its to cover a level playing field)

  I scoured the Cisco web site for days to find a definitive answer and confuse me.

  Ideally it should cover both radio bands, but if it does only 2.4 Ghz, I'll settle for this that my life is ticking.

  Any idea on the wall mounts too.

  Any help appreciated

  Regards Tony

  Don't forget that you can use any antenna 2.4 GHz on the 1252. Some antennas have three cables for convenience, but in reality, there are three individual antennas inside the envelope. You can achieve the same effect by buying the same kind of antenna and so that they know the 1252.

  The AIR-ANT2506 is a good outdoor antenna and would be perfect for use with customers so it is installed close to the ground. Omnidirectional antennas are quite misleading in their operation - in fact, they form a donut type cover that gets 'crushed' gain is increased. A 5.2dBm is not too bad, but if you install it too high then the signal will go right over the heads of users. I guess I forget all that to say that you should not install it on a 20-foot rooftop pole. :)

  To take full advantage of 802.11n, you will need three antennas. Otherwise, one or two would suffice very well if you are in an environment of 802.11 g.

• are there maps external chart for compaq 610

  I have compaq 610 and it has low Graphic card is anyway I can update or use an external graphics card

  Hello

  I'm sorry, but it is not possible.

• External charger for Toshiba laptops

  Basically, I have a toshiba laptop and the connection between the charger and the laptop real is in ruins, I had this problem before and found better to just get a whole new laptop, is there not an external charger that I could buy that would work or at least a way to get my pictures off of it?
  Thank you.

  This charger doesn t exist.

  Jurgo is quite right. For a few Euros you can buy external enclosure for SATA HDDs. put your HARD drive in this case and connect it to the USB cable and another PC / laptop as external drive.

  On this way, you will have full access to all your stored data.

• Looking for the right 4 bay external enclosure

  I was wondering if a usb + 4 bay external enclosure UASP would work for my macbook pro. Bought in June 2015. Retina. 2.5 ghz, i7, with amd Radeon R9 M370X 2048 MB.

  So far, I use a box esata (Burly) with a pro and the Sonnet of echo express34 card. The Echo connection is crap. Don't want to spend more money on it. He's been solid on my macbook 2008 now former pro, but apple thought that I didn't need more. Thinking about it.

  http://www.MacWay.com/FR/product/29238/storeva-HD4-boitier-4-baies-35-USB-30-UAS p.html

  Do the research I read about some problems. The link with discs not secure. Currently living in France so there is not a ton of options. I like the storeva because it sounds like what I need and is not expensive.

  I want to just separate drives, no raid. I use ccc clone, make backups of my photo work.

  Another option, for on the road, Lycom 6 GB card esata used with the Akitio Thunder 2 pcie expansion enclosure. I think it's the combo. Found to macgurus. Connect via thunderbolt. This so I can continue to use my 5 Burly bay which still works very well 8 years later.

  Not really necessary TB cause I use 3.5 "hard drives, so I can't enjoy the speed of tuberculosis in any case. That's why I'm thinking usb 3.0

  Any suggestions? Perhaps the usb 3.0 is now developed and works as it should?

  Thanks in advance

  M

  See what OWC has to offer.  Here's a sample:

  http://eShop.MacSales.com/item/OWC/M3QX2KIT0GB/

  Note This is can be configured for four independent labels.

  Ciao.

• Are there external speakers for iPad mini to improve the sound?

  Are there external speakers for the new iPad mini to improve the sound?

  There are hundreds. For most Bluetooth, so they're wireless. Simply do a search, starting with those on the Apple Store.

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.

• I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? because I have received no series by mail, but it works well!

  I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? Because I have received no series by mail, but it works well! And he never asks me to activate with a serial number. I just pay monthly Plan.

  I ask this question because I have to change the computer and I didn't have trouble disattivate App and put it on the new pc!

  Can I turn off just from the creative cloud by disconnection of the account application, uninstall the application and then install on the new pc?

  The CC has not need any number of series, it is based on an Adobe ID.

  In the case where you are prompted for the serial number then you can refer to.

