Extreme problem USB 3.0 on Windows

Similar Questions

• My 4 GB USB shows this error "Windows has stopped this device because it has reported problems. (Code 43) ». How do slove this problem pls tell me

  My 4 GB USB shows this error "Windows has stopped this device because it has reported problems. (Code 43) ». How do slove this problem pls tell me

  Try the USB device on another computer.  If you get the same error in another computer, then the unit has probably missed and the files that it contains are lost.

• Avoid opening every time Lightroom that I plug a USB device into my Windows 10 machine?

  Hello

  I've recently upgraded to win 10 and now I have Lightroom CC opening every time I plug a USB key in my machine regardless of what is on the USB device. I tried to disable all the options in Lightroom without success and any internet help either gave no results. It is extremely boring and tedious since most of my USB devices have nothing to do with my photos!

  Kind regards

  Mirko

  Hello Sarika,

  As I mentioned in my post, I had already tried that I tried and it does not solve the problem. The solution is to disable the USB AutoPlay feature in Windows 10

  Kind regards

  Mirko

• installation of El Capitan in a mac by usb, but only using windows to create the USB

  installation of El Capitan in a mac by usb, but only using windows to create the USB

  I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive

  I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.

  If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.

• External Toshiba HDD problem. Something wrong with Windows I think.

  Toshiba ALU 3.5 "1.5 TB external HARD drive problem
  Hello!

  I'm having a problem with a new external HARD drive, I bought a couple of months.

  The HARD drive is recognized by Windows XP as a disk 3,5 '' HARD, but then he invites for drivers and never.
  They say drivers should be on the HARD drive itself, but my computer does not access the drive and never
  He attributes a letter or anything like that.

  The disc works on all the other computers I've tried with. My computer is since 2006, so maybe
  It is an age problem. I do not know.

  I drive came as FAT32 and I tried to format it in NTFS, but it does not work.

  I have completely updated the DELL drivers (bios, chipset, etc) and Microsoft (SP3/etc), then it cannot be a problem of drivers, it can?

  MORE DETAILS:

  Hey guys, it seems that the problem is more complicated. Here are two other discoveries that later, I did:

  I accidentally uninstalled a USB root hub, and all of my usb devices stopped working. I had to read on how to re - install, and most of the people, said that Windows should do it by itself. There can be no. So the next thing I did was uninstall all the USB controllers, on the assumption that Windows XP should reinstall automatically thereafter. Windows did not have this too!

  Although Windows has detected something, it does not recognize as a controller and have not installed the drivers for them. I had to manually tell Windows to look in C:/windows\system32\drivers and C:/Windows/c:\windows\servicepackfiles/i386 to each controller. It was tiring.

  I finally reinstalled all my usb controllers and my webcam works well again. But has not fixed the problem HARD drive.

  This is related somehow the problem of HARD drive, because I plugged my hard drive to a friend's computer and tried to put my computer on a USB key. Guess what, the USB is noticed by windows, but not recognized or installed in 'my computer '. The same story!

  I must tell you that in early December, I removed an old Go 700 Siemens drive of my system without "Safely uninstall" and it crashed HARD drive. Now, I realize that this accident probably missed my copy of windows, or my computer. I'm not sure of that... ?

  I believe that all these problems are related. It seems centered on the ability of Windows to detect large storage via USB devices. My webcam, for example, works very well.

  Well, I'm always working hard to solve this problem, but if you have any ideas, please let me know!

  All the best,
  M.

  It seems that you have already started the discussion on the same issue in another thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=198714

  Please don t create several threads on the same topic and follow the first thread to avoid misunderstandings!

• G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

  Hello
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07Hello,
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07

  EDWARD07

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

  To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.
  
