Touchpad and F9 keys stopped working

Similar Questions

• f keys and shortcut keys stopped working tried all the bugs found here and there of win7 + microsoft 4000 ergonomic keyboard

  have tried all the bugs found here and there, that is to say updated drivers uninstalling and reinstalling etc.   Win7 + microsoft 4000 ergonomic keyboard I think it's maybe a defective keyboard

  Hi Cynthia,.

  Thanks for choosing Microsoft Community Forums.

  Based on the description of the problem, it seems that you are having problems with the Fn keys and access keys stopped working.

  (1) have tried to check with another keyboard?

  (2) have tried to connect the keyboard to the other computer?

  (3) have you made changes on the computer before this problem?

  I suggest to follow the steps on the screen, keyboard and check.

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-CA/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Satellite P100 PSPA3A - Touchpad and function keys not working not

  Hello
  I'm new to the forum so please excuse my lack of computer skills.

  Where my problems began, is that I deleted the driver of my computer keyboard.
  I reinstalled and now works with the exception of the function keys.

  I tried to install Hotkeys out of the Toshiba web site without success. It will not be loaded on the computer for me.
  I also reinstalled "utilities" and in doing so the touch pad mouse has stopped working.

  Is someone able to offer, for me, what should I do to fix this?

  Thank you very much in advance for your help.
  Sam

  I never heard of a keyboard driver deleting, but if some of your buttons work so I think the software is very good. It may be a loose keyboard connector is loose, which is located under your keyboard around the buttons 'Fred '.

  I return the phone to the place of purchase and get them to fix it. Less pain for you and an easy solution. Keep it simple, everyone!

  Good luck.

• left side ctrl key, ESC, f1 and f3 keys stop working all of a sudden.

  Hello

  I have a problem, I have laptop Sony vaio SVE15114FXS and since before yesterday my laptop on the left side ctrl keys key, ESC, f1 and f3 stop working all of a sudden, I tried a lot of things to understand tht y the problem give but without no result found. I restored my laptop and reinstall the keyboard drivers too for this problem, but still its giving me same problem, please help me and make me this problem.

  shereenkhanzada,

  If you mean restore as in a factory restore and the keys are still does not the device will require repairs.  If it is a model of the United States please call for Sony Support @ 800-222-7669 so they can trouble shoot and set up for service if required...

• Touchpad and some keys not working do not due to static electric shock

  This is an unusual problem - maybe someone can shed some light on this, and (especially) thoughts towards fixing the problem would be GREATLY appreciated.

  Yesterday, I got my ACER Aspire 1830 t series netbook (Windows 7, 32-bit) and a little shock to receive static electricity - nothing major, exactly as happens when you touch anything with metal (especially in winter?), right. However, it has caused a few problems:

  1. first of all it has caused my netbook to a hard cock down.

  2. once I rebooted the system, the touchpad did not work.

  To restore functionality to the touchpad, I tried the following until now:

  • FN + F7 (toggle to turn on/off the touchpad) - IS NOT WORKING.
  • Reboot - IT DID NOT WORK.
  • Use a wireless mouse - Fortunately, IT works.

  3. I was about to try to reinstall the driver for the touchpad when I noticed that some other normal keys have lost a few perfect. For example, I can no longer hold the BACKSPACE key or the arrow keys to a continuous function - they only move a space at a time, so I have to stay here by tapping it again and again.

  So far, I are not noticed a problem of corrupted files or programs, so maybe that's more a hardware problem than a problem of driver/software.  Is it possible for static electricity incinerate a wire or something?

  Any help would be greatly appreciated. This baby is only a few months out of warranty...

  Thank you very much!

  Try to unplug the power, remove the power battery button and press on for 20-30 seconds, it stays for a while and try to turn it back on, I'm not sure if it will solve but worth it.

• Touchpad and clicks have stopped working on my laptop

  Original title: can I FIX?

  Well, my friend, I think that has a press that has locked his left click on its mobile Gateway (primary)... also as of today the right click on & touchpad no longer responds to commands?  Last night @ least right click on, then press the key worked a bit, but today NOTHING. I did research on my laptop and found tips and ways to try and solve this problem.  Unfortunately... I need to use the left or right click and the touchpad? ... what a bum - sea... Laughing out loud!    So I thought to restore Sysem (startup hoping to repair would help) HA! ... need to left click to activate... OMG!  My question is... are there any key that can be used to do what the right, touch pad & clicks left to do? My friend's son Granny and she's really down because she said she hit some buttons @ top?  Right now the computer waits for me to "click on restore" Startup Repair, but I can't... R & L clicks and touchpad don't answer cammands... Thnx in advance 4 help

  Thnx a lot to the person who helped me with the question WinDefendr & SecEssentls (smile).

  Hello

  Startup Repair and system restore are two different things.

  System Restore is used to put the settings of your machine to a previous point in time before that happen a certain problem. I hope it would work.

  Startup Repair is used if your machine does not fully start in Windows.

  Make sure that you are not looking to restore to factory settings. Who says back to nine and erases all data from the hard drive.

  You can try to connect a USB mouse to use to try of difficulty and derivation for now the Touchpad problem.

  See you soon.

  PS You can also try hard restart it and see if it changes Mode without failure.

  You can work there to do a system restore while in there.

  "How to start mode without failure.

  http://bertk.MVPs.org/html/safemodevista.html

  How to do a system restore:

  http://bertk.MVPs.org/html/restoresysv.html

• H Envy 17: HP Envy 17: F9, F10 and F11 keys stop working

  Hit f9 - f11 keys on my keyboard control my music.

  • F9 = previous track
  • F10 = play/pause
  • F11 = next track

  It worked well upward until a few days ago. Now, they don't work at all. I also tried combining them with the fn key, but do not work yet.

  I'd really like to help, try to understand it. I use these keys frequently, and it's starting to really annoy me.

  I don't know what information is necessary, but here's what I found:

  Product name: HP ENVY 17 Notebook PC
  Product number: G0U21AV
  BIOS: F.34-12/19/2014
  Keyboard review: 77.35
  Total memory: 12.00 GB
  Name of the processor: Intel Core i7-4710HQ CPU @ 2.50 GHz

  I tried your first proposal and did not get anywhere. However, I played around a little more with different combinations of keys, and I found a combination that works! For anyone else having this same problem, try pressing the following key combinations:

  FN + alt + f9

  FN + alt + f10

  FN + alt + f11

  Thanks for your help!

• on my laptop of his fathers ' key stopped working and now he cannot get on his laptop because the password has a S in there.

  original title: laptop trouble

  Good so recently on my laptop of his fathers has ' key stopped working and now he cannot get on his laptop because the password has a S in there. He tried to clean the key to bored all possible ways, and nothing works. He wondered if he had a Ctrl function that would allow him to put a s with the key or bypass the password lock. Also, it has no access to a USB keybored.

  If the account in question was not the built-in account named Administrator, and then log on to that account and go to control panel > users to change the password.

  The password for the administrator built-in account is blank (no password).

  To connect to the built-in Administrator account:

  Reboot safe mode: press F8 immediately after power on.  The administrator account is displayed on the homescreen mode without failure.

• Volume and mute keyboard keys stop working

  P7 - 1298c updated to Windows 8 Pro, everything worked but now the volume keys and mute have stop working. I know that there are related software, because if I boot a backup drive, they work again. The most obvious thing I did lately, it's remove the feature optional windows Hyper-V. Is there an obvious way to reactivate the buttons?

  Another recent change, I've had, I think that Adobe Flash player has updated.

  It seems to have solved the problem with the help of an old thread in the http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Volume-control-keys-on-keyboard-not-working/td-p/773049 area Notebook

  I uninstalled the device IDT under sound, video and game controllers in the Device Manager with option enabled, rebooted and reinstalled driver remove the last available IDT device shown to my system model and win 8 64-bit. Oddly enough, I received a message that the update failed. But the sound and the buttons seem to work fine now.

• Keyboard and touch pad stopped working on Satellite L750

  My laptop L750 keyboard and touch pad stopped working on start up. I now use a USB mouse and on-screen keyboard to do anything either. I have tried several things to fix, but nothing seems to work.

  I've updated keyboard drivers, tried related work key, updated and run antivirus software and restored to a point in time before the show. Still no luck.

  Any ideas?
  Thank you

  Keyboard drivers?
  Can you please send the link to download? It is unclear to me that the own keyboard driver.

  In any case, can you use keyboard and touchpad if you start the operating system in safe mode?
  Are you using the original pre-installed OS that you got with your laptop?

• Some keys stop working after the update of the Sierra (only for a specific profile)

  After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

  The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

  Anyone know what that sometimes caused that and with the fix is?

  Hello ExcelsiorPath,

  After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.
  
  

  If the other keys do not work

  You may have accidentally set an option that changes your keyboard works.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

  • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

    To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

  macOS Sierra: If your keyboard does not work

  Thank you for using communities of Apple Support. Good day.

• How to get help with Add ons and extensions that stop working

  I have saved passwords and it has stopped working. It's so hard to get help with Moxilla

  rosemarybales said

  I still don't know why the extension button passwords saved with the key icon has stopped working.

  This button displays the saved passwords in Firefox's built-in password manager, is no separate passwords that record you in Dashlane. Can you save passwords in both places? (Well, I guess you do.)

  I have a guess on why it has stopped working. Firefox 40 has some changes to how extensions can work with the user interface, so quite a few extensions that have been more than one year must be updated for Firefox 40. It has been updated on January 10, 2012.

  Anyway, the way of 'long' to display the passwords saved in Firefox is through the Options page, the Security Panel, the saved passwords button.

• Someone else has volume function keys stop working?  If so, I know a fix?

  Sometimes, my function keys stop working.  The small volume box appears and the volume is shown to change but there is no real effect on the volume.  Anyone know a fix for this other than to restart the computer?

  you have speakers connected, secure, powered?

  helmet?

   > System Preferences > Sound

  What is your output on?

• Satellite C650D - keys stopped working

  I have a Satellite C650D;
  One day some of the keys stopped working, and now, almost all of them do not work?

  Hello

  Do you mean that several keys on the keyboard (any button) don t work?
  HM, sounds like keyboard problem.
  I think the keyboard needs to be replaced.

  If the warranty is valid, contact the ASP and get it fixed under warranty conditions

• Satellite L500-13W - FN key stop working

  Hello everyone

  I have a problem, all of a sudden, without doing anything, my * FN keys stop working *. The adjustment of the brightness first always worked without appearing in the bar at the top of the screen, but when I restart the computer even no work, nothing in relation to the FN key works.

  My biggest problem is that my computer is a Toshiba Satellite L500-13W and * I can only activate wireless by pressing FN + F8 *. I can't stay with this issue much more. I already looked in this forum and other sites, but none of the solutions have solved my problem.
  I hope you can help me.

  Thanks in advance.

  (Sorry for my bad English) :|

  Oh I forgot to say, I use Windows Vista 32 bit

  Hello

  > I already looked in this forum and other sites, but none of the solutions have solved my problem.
  Does that mean exactly? What have you already tried exactly?
  You should post this very important information what you exactly did.

  Furthermore, I can't find any more information about your operating system. You are using Vista 32-bit, but is this preinstalled Toshiba or have you installed yourself?

  Good bye