failed installation integrated webcam

The first time trying to use the webcam, it showed an error message. Failed software update attempts. Meanwhile, "Imaging device" or the webcam is not listed in Device Manager. What can I do?

 

Hello

 

What is the brand and model of the computer?

 

If you have problems with a built-in webcam, it would be best to go back to the manufacturer for assistance.

Tags: Windows

Similar Questions

  • Satellite R630 - integrated webcam does not

    Hello

    I hope someone can help me.

    My built-in webcam on my Toshiba Satellite R630 spontaneously stopped working in the last two weeks.

    I tried:

    -Check if it is enabled in the BIOS and there is no option to select a webcam here.
    -Restore my laptop computer to a previous state when the camera worked. This no longer works.
    -Updated the driver for the webcam - it installs the driver but then it disappears and nothing happens.

    A few things that it might help to know:

    -In Device Manager, "imaging devices" are missing, so I can't find the driver for the webcam here.
    -J' used to get a pop-up whenever I turned on my laptop which was loading a webcam bluetooth but saying that he could not. This stopped happening; I think I turned it off in msconfig.
    -It is not a hardware problem
    -Yesterday, I had a weird time breakthrough - I downloaded an app on my phone to try to use it as a webcam through bluetooth. I had activated bluetooth on my phone and laptop. I plugged my phone into my laptop and the pop-up the camera bluetooth (see previous point) came, but this time worked without the error message. However, instead of my phone works like a webcam, the blue light came next to my integrated webcam and who has started working. I thought it was fixed then all closed and ejected my phone and webcam stopped working again. I tried to repeat this sequence, but with no joy.

    I'm really frustrated and ideas. Can anyone help?

    Hello

    If imagine device isn't listed in Device Manager, it means that the module is not found. Even if the driver is not installed, the module must be included in the BIOS as imagine device, unknown device, etc.
    But this isn't the case

    So I think there are two possibilities: the module's fault or the connection between the module and the motherboard (Controller) isn t put in place.

    As far as I know the internal webcam module is connected to the USB controller.
    If the connection drops (cable) the module will not be recognized in Device Manager

    From my point of few, it must be a nuisance material

  • Satellite T130: integrated webcam has stopped working

    Hi, I have the same problem of the bellows of the question, as I looked around and I was not able to find the answer I need.
    I have a Satellite T130 and, suddenly, the integrated webcam has stopped working properly. A blue light is on, but there is no picture. What can I do?
    Thank you

    Hi mate

    I have the same problem, sometimes using my U400.
    This happens if the room is dark for the camera.
    If something like this happens to you that I recommend that you keep your finger in front of the webcam for a short period.
    After that, the image of the webcam should come back again in my case it worked.

  • Integrated webcam has stopped working on my laptop Satellite

    My laptop integrated webcam has stopped working, I tried to check the properties of the device and uninstall and reinstall the driver, but all I get in the device status is

    This device cannot start. (Code 10)

    The I/O device is configured incorrectly or the configuration of the driver settings are incorrect.

    I can't find anywhere to change something as im don't know what to do.

    Can you please tell us which model of laptop and what operating system are you using?

    By the way: since when did you notice this problem of webcam? It started one day to the next?

  • 15 - n010TX: my HP Pavilion does not detect the integrated webcam

    Mr President.

    I have an integrated webcam which worked perfectly until recently. My laptop came with Windows 8 in 2013, and I upgraded to 8.1 Windows. However, now my computer is not able to detect the integrated webcam. I know that it's a software problem, because the material could not have been damaged.

    I tried to install software youCam"with the help of the HP Recovery Manager, and it was installed successfully. However, when I open YouCam, it does, "no available camera detected. Please check if the camera is connected and try again. Even Device Manager has no other choice "imaging devices". I guess that something disabled the webcam, and for some reason, no driver is able to turn it back on

    I need to get this camera working. My product name/number is 15-n010TX. Please let me know what I can do...

    Thank you

    Try a hard reset as follows:

    (1) remove the battery and unplug the DC power adapter.
    (2) press and hold the power button for more than 15 seconds.
    (3) plug the DC power adapter (leave the battery for now)
    4) press the power button

    Please post here your positives or negatives in your thread.