  But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• How can I download data from key USB flash to a Windows 7 computer

  I need to transfer some files from my PC to my PC Windows 7 Windows XP using a USB flash key. I've used Windows Easy Transfer to move my files without problem and some programs but did not download some files. I downloaded these files on a USB flash and I can access the files, as long as the stick is pluged. How can I download data from the USB flash on my Windows 7 computer

  Hello

  The following video may help:

  http://www.YouTube.com/watch?v=hrMQh0Xkpvs

  or this article:

  http://www.swarthmore.edu/documents/administration/its/how%20To%20Use%20A%20USB%20Flash%20Drive.PDF

  and here:

  http://TECHTIPS.salon.com/use-USB-flash-drive-transfer-files-PC-Mac-2544.html

  (Mac here can be a PC).

  Good luck.

• USB device recognized on Windows 7, but not Windows XP

  Last week, some of my USB devices need not be recognized on my Windows XP SP3 laptop.

  First of all, it happened with 2 external USB HDD connected via a mini USB hub. Connecting them individually did not solve the problem. The error I got was:

  USB device not recognized. One of the USB devices attached to this computer has worked and Windows does not recognize.

  More importantly, the laptop is no longer recognizing my USB thumb drive, which works perfectly on my Windows 7 machine to work.

  Can I reinstall my USB drivers? Just remove the USB devices, reboot and let Windows reinstall them? They need to be specific to the manufacturers of the drivers?

  I deleted it and reinstalled my hubs USB Device Manager etc, but a device is not installed correctly: mass storage controller. It is of course preventing me from accessing the USB and external hard drives. Where can I get the drivers for this if Windows XP does not have? Sure that the key USB is FAT32 (the default format) I went in the properties of the mass storage controller in the Manager of peripheral and copied the device ID. I did a Google search and was surprised to find that it was a card reader. I downloaded the drivers from my manufacturer Web site, and Windows has detected and installed the drivers for the card reader, as well as the mass storage controller. The USB appears in the Explorer, but shows 0 items. I have After the reboot, the USB is not in Windows Explorer, and when I unplug and reinsert an error comes up saying the USB device is not recognized and malfunctioned.

  The solution was to turn off the laptop, remove the power cable and leave it for a few hours, before feeding it back.

  Windows detected and installed the device very well then.

  I don't think that I understand perfectly why he fixed.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Peripheral USB has malfunctioned. Windows does not recognize it.

  Peripheral USB has malfunctioned. Windows does not recognize it.

  Hello

  ·        What is the exact error that you receive when you try to connect USB?

  ·        Since when are you facing this problem?

  ·        Which device you are trying to connect via USB?

  ·        This problem occurs only with a USB device or USB devices?

  Method 1:

  You can try to plug the USB key into a different USB port and check if you face the same problem.

  Method 2:

  Also I suggest to Uninstall USB controllersfrom Device Manager and check if it solves the problem. To do so follow the steps below:

  (a) click Start

  (b) the Device Manager type in the search bar and press ENTER

  (c) in device manager, go to the bottom and double click on Bus USB controllers, this will open a list of USB controllers to uninstall all controllers and restart the system this will reinstall all USB controllers again.

   

  Method 3:

  I also suggest to run the difficulty he provide in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 4:

  You can also try to update the latest drivers for chipset on the motherboard manufacturer's website.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also check out the link below:

  http://support.Microsoft.com/kb/555375

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't uninstall Zoom of USB Modem on my Windows Vista computer

  I have problems to uninstall the Modem USB Zoom on HP Windows Vista Home Premium computer, it does not give me any error message. He asks me to continue and click on continue and then it comes back from the beginning. EarthLink advised me to uninstall this because I can't always connect to the internet. I bought a new USB Modem since it was corrupt, and in order for me to get installed it, I need to have the old driver to be uninstalled.

  Please help me on this. Thank you!

  Hello

  I suggest you follow the methods and check out them.

  Method 01:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Method 02:

   Uninstall or reinstall a device.

  http://TechNet.Microsoft.com/en-us/library/cc753699 (WS.10) .aspx

• The formidable problem of Connectivity Bluetooth in Windows Vista continues to baffle. Here's my story and the cry for help!

