f keys and shortcut keys stopped working tried all the bugs found here and there of win7 + microsoft 4000 ergonomic keyboard

Similar Questions

• reports on the problems and solutions has stopped working message all the time

  I can't access the control panel reports of problems and solutions and constantly get one - problem reports and solutions has stopped working, message on the screen.

  How can I disable or fix this problem.

  Hi NickMeyer,

  1. have you made a recent software or hardware changes to the system?

  You can check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• F6 on Microsoft 4000 ergonomic keyboard key doesn't seem to work on Vista but running Linux

  Hello

  I have a weird problem where key F6 on my keyboard does not work under Vista but works fine when I run ubuntu. I checked with MS material support and they confirmed that it is not a driver problem. Something wrong with Vista here.

  Any help will be useful.

  Thank you

  Hi rashdriver;

  1. were you able to use the keyboard in Windows Vista?

  2. you remember to make changes to the computer recently?

  You can try to check the keyboard on the screen and if the problem persists.
  Check out the link:
  Type without using the keyboard (on-screen keyboard)
  http://Windows.Microsoft.com/en-us/Windows-Vista/type-without-using-the-keyboard-on-screen-keyboard

  You can also visit the following links and try the suggested steps:

  Troubleshoot keyboard

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-keyboard-problems

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Some keys stop working after the update of the Sierra (only for a specific profile)

  After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

  The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

  Anyone know what that sometimes caused that and with the fix is?

  Hello ExcelsiorPath,

  After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.
  
  

  If the other keys do not work

  You may have accidentally set an option that changes your keyboard works.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

  • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

    To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

  macOS Sierra: If your keyboard does not work

  Thank you for using communities of Apple Support. Good day.

• Satellite A300 - some keys stopped working after downgrde from Vista to XP

  Hello

  Excuse me for my bad English. I have a problem with my Satellite A 300 PSAG4E-0450. Operating system went from Vista to XP. Easy keys, keys shortcut and illumination stopped working. All the drivers have been downloaded. I tried to find it in Control Panel-> Toshiba controls. I changed to bright power, but this isn't work. If I try to turn it off, I see a window with "choose order".

  What can be wrong?
  Thanks for your help.

  Hello!

  As far as I know, the lighting can be disabled and enabled in the BIOS.
  Check it!

  To shortcut keys, you should try to install the Toshiba controls and utilities hotkey.
  From Toshiba Web site: http://eu.computers.toshiba-europe.com

  I hope it's useful for you.

  Good bye

• Microsoft 4000 ergonomic, which are back and buttons just below the space bar for forward?

  Original title: tne on Microsoft 4000 ergonomic

  On the Microsoft 4000 ergonomic keyboard. What are the buttons back and next just below the bar of distinguished? I've never seen them do anything when I press them. And there is no link of programming the software set up for them.

  I just had the Microsoft 4000 ergonomic keyboard of THIS support in my office, and the back and the front keys work exactly as 'return' and arrows 'before' in my browser (Firefox).  I didn't do anything - program may be the game of the previous user upwards - but for me they work for the web back and forth, not navigation problem.

• on my laptop of his fathers ' key stopped working and now he cannot get on his laptop because the password has a S in there.

  original title: laptop trouble

  Good so recently on my laptop of his fathers has ' key stopped working and now he cannot get on his laptop because the password has a S in there. He tried to clean the key to bored all possible ways, and nothing works. He wondered if he had a Ctrl function that would allow him to put a s with the key or bypass the password lock. Also, it has no access to a USB keybored.

  If the account in question was not the built-in account named Administrator, and then log on to that account and go to control panel > users to change the password.

  The password for the administrator built-in account is blank (no password).

  To connect to the built-in Administrator account:

  Reboot safe mode: press F8 immediately after power on.  The administrator account is displayed on the homescreen mode without failure.

• Touchpad and F9 keys stopped working

  The touchpad has stopped working and the F9 key does work more for the touchpad.  How can I fix it?  It's a Toshiba Satellite laptop.  Other F keys still work.  There used to be a drop-down list on the desktop for the F keys, but it doesn't work either.  In the properties of the touchpad driver, disable is grayed out.

  Hello

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums.

  Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums - good source of info from others who have the same system or similar
  http://laptopforums.Toshiba.com/

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  You can download but not install the drivers before the the below if you wish.

