Failed replication TMS and data VCS

Similar Questions

• TMS and virtual VCS

  Hello

  I know that the VCS and TMS can be virtualized.

  On the documentation, I found that the VCS can be deployed on the same host as the other virtual machines (cohabitation) following some guidelines for sizing (resourses must be allocated 1:1, it means that there is no excess applications).

  I also read that MSDS can also be virtualized, following the same guidelines of resources:

  "Cisco TMS can be installed in a virtualized server environment as long as the virtual machine by a Cisco TMS is allocated sufficient resources dedicated to meet the requirements of server and hardware for installation. The resources allocated to the Cisco TMS server instance must be dedicated and not shared with other instances of server. ""

  What I do not know if the TMS accepst co-residensy with other applications. Which makes me doubt is:

  "Cisco TMS is resource intensive with specific server requirements, which increase with the level of activity and the size of the managed network video. With the help of a server that hosts other applications or Web sites for accommodation Cisco TMS is therefore not supported. "

  I don't know if this means that non-corresidensy is supported or that no other application in addition to TMS must be deployed on the same OS.

  What I really want to accomplish with it is to virtualize the TMS, the VCS Highway and control of the VCS on the same server of UCS. Would it be supported by TAC?

  Kind regards

  Hi, this means that the TMS server should be dedicated to the application of TMS. No other hosted applications should be present on the same OS.

  Hope that helps.

  Sent by Cisco Support technique iPhone App

• TMS, VCS and Jabbber "impossible to connect to the TMS on the VCS agent".

  Dear,

  We have Cisco TMS, VCSC and jabber deployment, we did before commissioning the VCSC and TMS and jabber worked well, but after the upgrade the VCSC v7.2 to jabber version 8.2 has stopped working and I can not connect more and when I go to the TMS and connect to the VCS I get "unable to connect to the TMS on the VCS agent" Please notify

  What TMS version do you use?  And you are using Extension of provisioning of the TMS (TMSPE)?

  Looks like you are using TMS Agent Legacy, which has been supported in VCS X7.2 and has since been removed from X8.1.  You will need to migrate to TMSPE and very probably upgrade your server TMS as well if you do not meet the minimum version.

  Cisco TMSPE 1.0 Deployment Guide

  Here's the guide deployment for TMSPE 1.0, there are newer versions, but 1.0 is one that you want to migrate from legacy Agent TMS.  Once installed and migrate your data, you can then go to the most recent version, which is 1.4 (see below).

  Cisco TMSPE with VCS 1.4 Deployment Guide

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

• Header and data in an incremental file

  Hello. I am Sorin.
  After a few days of reflection and trying, I decided to ask for help.
  I need an idea or a sugestion, or even a good exemplification for my problem. It's a simple reflection at first, but I met a lot of problems.
  I have a downloaded photo with my general idea.
  I want to write the first and data header to 1 text file line/sec. The file must not exceed 65536 rows (excel limit), so I calculate them, I put a condition for limiting, and after this registered nominative must move to the next file (file_1, file_2 file_3 e.g. and so on).
  I tried many ways, many loops, but not the result I aspected be.
  I mention that I have the modules:
  -write the header in the file (write on a spreadsheet file);
  -write data in the file (write on a spreadsheet file).
  -calculate the n lines in the file (.vi)
  So, if you help me please, just make a square or something instead of this module. I made them separately and they all work very well.
  I avoid the goto function because I can't control it. Maybe that's why I failed.
  A pseudo schema with loops and son would help me. I dare more.
  Thank you.

  Dsasorin

  check this

  

• Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 will not update

  Today, I upgraded my Vista Ultimate Edition of Windows 7 Ultimate and checking the updates it listed 10 important updates. I went back in and there was still the major update 1 "Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 (SP2) who refuses to update which results in an error. I tried several times with the same error that results. Any suggestions as to why?

  The update could not update with no error code, just says 'update failed." However after that restart and check the view of the update the update again must have occurred because it is no longer returns in search of updates.  Thanks for responding to my problem

• Error when you try to install Mass Effect 2: failed installation. A data error occurred.

  problems of mass effect 2

  Hello

  I have windows XP media center edition 2005 and are unable to install 2 mass effect. After some installation, it says: failed installation. A data error occurred.  It is supposed to be windows 7 compatible. I tried running the compatibility problems, but the same thing happens. Someone knows how to fix this?

