Failed due to lack USB.inf

Similar Questions

• System OR Configuration: (Hex 0x8004041F) the operation failed due to lack of dependence.

  I went to start one of my vi of today and I get this message: NI System Configuration: (Hex 0x8004041F) the operation failed due to lack of dependence.

  No one knows what it is or how to fix it?

  I finally fixed it.  After a complete repair of all my software from National Instruments does not solve it.  I've updated my fpga, labview real-time for 2013 SP1.  Everything seems to work again.

• The installation of my recently acquired HP J3680 failed due to lack or the 'print spool.

  Original title: EU tive an instalacao da HP j3680 interrompida por falta "of printing spool" Como procedo?

  The installation of my recently acquired HP J3680 failed due to lack or the 'print spool.

  What can I do?  You have a possible solution?

  Thank you

  Fernando

  Hello

   
   
  What is the exact error message that you receive?
   
   
  I suggest you read the steps from the article below and check if it helps.
   
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
   
  If you want to support in your language, then I suggest you check out the link below.
   
  
  http://support.Microsoft.com/common/international.aspx

• backup failed due to lack of disk space

  I get the message that there is not enough disk space for the scheduled backup.  The c: drive is almost full (12KO available) but the D: drive is empty with 111 GB available.  I don't know what to remove to allow more space.

  The message reads as follows:
  There is not enough space on your Windows drive to prepare for the backup of your files. At least 400 MB of free space is required to continue. (0 x 81000014)

  Backup in the past has been to c:

  Hello

  There is no point backup on your hard drive

  If it fails, you have lost everything

  and if you've been save in C: what happens if Vista crashes? Lost data!

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  __________________________________________________________________________

  Low space on the C drive:-read this;

  see if this program helps you to determine what is taking place:

  http://www.Jam-software.com/treesize_personal/

  ________________________________________________________

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  _________________________________________________________

  Move your folders and files of the user to a different partition

  http://www.vista4beginners.com/move-user-files-folders-to-another-partition

  _________________________________________________________

  Disk Cleanup:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  1. By clicking on the Start button to open Disk Cleanup , on all programs, accessories, click System Tools, and then click Disk Cleanup.

• In the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• If the disk cleanup: drive selection dialog box appears, select the hard disk you want to clean and then click OK.

• Click the Disk Cleanup tab and select the check boxes for files that you want to remove.

• When you have finished select the files you want to delete, click OK, and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

• Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

• System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

  Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

  In some editions of Windows Vista, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. This information will also be deleted. For more information about system restore, search Windows Help and Support 'system restore.

_________________________________________________________

also scan for malware

Download update and scan with the free version of malwarebytes anti-malware

http://www.Malwarebytes.org/MBAM.php

__________________________________________________________

and read these information from microsoft on windows optimization

http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Wamp server which could not start due to lack of MVCR110. DLL

  I installed a wamp server that failed to start due to lack of MVCR110. DLL. but later, I downloaded the MVCR110. Update the DLL and install and the application started successfully. But the apache installation failed due to lack of VCRUNTIME140. DLL. This is why, wamp doesn't. Please, help me. Thank you.

  This issue could if the Package redistributable Microsoft Visual C++ 2010 is not installed correctly.

  I suggest you to uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package to check if it helps.

  Follow the steps below:

  Step 1: uninstall the exit Microsoft Visual C++.

  (a) press Windows key + x and select programs and features.

  (b) right-click on the Microsoft Visual C++ , and then uninstall it.

  Step 2: download the latest Microsoft Visual C++ and install it.

  See the link below:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=40784

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• Photosmart C7280: Photosmart C7280 disappears don't reinstall due to lack of HPZPRL40

  8 days ago, I tried to use the HP Solution Center to scan from my Photosmart C7280.  Solution Center could not say that the device has not been correctly in place and re - install.

  I tried a reinstall that failed due to a lack of HPZPRL40 (of course it was not obvious that the dialog box with the error was empty).

  The search of the forums I have uninstall leared to use level 4 in the Util/CCC of the downloaded/extract package directory.

  It worked!  Until a MS Security update has been applied this week and then the printer had disappeared again.  Now, despite the uninstallation of level 4 running, run SFC (and fix the mistakes of the), and reinstall, 3 - 4 times, always the installation did not finish.  I can add the device like a printer, but I really need the scanning functions.

