Extract VI bug

Similar Questions

• Adobe extract new bug in details!

  Hi all

  It's new and deadly boring:

  I was working on some assets for a retina iPad application.

  I use the Adobe online service extract.

  I used files PSD 2048 x 1536 with the parameter "designed to 2 x" worked perfectly. It's like having a psd in 1024 x 768

  Since today morning it's all over. Extract reports correct sizes. But when in 2 x report all coordinates DIVIDED BY 4!

  Example: I have a trump card "designed to 1 x:

  Width: 1164px;

  height: 811px;

  top: 160px;

  left: 578px;

  While it reports today, when "designed to x 2.

  Width: 582px;

  height: 406px;

  top: 40px;

  left: 145px;

  Hi Arturo, this bug should be resolved now and on our production servers. It was actually fixed a few weeks earlier, sorry for the slow update here.

• Extraction of data from XMLType field

  Sorry, I am not sure XMLQuery, this is probably a simple question.  I am trying to extract data in a tabular form of an XMLTYPE field.  I will use the following example to illustrate my question:

  WITH a (too)

  Select xmltype (')

  < bugStatus >

  < status >

  < > 111 bugCode < / bugCode >

  < number of bug = "12345" description = "Low severity bug" / >

  < / status >

  < status >

  < > 222 bugCode < / bugCode >

  < number of bug = "67890" description = "high severity bug" / >

  < / status >

  < / bugStatus >

  XMLDATA') of double)

  SELECT x.*

  A xmltable (' bugStatus/status

  by the way the columns in a.xmldata

  status_code number path "bugCode.

  ) x ;

  Run this code extracts block the "bugCode' fields successfully.  But I would also to extract the 'bug number' and 'description' fields.  Ideally in the independent columns.  But even if only as a single line 'number of bug =... description =... ". "I could still do it analyze with SQL.

  Can someone tell me please in the sense of how I can also extract additional data?

  Thank you!

  Attributes are processed by '@' so in your example (thank you), you can solve it through

  WITH a (too)

  Select xmltype (')

  111

  222

  XMLDATA') of double)

  SELECT x.*

  A xmltable (' bugStatus/status

  PASSAGE a.xmldata

  COLUMNS

  ROW_NUMBER for ordinalite,

  path number bugCode "bugCode."

  bugNumber path number "bug/@number."

  path of varchar2 (4000) bugDescription 'bug/@description '.

  ) x ;

  ROW_NUMBER BUGCODE BUGNUMBER BUGDESCRIPTION

  ---------- ---------- ---------- --------------------------------------------------

  1 111 12345 low severity bug

  2 222 67890 high severity bug

• minor bug extracted from vi?

  I created an excerpt, but the content of a constant of cluster has not been posted in the png, but it shows up if I dragg in a diagram.

  

  It happened with a cluster "selfmade". But if I do a constant to create on a sinusoidal waveform, mark it and create a snippet that I get the result that you see.

  LV 2009 f 3 on XP

  There is already a CAR for this bug. See this thread/message.

• Satellite U200 163: BIOS download 3.40-&gt; XP-Linux BIOS bug resolved

  I was told there was no bug with 3.30, but these are the changes (extract from Toshiba U.S. web site):

  * Added CPU support: optimized the thermostat during low temperature operations.
  * This BIOS supports the Windows XP and Vista.

  It was not the case before?

  Found on the Toshiba site we (that, I tell you once again, gives more information on changes in bios):

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlView.jsp?soID=419258&MOID=1277449&BV_Sess ionID=@@@1274207095.1171787409@@@&BV_EngineID=cc ciaddkejmhedecgfkceghdgngdgmm.0 & ct = SB

  3.30 bug maybe wasn't lack of Linux? ;-)

  [Edited by: admin]

  Cool thanks for the info.

• bug in the worksheet to the table?

  Hello!

  "So, reading a html file and extraction of a table, I used the string to the worksheet with.

  "In some way, I got a blank line and a column blank and it is reproducible with a starting chain control by.

