External works in the tenth

Similar Questions

• Drive external HARD NTFS does not work after the update.

  I use a drive Seagate Backup of external Neurofibrillaire degeneration. After updating to Mac OS Sierra drive is simply not acknowledged at all. I tried on another MAC with El Capitan and works very well. Any solution?

  lirioandre

  try to open disk utility and see if it "sees" the drive.

  If she "sees" the drivr then go to the finder preferences and deselect the hard drives and external drives in the menu.

  Restart your Mac.

  This sequence has worked for me.

• EliteBook 1020: External keyboard does not work in the form of Bitlocker

  We had a few HP 1020 and 1040: models recently, and all have the same question. When the laptop is connected, the external keyboard does not work in the form of Bitlocker. It works in the BIOS and in Windows itself, but not in Bitlocker. This means that we must open the laptop screen to enter the Bitlocker pin, then let it open and GPO that dictates the computer into hibernation when the lid is closed. We have twisted the GPO, but in vain. Anyone else seen elsewhere or a solution?

  If the bios is up to date, I would look at the BIOS settings. I think that Fast Boot is enabled in your case, this may cause usb devices not to see in the stadium that BitLocker requires

• Close the lid on my laptop and continue to work on the external monitor.

  I am running Vista on a Dell Studio. I have connected external monitor. I would like to close the lid on the laptop and continue to work, but the com puter shuts off when I close the lid. I have a Dell Inspiron 6000 with an options for no action when the lid is closed.

  Hello

  Control Panel - Power Options - Choose top left - close cover.

  Also check the power Plans it after changing the Panel above - or to the right
  (White) Change Plan settings and also check the advanced settings.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot use the internal mic. External microphone works but the sound is not very loud.

  Original title: microphone

  My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Try to run auto Locksmiths and check.
  Reference: http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Set the default Microphone.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
  d now check if the Microphone is listed there and right-click on it and choose Activate.
  e. Select the Microphone, and then click "set as default"

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  You can start in safe mode and restore the system.

• + Configuration LR to work out of the Photo files on external drive from the beginning very +.

  Hello!

  I have LR is trying to see how the workflow.

  I'm working on a project, I need to select the final images to use in the project of as a value of a year of photos.

  My main interest is using LR at the moment.

  I have all my files on an external drive.

  + First step is to import and then adding them to a catalog on my internal drive.

  + I select 'building intelligent insights' so I can work in offline mode

  Then from there, the process of selection and Keywords, etc..

  Does this sound right?

  ~ If I have other projects, I would create a separate in my computer for each project catalog?

  ~ would be metadata that I added in LR only incorporated on the files I use LR?

  I want to say is,

  If I was to go in my external drive from the desktop and place an image,

  What is metadata?

  Thank you!

  Sounds good.

  I suggest working with a single catalog only.

  LR does not change the imported originals - non-destructive workflow.

  You can write changes to a sidecar XMP file: basics of metadata and the actions in Lightroom

• How to save a work in the external directory in the workspace 11.1.2.1?

  Hi all
  
  I use the 11.1.2.1.600 workspace and I'm trying to set an external work output directory, but I don't get to put it.
  
  I click on Navigate-> program-> batch schedule and choose my batch file. Then I right click on it and choose properties after you fill out all the information that I reached the Destination optionn and choose 'Export to PDF' and 'export to an external Center. " But I want to redirect to another directory.
  
  How can do this? Could anyone help on this?
  
  
  Thank you
  
  Concerning

  An export file must be defined by running frconfig.cmd, Syntax details are available on page 17 of the

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/fr_webadmin.PDF

• I have a Sony DSLR-A300 and I can't get an external flash to work on the shoe mount.

  My problem started when I realized that I had a seated old flash Achiever TZ250 around that I used to use on my old film camera Ricoh KR-5 DSLR. Obviously, the mount was different, so I bought a hot shoe adapter, but the flash does not fire. I thought that even if he was still working very well on the old SLR, that he was probably too old an era Flash to work on the new system of claw so I ordered TT520 Speedlite Flash online that I thought would be more consistent on the claw adapter. As soon as it arrived I unpacked and tried, but to my great disappointment I do nothing that can make the fire upwards. It tests fine, but it doesn't fire at all. Is there something I don't? Is it something with this camera I'm missing? Help, please.