  System:

  Dell XPS M1530 - Windows Vista HP SP1

  Device Manager:

  Bluetooth radios
  -Dell Truemobile 355 Bluetooth + EDR (driver 6.0.6001.18064, 21.06.2006)
  -Microsoft Bluetooth enumerator (driver 6.0.6001.18064, 21.06.2006)

  Other devices
  -Device Bluetooth device
  -Device Bluetooth device
  -Device Bluetooth device
  -Device Bluetooth device
  -Device Bluetooth device

  Additional information:

  There are NO NOKIA SOFTWARE currently INSTALLED.  I had the version more up-to-date of Nokia PC Suite installed earlier today, but I uninstalled it to rule out it as the cause of the problem.

  Objective:

  To be able to connect my phone Nokia E50 in my XPS and synchronize etc...  It's a thing that I was able to do in the past (not sure how long ago), but now I'm having these problems.

  Problem:

  When I turn on my Bluetooth connection it starts to search for drivers of devices at random (see above).  He is unable to find the drivers for them and Windows problem reports & Solutions (WPRS) says that there is a problem with my Nokia cell phone.  However, as above, I uninstalled Nokia PC Suite and Nokia ALL entries from the list of programs in the control panel.

  I'm also be prompted by WPRS to consult the Broadcom website for driver updated also, but surprise surprise their Bluetooth software upgrades are not available now.

  I spent almost 3 hours to try to rectify this problem until today and I have tried at least four different solutions of various Web site, including this one.  From what I've read, it's an extremely widespread problem that seems to have no infallible solution, which is a bit ridiculous because it is only a problem of Bluetooth connection!

  So my questions are:

  1. Why is it I'm being invited to check the Nokia website when all of Nokia is uninstalled?
  2. Why is it I'm being invited to visit the site of Broadcom also?
  3. why my system tries to install five devices that do not exist whenever I power on Bluetooth?

  I suspect that it is a problem of Microsoft or Dell but don't seem to be able to solve.  All my drivers in Device Manager are up to date (at least I said that when I try to update, although I'd like to think that there has been updates since 2006?) so unless there is some hidden updates on the wwweb somewhere that I can't find so I'm puzzled.

  I know that people are probably sick of hearing about this problem, but it has not disappeared, so he needs to take care.

  Thank you for reading!  Signing the Ireland...

  Ronan:

  Hello, Ronan,.

  Thank you for visiting the website of Microsoft Windows Vista Community.

  I would like to respond to three questions of your message:

  1. Why is it I'm being invited to check the Nokia website when all of Nokia is uninstalled?

  It is possible that your software Nokia my not completely uninstalled. There may be services or registry information left behind. You can download the following utility and uninstall completely.

  Download the Windows Installer CleanUp tool to uninstall any remaining Nokia information.

  Installation of the Windows Installer CleanUp tool:

  Find the tool here: http://support.microsoft.com/kb/290301

  When you install the tool, you must be logged on as administrator of the machine.

  After you download the ms1cuu2.exe on your desktop, you will need to right-click on it and select "Run as Administrator" and you will need run the Windows Installer CleanUp utility from the start menu. It will be under programs and will be called "Windows Installer Clean Up.

  2. Why is it I'm being invited to visit the site of Broadcom also?

  Because Dell uses Broadcom, more than likely, you will be redirected there after installed Dell printer the standard utilities trying to solve this error message Bluetooth that happens.

  3. why my system tries to install five devices that do not exist whenever I power on Bluetooth?

  After you uninstall the Nokia Software completely, see if that solves the problem of device.

  I would also recommend, contact your provider of cellular service to support more.

  Here is more information on troubleshooting Microsoft bluetooth connectivity problems: http://windowshelp.microsoft.com/Windows/en-US/Help/11a74104-645d-40d4-b933-bde5d15537bb1033.mspx

  Please let us know if it works for you.