  / Yamaeda

  I think what you're saying, is that if the string begins with the delimiter, you get an empty element (if you set the separator ',' and feed him ', 5.8' you get ['',' 5 ', ' 8']).  I call not this bug, as there might be cases where you want an empty element (for example, an empty string) in a list, and this empty element could be the first element of the array.

• Possible bug in sv_Harmonic distortion and Noise.vi

  Hello

  I ran into what seems to be a bug in distortion and Noise.vi sv_Harmonic

  I call this VI into a higher level VI which is part of the box sound & Vibration tool (SVT SNR without harmonic (time) (1ch) .vi)

  What is happening is that I sometimes get error 0xFFFFB1A3 (-20061):

  Error-20061 occurred at NI_MABase.lvlibine Waveform.vi:22 > NI_MABase.lvlib:ma_Trap Fgen parameter Errors.vi:1
  frequency must be<= sampling="">

  Possible reasons:

  Analysis: The selection is not valid.

  This error is actually produced in distortion and Noise.vi sv_Harmonic by one of his subVIs (your unique information (complex) .vi svc_Extract) although I'm not able to activate debugging for this VI so I can't dig deeper.

  What seems to be the case, it is for certain fundamental frequencies that result in higher order harmonic which is located very close to Fs/2, you get the error.  I have attached a waveform and a simple VI that generates the error.  My debugging, it seems that the error occurred when the code attempts to extract the harmonic at 5119,53 Hz.  FS/2 is 5120Hz, so it must be valid, but generates an error.

  Thank you

  -mat

  Hey Matt,

  I spoke with R & D and the source of this problem is we're detects peaking at exactly the Nyquist frequency for the 127th harmonic, while it should work, we get the false error. To work around the problem, you can specify the frequency range of 0-126 harmonics as seen in the image below.  Have one less harmonic should not be a big problem as the harmonic 127th is anyway in the noise.  R & D is now aware of the issue and look forward to it.   Thank you!

  

• IMAQ extracted buffer is suspended in an ongoing acquisition with PCIe-1429

  I acquire images of 500 x 500 pixels at 1000 FPS from a camera of the Basler A504k using a PCIe-1429 (LabView 8.6, x 64 Vista). The images are processed online, and all works - some time. From time to time the program and out of just to extract vi buffer never gets. No error is produced. I need to kill Labview and restart it to leave. I read http://forums.ni.com/t5/Machine-Vision/BUG-with-PCIe-1429-Cameralink-full-config-Basler-sprint-lines... and implementation of the proposed solution, but no luck. I followed the lost images and buffer number called and can't find any problems. My VI is attached. The images, go to a queue and treatment by another part of the program. Any help will be much appreciated.

  Thanks Vinod,

  Another thing is that the structure of your program looks a little broken. You are extracting tampons from the ring, put a reference to the image in your queue, and then going back and extract a different buffer. This means that your previous buffer is no longer checked and could be replaced, but your loop else may not have finished processing this image yet.

  While this should be causing your current problem, but I thought it is interesting to point out. I think I have two queues of the source images. One that contains free images and one that contains the populated images. You producer loop of who you've given here would consume the free queue, take in one of these images, and then place it in the populated queue. Your consumer loop would be remove from the populated queue, process the image, and then put the image in the free queue.

  Eric

• Extracted from LAVA - crush keeps old date/time of the png file

  I don't know if this is a bug, or to behave like that.

  Scenario: create an extract using the tool of LAVA. I just use the same name (and path) of an existing png file that was created by the same LAVA tool a few days before also (so I replaced the original file). I opened the case, and to quickly find the newly created excerpt, I ordered the files as a descendant by time and date. To my surprise I couldn't find the code snippet in the upper part. The reason was that the new file kept the date/time from the original one.

  This is a really minor thing, but it made me curious. Under windows, when I rename a file, it retains the original timestamp. However when I crush him, it updates.

