Failed to create new room 400 State.

Similar Questions

• Failed to create new virtual machines on ESXi4.1 due to the error of slot

  Hi people,
  I am unable to create new virtual machines more on ESXi4.1 host due to the error of the slot. Its shows error "number of devices virtual exceeeds the maximum controller. In a cluster, we have 3 host ESXi 4.1.
  Each ESXi is IBM 3850 M2 / x 3950 M2, CPU Cores 24 CPUsx2.665 GHz.Processor Intel Xeon x 7460 @ 2 .66GHz CPU Type

  Please find the attached screenshot. Any help will be much appreciated.

  Thank you
  vmguys

  See http://kb.vmware.com/kb/1016221

• Failed to create new virtual machine

  Hi all

  I have a 5.1 ESXi cluster and I try to install a new Windows Server 2012 R2 virtual machine.

  The process always fails this question:

  "A component of the virtual machine is not accessible on the host computer."

  I tried to:

  • Change datastore (VMFS 3 and 5)
  • Change Vfolder
  • Change the amount of RAM and the number of CPUS
  • I tried disk as Thin provisioned or felt configuration.
  • Check the health of these two hosts: seems OK

  Nothing changes

  Any suggestion?

  Thank you

  Create and manage templates are based on vCenter server only and that's why you see not view 'Virtual Machines and templates' inventory... .and the VM files.

  Instead, you will see all your virtual machines from home-> inventory directly under your host...

  If I install a virtual machine in a host instead of using the Vcenter server, I don't see these files,

  What it means? you have successfully created VM via vSphere client connected to the host?

  So my question is: when the virtual machine is installed, and I reconnect using Vcenter where did I see this virtual machine? I guess that I'm not in the folders 'models and virtual computers '.

  You will see that it is not executed in the title of the last folder in the folder list or in the folder named "Discovered virtual machine"... until you insert it to some... by vCenter

• Failed to create new virtual machines on a new install of Vmware Server2

  We just got a new host, a HP DL980 G7, with hearts 62 x 2 GHz and 512 GB of ram.

  We installed RHEL 5.6 and ran yum update to make it current.

  Installation of Vmware Server 2 and open ports in firewall for 8222/902/8333.

  Created an account vmadm and pointed the VM directory here.

  IM able to connect to the infrastructure of the web and go through the motions of creating a new virtual machine.

  Infrastructure establishes a new directory and the files of the virtual machine.

  However, when I try to start the virtual machine, it just stops after a few seconds.

  I get the following information:

  Description:

  " Message from host: * error internal monitor VMware Server * vcpu - 0:Platform MPN check failed: mpn = 0xefff009Please report this problem by selecting the menu item help > VMware on the Web > request support, or by going to the Web page" http://VMware.com/info?ID=8 & logfile=/DB6/VMS/VM0/VMware%2elog & coreLocation=/DB6/VMS/VM0/VMware%2dcore%5B0%2D1%5D%2egz ". Please provide us with the log file (/ db6/VMs/VM0/vmware.log) and the core files (/ db6/VMs/VM0/vmware-core[0-1].gz). If the problem is reproducible, please set "Logging level" to "Debug" in the Panel of "Miscellaneous" settings of the Virtual Machine. Then reproduce the incident and submit it according to the instructions. To collect the data to submit to the VMware support, select help > topic and click 'collect support data. You can also run the script 'vm-support' in the folder my computer directly. We will respond on the basis of your entitlement to support. Thank you for your feedback-VMware Server team.

  I can't find anything on the server 2 and esx limits can be found here:

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_config_max.PDF

  I don't know what is your experience with this database, but from what I've seen performance problems of database in the virtual machines are usually caused by bad disk i/o. CPU or memory must not be the problem in a virtual machine.