  Theresa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the message "device USB has malfunctioned and windows does not recognize it" when I connect my Ipod touch to load or put music on it.

  Original title: legacy A USB has malfunctioned and windows cannot recognize him does that mean?

  I get this message when I connect my ipod touch to load or put music on it. It worked before on both of my computers and I have not changed anything on one of them. I even bought a new usb cords just in case that was the problem, but still no luck. the funny this is that the battery in the corner of the ipod looks like he got some fees, but I'm not sure because of the message. I soft reset it and hard reset it I tried to install the new updates, but it is said that it is up-to-date. It is therefore unknown on my computer device how do I? someone please help.

  Hello
   
  The problem is specific to the Ipod?
   
  I wish that you follow all the steps in the article apple to fix the problem.
  http://support.Apple.com/kb/TS1538?viewlocale=en_US
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• USB 3.0 flash drives doesn't work is not on the USB 2.0 in windows 7

  My kingston USB 3.0 does not no flash drives or supported on USB 2.0 in windows 7 and 'The window error' occurred: Windows found driver software for your device, but has encountered an error trying to install.

  Hi Faisal,.

  What is the brand and model of the computer?

  You will need installed USB 3.0 drivers on the manufacturer's Web site work with the USB 3.0 flash drives.

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  This problem occurs because the USB 3.0 device is not completely inserted in the port.

  The USB 3.0 supports the devices USB 1.0, 2.0 and 3.0. The first layer of pins inside the USB connector are for USB 1.0 and 2.0 ports. The second layer of pins inside the USB connector is USB 3.0 ports. Therefore, to resolve this problem, make sure that the USB 3.0 device is inserted in the port.

  Method 2:

  Uninstall and reinstall the USB drivers and check if it helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box and then click OK.

  (b) click on the Hardware tab.

  (c) click on the button Device Manager.

  (d) expand Bus USB controllers.

  (e) each device under the node Bus USB controllersright click and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  We know the results.

• USB issues after installing Windows 7

  Hi guys,.
  Yesterday I upgraded my Vista 64-bit for Windows 7 64 bit PC. I did a clean and updated installation in the form of my readers in the process. Everything works fine except one thing.
  I bought a new audio interface for recording and playback of music. It's a Focusrite Scarlett 18i6. I installed all the software including updates since the Focusrite website and everything seems to be ok. I started to play music from itunes to test it and it worked well for a couple of minutes, then it disconnects just himself.
  It shows that it is connected in the Device Manager and the windows volume control panel. But it disconnects from the control panel of mixture of Scarlett and itunes stops playing because it no longer recognizes that there is an output device.
  The only way to let him play again is to unplug and plug back the power of the interface, and then it will work for a few minutes or a few seconds.
  I tried to update all my drivers in Device Manager. Unfortunately Acer does not all the drivers for my PC and windows 7. (Aspire X 1700).
  I have downloaded all Windows updates.
  I even tried to reinstall Windows 7.
  I'm trying this with nothing else installed on my pc is not a software conflict.
  I have an old XP computer, age about 6 years old and works like a slug, but it works with the interface very well. So I know that the problem doesn't lie with the interface.
  I saw somewhere that there is a known problem with USB drivers when using Windows 7, so I downloaded the patch, but it is said that it is not necessary on my PC.
  I'm very, very close to buying a new PC that I don't really want to do until I'm sure it's a problem with my PC which can not be repaired and that the same thing won't happen with a new Windows 7 pc.
  And Yes, my interface is compatible with Windows 7.
  Any help would be greatly appreciated as I have tried everything I can think.
  Thanks in advance.
  Emma

  Hello

  Hello
  You don't have to remove the keyboard and mouse USB. Try to reinstall the USB controllers. Visit the site of the manufacturer for the latest available drivers.
  http://support.Acer.com/us/en/product/default.aspx?tab=1
  As you mentioned that Acer has no drivers for Windows 7, you can install the drivers for the chipset in Vista compatibility mode and check.
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows