F2400 All-in-one Printer Setup

Similar Questions

• B1110 HP all in one printer sc: PROBLEMS SCANNING ON MY HP B1110 ALL in ONE PRINTER AS SETUP NEW PC WINDOWS 8.1

  Since the installation of my new pc windows 8 my hp b110 all-in-one printer not scan and when the bottom lines of the text of my printing pages are cut and do not print

  Hi year54,

  Welcome to the HP Forums.

  I see that you are having some printing problems.

  I wasn't able to find the model of the printer you are using.  If I can better help you, please respond with your printer model number:
  How can I find my model number?

  Thanks for your time.

  See you soon,.

• HP All in one Printer 4515: HP All in one printer 4515 Setup error

  I bought a HP All in one Printer 4515. I started installation, in order to implement, it worked fine, I scanned the page to adjust the calibration of the toner. During this time blue light which is used to the wi - fi connection always blinking since the beginning of the installation of the printer.  I do know that if the flashing is right, I found it strange...

  I downloaded the www.hp.com/ePrint/DJ4510 Installer and started installing.

  When I started to configure the wi - fi connection, I failed. Installation software wrote me to retry the configuration.

  I did and the printer display began flashing, he wrote to me that there is a mistake of the printer, and I have to stop him.

  So I stopped, but the blue screen appeared and he wrote: BV815424C. Because then I can not start even the printer, because when I press the power button and start the printer on the printer screen, the same message appears that I need to stop it and it is possible that this situation repeats itself all the time and the blue screen appears with BV815424C.

  This situation occurs for the second time. I have new bougtht printer 2 weeks ago and the same situation has happened, it's HP second All in one 4515 printer that I have instead of the first damaged...

  It is a problem of the printer and I need to return for the second time or is it possible to fix it?

  Hey @dijanas,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have some problems with an error code on your Deskjet Ink Advantage 4515 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. It is this document explains How to resolve error messages on your printer.

  If after following the instructions above, you are still unable to initialize the printer and the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.

  I hope this helps with the error message and I hope you have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• All-in-one printer, HP OfficeJet 6210xi crippled

  I installed my portable printer all-in-one OfficeJet 6210xi more than 4 years ago. Everything worked well. About two years ago, I replaced my PC with WinXP Pro's home computer. Everything worked well. A few months later, I bought my wife a printer wireless HP DeskJet 6980 for his iMac. The installation was easier to run from my XP PC, so I have installed the software on the iMac and the XP PC, was the game of the XP PC then both the iMac and PC XP have been able to print to the HP 6980 wireless and the XP PC has been able to use all functions of the 6210xi all-in-one printer.

  Whenever there is a dialog box informing me of a software update for each printer on the XP PC or iMac, I accepted the update. Everything worked fine until a year ago, then the XP PC locked up in the middle of the scan of an image from the 6210. He had no other choice but to keep the power switch of the XP PC until the shutdown of the PC. "Windows Task Manager" can complete the task.

  When I rebooted, I got a message that Windows did not find file HPSoftwareUpdate.msi. I used Windows 'Search' to find the file, but the message rejected this file. For weeks, I have ' X'ed ' on the box dialog at every reboot and everything still worked fine, but one day, when I was offered a software update and I could not receive it. The company said that it lacked HPSoftwareUpdate.msi.

  I googled the problem and read that I have to uninstall and reinstall the HP software for the 6210. No help. I lived with the problem because everything worked fine, except that I could print is no longer to the XP PC HP 6980. The iMac has worked well with the 6980.

  Then the problems started. At the start, after that my desktop I get a box titled "Windows Installer", and then a second box: 'Please wait while Windows tries to configure library', then a dialog box "the feature you are trying to use is on a CD or another removable disk that is not available. Insert the disc of the photo gallery and click on OK. There is a drop down menu to 'Source '. If I try to 'Browse' the first thing that appears is the PhotoGallery.msi file in the folder C:\Windows\Hewlett-Packard\Setup Files Software Update\. I tried to click on the PhotoGallery.msi file, and I get a message that "the Update\PhotoGallery.msi C:\Windows\Hewlett-Packard\Setup of HP software is not a valid package for photo gallery. Try to find the PhotoGallery.msi installation package in a folder from which you can install Photo library". I tried to use Windows Search to find all other instances of PhotoGallery.msi, but I get the same message when I click on them. I tried to use the CD supplied with the printer. No help.

  I get an "error 1706. No source is valid for the product photo library is not found. Windows Installer error message cannot continue"when I exit the installation/configuration process. I have to cancel the process about 3 times before he left.