  Kind regards

  Andrew

  Amanda, that I had a look that link and not found very relevant because it is not related to my model. I got from a claw of replacement adapter and I still can't get the flash fires. It's as if there is no power going to the Mount of the brand at all. The camera would be defective?

• work around the internal security gateway and the same url for web access external and internal

  role of the broker 1 quest
  1 security with the roles of web access gateway
  1 Server terminal server

  I configured the default gateway with the parameter security rule: "vworkspace security gateway".
  I created a custom with the 172.16.1.177 value rule (it's my client internal windows7).
  When I navigate to the internal url (fqdn's secure gateway server) I bypassed (tsdebug shows no sslgateway).

  But now I want to use 1 internal and external URL to type the same URL.
  Now when I navigate to an external URL of the machine internal with above ip I always get through security gateway, I see a SSLGateway

  Hi Erik,

  I think that this has been fixed in our latest version 8.5 - documents.software.dell.com/DOC252107

  Please download and upgrade your farm and let us know if you still see this problem.

  If you do, it may be best to save a service request so that we can see exactly what is happening.

  Thanks, Sam

• The screen works not the Satellite Pro a

  My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850
  When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.
  I tried removing the battery, now the Start button / stop for 45 seconds etc... That did not work.

  I tried to start and stop a lot of times, it starts the desktop computer, I can hear the sound of it connection, but it seems to take more time for the sound to happen now and it seems to the connection ring twice, 10 minutes apart.

  One of the moments where I turned it on it the screen worked and it has loaded the system recovery, I chose to keep my existing files and the partition, the screen worked for the half-hour it took to recover windows, then when it restarted the screen wasn't working again...

  It's very frustrating as a week ago, that the laptop was with Toshiba repair, there is no previous problems with the screen, I sent him with a cooling fan failure...

  Any help would be appreciated, I need laptop badly I work online and need to pay the rent...

  Sorry to hear that very annoying if computer laptop / computer starts to malfunction.
  From my point of view, no one here in the forum would be able to help this issue, because I think that there is something wrong with the hardware.

  You can connect the external monitor just to check if something is not visible on the 2nd screen but of course, this would not correct the problem of the laptop.

  Maybe the problem is related to the last laptop repair? You said that the laptop has been send to the service about a week ago, it's just a guess, but maybe the technician made some mistakes last time who knows that I recommend you to get in touch with the guys again

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Touchpad does not work on the Satellite L50t-A-131

  All,

  My touchpad has stopped working. The light of the little mouse in the upper left corner is off. When I attach an external mouse pointer appears again and everything is fine, when I remove the mouse pointer disappears again.

  I accidentally turned off in the past by pressing F5, but that doesn't seem to be the issue this time.

  I have recently upgraded to windows windows 8.1 8 and do not know if this may be a factor

  All advice welcome

  We start with basic stuff. Touchpad is correctly recognized and listed in the Device Manager?

• Numlock stops working on the Qosmio F750

  Hello

  I have a Qosmio F750-11 t. Four days ago, I started my laptop and discovered my num lock stops working. The light still comes on, but the buttons do not respond. I can't turn the NumLock or off and I can ' t produce numbers more with him (or use the pgup pgdn buttons when it should be off).

  I have read a few things on the forum (.com) and updated the BIOS to the latest version, restarted it, but nothing works.

  I bought the laptop 3 months ago only. I would be grateful if someone could help me with this.

  Thank you!

  Post edited by: Tino.Bos

  Hmm, I would say that its dysfunction of the keyboard.
  You can use the Num Lock button using an external USB keyboard?

• Satellite Pro L20 external monitor as the primary device?

  Hello.

  I want to configure my computer to use an external monitor, it works very well to extend the desktop on the external monitor as one long section.
  But what I want is to use the external monitor as the primary device and the display on the laptop as secondary and extended desktop part. These choice is already in the prperties of the configuration screen in windows xp, but they does not work.
  Is there som kind of updated driver or utility separated to resolve this problem?

  RGS.
  Frank

  Hello

  As far as I know it of not possible to set the external monitor as a main display and the screen of the laptop as secondary display.