• Cannot create new native thread

  What causes this?
  
  oracle.odi.runtime.agent.invocation.InvocationException: ODI-1274: Agent Exception caused by: failed to create new native thread
  at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:260)
  at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:162)
  at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:129)
  at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java:268)
  at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java:162)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3430)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1491)
  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:32)
  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1595)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1070)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 1.run(DefaultAgentTaskExecutor.java:49)
  at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
  at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor.executeAgentTask(DefaultAgentTaskExecutor.java:41)
  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doExecuteAgentTask(TaskExecutorAgentRequestProcessor.java:92)
  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.process(TaskExecutorAgentRequestProcessor.java:83)
  at oracle.odi.runtime.agent.support.DefaultRuntimeAgent.execute(DefaultRuntimeAgent.java:68)
  at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:445)
  at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:394)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
  at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
  at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216)
  at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
  at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
  at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:417)
  at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
  at org.mortbay.jetty.Server.handle(Server.java:326)
  at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
  to org.mortbay.jetty.HttpConnection$ RequestHandler.content (HttpConnection.java:879)
  at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)
  at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:218)
  at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
  to org.mortbay.jetty.bio.SocketConnector$ Connection.run (SocketConnector.java:228)
  to org.mortbay.thread.QueuedThreadPool$ PoolThread.run (QueuedThreadPool.java:520)

  Please check in the Metalink if you can find a solution for this issue.
  If you want to dig deeper enable agent tracing and capture more detailed logs and see if that helps.

• Failed to create room (PHP)

  Im trying to create a piece using the low-COST airlines PHP API.

  When I call the createRoom function, I get the following error:

  Warning : fopen (https://na2.collaboration.adobelivecycle.com:443 / darkbearroom) [function.fopen]: failed to open stream: HTTP request failed! HTTP/1.1 401 Unauthorized to/home/content/t/h/u/thung/html/classroom/lccs.php online 837

  the page I'm using is here:

  http://antoniohung.com/classroom/

  Here is the source:

  <? PHP

  require_once ("LCCS.php");

  $title = 'LCC external authentication Sample ";

  ini_set ("display_errors", 1);

  #

  # Enter your credentials below:

  #

  $devuser = "";

  $devpass = "";

  $secret = "";

  $am = new RTCAccount ("http://collaboration.adobelivecycle.com/darkbearroom");

  $am-> login ($devuser, $devpass);

  try {}

  $room_array = $am-> listRooms();

  echo 'Print Rooms. "\n";

  print_r ($room_array);

  $newRoom = $am-> createRoom ("aroom");

  echo "create room". "\n";

  print_r ($newRoom);

  } catch (Exception $ex) {}

  print_r ($ex);

  "exit";

  }

  ? >

  I am able to enumerate all the pieces using the listRooms() function, but I can't create the room.

  Any help would be appricated

  Just find a simple solution for me...  I changed the line 291 of

  $date. = "& {$this-> authToken};

  TO

  $data. = "& {$this-> authToken};

  I was getting an error daying undefined variable date...  Fixed my problem for me...

  Thank you

• WARNING 20225. Adobe Acrobat7.0 failed to create a new item. Adobe PDF Port / printer. The Adobe PDF printer may be unavailable.

  Try installing Adobe Acrobat Version 7.0 on a new PC running Windows 7. Get the error message-

  "Attention 20225. Adobe Acrobat7.0 failed to create a new item. Adobe PDF Port / printer. The Adobe PDF printer may be unavailable."

  any help appreciated

  On behalf of Adobe, no version of Acrobat before 8.1 is completely installable or useable on any version of Windows beyond Windows XP. There are fundamental differences in the way that the Adobe PDF printer is installed and accessible on later (1) Windows Vista and/or (2) 64 - bit versions of Windows. In addition, Acrobat 7 coordinates with all recent versions of all Microsoft Office applications. You need Acrobat DC licenses at this stage.

  -Dov

• Failed to create or open the new (existing) file

  I can't create or open the new (existing) file or new model is just do ' t do anything. I have to stop using the Task Manager.

  Microwoft WIndows 10 x 64 Insider Preview Build 14361, 6 GB RAM, Intel Core i3.

  I tried to restart my laptop, reinstall Illustrator, run as administrator, that it helped me. Adobe Illustrator CC 2015 19.0.0 (64-bit). I don't know what's happened, he worked several times before, but now... Help, please!

  Disable the GPU performance helped me, now I can open or create new files, but now my computer is incredibly slow opening Illustrator.