  • Creative Cloud applications ask for serial number
  • Re: Incorrect serial number?

  Concerning

  Baudier

• USB enclosure for HDD GB 900

  Nice day

  I have a HP 900 GB HDD and am looking for an enclosure for the USB adapter.

  model # EG0900FBLSK

  part # 619286-004

  I'll try to find a USB enclosure for the HARD drive and the 'standard' ones sold in big box stores do not work. It seems that the pinout have a different connector than the other HARD drives.

  at - it anyone Kow where a USB box can be purchased?

  Thanks yo.

  DH

  What you have is a SAS hard drive from a server.  There is NO direct way to jump a dedicated SAS controller card, which can be more expensive that the disc is a value.  A new Seagate 1000 GB (1 TB aka) is less than $50, one sliding USB 3.0 external in case $30 or the whole in a portable case point is only $ 57.

• Can Tecra M1 - I use my DVD drive in an external enclosure?

  Hello

  I had one laptop Terca M1. Now, I have another PC Toshiba laptop which Bay is not compatible with the M1. So I can't use my 'old' on this new laptop dvd player.
  Is there an available accessory Slim external enclosure to use my dvd drive external usb?

  Thank you

  HP

  Hello!

  Which is a good question, but as far as I know that it doesn't have these adapters.
  But you can look on eBay or ask your computer dealer for this.

  And I agree with Akuma. I think the best solution would be an external USB DVD drive.

  Good bye

• Impossible to get good resolution on external monitor for laptop

  I am struggling with this situation of resolution of external monitor for the past two weeks. Since the research I did, it is a very common question; However, I did find a solution. I tried all the solutions have not been successful. I hope someone here can help you.

  Asus K50IJ laptop

  Win 7 Home Premium 64 - Bit SP1

  Intel Core2Duo T6600

  4 GB OF RAM

  Mobile Intel 4 Series Express Chipset Family

  Monitor is Samsung SC750_S24C750P connected with VGA cable (laptop doesn't have a HDMI output)

  I reinstalled the drivers for the graphics card; current driver is 8.15.10.2302 of 11/02/2011

  I reinstalled the drivers for the monitor; current driver is 1.0.0.0 11 13, 2012

  Monitor is currently appearing as "HDMI" in the Device Manager; I have chosen "Analogue" and had the same results. Now & then I see "Generic PnP monitor" in the Device Manager. whenever I see it I uninstall it.

  Bottom line is this: settings keep bouncing everywhere. On rare occasions, I saw the picture I want on the external monitor; When I close the lid on my computer (that's why I bought the external monitor - so I can get a bigger picture, not two), the resolution is 1024 x 768. When I disconnect the external monitor, I get the correct image and ratio 16:9 (1366 x 768) on my laptop screen. When I connect the external monitor I have two choices for the resolution: 800 x 600 or 1024 x 768.

  I went to the Intel graphics properties tool and set a resolution to 1920 x 1080 at 60 Hz - 32 bit - proposed by Samsung for their monitor. Result 7 choices of resolution, no '' recommended '' and the higher tag 1366 x 768. I can live with 1280 x 720; When I choose this resolution or anything higher, the laptop screen is superb, but the image on the external monitor covers 1/4 of the screen - the rest is black. Reset the external monitor doesn't change anything.  Computer restarting does not help. Monitor disconnect/reconnect does not help. I tried this routine dozens of times.

  I really need to use the external monitor, and I need the image proportional. Is there a way to do this?

  Separated from: http://answers.Microsoft.com/en-us/Windows/Forum/windows_7-hardware/cant-get-right-resolution-on-external-monitor-for/f3680ff9-684c-428E-a6ac-74fe4171a845

  Hi, thanks for the response.

  I saw this on the Intel Web site so I tried mode extended without change.

  If I had 1366 x 768 on both screens, I would have been delighted - instead, I had two choices on my external monitor: 4:3, covering the entire screen with a distorted image, or 16:9 which covers about 40% of the screen.

