HP wireless all in one printer C410 can get a connection

Similar Questions

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

  Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

  Hello dhe8011,

  Welcome to the HP Forums!

  I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

  Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

  Let me know if this document solved your problem or not.

  Impatience on your part.

• Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

  I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

  What happens and how can I solve this problem?

  Hi TM1997,

  Thanks for the reply!

  Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

  Have a great weekend!

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• All-in-one printer C410

  How do I correct the time on my of C410 all-in-One printer

  Go to your SETTINGS on your printer.
  1. choose Preferences
  2. date and TIME

• Black cartridge does not print 6500 wireless all-in-one printer

  He can't get a black cartridge to print even after cleaning the print heads on my of 6500 all-in-one wireless printer.  I tried cleaning the heads of print and sensors twice no longer useful, but can print color.

  jweatherly, unfortunately, it seems that your printhead may be dried or damaged. I would recommend that you replace it if a local retailer or through HP directly.

  However, the print heads can be an expensive part of the printer to replace. On this thread (http://h30434.www3.hp.com/t5/Other-Printing-Questions/HP-6500-Office-jet-E709a-Black-printer-cartridge-HP-920-not/m-p/447545#M28623) Bob describes some steps to clean the printhead in a more direct way. It might be useful to follow the steps, he did and see if it improves your print quality, since he worked for others.

  Let me know if it helps!

• HP Officejet 6500 Wireless all-in-One Printer - E709n does not print

  My HP Officejet 6500 Wireless only all-in-One does not print from my main computer. I can scan from this computer and print them from others. I uninstalled and reinstalled the software and drivers, restarted the queue, run the scan doctor and get error error unknown/deviece.  I have disabled the firewall unplugged abd and repluged the power to the printer.

  Any thoughts?

  I have messed with my firewall and had it work. Still not sure what I did but it resets something. Thanks for the help.

• Cannot connect my new HP4620 wireless all-in-one printer on my local network

  The printer is aHP 4620 all-in-one wireless printer.  The network is a Linksys Wireless - G Broadband Router connect an old HP Pavilion zv6000. portable 32-bit laptop running Windows XP and my brand new Pavilion dv6-7010us 64-bit running Windows 7.

  First of all, I ran the installation disc for the printer on the Pavilion zv6000.  Wireless Setup went well without any problem the printer connected to the router and to enable printing of thezv6000...  Then, I loaded the printer installation disc in the new Pavilion dv6-7010 and started the installation.  Everything went well until what the installer told me to connect the USB cable between the printer and the computer, and shortly there after that I got an error message an unknown error and that the installation program has been stopped.

  Since then I ran, I think, all the trouble shooting programs recommended with different results, all unsatisfactory.  Right now the test of the last wireless network said that the wireless is on, the wireless works. The connected test did not run.  the major flaw is that the SSID was not found, but there were 5 other networks detected.   The current configuration is: SSID is not set, the Mac address is OK, No IP address is defined, mode of Communication is Infrastructure and Authentication Type is open system.

  Printer is no longer printing of thezv6000.  However the zv6000 both my IPAD become jobs printed via

  HP eprint.  It does not appear that there is something wrong with the printer mainly a configuration problem.   Any suggestion would be

  greatly appreciated.

  Hi Beelzebub2,

  Follow the steps outlined in the document below and let me know what you find?

  "Cannot find the printer" error message on the computer during a wireless network Installation

• HP Officejet 6500 - E709n: power adapter for the HP Officejet 6500 - E709n wireless all-in-one printer

  I need a new power adapter for my HP Office 6500 - E709n.  Does it matter if I buy an adapter for a model E709a?  Will it work on the E709n?  The power adapter E709a looks identical in the photos.  Thank you.

  Hello

  In fact, they use the same adapter as shown:

  http://support.HP.com/au-en/document/c01636617

  Note: Make sure the 2 sections

  Models all in one HP Officejet 6500

  and

  Power specifications

  Kind regards.