    Customer self repair library

    http://h20464.www2.HP.com/index.html

  • Integrated webcam not working only not with Skype in Windows XP.

    Original title: webcam on compaq presario cq60

    I have a compaq presario CQ60 with integrated webcam.  I have tried Skype and can't find the webcam, and it is not automatically kick in even if it is set to video.  Can someone tell me where the webcam can be localized.  Thanks, Denise

    Hi Denise,

    Thanks for the updates.

    Please contact Compaq support for assistance at the level of hardware problems.

    Please get back to us with the State of the question.

  • Error when you try to install Mass Effect 2: failed installation. A data error occurred.

    problems of mass effect 2

    Hello

    I have windows XP media center edition 2005 and are unable to install 2 mass effect. After some installation, it says: failed installation. A data error occurred.  It is supposed to be windows 7 compatible. I tried running the compatibility problems, but the same thing happens. Someone knows how to fix this?

    Hello

    Try the methods below:

    Method 1:

    Try to copy the contents of the CD to your hard drive to check if your CD has gone wrong.

    Method 2:

    Try to install the application with administrator privileges and check for the issue.

    If you always fall on the issue, you can view the query in the mass effect Community Forum:

    http://meforums.bioware.com/viewforum.html?Forum=127

  • Should I Laptop Integrated Webcam Driver on my Vista laptop?...

    Should I Laptop Integrated Webcam Driver (1.04.01.1011) on my Vista laptop?  I would like to delete everything about the Dell cam because I don't use any... no harm to remove the following also...?

    Live Cam Avatar Creator

    Live Cam Avatar Manager
    Reference Dell Webcam Central ter

    Also instructions on how to disable my touchpad... I prefer to use the mouse...

    I have an ipad and Facetime I often use... Thank you for any information... I appreciate it...  CricketM

    Default OS of Microsoft have many WHQL drivers/software for the 3rd party hardware already installed

    on the pc, DELETE will not make much difference... In addition, dell, or other suppliers are running services &

    you want to stop, change, open cmd or go to run... Services.msc type: in msc, position yourself on the service, double

    Click the value: manual, or stop the service or Autorun. In the Properties window, locate the other service

    software dependntce, which will be / could create problems...

    In addition, given the services 3 unwanted dell running, slow performance

  • I have a new laptop and my integrated webcam does not work

    I need to get help fixing it. It's a brand new computer and the webcam does not work. When I try to access the program, it said that I need to plug a camera

    Hey amaury Muñoz.

    Welcome to Microsoft Answers Forum.

    1. can you please tell us the model number of your computer?

    2. is there a built in webcam or what is the model of your webcam?

    Can you please give us a little more detail on what is the specific error you get when you try to use the webcam?

    Check if you have the drivers installed for your webcam.

    As you say that it is a Dell computer, you will need to go on the http://support.dell.com website to download the driver of your webcam installed.

    Click on support and drivers.

    On the next page, it asks your name and your number.

    Select the exact model of your laptop.

    This will bring up the option to select your operating system. Choose Windows Vista or Windows Vista 64-bit.

    A webcam installed usually appears under the software - multimedia, but it may be different for your model.

    You can choose to install now or download. Once it is downloaded and installed, then test again to see if your integrated webcam works.

    You can also contact Dell for support, since this is a brand new computer. Here is a link to Dell's Support page options:

    http://support.Dell.com/

    Thank you.

    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

    Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

    http://support.Microsoft.com/kb/958044

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Acer laptop with Windows 7. Need to know how to activate the integrated webcam on?

    You want to know how to turn on the camera on my computer acer laptop with Windows 7. The webcam is built in

    Buckeyes I have the last Acer with integrated webcam and turn left click your windows icon in the lower left corner, all programs that are open, scroll down from the top for Acer Crystal Eye Webcam and click to open, and then click the same again and your we will open the cam.