  The most likely explanation I can think of is that the external monitor 4:3, I used in the past has left a kind of preference file in my computer which could not be changed, so he kept coming back to 4:3 instead of 16:9. I thought the problem might be the VGA - VGA cable, but this does not explain why I was unable to cover the entire screen on my external monitor with something other than a distorted picture.

  Using the past because I was forced to buy a new laptop. As soon as I plugged on the external monitor, everything was perfect.

  Thanks again for your help.

• What is the best solution when my external drive for Time Machine is full?

  Hello

  I use the latest version of Mac OS X on my iMac 27 ". I use a drive outside of 3 TB G-Tech for Time Machine backup. Due to my recently many RAW photo images, I have less 8% left storage on my external hard drive, so I'm trying to figure out next steps in what concerns the strategy of external storage and have the following questions:

  • When my external drive for Time Machine is full, it is my understanding that older backups on external hard drive will be deleted to make room for newer backups. If the oldest backups contained pictures (whose records have not changed since the time they are initially stored), then I guess that these photos will be removed from the external drive - correct?
  • If I had to replace my external drive for Time Machine with a new external drive which is as big or bigger than the one it replaces, what should I expect on the size of the initial backup on the new drive? I guess the size of the backup would be exactly equal to the current amount of storage used on my drive hard iMac - correct?
  • Would it not be possible to connect the external drive for Time Machine existing at a new Time Machine external drive so that when the original disk is full, the overflow will be automatically stored on the new external hard drive for Time Machine? (If feasible, it seems that this strategy would maximize my external storage capacity vs just replace external drives.)

  I realize that my first two questions are rather basic, but I don't want to make any false assumptions. The third idea is intriguing and I would like to know if this is a viable option.

  Thank you

  Brian

  older files are starting to get deleted because the disk fills up then Yes, they went

  the backup drive should ideally be 4 times the capacity of your current drive, twice is good but has its limits. Also factor in what you store: a jpeg from the web and a raw photo file are the two images, the size of a is very different. If you work in high-resolution or large native files, or audio files (record pro, no music files) or video production twice the disk fills up very quickly. If you collect photos and JPEG and mp3 files or a handful of videos not so much is necessary.

  I would keep the old drive intact if you want to replace and start over with a new drive, if that's the plan. You have the old data, you can keep it somewhere safe and have a redundant backup which you can reconnect at any time to restore from. Let the new index drive itself with new data and take if from there, in the case otherwise you can copy the backup to the new drive and set the drive as the new source of backup but personally I wouldn't copy of the data, that's my preference, it may not be yours and that's fine.

• External Editor for Photos: update is released

  The new update for the extension to "External editor for Photos" photo editing AppStore seems promising:

  

  We can change the list of external editors that displays and get rid of items that aren't really publishers.  We can also convert RAW to TIFF.

  has someone already tried this new version?

  I installed and made my list of favorites from the editors.  A feature very convenient.  If you add a Publisher/app accidentally in the Favorites control (right) - click can remove it.

  I was just on the App Store there is little time to date of other applications, and it was not listed.  You're certainly on top of things. Thank you.

  

• Recommendation for external monitor for 2009 17 "MBP

  Hi all

  I would like to get an external monitor for the time where a 17 "display is not quite big enough, but is there a limit on the size I can go? And with a 2009 MBP, would be a 4 k screen work?

  The specifications of my MBP is: 17-inch, early 2009, processor Intel Core 2 Duo 2.66 GHz, memory 8 GB 1067 MHz DDR3, NVIDIA GeForce 9400 M 256 MB graphics card

  I'm happy to find an opportunity that A1082 Apple display 23 ", but maybe I would go a little bigger. Used Apple screens are starting to become a bit expensive when there are more than 23 ", so I consider sacrificing the aesthetics of the product and get a monitor not Apple to about 27"... could anyone recommend any specific model?

  I will mostly use the screen for the design work (InDesign) and surf, so that I don't do high range editing, I'd still like the colors to be accurate enough.

  Any help is appreciated!

  Markos

  the resolution maximum support from outside is 2560 by 1600, the resolution of the movie screen 30 inch apple.