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  REBOOT - it will refresh the driver for the TouchPad and USB stack. This does not prevent the
  Touchpad work.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
  and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hello

  Looks like a hardware failure.

  Try to reinstall the operating system:

  It comes to the use of the Asus restore procedure.

  http://www.ASUS.com/support/FAQ/1006133/

  See you soon.

• Access keys stopped working after update Win XP on Portege M200 and M400

  After having invited to do, I recently upgraded to Windows XP two my Portege m400 and m200 notebooks.
  Since then, I've noticed as hotkeys that i.e. Fn + F1 - F12 has stopped working.
  Outside the windows updates, I only use and change a lot on the m200 so I am sure this has to do with the Xp updates.

  Can someone help me restore the m200 and m400 hotkeys?

  Hello

  Try reinstalling the common module for Win XP edition filed.

  The common module for Poretege you can find on the European driver Toshiba page:
  Laptop-> Portege-> Portege M Series-> Portege M400

  The common module for Portege lies in
  * ARCHIVE *-> Portege-> Portege M series-> Portege M200

  Welcome them

• Satellite L500-13W - FN key stop working

  Hello everyone

  I have a problem, all of a sudden, without doing anything, my * FN keys stop working *. The adjustment of the brightness first always worked without appearing in the bar at the top of the screen, but when I restart the computer even no work, nothing in relation to the FN key works.

  My biggest problem is that my computer is a Toshiba Satellite L500-13W and * I can only activate wireless by pressing FN + F8 *. I can't stay with this issue much more. I already looked in this forum and other sites, but none of the solutions have solved my problem.
  I hope you can help me.

  Thanks in advance.

  (Sorry for my bad English) :|

  Oh I forgot to say, I use Windows Vista 32 bit

  Hello

  > I already looked in this forum and other sites, but none of the solutions have solved my problem.
  Does that mean exactly? What have you already tried exactly?
  You should post this very important information what you exactly did.

  Furthermore, I can't find any more information about your operating system. You are using Vista 32-bit, but is this preinstalled Toshiba or have you installed yourself?

  Good bye

• the Z key stopped working

  I had a v.2.0 keyboard Microsoft Wireless Laser 6000 for many years. It is connected to my laptop Lenovo via cables to the dock go Lan.

  A month ago, the z key stopped working. Well on the cell. I tried all sorts of troubleshooting. New driver. Reconnect the docking, cleaning and more.

  Still no go.

  Help. Thank you.

  You can only replace the keyboard. It is a material, after a few years, that is expected to fail, it's not your fault nor the fault of the manufacturer. It is located.

• When Intellitype Pro 7 uninstalling Logitech G11 multimedia keys stop working.

  I just upgraded my MS Comfort Curve 2000 to a Logitech G11 keyboard. Multimedia keys work correctly with Intellitype Pro 7 is installed, but I need this more. Have installed the Logitech software but when I remove ITP 7 on my G11 multimedia keys stop working. I tried several times and they won't work with ITP 7 deleted.

  What is ITP 7 to my XP Pro SP3 system to stop the multimedia keys when ITP is removed.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• both Ctrl keys stop working on R61i

  Hi, this is my first post. I tried the search function, but couldn't find the answer.

  I've owned several ThinkPads since the R30 and they have always been reliable. (My wife and I still have this R30 more 3 R40s and 2 R61s)

  R61i my wife developed a problem (under XP Pro). The Ctrl keys no longer work.

  I can copy and paste by using the menu, right click menu, or on the keypad of the screen.

  If I go to Notepad, press Ctrl + c, the 'c' character is typed.

  I found Windows "Narrator" who will speak the names of the keys when you press. It is quiet when you press a Ctrl key.

  I think it is strange that both Ctrl keys stop working at the same time that would make me assume that it's not the physical keys themselves.

  Any ideas?

  Thank you

  Notes

  
  

• Why my Fn key stopped working?

  I have a laptop Asus G73JH and the Fn key stopped working.  I tried reinstalling the drivers, update drivers, etc, and nothing has worked.  Any suggestions?

  In the meantime, find a work around. ASUS maybe provided a utility to exchange the keys F1 - F12 to be multimedia to be again the function keys control keys & back if necessary]. This would reduce your need for the Fn key.

  In a Valley, this utility is in Control Panel as a dialog Windows Mobility Center updated the. Try looking first in case they all are the same way.