    See you soon

  • Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

    Hello

    I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
    It seems that the built-in webcam is not connected.
    Thank you

    See Sony support site or their forum, this is a Sony webcam

    And no this isn't a feature of device, or something that should appear in the devices & Printers

  • Windows 8 (x 64) - upgrade of Windows 7 Ultimate (x 64) DVD (in English) is a failed installation

    After an error starting during the update of the victory 8, I can't go beyond the failed installation of the installation dialog box.

    I tried some marbles or footprints, and every newspaper, the forums say look are empty or not exist.

    Where am I going to clean the registry/file system to make the process of installation from scratch?

    Thank you

    I had to take a multiple step approach:
    • created a new admin user account
    • connected to this account
    • turn off all apps "run at startup".
    • disabled the Norton 360 firewall
    • restarted
    Windows 8 Pro upgrade in place installation finally occurred.
    Thanks for your help.
  • I'm unable to open ITunes and integrated webcam by clicking on the icon.

    When I try to open my webcam by clicking on videos on the dock icon, and then clicking the webcam icon I get the loading circle by my hand to the mouse for about 1/2 second, then it disappears and nothing happens. This also happens with my Itunes. I tried to change the permissions on it. Also, I tried right clicking and then clicking Open. None of this seems to work. Help, please!

    Title: Dell inspiron 15r problem with built-in webcam of opening.

    Hi connor ellingson,.

    (1) that you get an error message or error code?
    (2) is the issue limited to ITunes and the integrated webcam?
    (3) have you made changes on the computer?

    Try to open the ITunes and the webcam integrated for the destination folder. Check if it helps.

    Method 1-

    You must run the fixit of article-

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Method 2-

    I recommend you to perform a Clean Boot.
    Put your boot system to identify if a third of applications or startup items are the origin of the problem. You must follow the steps in the article-

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: you must follow step 7 of article to return the computer to Normal startup after you perform the troubleshooting steps.

    Method 3-

    You should consult the article-

    How to remove a computer virus?

    Note: the antivirus will try to fix bad sectors on the hard disk damaged by viruses. Data on these areas could be lost in the process. Proceed at your own risk.

    In addition, you can also check if the problem persists on an other user account.
    If so, then check out the articles.

    Create a user account

    Difficulty of a corrupted user profile

    Hope this helps!

  • integrated webcam not working not not in windows8

    my laptop is dell inspiron 15 with preinstalled windows 8 that has been activated,

    My integrated webcam and photo app worked very well. Suddenly one day, my photo app showed that 'connect a camera' and my device under devices Manager showed no integrated webcam Imaging.

    I tried and installed photo app and updated, tried this and that and did not know what I did, my camera started working and Device Manager showed a webcam integrated

    Now it's the same thing. I don't know what to do. If this thing happens again and again, what to do.

    How it can be corrected. pl help

    Hello

    Thanks for your help,

    but the problem is solved, do not know how

    I tried the update of the camera tool, maybe it helped

    next time that happens, I will try the suggestion you gave (reinstall the driver)

    Thank you

Maybe you are looking for

  • Is satellite A10 - possible to install the new graphics card?

    Hello I have a videocard Satelite A10, 2.2 Ghz, 712 MB of RAM, provided with your computer. I just bought the Sims 2 and thought from the specifications that I would be able to play on my current card. However when I try to run it it gets to the intr

  • half-wave rectified filter circuit/oscilloscope measurement

    Hello everyone, I hope I can get help on this fundamental issue, I'll have. University online, with which I will not help me, so I hope that I can quickly get assistance here. I have the myDAQ NOR, I have to build half rectified filter circuit with a

  • Transition of container moves slowly

    Hi all I want to pass a B container in an another A touch event. But the container B do not keep pace with the stroke of a finger. Container { id: containerA background: Color.Yellow horizontalAlignment: HorizontalAlignment.Fill verticalAlignment: Ve

  • I use IE9 and cannot download files on Web sites. Is there a solution?

    I use IE9 and cannot download files on Web sites.  It allows me to locate the file, and then he says your file is downloaded, but just keeps spinning. This happens on several sites and when I call their tech support, I said that there is a problem wi

  • Modeling 3D - 2D images.

    I did a 2D profile from a .obj file that is on the scale. I know there is a way to draw directly on a 3D model, but you can apply an image to it?