Failed to compile without errors

Similar Questions

• Compilation failed due to an error of Xilinx.

  I've recently updated since LV2014 until 2015, and an FPGA VI who previously compiled successfully is no longer made. My goal is a 7951R and I use a module e/s of 6584. A few minutes in the compilation process, I get the below error. I found the White Book of OR describing this problem for 2010 and provide a patch, but this solution has failed for me. Curiously, I can succeed in the compilation of FPGAS screws very simple, but not more complex that were previously viable.

  LabVIEW FPGA: Compilation failed due to an error of Xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd" line 55: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\arrayLpIndx_593.vhd", line 22. array_in is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd", line 24: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd ignored errors
  -->

  Total memory use is 239156 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 11 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 04/12/2015-16:36
  Date recovered results: 04/12/2015-16:38
  Waiting time in the queue: 00:09
  Compilation of time: 01:44
  -Generate a Xilinx IP: 00:00
  -Estimate of the resources - PlanAhead: 00:33
  -Summarize - XST: 00:56

  Okay, that was weird.

  I discovered there was a small change between revisions. I had wrong initalized a table by exchanging the entries, so that the size of the array is 0 instead of n. normally, this should be taken at the beginning of the compilation, but this table null was used to initialize a shift register in a while loop and the exit from the while loop enters a loop, where my FIFOs operate. While the loop/shift register seems to be the essential element to the compilation of progress as he did and present it as a mistake of Xilinx. If you delete the while loop then the error is detected quickly and correctly identified.

• Compilation failed due to an error of Xilinx (410)

  Hi guys,.

  I am compiling my FPGA with the Service Cloud to compile code. I have a FPGA code that compiles without any problem. When I put a knot of FIFO of DMA in this code, I get the error on the Xilinx compiler at the following address:

  ERROR: HDLCompiler:410 - "/ opt/apps/NIFPGA/jobs/CSD2awO_GQdD63p/NiFpgaAG_0000050c_CaseStructureFrame_0001.vhd" line 211: Expression has 66 items; 50 EXPECTED
  Netlist NiFpgaAG_0000050c_CaseStructureFrame_0001 (vhdl_labview) remains a black box, due to errors in its content

  The code compiles fine without the node of DMA. The DMA is a target to host DMA, 1023 long element (block of memory), the type of the elements is U32.

  There is something else on the block schema as well. When I copy the SCTL in a new VI without anything in it, it compiles without problems, without worrying if the node of DMA is here.

  Please find the extract VI and the attached summary of errors.

  All ideas are welcome.

  See you soon,.

  Norbert

  If the problem seems to be resolved...

  I deleted the DMA FIFO of the block diagram node and he still added. After about 40 minutes, I had a successful compilation. Weird.

• LabVIEW FPGA: Compilation failed due to an error of xilinx

  I'm getting a 'Compilation failed due to the error of Xilinx' you try to compile the code in LabVIEW 2013.The code has successfully compilated in labview2012. Any suggestions on what is causing this problem?

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" line 29: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaSetOutputDataEnable.vhd", line 37. cparametersignal is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" line 21: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd ignored errors
  -->

  Total memory use is 204688 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 4 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 2014/2/26 18:15
  Date recovered results: 2014/2/26 18:17
  Waiting time in the queue: 00:06
  Compilation of time: 02:02
  -PlanAhead: 01:16
  -Generator kernel: 00:00
  -Synthesis - Xst: 00:35

  Hi guys

  I think I can give you a helping hand on this.

  I have the same problem when I'm working on the Tutorial (2013) exercise 2 with Rio evaluation Kit.

  You can try one of the following option.

  Solution 1.

  1. in the VI package manager.

  Select 'Tools '->' Options'-> "General '->' package Installation"-> Unchecked 'mass Compile screws after Installation of the package.

  Solution 2

  1. in the VI package manager, uninstall the driver LCD

  2. unchecked "Mass compile screws after Installation of the package" (see Solution 1)

  3 reinstall the driver of the LCD screen.

  Mine did after Solution 2 and the compiler works.

  Hope it will be useful for you guys.

  Thank you

• VB6 SP6 is no longer can compile without receiving an error

  Recently have been unable to change code VB6 and compile without getting an error.

  With the debugger in VB 2010, she points to the CerebusTwo.dll and said that the symbols were not loaded.

  I uninstalled the Office update that was causing the problem with the import of text in Access files, but there is no clear upward the VB6 problem.

  Does anyone know what update is the cause of the VB problem, or maybe a missing update?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• LOOK for iOS, 'HelloWorld' fails to compile

  Flash CS 5.5 v11.5.1.349

  Windows 7 Professional SP 1

  I get the compile error when you post AIR for iOS (Flash Cs 5.5). It does not, what is wrong, said simply that he was unable to compile the files.

  "Error creating files.
  Failed to compile... »

  The application is simple - is the example Hello World in the help section, but it still does not work. (Of course, I have all the necessary certificates created.) What is even more interesting, the same fla without changing file compiles well on Flash CS5.5 my colleague, even if (11.5.1.349) versions are identical.

  The only time I get that error is when a file is in use (or Windows thinks it's) because he has started or selected in Windows Explorer, then you will fail to compile the SWF itself. Otherwise, do not hit browse and specifically defining the path to export product also the error for me.

  Is generated all SWF? If so, it has a size (> 0Ko)?

  One thing you should definitely do more than overlay latest Adobe Flash CS5.5 AIR. This will ensure that you have all the latest patches and updates to AIR for iOS. This may solve your problem.

  Download the SDK here:

  http://www.Adobe.com/devnet/air/air-SDK-download.html

  Instructions on layering (disregard the version number difference, simply use the correct number of AIR, you're coming to overlap instead, from 13 to 16):

  http://helpx.Adobe.com/x-productkb/multi/overlay-air-SDK-Flash-Professional.html

  I also recommend to download and update Flash CS5.5 to have the latest version of Flash Player. This is so you can target and test using the version 16 (11.3 flash drive). Here is the download page for the Flash Player the latest debuggers, playerglobal.swc, etc.. :

  http://www.Adobe.com/support/flashplayer/downloads.html

  There is not a lot of information out there on how to install it in Flash CS5.5 but I'll give you the general jist:

  -Close Flash Pro

  -Install 2 browser plugins (activeX and plugin according to the debuggers)

  -Download the "projector content Debugger" and crush the FlashPlayerDebugger.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Debug

  -Download the "projector" and crush the FlashPlayer.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Release

  -Download the playerglobal.swc (make sure that it has named exactly that), then navigate to the default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\ActionScript 3.0

  -Create a folder in this path called "FP11.3" and place the playerglobal.swc in there.

  -Navigate to the default folder C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\Players

  -Duplicate the last FlashPlayer1x_x.xml file and name it FlashPlayer11_3.xml.

  -Change the file. Change the lines accordingly, the parts in bold are the changes:

  Flash Player 11.3

  Now you can restart flash and your target publication, you should see Flash Player 11.3 as target.

  To check 11.3 is installed correctly open a new AS3 document and paste this code and then run it using the DEBUGGER.

  Do not simply press CTRL +, it is just a player. Use CTRL + SHIFT + ENTER. You should now see the version followed 11.

  Here is the script code of the simple framework:

  import flash.system.Capabilities;

  trace (Capabilities.version);

  For using the debugger (CTRL + SHIFT + ENTER) I see: WIN 11,3,300,257

  For me using just came out (CTRL + ENTER): WIN 10,2,153,2

• Creation of stand-alone executable file with similar library files without errors of link

  I have an Executive Test that is run on two different test systems. Each stand has another card ARINC429. The old card use 429dll32.lib, while the most recent map use pci429.lib. Test Exec code only loads a single library file (using LoadExternalModule) depending on what the test bench has the card, but since there are many similar functions in both, ICB does not test Exec be built as a stand-alone executable.

  In CVI 5.0.1 I opens the "Create stand-alone executable file" and select "add files to the executable. I check the 429dll32.lib and the pci429.lib to include in the creation of executable, and then click 'OK '. When I click 'OK' to create the executable I have several link errors, one for each function both .lib files have in common.

  Is it possible for each of these .lib files to be included in the compilation without having to create two separate executables?

  eatmontr:

  If you use LoadExternalModule(), you need not include the .lib files in the Executive test project.  Refer to the CVI for LoadExternalModule help.

  Here's the info on the help:

  LoadExternalModule loads an external object module file. You need not list the file in your project or loaded as a module of an instrument.

  The file may be an object (.obj) file, a library file (.lib) or a library (.lib) import DLL.

  Here are a few articles to OR who can help.

  To access the plug-ins with CVI (with sample program) http://zone.ni.com/devzone/cda/epd/p/id/133

  How do I call dll if I have two functions with the same named in two different dll? http://digital.NI.com/public.nsf/allkb/5299ED8D43F3B5FE852563BF0056EBA6

• Windows 7 will not update, sticks on the search, but failed ultimately due to error KB8024001B.

  Windows 7 with SP1 installed pack

  Windows update sticks on the research with the CPU on 49-50% - svchost304 the question and the offending thread is

  TID CPU

  3852 50.00 213 ntdll.dll. RtlUserThreadStart

  but ultimately failed due to the error KB8024001B.