  Hello

  Try the methods below:

  Method 1:

  Try to copy the contents of the CD to your hard drive to check if your CD has gone wrong.

  Method 2:

  Try to install the application with administrator privileges and check for the issue.

  If you always fall on the issue, you can view the query in the mass effect Community Forum:

  http://meforums.bioware.com/viewforum.html?Forum=127

• Windows XP: My hard drive failed in part and I can't access the folder "my documents"...

  Windows XP SP2 from the CACLS
  Windows XP: My hard drive failed in part and I can't access the 'My documents' folder, windows it says ACCESS_DENIED. I tried grant permissions through CACLS and switches appropriate, but I still get messages ACCESS_DENIED. Can someone help me please I have 60 GB of data on it to be recovered. I backup this but is 3 weeks old. Regards Alan

  Hi Malkeleah
  Thanks for the reply, the reader had not failed, but windows had use of the access denied files because I was on a separate computer with a new master drive. Now recovered data and support to the high new outside. Thanks again for your help. Alan

• VCS - C cluster and Cluster VCS-E with Movi 4.6 register and call interruption

  Hi all

  We have VCS - C cluster and Cluster VCS-E with Movi 4.6 register and call interruptions. The point is, if the appeal or record comes from the Internet. We have the sip proxy model vcse--> vcs - c record. The strange point is, if run us in mode not cluster with only 1 vcs - c, then the call works very well or so over 1 minute. We also have findme. The call internal registered locally (VCSC) works as well) the case appears if the active VCS - c cluster and the movi has been listed in the subzone of the crossing of VCS - c
  VCS versions are x.7.2.2 and tms 14.2.2
  Thx for your comments

  Sent by Cisco Support technique iPhone App

  Hi friend

  The issue you are experiencing is a known limit of Jabber of telepresence. This happens when registration of the device is transmitted by proxy to the VCS control, where VCS are clusters. Probably what is happening:

  -Jabber client records through the fast track to a control in the area of the highway crossing.

  -L' check requires authentication

  -When the customer registers again every minute (registration of SIP (re) process normal), the registration request is sent to one of the other controls in the cluster.

  -The customer then completes the current record and authenticates back to the other control

  -The client (Jabber) will tear down the ongoing call when there is re - authenticate registration

  This problem is resolved in the current version for Jabber for iPad. The current version of Jabber for TelePresence still has this problem. Default: CSCud17952

  Another user has reported the same issue. See the following:

  https://supportforums.Cisco.com/message/3967325#3967325

  Zachary Colton gave the answer. I simply copied his explanation and pasted here.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• R12: Copy a group of companies with configurations, metadata and data in the same instance of OA

  The idea was born to a very common condition between the companies IT. pre-sales and pro-ventes groups do various tasks, including the response of the RPF/RFI, PoC, building, Solution architecture, customer demo etc. Ususally they do not have the dedicated application instances, or rather they do not find a sufficient number of cases of applications dedicated to deep study of the road. Every other day a group cries out for an Apps instance and the same gets lift for senior management in short time. It gives a lot of pain to the infrastructure/DBA groups because they fail to meet people like them, due to the limited availability of free nodes, resources, networks and space etc.
  
  I have a Vision of the R12.1.3 (tell SID = VIS1213) installed on a Linux machine. The box is quite busy with his hearts limited, showing little free memory and the attached SAN has insufficient free space remaining. A group of Oracle Apps pre-sales consultants, says "Group 1", is the use of this.»
  
  Now the 3 other groups are asking for a R12.1.3 Vision instance separately for different reasons below. Each of them wants the instance again and do not share with others.
  
  Group 2 for deep study of the road against a critical response to RFP
  Group-3 for the development of a point of contact for a customer demo
  Group 4 for the manufacture of PUK media on some business processes
  
  In this scenario, I should install 3 distinct Vision of R12.1.3 (using CDs or downloaded zip) or clone VIS1213 in 3 different places with different SIDS, possibly on one or more separated nodes (as above Linux node has insufficient free resources). In this case, the need for available server resources and disk space multiplied by 3, so that DBA maintenance for these 3 new instances is added.
  
  Hope that I have clear air up to this point.
  