  My printer works fine as a printer and I can copy and FAX from the console of the printer, but whenever I get one sheet to FAX or copy, I get a warning sound and a message that the there is a problem.

  If I open "Image area" to try to scan a photo or a document, my albums are all absent and when I complete the scan, I get the same series of messages as when I reboot. The biggest difference is that the ongoing process of trying to repeat no matter how many times I Cancel. I have to use "Task Manager" to the "end task".

  I uninstalled the 6210 software and reinstalled several times. I used the CD that came with the printer and also the last driver downloaded from the HP Web site package. I uninstalled the software HP 6980. Nothing seems to make a difference.

  I think I have one or more of the following problems:

  #1. There is the uninstall process does not remove the files
  #2. There are registry entries that I need to remove
  #3. There are files for the HP 6980 in folders where there should be files HP 6210

  Does anyone know how to get all relevant files, registry entries and HP off my PC, apart from reinstalling Windows? I need to reinstall the software as if it was a first time install.

  FreddieVee

  First I ran the file gr_uninst.exe http://h10025.www1.hp.com/ 4 times. Then I ran msicuu2.exe the "Windows Installer CleanUp Utility" (I have the link that you provided = http://support.microsoft.com/default.aspx?scid=kb;en-us;290301) and finally I used the EasyCleaner Registry Cleaner from ToniArts v2.0.
  
  I decided to use the three programs rather one and then re-install and hoping that all this work.
  
  After re-installing, using the last package of driver for my printer HP and the combination of the OS, everything works like new.
  
  Thank you for your advice,

  FreddieVee

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• E-all-in-one printer WiFi problem 3520

  Product name: 3520 e-all-in-one printer

  WIFI problem ofline whenever we want go print

  I bought a HP 3520 printer e-all-in-one, cause it can print ussing WIFI. But I am very satisfied! Whenever I want to print, the printer go to ofline and is not able to perform the task of printing sent from my laptop. On my laptop, I have windows 8 and I installed the right driver. Yet he expect regeister once more my printer and install the driver all over again before finally seeks to print. For me with the amount that I have to print this is does not work!

  I'm regretting that a lot i let the salesperson talk to me by buying a Hewlett packerd. Because I have this printer now a little more than six months and already want to trow I have a very high roof. Previously I also had bad experience with a Hewlett Packerd printer!

  Hi idebont,

  If you haven't already done so, please run the PSDR.  Find and fix common printer problems using the tools of diagnosis HP for Windows?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  This ensures that the printer is full on and can help this situation.

  We need to know if the printer or router is to lose the connection.

  You have a flashing wireless to the printer when you try to print from the computer or is the light solid?
  If it is flashing then the printer tries to find the network.
  If the light is solid, it is on the network. Try to print from a mobile device, if they are configured at the printer.

  Print a configuration page to see if the printer has a valid IP address.

  Printing a Network Setup Page.

  Type the IP address in the address bar of your web browser. (Internet Explorer)

  You can access the Web server integrated for the printer when the printer is in offline mode on the computer? (EWS)

  If you have a valid IP address and you can access the Web server integrated for the printer, then perhaps changed the IP address assigned to the printer to the router. So the origin of the computer does not find the printer. (setting up a static IP will solve this problem)

  Check the port showing on the computer to verify that it matches the IP address of the printer.

  Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

  Click on configure port to display the IP address.

  If the IP address does not match, and then create a new port with the new IP address.

  Close the port to configure.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. -Fax Confirmation Page

  I have the HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. It works very well, but how to make a page of confirmation by fax, with the impression of a miniature of the 1st page of the document I sent?  I checked the configuration information, but apparently not have indications confirm that I sent the fax through the confirmation page with a small impression.

  Hi dtaylor569,

  Follow the instructions below.

  To activate the fax confirmation
  1. press the arrow to the right and select Setup.
  2. press on the configuration of the fax, click Fax reports.
  3. press on the Confirmation Fax.
  4. tap to select one of the following options.

  • Discount - does not print a fax confirmation report when you send and receive faxes successfully. It is the default setting.
  • (Fax Send): Prints a report of fax confirmation for each fax you send.
  • On (fax) - prints a report fax confirmation for each fax that you receive.
  • On (Send and Receive) - prints a report fax confirmation for each fax that you send and receive.

  Prints a report of fax confirmation for each fax that you send and receive.
  To include an image of the fax on the report
  1. press Setup.
  2. press on the fax, click Fax of Confirmation reports.
  3. tap on (fax) or we (send and receive).
  4. press on the Fax Confirmation with the image.

• HP ENVY 5530 e-all-in-one: printer is not to connect to the Internet wireless

  Hello

  English is my second laungage. hope you understand...