  P.S. Oh my... I just activate Windows Defender and now everything works normally

• ORA-19506: failed to create the file for sequential access

  Hello, log backup archive My RMAN is a failure... Here is the info from the full log file. Can someone please shed some light on this...
  
  
  Recovery Manager: release 10.2.0.3.0 - Production on the game 17 Dec 09:00:02 2009
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  RMAN >
  connected to target database: INVENT (DBID = 12345667)
  
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 >
  using the control file of the target instead of recovery catalog database
  allocated channel: t1
  channel t1: sid = 959 devtype = SBT_TAPE
  channel t1: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
  
  allocated channel: t2
  channel t2: sid = 962 devtype = SBT_TAPE
  channel t2: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
  
  executing command: SET ORDER ID
  
  SQL statement: alter system archive log current
  
  From backup 17 December 09
  Current archived log
  channel t1: from archive newspaper backupset
  channel t1: specification of archive log backup set
  archive log entry thread = 1 = recid 61859 46634 = 705760770 stamp = sequence
  archive log entry thread = 1 sequence = recid 61860 = 46635 = 705762477 stamp
  archive log entry thread = 1 = recid 61861 46636 = 705765886 stamp = sequence
  archive log entry thread = 1 = recid 61862 46637 = 705767598 stamp = sequence
  archive log entry thread = 1 sequence = 61863 recid = stamp 46638 = 705769235
  archive log entry thread = 1 sequence = 61864 recid = 46639 stamp = 705769236
  archive log entry thread = 1 = recid 61865 46640 = 705773535 stamp = sequence
  channel t1: starting piece 1 to 17 December 09
  channel t2: from archive newspaper backupset
  channel t2: specification of archive log backup set
  archive log entry thread = 1 sequence 61866 recid = 46641 = 705774395 stamp =
  archive log entry thread = 1 = recid 61867 46642 = 705775744 stamp = sequence
  archive log entry thread = 1 = recid 61868 46643 = 705776075 stamp = sequence
  archive log entry thread = 1 = recid 61869 46644 = 705783627 stamp = sequence
  archive log entry thread = 1 = recid 61870 46645 = 705783628 stamp = sequence
  archive log entry thread = 1 = recid 61871 46646 = 705787215 stamp = sequence
  archive log entry thread = 1 sequence = recid 61872 stamp 46647-= 705787215 =
  archive log entry thread = 1 = recid 61873 46648 = 705804999 stamp = sequence
  archive log entry thread = 1 sequence = 61874 recid = stamp 46649 = 705834020
  channel t2: from room 1 to 17 December 09
  RMAN-03009: failure of the backup command on channel t2 at 2009-12-17 09:01:38
  «"ORA-19506: failed to create the batch file, name ="7bl14b16_1_1", parms ="»
  ORA-27028: skgfqcre: sbtbackup returned the error
  ORA-19511: error received from layer media manager, error text:
  VxBSACreateObject: Failed with the error:
  Server status: could not allocate new media for backup, storage unit has no available
  T2 channel disabled, job failed on it will run on another channel
  output channel: t1
  output channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on channel t1 at 2009-12-17 09:02:43
  «"ORA-19506: failed to create the batch file, name ="7al14b16_1_1", parms ="»
  ORA-27028: skgfqcre: sbtbackup returned the error
  ORA-19511: error received from layer media manager, error text:
  VxBSACreateObject: Failed with the error:
  Server status: could not allocate new media for backup, storage unit has no available
  
  RMAN >
  
  Complete recovery manager.

  It's all about media layer. You may need to ask Veritas netbackup admin to fix the problem and resubmit the backup after that.