  LabVIEW 2015 (32-bit),

  Code Capture Tool v3.2.1 - 46 lava

  As I said, look at the code of the COMMON customs tariff. The only thing I can think of that would make it interesting is the code snippet, which is a flow within the PNG file, something that the VI of shipment is not compatible. I don't know more how it's done exactly - it might be created under the PNG in memory and then writes to the file directly or can be injected into the file after shipping VI saves it.

  Either way, I just did a test fast in Notepad and if I do record under and tell him to replace an existing file, the date of the creation of this file does not seem to change so this seems to be normal behavior for Windows. I don't know if the Windows API file deletes the file and creates a new or simply modifies the existing file when you perform this operation.

• HP C4280: Critical bug in software on the systems of skylake C4200

  Hello

  I just found a critical bug in your software for HP C4200 series (4.exe - PS_AIO_C4200_NonNet_Full_Win_WW_140_404 or PS_AIO_C4200_NonNet_Full_Win_WW_130_140.exe).

  I just bought a new computer with a CPU skylake. Intel has removed USB 1.1 and 2.0 controllers on those systems, and only USB 3.0 is present. When I try to install the HP software, HP C4200 series setup just does not detect USB 2.0 controllers in the system and refuses to install. It is a mistake because the USB 3.0 controller can of course operate in mode 2.0 (and 1.1). Y at - it an option to run the installer to get verification of the 'minimum requirements '? It is a critical bug, I can not install the HP drivers/software in my Windows 7 system.

  Thank you and best regards,

  Iker.

  Hello

  Of the installation folder extract HP Open the Setup folder and rename usbready.exe to usbready1.exe.

  Next go to a higher level and tun the executable Setup.exe, the installation should now ignore this step.

  Shlomi

• MapView onMapLongPressed (coordinates) bug?

  Hi, I'm not sure if I'm doing something wrong or is a bug in MapView class but I am not able to retrieve information about the coordinates on a long support class MapView.

  https://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__maps__mapview.html#function...

  Acoording to the documentation, the signal of onMapLongPressed returns an object to coordinates (geo/Point class) that contains details about the location where the user long pressed.

  The returned object is undefined.

  Help, please!

  Hi @xapel,

  I could not extract data from GeoPoint via QML. I had to pass the returned object (const bb:latform::geo:anointed & coordinated) of C++ and extract and then send it to QML for use.

  I hope this helps.

  BAS.

• BlackBerry smartphones various bugs

  I am without the use of a Palm PDA to a Blackberry Storm.  I used memos to contain a lot of information for me; some of which I've often updated.

  Memo list screen:

  1. Although the filter is a pretty nice feature to drill down to the note that you want to change, it would be nicer if there was a scroll bar on the right side of the screen so that you could quickly drag it to the approximate location.  It would be much faster to enter a filter.  There is a scroll bar appearing on the right side of the screen, but it doesn't do anything else than to display; He has apparently no use.

  MEMO Editor:

  1. I discovered that although I can view the whole memo in MS Outlook, the storm would show me only about 20 k to a value of each file.  I had to split up dozens of memos, so that all the information would be visible and editable on my Storm.  When this limit will be increased?  Or how to increase the limit?

  2. a supplementary bill bug is in landscape mode it does not scroll properly.  When you drag your finger up and down to scroll a page it works sometimes and then other times it suddenly takes back you to the top of the memo (this after you have navigated to the bottom of 10 screens).  I think that happens when I touch the screen lightly, he seems to think that I want to edit the memo rather than the cursor is when you first open the memo.  This problem does not occur in Portrait mode.

  3. There is no scroll bar on the right side of the screen you can drag quickly position the screen in the middle of a 20 k file.  Instead, one must drag one screen at a time...

  4. in addition, there are no icon, or something to allow you to take you immediately to the top or bottom of a memo.

  Password feature?

  1. the storm block even if I have not pressed the lock button, or press the lock icon.  I would have preferred that it crashes only when I want it.  It's annoying that almost every time I have to pull it out of my Holster that I have to unlock it.

