face recognition dell windows 8, worthless?

Similar Questions

• How do I enable face recognition in windows 8?

  I want to activate the face recognition on my n 8 windows enterprice, but I can't understand how do?

  Hey Anshul,

  As you have installed Windows 8 Enterprise and Windows 8 Enterprise issues are supported in the TechNet Forums, you can display this question in 8 Windows IT pro TechNet Forums: http://social.technet.microsoft.com/Forums/en-us/category/w8itpro

  Thank you.

• How to install on windows face recognition software 8

  I downloaded the facial recognition for HP protect tools on the site of hp, but while that install shows a command prompt he needs HP protect Tools Security Manager, so I downloaded as well (HP protect Tools Security Manager v.8.0.1.1328) but while install showed an error that "this software is not taken in load on your system" while on the Web site , he says that he supports both versions (32 - bit and 64 - bit) of windows 8.

  How to install laptop on my HP pavilion G6 face recognition software.

  Hi, Germain,.

  I thank very you much for coming back to us, with the updates.

  (1) don't you try to install the HP ProtectTools Security Manager software in all compatibility modes listed there?

  (2) you receive the same error message when you try to install in compatibility mode?

  If the Windows 7 compatibility mode doesn't work, then you can also try to use the Windows Vista/XP modes and check if that helps.

  If this does not help, then the problem could be due to the incompatibility of hardware. In this case, it would be best to contact the HP support to check if there are other similar software compatible with your hardware and Windows 8. You can get in touch with them from this link:

   http://WWW8.HP.com/us/en/contact-HP/contact.html

  Hope it will be useful.

• Example: Pavilion all-in-one: face recognition

  I have face recognition on my Pavillion, everything about him was ok until a few days ago, and now it does not work. He says turning to the camera, but nothing happens, so I have to identify you with a pin code

  Hi there @Aitch22,

  Welcome to the Forums of HP Support!  I understand you are looking for help to facial recognition in Windows 10, that no longer works. I'm happy to give you a helping hand with this.

  Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.  HP desktop PC - how can I find my model number, serial number or product?

  You are able to get the webcam on your system works somehow? Otherwise, please see: Computers HP - Webcam troubleshooting (Windows 10: 8).

  If the problem is the "security software", and if you are / have been using Windows Hello, you should try to contact Microsoft Product Support - support.microsoft.com, on this issue.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Cannot configure tool of face recognition

  Hello

  I'm from Romania and I have a Satellite L350, and I want to activate/install Toshiba face recognition but I have some problems.
  I bought this laptop from Germany with windows Vista Home Premium and don t understand this language.

  If someone can tell me what I need to do here is my messenger id pasulischidarius

  Hello

  Please don't get me wrong, but maybe you should install OS in the language that you understand.
  I know very well how it works with face recognition tool, but how to explain it when you use the German version.
  Do you understand English? Install the English version.

  By the way: check it please THIS link. I hope that you will understand how it works exactly.
  If you have any other questions please let me know.

  Good luck!

• Satellite A300-22F - face recognition cannot use the webcam on Vista 64

  Hello everyone,

  I have a big problem with the recognition of face and my Windows Vista operating system tool.

  Yesterday I installed Windows Vista 64 bit on my new laptop Sat. A300-22F as him preinstalled
  version of Windows was only 32 and I've got 4gig of RAM.

  Thus, all the drivers are installed and everything works. The driver for the webcam with the webcam program works, too.
  But when I run the facial recognition tool, an error that the webcam cannot be initialized or that
  the webcam is in use and cannot be used with the program now.

  So, no program is using the webcam. The webcam works with other tools. And in the settings of the tool face
  are the webcam, but always available, without work.

  Someone at - it an idea?

  I have the drivers of webcam directly from Toshiba.

  Thank you.

  Greetings.

  Hello!

  Start you have programs that use the camera as Skpye or MSN?
  Check it!

  You are using the latest version of the tools and drivers Toshiba? Search on the Toshiba site for an update.
  In addition, I would try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Face recognition is available for Portege R600?

  I was under the impression that this (a very competent machine!) R600 has face recognition - but I can't find this feature. Can I download from Toshiba?

  Thank you.

  Face recognition is also available on Portege R600.
  You can also find for download from Toshiba support page. There you can find the version 2.0.17.32 for Windows Vista.

• Satellite A300-1MT: where to download for Win XP Toshiba face recognition

  Hello. I bought Satellite A300-1MT, but installed Windows Vista does not suit me.
  I am install Win XP. I found all the drivers on the toshiba web site. But cannot find Toshiba face recognition.
  Please advice me something!

  Hello

  I fear that you will not find this tool for Win XP m.
  It seems that this function can be used only under Win Vista OS.
  If page European driver of Toshiba does not provide these software for Windows XP, then you won't be able to find it on other sites

  So I see only one solution; back to Vista if you prefer to use!