  There must be a way to solve this problem which is not "reformat your hard drive.  Help!

  Hi @Pete-VO.

  I can help you with the error you receive.

  I just want to confirm, have you tried all the steps suggested in this similar post; Install error "the system cannot find the specified file" (hpzprl40.exe)?

  • using the cleaning brush / uninstall_L4
  • Clear temp directory
  • Download the drivers and full software features

  How your printer is connected to your computer. Is this installation USB or wireless?

  If it is USB, disconnect the USB cable from your computer when you run uninstall it?

  When you have uninstalled the printer software, it is possible that pieces of it may remain which could interfere with a reinstall. I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Printers HP monofunctional and multifunction - uninstalling the printer software.

  You can also delete files using disk cleanup - take care to put check marks in the selection boxes.

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  ' 1) click on start (Windows icon) and enter the Device Manager "in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper windows and then show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, right click on the device name in the list and then click on uninstall.

  For more information, see device for Windows 7 Manager information.

  Once you have removed everything, I would use Microsoft Fixit to remove all the hidden files, since it will fix any problem with the registry in the process.

  How to use Microsoft Fixit;

  1. Click on the above link and load the Web site.
  2. Click the run now button.

     

  3. If you get a long bar at the bottom of your page, click Run

     

• Once open, click Accept

  

• Choose to detect problems and allow me to select patches to apply

  

• Choose uninstall

  

• Display the list of available items, you can uninstall, check for anything which would be linked to the printer - also near the top of the appearance of the list of the HP Component Installer files.

  

  Note: You need to uninstall 1 by 1 using the tool of.

Once that everything is uninstalled, try to download your software again. Here is the link of drivers and software HP Photosmart c7280 full functionality .

If the problem persists, you could see if anything here will help you;  A "Fatal Error" (error MSI) appears on the computer during Installation of the software under Windows HP.

Please let me know if these steps solved your problem, or if there is anything else I can do to help.

I look forward to hear from you!

Thank you

• USB.inf-

  I'm trying to install a HP Photosmart D5360, installation gets so far and fails with the error message missing usb.inf My system runs on XP Home Edition, the computer was shipped with pre-installed XP, and so I don't have an installation CD.

  How can I recover the USB.inf to allow the installation of the printer must be completed.

  Thank you

  Microsoft support engineers seem to assume that everyone has a genuine bootable CD to install XP with Service Pack 3 on it.

  The fact is, that most of the people who seek help in MS Answers forums have never seen a genuine XP bootable installation CD in their lives and that he would not be able to get their hands on one.  It's extremely likely that "the manufacturer of your" will send you communicate with them, but which always seems to make the advice sooner or later.

  MSE responses that have links to KB articles or other ideas that start with "insert the XP CD...." "usually don't go very far after that and someone else should step in and do the fixing/help.  It's a shame.

  The usb.inf file is also not one of 3498 files that take care of the Windows File Protection, so there is no copy backup on your system.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).  I think it should be the same for XP Home SP3.

  You can download it and when you do, put a copy of the file in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\Inf

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called usb when the name of the file should really be called usb.inf (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You have to put the downloaded files in the correct folders on your system.

  I don't know if that will solve your problem or not, but at least you will not absent from the file.

• I have to cancel my account of temporary internet service provider due to lack of funds, I lose my settings/bookmarks of Firefox when I reactivate my internet account?

  I have to cancel my account of temporary internet service provider due to lack of funds, I lose my settings/bookmarks of Firefox when I reactivate my internet account?

  Settings/bookmarks of Firefox are stored in the profile on your computer folder. They will not be lost when you cancel your account with your internet service provider. They will be available when you reactivate your account, or if you switch to another internet provider.

• D1G64UA: Windows 10 update fails due to no space in the recovery Partition

  Try to upgrade Windows to Windows 10 8.1 upgrade fails due to insufficient space in the recovery on the D: drive Partition

  The size of the recovery Partition is configured at installation of the HP factory and it leaves only about 3 GB, which is insufficient for the upgrade of Windows 10 start the upgrade begins by creating files in the recovery Partition.

  I don't want to remove the Windows 8.1 recovery files that already exist on the D: Partition of Recovery of the construction of the plant and in fact, I don't think that the o/s will allow me to delete these files from recovery.