  Phone Bug

  1. when I call my voicemail, Messaging voice robo-voice invited me to enter my password followed of the #, but it does not display the keyboard for me and at the time where I can get the keyboard displayed the robo-voice has run out of patience and informs me that I am too late.  However, I have concluded that the appropriate setting and so it should not invite me, does it?

  I suggest you use DocumentsToGo instead of memos... and use any PC Sync app on the PC folder to synchronize documents between your PC and your press card. Much more DocToGo function.

  The confinement, to by pressing the locking button on collecting in your case. It is on the top edge of the BB, be aware of this and you should not have any future problems there. I never locked onto the extraction of the Holster.

  For voicemail, you should be able to program your password in the dial string and end with you enter it manually.

  Good luck.

• Cannot find path during extraction from CD to computer

  original title: problems with CD extraction

  I'm trying to rip CDs to my laptop and my laptop hard drive. When I insert the cd and click on copy CDs, he says that he can not find the path. I checked the box options and where it should show the way, it's white and I can't add by clicking on the button Edit. HELP Please

  Laptops get dusty, you could try blasting carefully inside the car with compressed air where the dust is to play with the laser lens or internal to the drive.

  Otherwise the drive can read discs that you insert into it? If not, you can try to visit the support site of the manufacturer of your laptop, enter the model number, then look to see if updated drivers are specific available on the CD drive, USB, chipset, etc. This could be a symptom of a bug that has since been fixed in a newer version of the driver.

• HFM SmartView Bug? HsGetValue retrieves the data for non-existent entity node.

  Hi guys,.

  We are facing a problem of SmartView 11.1.2.5.520 in combination with HFM 11.1.2.4.103. I would like to know if you can reproduce it.

  Assume it's our hierarchy of entity:

  Parent1 (EUR)

  Child1 (USD)

  Child2

  Child3

  Parent2 (GBP)

  Child4

  Children5

  We want to extract the data via "HsGetValue" for in < currency Parent > Child1, so need to entity to return node information: "Parent1.Child1." Works very well.

  Strangely enough, that's good, that the Parent2.Child1 data retrieves, although node do not exist!

  If you try it with ad hoc, an error message appears saying "Member does not exist", which is correct.

  Can someone check the BUG? If so, I'll open a SR.

  Thanks in advance!

  Carmonte

  Thank you guys! You responses helped me to understand that he is not really a bug.

  • HsGetValue retrieves a nonexistent node of to data from first available parent in the hierarchy.
  • Top of to HsGetValue retrieves no data. What is good.

  Knowing that, I can live with that.

  Thank you!

  Carmonte

• PeopleCode extraction in a group

  Hi all

  I am currently on HRMS 9.1, we are facing a bug in one of the notification of workflow. This problem is fixed in the #4 Bundle, but we are not able to apply any package to the system that we would have to do a lot of catching up to her.

  That a single Application Package PeopleCode has been affected by this bug and we intend to apply the hotfix only to the PeopleCode.

  While the copy of the project from a file folder, we can select Application Package PeopleCode, but which would also average all the Application Package PeopleCode of the Group would replace an existing in the system.

  I there some way to extract only the individual beam PeopleCode and the same applies to our environment?

  Thank you

  Vimal

  If you just want to copy a specific object in a group, you can simply copy the definition of the file first by deselecting all types of objects. In the app designer clear indicator of upgrade on all objects except the one you want and save the project. Copy file again and this time you will be prompted to use the definition of the project from the database or the file - choose database and it will use indicators of upgrade you just put. You can also uncheck the types of objects that you are not interested.

  After the definition of the indicators of upgrade and to save the project, you can check the project settings by using the following SQL code:

  Select * from psprojectdefn where ProjectName = "PRJnnnnnn" and takeaction = 1;

  As Alex said, you could also extract the peoplecode directly from the project xml file - just note that you will need to modify the code to convert encoded characters as "and &er; for real characters."

  Kind regards

  Bob