  I tried a lot of things without success. The software is activated

  Thank you Paul

  If you had to manually install KB3138612 your updated setting will have to be fixed to never look for updates

  The client to update existing would interfere with the more recent, that you are trying to install.

• Oh, Snap! Build request failed with the message: error

  Hello!

  I am working on an app for BlackBerry Playbook with WebWorks.  When I try to package it I get the error in the subject (Oh Snap! Application of Build failed with the message: error).  There is no more information.  I googled but can't find anyone else with this particular problem.

  Is there a log somewhere that I can read to see what is happening?  Everyone knows this?

  Thanks for any help!

  Oh, I almost forgot.  When I go into the output folder, the .zip file is there, but not the .bar file.

  Ok.  I finally found the code in command line to compile applications.  Here it is for others and reference later: first move the location of the bbwp directory, then run the command bbwp.

  CD "C:\Program Search SDK for Tablet \bbwp Motion\BlackBerry WebWorks"

  bbwp 'C:\myapp.zip '.

  Here is the link where I got the information of: https://bdsc.webapps.blackberry.com/html5/downloads/sdk, then click on "how to get running.

  For those looking to sign their application from the terminal, it is also possible.  First set up your computer, as described here: https://bdsc.webapps.blackberry.com/html5/documentation/ww_publishing/signing_setup_tablet_apps_1920...

  Then go into the same directory 'bbwp' as we did above.  Finally, run this command:

  bbwp g - buildId o

  This information can be found here: https://bdsc.webapps.blackberry.com/html5/documentation/ww_publishing/signing_your_tablet_app_191966...

  Sorry for that write when it is already available elsewhere on the web, but I feel like I should post the complete response for those who come across this message later.  I hope it can help someone who has the same problem as me.

• Authentication failed due to the error System.

  After spending my fundamental problem with Burrito and 0.9.3 I advanced and made the PlayBook in 90-minute tutorial.

  When running in mode 'on the desktop", the app works great and works.

  When I change mode "On Device" and that the running virtual machine Simulator, then I get the following error:

  Error occurred during the launch of the application installed on the device:
  Error: Authentication failed because the system error...

  I tried to run it without the Simulator VM has started and got the error could not find the device.  I also double checked the password, even if the VM simulator gave me a few problems when I changed passwords.

  Anyone who encountered this problem?

  On a side not, the .bar file was created for the application in the bin-debug folder.

  Hey, Logan,

  sounds like your conditioner ran finding, but when it came to deploy you stumbled upon an error. the only thing that comes to mind (as you already double check passwords) is either a firewall issue, you can check by turning off your firewall temporarily, or maybe your Simulator is not up-to-date (separate in the SDK installation). The latest version is the 0.9.3. Good luck!

• 7 backup fails and gives an error Ox81000037 (only 1 error message)

  I followed the remedy given in the answer to the problem ""7 backup fails and gives error Ox8007045D + Ox81000037 "without success."  That is to say, I disabled the protection for all readers, created a new restore point and then reactivated the drive. I checked that the drive I save uses the NTFS file system, and then run back to the top again.  I always get the message that the backup failed and the Ox81000037 error code.

  Help with this problem would be greatly appreciated.

  I had a similar problem also (Win 7 Pro) on the new installation.  But be careful with the installation of utilities backup/restore 3rd party as some suggest below.

  As others have said that your problem is probably due to the VSS (Volume Shadow Service) feature be corrupted.  I had MSE too but turn it off made no difference.

  In my case, it was because of software that included drivers for my motherboard.  There is a backup/restore utility which took control of the "false" Windows Restore and VSS feature & backup of MS of the system.

  Go to the system event log and sort through VSS.  Then search for errors on the VSS or the backup.  Is particularly important to look at the "Information" events that led to the error.  They are more revealing than the error itself real.  The error is misleading for me.  In any case, look in the Inbox details information for the process that was involved.  My bet is that you need a 3rd part/application that needs to be removed.

  I have fought with this problem for weeks and stumbled on the errant software.  I did not intentionally install it.  So look for software that could have been bundled with other applications or drivers.

  Good luck

  John

• Failed to compile SWF - pre-test

  All the

  I get a message failed to compile SWF.  This happens when I add a pre-test to my Captivate file which has a graduated test.  Everything works fine until I have add the pre-test.  Once I added the pre-test, I get the error even if I delete all the slides except 1 slide of simple text.  Can someone help me understand what is happening.  You can download versions of the Captivate file at the link below.  One is the file before the pre-test is added and one is, after the pre-test is added.  So frustrated.

  Download your files
  Please use the following identification number when prompted: 575874

  
  

  
  

  Hi Dan,.