  Then I was thinking if we have "virtual instances" within an existing instance of Apps, by copying from a vertain org level. First I thought I'd take THE level, but it will not work if an instance of group to work with HRMS claims. We must therefore take business group level. After that we will create the appropriate role and responsibility, user profile options so that the new user can see and work on the new BG and data area down only. It will be like a separate instance to use.
  Benefits of my desired task will be
  
  -no separate server resource, the required network
  -no additional DBA not involved maintenance
  -no separate required backup plan
  
  So here it is to create 3 new "virtual instances" right within the same instance of VIS1213. New groups will have same URL, same existing TNS details but 3 credentials different existing access. Each of them would be limited in a way so that they can not see each and other data and can not hurt each and other changes.
  
  This can be achieved if we can copy an existing group of its activities with org structures, metadata and data, within the same instance. Oralce planning cannot be copied within the same instance configurations.
  
  What I've done so far was I manually created a new BG, attached an existing sobbing (CoA, Agenda / currency), created a new, copied and modified accounting structure flexfields before fixing, created the new ORGANIZATIONAL unit, and then a new InvOrg of master and a new InvOrg clild, defined the profile MO some GL and HR profiles. Then I extracted finished master and data assignment article category Masters against a master/child existing InvOrg, updated the data for newly created InvOrgs, inserted into tables insterface and ran seeded import conc program element. Except for a few, all data have been loaded into base against new InvOrgs tables.
  
  Then I tried with master provider (with sites and contacts). A few AP configurations are required, and then data provider (+ contact + site) have been loaded against OR newly created (under new BG) base tables.
  
  I do not proceed after that. I'm currently looking for ideas from the experts on how to go further.
  
  Planning is able to create this kind of 'virtual instance' within the same instance of OSTEOARTHRITIS?
  
  PL nowadays return.
  
  Thank you and best regards,
  Castelbajac Dhara
  E-mail: [email protected]

  PL don't post duplicate topics - R12: copy a group of companies with org, configurations, metadata & data structures

• Additional logging with Oracle 10 g 2 streams and Data Guard

  Hello
  
  I have a physical environment with DB Oracle 10 g 2 and Standby with Data Guard DR CONF. At the present time, this environment will be extended to a pattern of replication using 2-way Oracle Streams Replication (for replication to the central office of this branch, other channels will be added soon). The primary DB is replicated to the other primary DB (at the telephone exchange remotely).
  
  So, there's my question: it is completely necessary to specify an additional record on data sources (primary) to set the 2-way Streams replication? and, if it is completely necessary, then, can configure additional connection on primary without affecting their physical Standby, or what I have to do something special?
  
  Thanks in advance.

  Yes, for the streams you need additional registration. There is no impact on databases physical standby.

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• Cannot delete items in documents and data for each application

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Can someone help me?

  Thanks in advance

  Omari says:

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Explain what you do and what happens when you try to delete the data.

• HELP: My Macbook Pro tells the bad year and date!

  It's horrible. I am a user of Macbook Pro of Israel. The current date SHOULD be September 1, 2016, but that's what I get for some reason any. It was good but I messed up it somehow and I tried over and over again but I can not change the year and date! It says 28 AV 5776 instead of September 1, 2016. PLEASE SAVE ME!

  what I mean:

  Go to System Preferences > region and language and make sure that the calendar is set to Gregorian

• How to remove documents and data in the iphone app podcast 6

  I know how to remove each podcast, but how do I remove "documents and data" in the application of podcast?  I have more than 4 GB of data and documents.

  I think I found a thread that is useful for you: https://origin-discussions-us.apple.com/thread/6822791?start=60 & tstart = 0

  Sonny3301 answer worked for me, «...» "(The steps are: 1) download the Battery Doctor app on your iPhone (it's the first one that appears in the search) (2) hit the"Junk"icon on the bottom and tap 'Clear Cache'." (3) repeat until your space becomes available. The people that I learned this technique of some other bulletin board said it took 10-15 tries; It took me + 30 attempts. The memory savings start small at first, then it starts to hit hundreds of MB at a time. It sounds crazy, I know, but I went to have less than 200 MB of free space for 3.6 GB. Great thing, it was my podcast app had only been hogging to 1 GB of data, so the app battery doctor found 2.6 Go elsewhere. Good luck to you all and you are welcome. »