  I can print with printer through windows and Mac PC cable. but, I can not connect between rutour and the wireless printer.

  I used the Setup Wizard and found the SSID name. I typed PW. but "Not connected" is displayed.

  I print the Configuration Page from HP network.

  Live wireless

  Status on

  What else can be done using wireless printer.

  Kind regards

  MI-Ko

  Hello

  If you try to connect your printer to the router, you should make sure that wireless Direct is trurned to offshore. Direct wireless is a feature that allows you to connect a device directly to your printer without router (the printer generates its own wifi)

  Please turn off direct wireless (it's often a button on the front panel) and try to connect again.

  I have included a link below for you rprinter support page that contains the user guides that should help also.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882

• Cannot install the all-in-one printer

  Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

  System Windows 8.1

  I uninstalled printer because had message printer disconneted.

  Check the devices & printers in the control panel

  Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

  I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

  According to HP print and scan the doctor 4.3

  The following products are visible from your computer

  HPDD4BE7 (HP office jet 4500 G510g-m)

  connection: network

  software requirement: installed

  I tried to print but prints blank pages

  I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

  I have good HP office jet 4500 G510g-m printer installed?

   

  Troubleshooting report

  Problem with the yellow triangle detected printer with an exclamation mark inside

  There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

   

  Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

  First step: rename the .dat files in the Windows folder

  Search box, type % windir %

  No adjustment results found for your search %windir%\System32

  The first step is not a solution

  Second step: download and install the software from the HP site

  Not a solution: when click on get installation message: the system cannot find the specified file.

  You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

  question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

  I have no problem, download and install any software but

  HPDD4BE7 (HP Officejet 4500 G510g-m)

  I did the test HP officejet 4500

  Green connection box

  device status green checkmark

  I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

   

   

  Ok

  Please try the following steps:

  1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
  2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
  3. Type %windir% , and then click OK.
  4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
  7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
  8. Launch the dialog box run by following steps 2, type % temp % and click OK.
  9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

  Please follow these steps in the exact order, is there a difference during the installation of the software?

• Software all-in-one printer HP LaserJet Pro CM1415nfw does not load

  Software solution complete all-in-one printer HP LaserJet Pro CM1415nfw (CD or download) does not correctly load on my desktop running Windows 7 Professional 64 Bit. After I bypass payment the contract of the software, loading software hangs on the 70% mark and I get the following message:

  "Error message: a problem occurred during the preparation install the software." If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. MSIExec command: /i "C\CM1410_MFP_Series Solution\Setup\Core\SIPM_64 based |" HpTcpMon64.msi"/qn REBOOT = ReallySuppress Path: return code: 1603"

  The CD software did load on my laptop which runs on Windows XP, SP - 3.3 and the printer works as expected.

  Uninstall other software printer and disconnect them. Then try to load the new software first.

• How do you set the time and date for the fax on HP Office Jet 4622 all-in-one printer?

  I installed the all-in-one printer HP Office Jet 4622 and everything works like.  However on the test page for the date and fax are showing Jan-00-00 00:00 AM.  I don't know how to change the date and time.  Help, please.  Thank you.

  Use the Setup (wrench) button on the front of the printer to look through the settings menu to set the date and time of the printer.

• HP Photosmart all in one printer C7280 Windows Vista 32 bit.

  My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.

  I unplugged and it always goes to the same thing when I turn it back on. How can I fix it

  This problem?

  Thank you

  ducksterman.

  Hi again,

  If it doesn't appear on your printer and not on your PC, right?  My bad... I'm in the driver settings.  Try holding down the symbol # and 3 at the same time on your printer.  This should reset the printer.  If this does not work then press the symbol # and 6 at the same time.

  Or

  To restore the default settings

  1.

  Press Setup.

  2.

  Press to select Tools, and then press OK.

  3.

  Press to select Restore Factory Defaults, then press OK.

  The default settings are restored.

  Let me know if that helps...

• HP wireless all in one printer C410 can get a connection

  I have a HP C410 e-All-In-One printer/fax/copier that is wireless. It was working fine with my computer until someone changed my internet security settings, and now I can't connect. How can I re - adjust the internet printer or the computer setting so that it is compatible again? My printer just wirelss button continues to Flash, as it cannot connect. When I go in the menu on the printer Wireless Setup, I can say that the printer sees my internet, it cannot simply connect. Help, please!

  The easiest way is to uninstall, and then reinstall the printer. If this does not work, then you should ask experts network for advice: social.answers.microsoft.com/Forums/en-US/w7network /son

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/