• Change a vNIC model by adding a new VLAN (400)

  Hello:

  I have a Cisco UCS B200 M2, UCSM 2.2 (3rd).  I just created a new vlan 400 (BKP_192.168.6.0). When I proceed to change the vNIC models to add newly created virtual LAN 400, I receive the following warning message:

  Change the VLAN

  Your change:

  Create: network Vlan_BKP_192.168.6.0 (org-root/lan-conn-templ-DOL-prodA/if-Vlan_BKP_192.168.6.0)

  It will take recognition user before restarting of:

  See ESX-03 service profile (org-root/ls-ESX-03) [Server:sys/chassis-1/blade-3]

  See ESX-04 service profile (org-root/ls-ESX-04) [Server:sys/chassis/Blade 2-1]

  See ESX-05 service profile (org-root/ls-ESX-05) [Server:sys/chassis/Blade 2-2]

  See ESX-01 service profile (org-root/ls-ESX-01) [Server:sys/chassis/blade 1-1]

  Are you sure you want to apply the changes?

  PRES Yes to ignore the warning and submit changes, then exit

  or Cancel changes to the current configuration

  I found in a forum, after a google search, when I change a vNIC model adding a vlan is a task which are not requires a restart of the host/blades.

  In this case, how can I managed to add the new vlan in the vNIC models? I have a total of 40 production VMware virtual servers distributed in these 4 hosts/blades.

  Please refer to the attached form for more information

  Thank you

  Miguel Figueroa

  Hello

  INFO] [0xab9e8b90] [Sep 10 12:58:50.728] [ls:analyzeConfig] bindingChange 0, hostEthIfChange 0, hostEthIfProfileChange 0, hostEthIfQosChange 0, hostEthIfQosHostControlChange 0, hostEthIfNwCtrlChange 0, hostEthIfProfileRedeployRequired 0, hostFcIfChange 0, hostFcIfProfileRedeployRequired 0, hostFcIfPersChange 0, hostFcIfProfileChange 0, hostFcIfQosChange 0, hostFcoeIfChange 0, hostIfPCIeChange 0, vifChange 0, vlanChange 1, vsanChange 0, ipChange 0, bootOrderChange 0, biosProfileChange 0, bladeIdentityChange 0, agentPolicyChange 0, biosFwChange 0, storageControllerFwChange 0, adaptorHostFwChange 0, adaptorNwFwChange 0, mgmtControllerFwChange 0 , localDiskPolicyChange 0, pinChange 0, solChange 0, flexFlashConfigChange 1, cimcVmediaConfigChange 0, epAuthChange 1, bootVnicChange 0, bootPXEChange 0, boardCtrlFwChange 0, errInsufficientResources 0, LocalDiskFwChange 1, pnuosConfig 1, rebootRequired 1, ConfigRename 0, FcZoneChange 0, failed to 0.

  Notice the elements with a 1 next to them. The servers want to restart for:

  flexFlashConfigChange 1

  LocalDiskFwChange 1

  You can also see your change VLAN pending:

  vlanChange 1

  I hope this helps.

  Justin

• I can not create new folders. And then I discovered that I have more problems.

  I can not create new folders.   So, I tried to create a restore point, and who do not also have. He said that the restoration of the system did not completely & system files and settings were not changed.  Details: System Restore could not access a file.  It's probably because an antivirus program is running.  So I have disabled all programs and I still got the same message when I tried to use system restore.  I tried the SFC scan.  The scan SFC says he found no violation of integrity.  I could not create a new user, because it says that the user profile service does not log on.  Failed to load the user profile.  So I am totally confused. I recently followed the instructions on your site, to create a new Normal template as mine has been altered.  That worked very well, but all of a sudden, no new files cannot be created.

  Hi Sara,.

  I suggest you follow the steps provided by Linda Yan dated from Monday, May 24, 2010 08:38 , the following link and check if it helps.

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf

  Registry warning: back up the registry

  Please update us with the State of the question and we will be happy to help you.

• Failed to create index with imdp

  I am trying to import an image with the following command:

  Impdp user/pass DIRECTORY = SCHEMAS DUMPFILE = fump.dmp = originally_schema REMAP_SCHEMA = originally_schema:new_schema TABLE_EXISTS_ACTION = DATA_PUMP_DIR replace old = REMAP_TABLESPACE: new

  I don't know how the dump has been exported.

  Source DB version: 11.2.0.4

  Destination DB version: 11.2.0.1

  Everything works fine until it comes to the creation of index:

  Processing object type SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX

  ORA-39083: Type what INDEX failed to create object error:

  ORA-06550: line 2, column 1:

  PLS-00306: wrong number or types of arguments in the call to "CREATE_INDEX.