  I see that you have applied some widget in Captivate PlayBar. You can try to remove it and check again?

  Regrads,

  MILIN

• When you try to install the------creative cloud without error 1. What is the problem?

  When you try to install the------creative cloud without error 1. What is the problem?

  Error code 1: "unable to install". Creative Cloud Desktop: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

• Failed to compile swf CP8

  Hello

  I am trying to publish or preview a course of CP8, but I still have the same error message "failed to compile swf.

  I don't have special characters... I can't find the problem...

  Help!

  Thank you

  Try disabling all the compression options in the preferences > project.  The Advanced Compression setting is often problematic.

  If this does not resolve the issue, save a copy of the project and start to hide groups of slides and republish each time until it seems to work.  Then hide the slides in THIS group to find out who could be shifted upward in the process.

  If this does not work, remove all the measures put forward.

  If this does not work, copy all the slides in a new project shell and republish.

  If this does not work, your project is probably toast.

• Backup fails with Invalid RECID error

  Hi all
  
  Please help me understand the guard-section layout
  
  below the text is
  [http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
  

  Backup Fails with Invalid RECID Error: Solution 2
  
  This solution is more difficult than solution 1:
  
  To create the control file with SQL*Plus:
  
     1. Connect to the target database with SQL*Plus. For example, enter:
  
        % sqlplus 'SYS/oracle@trgt AS SYSDBA'
  
     2. Mount the database if it is not already mounted:
  
        SQL> ALTER DATABASE MOUNT;
  
     3. Back up the control file to a trace file:
  
        SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
  
     4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following:
  
        # The following commands will create a new control file and use it
        # to open the database.
        # Data used by the recovery manager will be lost. Additional logs may
        # be required for media recovery of offline data files. Use this
        # only if the current version of all online logs are available.
        STARTUP NOMOUNT
        CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS  ARCHIVELOG
        --  STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED
            MAXLOGFILES 32
            MAXLOGMEMBERS 2
            MAXDATAFILES 32
            MAXINSTANCES 1
            MAXLOGHISTORY 226
        LOGFILE
          GROUP 1 '/oracle/oradata/trgt/redo01.log'  SIZE 25M,
          GROUP 2 '/oracle/oradata/trgt/redo02.log'  SIZE 25M,
          GROUP 3 '/oracle/oradata/trgt/redo03.log'  SIZE 500K
        -- STANDBY LOGFILE
        DATAFILE
          '/oracle/oradata/trgt/system01.dbf',
          '/oracle/oradata/trgt/undotbs01.dbf',
          '/oracle/oradata/trgt/cwmlite01.dbf',
          '/oracle/oradata/trgt/drsys01.dbf',
          '/oracle/oradata/trgt/example01.dbf',
          '/oracle/oradata/trgt/indx01.dbf',
          '/oracle/oradata/trgt/tools01.dbf',
          '/oracle/oradata/trgt/users01.dbf'
        CHARACTER SET WE8DEC
        ;
        # Take files offline to match current control file.
        ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE;
        ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE;
        # Configure RMAN configuration record 1
        VARIABLE RECNO NUMBER;
        EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK
        DEBUG 255');
        # Recovery is required if any of the datafiles are restored backups,
        # or if the last shutdown was not normal or immediate.
        RECOVER DATABASE
        # All logs need archiving and a log switch is needed.
        ALTER SYSTEM ARCHIVE LOG ALL;
        # Database can now be opened normally.
        ALTER DATABASE OPEN;
        # Commands to add tempfiles to temporary tablespaces.
        # Online tempfiles have complete space information.
        # Other tempfiles may require adjustment.
        ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE;
        # End of tempfile additions.
  
     5. Shut down the database:
  
        SHUTDOWN IMMEDIATE
  
     6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database:
  
        STARTUP NOMOUNT
        CREATE CONTROLFILE ...;
        EXECUTE ...;
        RECOVER DATABASE
        ALTER SYSTEM ARCHIVE LOG CURRENT;
        ALTER DATABASE OPEN ...;

  Caution:

        If you do not open with the RESETLOGS option,
   then two copies of an archived redo log for a given log sequence number may
   exist--even though these two copies have completely different contents.
   For example, one log may have been created on the original host and the other on the new host.
   If you accidentally confuse the logs during a media recovery,
   then the database will be corrupted but Oracle and RMAN cannot detect the problem.

  How to open the database without resetlogs?

  This will not help you. You must open the database in resetlogs mode in order to avoid such a scenario. You can open the database in mode restelogs by type
  SQL > alter database open restelogs;
  Instead, he will lose the present trancation in logs online.

  Rgds.