  Welcome them
  Jack

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• FACE RECOGNITION is not loaded at system startup

  I create my foto, add them to my windows account-made everything, who has been described in the standard manual for face recognition utility.
  But... When I turn on my laptop - no icon for the face recognition is shown... just system request password as usual. I have no idea about it, please advice sth.
  Thank you.

  Hello

  The password (keyboard input) is the backup solution when you can not log of face recognition using the webcam.

  If you use the recoganization to face for the first time that the practice is very useful.
  First of all, you will be asked to move your neck slightly to the left and to the right.
  Then, you will be asked to move your neck slightly up and down.
  After that, you can click once more to practice or click to start the capture an image.

  First adjust the position of your face so that it fits in the face in the form of framework
  (back-button will be inactive at the moment.

  Once your face has been correctly positioned, the recording will start. See the red dot for recording in the upper left.
  Start moving your neck very slightly to the left and to the right as the guide, it shows to you. Now your neck up and down. You need to repeat the movement of your neck left and right and up and down several times... Just look at the guide...

  Registration to complete, after having repeatedly moved your neck left, right, up and down. Click the button for the test of authentication.
  There are two possible outcomes:

  -If the authentication (or updated) fails, click on and register again
  -If the authentication or updated is successful, click on and create an account

  Choose your Windows user name, the full name, the destination of Login, password
  And re-enter the password fields and then click.
  Return to the management screen. The registered account name will be displayed. Clicking on it will cause the image of your face to be displayed to the left. Click close to close the software (.. and come back at the beginning of the presentation...)

  To update your profile of face recognition choose and highlite your username
  and click on update.
  To update your registration with practitioner just click Next and the guide will start.
  If you choose to ignore the recognition will start without practicing.

  Check these steps and your face recogonisation should work fine

• Satellite L750 - face recognition (more rant of partition)

  With this Satellite L750 - I just, I would say that I'm getting a little cheesed off with it! I thought that Toshiba has improved, but maybe not.

  When I click on the face recognition program, all I get is a window that says "you are not authorized to perform this task - please contact your administrator for help"-great! Any ideas?

  And the drive is partitioned into equal parts between C: and D:. I want to reduce D: and extend C:, but to do that I need a third-party program like W7 disk management doesn't let me do. Why on Earth put in two equal partitions! Maybe I'll empty the bunch and do a clean install of W7 Ultimate (I have a permit) - Tosh is simply a hash of it in my opinion...

  Post edited by: mikeharry

  Hay

  Who cares what are Toshiba? Toshiba offers portable computers with factory settings. No one force you to use while it is. Create the initially and later recovery disc you can do with the partitions you want.

• Satellite L350-17R - face recognition and webcam driver

  I have the driver and software of the foregoing the laptop above. Initially, it was a Vista but I have upgraded to Windows 7 Ultimate, and thereby lost the webcam! I wish that the use of this return. The drivers are for vista 32-bit, but they would now work its future Windows 7?

  How will I know that its working properly and how do you manage the webcam anyway?

  * Face recognition *.

  I heard that this Setup works correctly +(Rumours I know). + can I say it works very well for them and help them with proper guidance?

  Driver d/l this site details:
  WebCam V1.7.231.1126L
  V2.0.17.32 face recognition

  If you do not find Windows 7 drivers for your model mobile, you can either try to install Vista or Win7 drivers drivers designed for the newest model of laptop.

  I tested the tool of facial recognition on my laptop. It is interesting and funny, but maybe not the best way to connect. By mistake (light) your face will not be recognized correctly.

• How do I re enable face rcognition for Windows 7 satellite C655 with Intel core i 3

  Dear Sirs Maam:

  How can I turn it back on my HP satellite 655 laptop with windows 7 (FACE RECOGNITION/alerts ECt.)

  Have you reviewed the documentation accompanying it or the manual that came with your laptop for instructions? In addition, manufacturers of Toshiba Satellite laptop brand, not HP.

• How to connect with face detection in windows 8

  Hello

  I read somewhere that it has new feuture in windows 8 to connect with face recognition.

  can you tell me please how can I use it?

  You could talk about picture password.

  http://Windows.Microsoft.com/en-us/Windows-8/picture-passwords#1TC=T1

• HP probook 4530 s - face recognition does not. How can I delete information provided for this

  How can I delete information of face recognition with which I have provided my HP Probook 4530 s when I started the unit? I do not use the software because it does not work when I try to use it and prefer the fingerprint reader.

  Hello

  Uninstall the system of "facial recognition for HP ProtectTools.

  This will remove the data (you may be asked to confirm this choice).

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  There may be second solution (I am not able to check it out).

  Open the HP ProtectTools Security Manager. Look there for the recognition of face on the list.
  Check all the options of this software. There also may be an option to remove this information.

  If you want to check the latest version of this software, then you can download it from here.