  ORA-06550: line 2, column 1:

  PL/SQL: Statement ignored

  Because sql is:

  BEGIN

  ctxsys.driimp.create_index('I_SRC_NAME','SOURCES',User,'ID','2','NAME','1','1020','32','8130','33',, NULL, NULL, 0,'Y','ON COMMIT','12582912',, NULL, null);

  ctxsys.driimp.set_object('DATASTORE','DIRECT_DATASTORE',0);

  ctxsys.driimp.set_object ('TYPE ',' CHAR_)

  Hope you can help me.

  & then you cannot use V11.2.0.4 expdp use impdp since V11.2.0.1

  expdp should include VERSION = 11.2.0.1

• Any way to create a room for discussion with using Hello Messages?

  I was playing around with Messages today for a bit. I want to create a room for group discussion for our studio for specific projects. I guess it's impossible to do a Hello chat room? Anyone know if this is possible? Thank you!

  Hello

  Despite Hello be there since iChat 1 (before there was even video) conversations in group for some reason never did any.

  In theory, it should be possible because it uses the same subroutines and the AIM and Jabber accounts.

  You used to be able to drag several Hello Buddies on the same cat and it would become a group.

  This does not seem possible in the Messages she believes still dragging a buddy from the list of friends in the main Chat window starts a new Cat.

  It is also difficult to add the name of Hello to the Contacts app address card so you can use it.

  

  20:55 Monday; December 21, 2015

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• Programmatically create new consumers in a MANUAL

  Howdy, I am struggling with a concept for an installation of BAU.  Say I have a main VI consisting of one producer and single consumer sharing a queue, which can be filled in entries/actions of the main front of the VI.  Convening of reentrant under reference screw consumers live each of them open their own front panels and run their own QMD, or other machine state until closed by the user.  It occupies the main VI consumers until the responsible VI is closed, as consumers waited for the release of the call by the reference node, even if the called VI have not may not be output.  So the main VI would be able to queue more elements, but these elements would not be executed until execution of the first element is complete (the called VI), and an additional contribution of the façade of the main VI not would not be executed as long as the new face before a was closed.

  To resolve this problem, I thought adding more consumers (with the same subsidiary screws) to the same producer, creating new queues for each consumer, and then when a new item is added to the structure of the event in the producer, he wondered each queue looking for a queue (and thus a consumer) that contains zero element in queue and adds the new queues.  This should ensure that in case of more great events of façade VI, they would run even with another open front.

  But this means I can have only as many windows open as I do in my VI main consumers.  My question is, is it possible to call a VI so that it does not occupy the while loop containing his appeal through the reference node until the front panel of the VI called is closed?

  Thank you in advance!

  Also I just tried it. Setting of the façade open when a property called on a VI is not enough. You must explicitly open it with an invoke node. And you must specify the reference open VI it is reentrant, even if you have the reentrant VI properties.

  

• Lookout 6.5 cannot create new Windows 7 user accounts

  Hello

  I use Lookout 6.5 (Build 49153) on a 64-bit Windows 7 computer. I also installed it on my development machine that is also running Windows 7 64 bit. On both machines I can't create new accounts of users at Lookout. I get an error that says:

  Add user operation failed. Check the system drive disk space.

  There are a lot of free space on the hard disk, so this isn't the problem. I am connected to Lookout and Windows administrator is connected under the administrator account. I'm guessing that there may be a security issue with Windows 7. I tried to adjust UAC in Windows disabled, but it did not help.

  I can't add a password for the default Administrator account to Lookout. I get the following error:

  Could not change the properties of that user.

  I really need to solve this problem as soon as POSSIBLE because operators are required to use the Administrator without password account to make the system work, so that they have way more rights that they need and can enter edit mode and really cause some damage. Thanks for any help you can give me.

  Thank you

  Rob Miller

  Try to run the lookout in XP compatibility mode. Right-click on lookout.exe and open its property, it is on the Compatibility tab.