• B110A Photosmart wireless all-in-one printer

  Printer continues to disconnect from the wireless connection, tried to put a static IP address, but not luck. Other available solutions? Can I change the parameters of confirmation for the printer?

  Any help would be greatly appreciated.

  Thank you very much

  Darren

  To restore the default settings.
  1. go into the Setup menu
  2 network
  3. restore default settings

  If you restore the default settings, it will take the printer to the network. You will not have an IP address until you reconnect the printer to the router again. If you want to print, and the computer has different IP address, you will need to UPDATE on the computer IP ADDRESS.

  1. click on Start Menu
  2. all programs
  3 file HP
  4. choose the Photosmart printer
  5. update the IP address

• 8610 all-in-one printer: I can't download the firmware update to remove the dynamic security

  "For not original hp ink users an update of the firmware option to remove the dynamic security is now available for select Officejet, Officejet Pro printers Officejet ProX."

  I have bee patiently for the "fix".   Following the posted signs: http://support.hp.com/us-en/document/c05308850?openCLC=true

  Step 2) "click your HP printer model in the table below and run the file to update the firmware downloaded from your Internet browser."

  Seems to have no option to run the download of my Internet browser.

  I use Safari (and that's all I intend to help).  When I click on the download, I get an error message that says: there is no application to open the file. I tried to right click 'open with' - any of these options are internet browsers.

  Can you offer any help?

  Hello

  Option updte to remove the functionality of dynamic security listed in the document is only intended for a Windows PC.

  Download and install the update by using the following link for Mac OS:

  http://FTP.HP.com/pub/softlib/software13/printers/OJP8610_R1640B.dmg

  Kind regards

  Shlomi

• HP Officejet 4500 - G510n wireless all-in-one printer

  I pushed a few wrong buttons and have spent hours trying to get things back where they were.  I finally installed new drivers, but now a facsimile screen whenever I want to print!  I rarely use the fax and I would like that the screen go away.  How can I solve this problem?

  In addition, even if I installed new drivers, my printer says my device app error message install is incomplete and I go to the windows store.  I received my new drivers directly from HP... don't should not go far intant?

  Also, printing was erratic.  The last time that I tried I had a feeling it was slow, but I always had to deal with the annoying fax screen.  Help, please!

  Thank you.

  Ericasaunt

  Hi @ericasaunt and welcome to the Forums of HP!

  I understand that you have problems printing and fax.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Also, you are connected via a USB cable or wireless?

  Please let me know what you find.  Thanks for posting on the HP Forums.

• 6500 wireless all-in - One Print: Info for eprint app the name of the host

  I am trying to print from my iPhone 6 and a time warner email account.
  The eprint application requests a host name and port.
  How can I find this info.
  Thank you very much

  Hello

  You can find SMTP for Time Warner in the link below:

  http://www.timewarnercable.com/en/support/FAQs/FAQs-Internet/e-mailacco/incoming-outgoing-server-addresses.html

  Be sure to put the right SMTP server, the 587 port with the information of the user and the password as described.

  I don't see any reference to verify the SSL / TLS option, so I guess it doesn't have to be verified... If you are unable to connect, try to check this option as well.

  Kind regards

  Shlomi

• HP Officejet 6500 Wireless all-in - One Printer - E709n - locked up

  I searched the Forum but could not find a solution to my problem.

  My printer is locked and does not go in mode 'sleep'.  The power button does not work and is still on.  I'm unable to print, but however I am able to receive faxes.  The only way I can cut off is by unplugging the power cord, but when he doesn't go to the top it gives me a warning about disconnecting that way may damage the printer and to use the power button and it hangs again.

  Help, please.

  Thank you

  •´`•. (*•.¸(`•.¸ ¸.•´)¸.•*).•´`•»
  «•´¨*•.¸¸. ADRIENNE. ¸¸. • * ¨• »
  «•´`•. (¸.•´(¸.•* *•.¸)`•.¸).•´`•»

  Reset the printer by holding the # and 6 keys while turning the power on.

  It sounds dead for me, but it may work.  If it isn't, try # and 9 keys.