  Any help in how to run the upgrade of Windows 10 is appreciated.

  Glad to see that my post has solved your problem.

  Please click "Accept as Solution" to my post so that others will see that this thread has been resolved.

  Thank you

• on iPad Mini iOS 9.2.1 update fails due to low memory, even though 57 GB are available

  iOS 9.2.1 update failed due to low memory, although 57 GB was available.

  What is the cause and the fix?

  EN 57 is the size of your storage. There is no iPad with 57 GB of memory (live RAM). Have you tried to hold the home and power buttons until the iPad reboots? Also try double clicking the home button and close any open applications.

• Compilation failed due to an error of Xilinx.

  I've recently updated since LV2014 until 2015, and an FPGA VI who previously compiled successfully is no longer made. My goal is a 7951R and I use a module e/s of 6584. A few minutes in the compilation process, I get the below error. I found the White Book of OR describing this problem for 2010 and provide a patch, but this solution has failed for me. Curiously, I can succeed in the compilation of FPGAS screws very simple, but not more complex that were previously viable.

  LabVIEW FPGA: Compilation failed due to an error of Xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd" line 55: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\arrayLpIndx_593.vhd", line 22. array_in is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd", line 24: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd ignored errors
  -->

  Total memory use is 239156 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 11 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 04/12/2015-16:36
  Date recovered results: 04/12/2015-16:38
  Waiting time in the queue: 00:09
  Compilation of time: 01:44
  -Generate a Xilinx IP: 00:00
  -Estimate of the resources - PlanAhead: 00:33
  -Summarize - XST: 00:56

  Okay, that was weird.

  I discovered there was a small change between revisions. I had wrong initalized a table by exchanging the entries, so that the size of the array is 0 instead of n. normally, this should be taken at the beginning of the compilation, but this table null was used to initialize a shift register in a while loop and the exit from the while loop enters a loop, where my FIFOs operate. While the loop/shift register seems to be the essential element to the compilation of progress as he did and present it as a mistake of Xilinx. If you delete the while loop then the error is detected quickly and correctly identified.

• LabVIEW FPGA: Compilation failed due to an error of xilinx

  I'm getting a 'Compilation failed due to the error of Xilinx' you try to compile the code in LabVIEW 2013.The code has successfully compilated in labview2012. Any suggestions on what is causing this problem?

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" line 29: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaSetOutputDataEnable.vhd", line 37. cparametersignal is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" line 21: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd ignored errors
  -->

  Total memory use is 204688 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 4 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 2014/2/26 18:15
  Date recovered results: 2014/2/26 18:17
  Waiting time in the queue: 00:06
  Compilation of time: 02:02
  -PlanAhead: 01:16
  -Generator kernel: 00:00
  -Synthesis - Xst: 00:35

  Hi guys

  I think I can give you a helping hand on this.

  I have the same problem when I'm working on the Tutorial (2013) exercise 2 with Rio evaluation Kit.

  You can try one of the following option.

  Solution 1.

  1. in the VI package manager.

  Select 'Tools '->' Options'-> "General '->' package Installation"-> Unchecked 'mass Compile screws after Installation of the package.

  Solution 2

  1. in the VI package manager, uninstall the driver LCD

  2. unchecked "Mass compile screws after Installation of the package" (see Solution 1)

  3 reinstall the driver of the LCD screen.

  Mine did after Solution 2 and the compiler works.

  Hope it will be useful for you guys.

  Thank you

• Error opening a VI (LabVIEW: unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid.) The file could not be loaded)

  Hi all!

  Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:

  LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.

  This message repeats when I try else open a Subvi.

  Step by step:

  1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.

  2 - I have edited the copy, created Subvi etc.

  3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.

  4. then I tried to open the next day and... bug! I just couldn't do

  What can I do to open/recover the VI?

  I am using 32-bit LabVIEW 2016 in a Windows 10

  I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.

• Group Policy infrastructure failed due to the error below. The specified domain does not exist or could not be contacted.

  using several Windows 2003 domain in an attempt to push the msi using Group Policy is following on xp sp3 machine error

  Group Policy infrastructure failed due to the error below.
  The specified domain does not exist or could not be contacted.

  Note: Due to the GP Core failure, no other component processes Group Policy policy.  Consequently, status information for the other components are not available.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads