Failed to get site - site VPN to the top
I have two PIX runing version 6.3 (3) and 7.1 (1). Here's my topology and attached config showing running configuration and debugs.
(PC)172.16.10.10/24<-->172.16.10.1/24-PIX(6.3)--1.1.1.2/30---WAN(X-Over cable)---1.1.1.1/30--PIX (7.1)--10.10.10.1/24<--->10.10.10.10/24(PC)
What Miss me?
Thank you
Moreover, it is the only thing that catches my attention from the 6.3 debugs you provided:
ISAKMP (0): ITS been pre-shared key, using id ID_FQDN type authentication
One thing you can try is to put both sides ISAKMP identities:
address of ISAKMP identity (side 6.3)
cry isakmp identity address (on the side of 7.x)
--->-->
Tags: Cisco Security
Similar Questions
-
Catalyst business plan of the site? Make your Web site appear at the top?
Hello
I'm relatively new to web hosting features and so on. I created my own personal site through Adobe Muse ashleysimonetto.com.
However, when I search my site through Google and other search engines, it is not at the top?
In fact it seems not at all. Instead, other sites that are related to my name, such as instagram, behance etc. appear.
I was wondering if there are see a way for search engines to make my website appear in the upper part of research, so that's the first thing users.
Only, I published my site a day there if it makes a difference.
Is this related to site maps? If yes how can I modify/use them
Thank you!
Ashley
There is a lot more that goes into your site listed in the top - and it's never a guarantee that it will never be. The more busy, well-established links will be generally always first.
It can also take weeks so he can appear on search engines at all.
SEO (Search Engine Optimization) is a science in itself. I suggest you do a lot of research on SEO, because this isn't really a question of Muse. If you are hosting on Business Catalyst, I strongly recommend a company called Business Catalyst SEO managed by Web Sirocco to Business Catalyst SEO for BC Sites and partners ... I've used them myself and regarding the optimization of BC sites, they are the best in the business, in my opinion.
-
Get annoying action ads at the top of the Yahoo home page. I always use Firefox and haven't changed the settings, then why the big announcements? I know that they are put there by Yahoo, but they were not there before and they aren't there when I open Yahoo with Explorer.
Install adblock more with subscription easylist and check
-
My screen suddenly upside down. How can I get that back right to the top?
My screen suddenly upside down. How can I get that back right to the top?
High graphics most of range, the cards are equipped with display rotation built in and adjustable via display properties or via the display properties of the display icon in the Notification area (to the left of the system clock). It is a nice feature if you want to read things more like a book on your laptop, etc.
Some examples would be ATI, NVIDIA, Intel, Matrox, S3, XGI... These adapters can be integrated into your system, and not always his own card.
This phenomenon of rotation screen sometimes inadvertently some keystrokes (the cat walked on my keyboard).
Pressing on the keys Ctrl-Alt top/arrow down arrow rotates screen 90 degrees at a time for some graphics (like NVIDIA) cards
If this does not work, we will need to know your system brand and model and see if we can look at the rotating screen for you shortcut keys.
Do, or do not. There is no test.
I decided to implement the points for a new puppy instead of a pony!
-
For no reason that I can see on Firefox in the upper right corner, the bookmark has disappeared, and on the upper left tab, the tab Web sites visited more often. There is simply nothing. I can always go to the bottom of the page to navigate, but it is most cumbersom and loses all the advantages of a single click, I had. My computer is an intel windows Vista.
Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.
- Firefox menu button > Options
- View > toolbars (press F10 to display the menu bar)
- right click on empty toolbar space
- If the missing elements in the palette of the toolbar, and then drag them to the window customize (view > toolbars > customize) on the toolbar
- If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar set up
Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).
If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key. -
877W customer VPN to the top, but no traffic
Hi guru of cisco
Help me please to solve the problem of traffic of VPN client. I am able to connect to cisco, but failed to get a network, except the router access.
I also want to block all P2P traffic except 1 IP 192.168.10.7.
Thank you
He is out of #show cry ipsec his
Interface: virtual-Access4
Tag crypto map: addr virtual-Access4-head-0, local a.a.a.aprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.10.251/255.255.255.255/0/0)
current_peer b.b.b.b port 56604
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 26, #pkts decrypt: 26, #pkts check: 26
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors-More - local crypto endpt. : a.a.a.a, remote Start crypto. : b.b.b.b
-More - path mtu 1500, mtu 1500 ip, ip mtu IDB virtual-Access4
-More - spi outgoing current: 0 x 66870874 (1720125556)
-More-
-More - esp sas on arrival:
-More - spi: 0xBDA0E6DE (3181438686)
-More - transform: esp-3des esp-sha-hmac.
-Other - running parameters = {Tunnel,}
-More - conn id: 369, flow_id: Motorola SEC 1.0:369, card crypto: Virtual-Access4-head-0
-More calendar - its: service life remaining (k/s) key: (4543855/3494)
-More size - IV: 8 bytes
-More - support for replay detection: Y
-Other - status: ACTIVE
-More-
-Other - arrival ah sas:
-More-
-More - CFP sas on arrival:
-More-
-More - outgoing esp sas:
-More - spi: 0 x 66870874 (1720125556)
-More - transform: esp-3des esp-sha-hmac.
-Other - running parameters = {Tunnel,}
-More - conn id: 370, flow_id: Motorola SEC 1.0:370, card crypto: Virtual-Access4-head-0
-More calendar - its: service life remaining (k/s) key: (4543859/3494)
-More size - IV: 8 bytes
-More - support for replay detection: Y
-Other - status: ACTIVE
-More-
-More - out ah sas:
-More-
-More - out CFP sas:And the config of the router:
version 12.4
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
sequence numbers service
No dhcp service
!
router host name
!
boot-start-marker
boot-end-marker
!
Security of authentication failure rate 3 log
logging buffered 52000
recording console critical
enable secret 5
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authentication login ciscocp_vpn_xauth_ml_2 local
AAA of authentication ppp default local
AAA authorization exec default local
AAA authorization network default authenticated if
AAA authorization ciscocp_vpn_group_ml_1 LAN
AAA authorization network if authenticated local_auth
AAA authorization ciscocp_vpn_group_ml_2 LAN
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint TP-self-signed-1933852417
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1933852417
revocation checking no
rsakeypair TP-self-signed-1933852417
!
!
TP-self-signed-1933852417 crypto pki certificate chain
certificate self-signed 01
30820252 308201BB A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31393333 38353234 6174652D 3137301E 170 3130 30383137 31323438
31365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 39333338 65642D
35323431 3730819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100C0D8 05ECA4BC 68540261 576BAD7D 23F29679 B60A7B38 35211BCF 78F2271C
2FDB24CC B 949640, 9 D68C9308 58BAAB0A 5FBD8123 42 12922 F2AE7C93 6EF24910
AD777AB3 DD923F06 CB6B6106 9C08AA81 E7CEB073 1F6BC114 B0B1756D ECF976CC
C0073FB2 2C056FD9 7F361152 0DCB08C4 3EA559F5 575EF2F4 1A5FD373 552348B 0
010001A 3 7 509F0203 HAS 1 130101 FF040530 030101FF 30250603 307830 0F060355
551D 1104 1E301C82 1A6A6572 6963686F 2 D 727472 72696368 6F2E636F 312E6A65
2E6E7A30 1 230418 30168014 E1FAAC42 678187 3 D2BFEF05 6F70C504 1F060355
00D12F67 301D 0603 551D0E04 160414E1 FAAC426F 678187 2 BFEF0500 70C5043D
D12F6730 0D06092A 864886F7 0D DFC4C826 E8C4CD12 010104 05000381 8100A 630
4D8C4BB8 B9928B43 4C8B91A2 F6A400B5 97EB0BF7 7ACFE10A BA90056B 6E34FE2F
DAC133EC F0E847DD A7AA6B78 C01AE543 597E7149 85 HAS 17614 EEFEFF4B 076E1758
44A250D9 3DE2EF88 63233AF0 7D2DD2BD 1221D59C 0731CFE3 26B31F88 13F48ACC
ED2972C5 FCCF6D43 681BF350 CE01C5E9 41E9705A CJF
quit smoking
dot11 syslog
!
dot11 WIFI ssid
open authentication
authentication wpa key management
Comments-mode
ascii secret 7 WPA - psk
!
no ip source route
IP cef
!
!
!
!
no ip bootp Server
no ip domain search
IP domain name of domain
Server dhcp IP 192.168.10.10
!
Authenticated MultiLink bundle-name Panel
VPDN enable
!
VPDN-Group 1
! Default L2TP VPDN group
accept-dialin
L2tp Protocol
virtual-model 1
receive window 256-tunnel L2TP
!
aes encryption password
!
!
username admin privilege 15 very secret 5 secret
username privilege 15 7 n1ck passes
!
!
crypto ISAKMP policy 1
preshared authentication
!
crypto ISAKMP policy 2
preshared authentication
!
crypto ISAKMP policy 3
preshared authentication
!
crypto ISAKMP policy 4
BA 3des
md5 hash
preshared authentication
Group 2
life 3600
crypto ISAKMP key 6 key address c.c.c.c
invalid-spi-recovery crypto ISAKMP
ISAKMP crypto nat keepalive 10
!
Configuration group customer isakmp crypto EasyVPN
key 6 key
DNS 192.168.10.10
domain domain
pool SDM_POOL_1
ACL 100
Save-password
include-local-lan
Max-users 2
netmask 255.255.255.0
!
Configuration group customer crypto isakmp ASA
key 6 key
pool SDM_POOL_1
Firewall are u there
include-local-lan
PFS
Max-users 2
Max-Connections 1
netmask 255.255.255.0
!
ISAKMP crypto group configuration of VPN client
key 6 key
DIAL-IN pool
ACL 103
include-local-lan
Max-users 2
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
Group of EasyVPN identity match
match of group identity ASA
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
Crypto isakmp CiscoCP_Profile2-ike-profile-1 profile
identity VPN group match
client authentication list ciscocp_vpn_xauth_ml_2
ISAKMP authorization list ciscocp_vpn_group_ml_2
client configuration address respond
virtual-model 5
!
!
Crypto ipsec transform-set esp - esp-sha-hmac ASA-IPSEC
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
Crypto ipsec transform-set esp-SHA2-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
security-association value 900 idle time
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
Profile of crypto ipsec CiscoCP_Profile2
Set the security association idle time 1200
game of transformation-ESP-3DES-SHA1
set of isakmp - profile CiscoCP_Profile2-ike-profile-1
!
!
map SDM_CMAP_1 2 ipsec-isakmp crypto
the value of c.c.c.c peer
game of transformation-ASA-IPSEC
match address 160
!
Crypto ctcp
Archives
The config log
hidekeys
!
!
synwait-time of tcp IP 10
!
class-map match-all P2P
Description speed limit P2P
match the edonkey Protocol
bittorrent Protocol game
fasttrack Protocol game
gnutella Protocol game
match Protocol kazaa2
class-map correspondence-any BLOCK
match Protocol kazaa2
bittorrent Protocol game
match the edonkey Protocol
gnutella Protocol game
fasttrack Protocol game
!
!
Policy-map BLOCK_INTERNET
class BLOCK
bandwidth 8
!
!
Bridge IRB
!
!
interface Loopback0
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
!
Null0 interface
no ip unreachable
!
ATM0 interface
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
No atm ilmi-keepalive
DSL-automatic operation mode
!
point-to-point interface ATM0.1
Description $ES_WAN$
no ip redirection
no ip unreachable
no ip proxy-arp
PVC 0/100
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
switchport mode trunk
!
interface FastEthernet3
!
interface virtual-Template1
Description $FW_INSIDE$
BVI1 IP unnumbered
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
route IP cache flow
peer default ip address dhcp
PPP mppe auto encryption required
ms-chap-v2, ms-chap PPP authentication PAP
!
interface virtual-Template2
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
!
type of interface virtual-Template3 tunnel
Description $FW_INSIDE$
Unnumbered IP Dialer0
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
tunnel type of interface virtual-table 5
Description $FW_INSIDE$
BVI1 IP unnumbered
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile2 ipsec protection profile
!
interface Dot11Radio0
no ip address
penetration of the IP stream
route IP cache flow
!
algorithms for encryption tkip encryption mode
!
SSID WIFI
!
Speed basic - 1.0 basic - 2.0 basic - 5.5 Basic6.0 basic - 9.0 basic-11, 0-12, 0-basic basic-18, 0 24 basic, basic 0-36, 0 48 basic, basic 0-54, 0
root of station-role
No cdp enable
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface Vlan1
no ip address
IP nat inside
IP virtual-reassembly
Bridge-Group 1
Bridge-Group 1 covering-disabled people
!
interface Vlan2
Description $FW_INSIDE$
IP 192.168.11.254 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
!
interface Dialer0
Description $OUTSIDE$ $FW_OUTSIDE$
the negotiated IP address
IP access-group sdm_dialer0_in in
IP access-group 101 out
no ip redirection
no ip unreachable
no ip proxy-arp
NBAR IP protocol discovery
NAT outside IP
IP virtual-reassembly
encapsulation ppp
route IP cache flow
Dialer pool 1
Dialer-Group 1
PPP pap sent-name of user username 7 password password
PPP ipcp dns request
failure to track PPP ipcp
map SDM_CMAP_1 crypto
out of service-policy BLOCK_INTERNET
!
interface Dialer1
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
!
interface BVI1
Description $FW_INSIDE$
IP address 192.168.10.254 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
NBAR IP protocol discovery
IP nat inside
IP virtual-reassembly
route IP cache flow
!
local IP DIAL-IN 192.168.10.251 pool 192.168.10.253
local IP SDM_POOL_1 192.168.10.50 pool 192.168.10.51
no ip classless
IP forward-Protocol ND
!
IP flow-cache timeout active 1
The Dot11Radio0 flow-export source IP
IP flow-export version 9
192.168.10.200 IP flow-export destination 9996
!
IP http server
local IP http authentication
IP http secure server
The dns server IP
IP nat inside source static tcp 192.168.10.19 443 Dialer0 443 interface
IP nat inside source static tcp 192.168.10.8 Dialer0 5900 5900 interface
IP nat inside source udp static a.a.a.a 500 Dialer0 500 interface
IP nat inside source static tcp 192.168.10.130 9090 interface Dialer0 9090
overload of IP nat inside source list NAT_INTERNET interface Dialer0
IP nat inside source udp static a.a.a.a 4500 Dialer0 4500 interface
IP nat inside source static tcp 192.168.10.9 1723 1723 Dialer0 interface
IP nat inside source static udp 192.168.10.150 514 interface Dialer0 514
IP nat inside source static tcp 192.168.10.150 Dialer0 1468 1468 interface
!
NAT_INTERNET extended IP access list
deny ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
deny ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
permit ip 192.168.10.0 0.0.0.255 any
NAT_INTERNET_1 extended IP access list
deny ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
permit ip 192.168.10.0 0.0.0.255 any
sdm_dialer0_in extended IP access list
Note the category CCP_ACL = 1
enable ahp c.c.c.c one host
Note allow all
allow an ip
allow a host c.c.c.c esp
permit any isakmp udp host c.c.c.c eq
all eq non500-isakmp udp host c.c.c.c permit
enable ahp c.c.c.c one host
allow a host c.c.c.c esp
IP 192.168.17.0 allow 0.0.0.255 192.168.10.0 0.0.0.255
ip permit 192.168.1.0 0.0.0.255 192.168.10.0 0.0.0.255
refuse the host ip 209.239.31.195 no matter what paper
refuse the host ip 98.108.59.171 no matter what paper
!
recording of debug trap
logging 192.168.10.150
Note access-list 1 #NAT INTERNET USERS.
access-list 1 permit 192.168.10.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
access-list 100 permit ip 192.168.10.0 host everything
Note access-list 101 RULES for FW to the INTERNET
access-list 101 deny ip no matter what newspaper to host 121.22.6.121
access-list 101 deny ip no matter what newspaper to host 74.120.10.51
access-list 101 deny ip no matter what newspaper to host 112.230.192.99
access-list 101 deny ip no matter what newspaper to host 61.55.167.19
access list 101 ip allow a whole
access-list 101 deny ip 192.168.10.0 0.0.0.255 192.168.0.0 0.0.255.255
access-list 101 permit ip 192.168.17.0 0.0.0.255 any
Note access-list 101 Cisco_VPN_10000
access-list 101 permit tcp 119.224.0.0 0.0.255.255 connect any EQ 10000
Note access-list 101 Cisco_VPN_500
access-list 101 permit udp any any eq non500-isakmp log
Note access-list 101 Cisco_VPN_4500
access-list 101 permit udp any any eq isakmp newspaper
access-list 101 permit tcp any host a.a.a.a eq 81
access-list 101 deny ip 127.0.0.0 0.255.255.255 everything
access-list 101 deny ip 169.254.0.0 0.0.255.255 everything
access-list 101 deny ip 172.16.0.0 0.15.255.255 all
access-list 101 deny ip 192.0.2.0 0.0.0.255 any
access-list 101 deny ip 198.18.0.0 0.1.255.255 all
access-list 101 deny ip 224.0.0.0 0.15.255.255 all
Note access-list 101 OWA
access-list 101 permit tcp any any eq 443 newspaper
Note access-list 101 port VNC
access-list 101 permit tcp 119.224.0.0 0.0.255.255 connect any EQ 5900
Note access-list 101 service CRM 8081
access-list 101 permit tcp any any eq 8081 newspaper
Note access-list 101 Syslog to ASA1
access-list 101 permit udp host c.c.c.c eq syslog all eq syslog
Note access-list 101 Syslog for ASA2
access-list 101 permit udp any any eq syslog
access-list 102 tcp refuse any any eq 445 newspaper
Note access-list 103 CCP_ACL category = 4
access-list 103 permit ip 192.168.10.0 0.0.0.255 any
Note access-list 115 CCP_ACL category = 16
access-list 115 permit ip 192.168.10.0 0.0.0.255 192.168.0.0 0.0.255.255
access-list 120 permit ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
access-list 130 refuse ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
access-list 130 allow ip 129.168.10.0 0.0.0.255 any
access-list 130 permit ip 192.168.10.0 0.0.0.255 any
access-list 140 permit ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 150 deny ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 150 deny ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 any
access-list 160 permit ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
access-list 160 permit ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
Server SNMP ifindex persist
not run cdp
!
!
!
sheep allowed 10 route map
corresponds to the IP 150
!
!
control plan
!!
Line con 0
no activation of the modem
line to 0
line vty 0 4
password password 7
authentication of the local connection
!
max-task-time 5000 Planner
Scheduler allocate 4000 1000
Scheduler interval 500
end1. use a "pool of ip" vpn client in a subnet that does not overlap with any of your internal network.
Currently two IP pools are overlapping with subnet of the interface BVI1.
2. ensure that VPN traffic is bypassed by NAT.
-
Laptop of my mother with all his important files on it is not start. As soon as it turns on, it basically goes to a black screen with a cursor flashing at the top. I tried the instructions here to use the windows recovery image to join the reactive BACK and run the commands provided in fixboot back... but they do not work. The computer is a laptop Nr G56-125 only about a year, the operating system is Windows 7 Premium 64-bit. I tried also to restore system but get the same when put on
Hello:
You tried to access the recovery from the repair CD image you did and it did not work?
If you can not get anything to work, then I of workaround that you can use to get W7 back there.
If you let just install without delete and format the drive when Windows installs, it will create a windows.old folder and you can get the files from your mother from the windows.old folder. Also in the windows.old folder, there should be a SWSetup folder. That the folder contains the major part of the program and the installation files of the driver that came with the PC. Copy this folder off the coast for more security and use it to reinstall all the programs supplied with the PC that you want to get back out there.
Here is the workaround...
If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.
Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.
Use 25 characters on the PC product key to activate the installation.
The key will activate a 32 or 64 bit installation.
Then go to the support of the PC and driver page to install the drivers you need.
Link to downloads ISO of W7 is below.
http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/
Paul
-
Hello
I'm completely up to date with CC 2015 and all my applications. CC does not start. When I run CC, I get a grey-out icon in the top bar for a moment and then disappears. Double-click on the application of CC causes it to appear greyed out for only a moment. Too much. I deleted the data OOBE folder. No help. I have repaired permissions. No help. I secured started. No help. I have reset the PRAM. No help.
I continue to receive notifications to open the Adobe updater but that does not do anything. If I try to re - install CC, it initializes the installer but dies right there. The activity monitor shows that creative cloud does NOT run.
I am 10.10.4 running on my Mac. Any ideas?
Bill
Well, it seems that there are some problems with permissions on your account.
Go back to your regular account and please try the following steps:
1. uninstall the application Adobe CC of the machine (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)
2 set the "Read and write" permissions on the files of Adobe for all users in the following locations:
a. / Library/Application Support /.
(b) /Users/ [user name] / Library/Application Support /.
3. restart the computer.
4. install the application Adobe CC (Creative Cloud help |) Creative cloud for office)
-
PIX from site to site VPN at the Juniper
Hello world
have a problem with the vpn site to site configuration beetween cisco pix and juniper firewall.
When I entered the command "show isakmp crypto its" Cisco Pix console displays the following status:
State
OAK_CONF_ADDR
But I don't know what it means that State
or what is the problem?.
l think my setup is corret.
I also have VPN clients configured on the network, and they run correctly.
can someone help me! Plase...
Thanks a lot. = D
If phase 1 is completed successfully, you will see QM_IDLE in "isakmp crypto to show his". Therefore, this suggests a problem of phase 1 - orders «isakmp...» ».
Check the policy, check the pre-shared key.
"CONF_ADDR" gives to think that one end looking for mode config (address IP etc) with the other.
See line «isakmp key...» « a »... No.-xauth No.-config-mode"at the end.
-
Site to site VPN with the VPN Client for both sites access?
Current situation:
Scenario is remote to the main office. Site IPSEC tunnel site (netscreen) remote in hand (506th pix). Cisco VPN Client of main office of remote access to users.
It's that everything works perfectly.
Problem:
Now we want remote users who connect to the seat to also be able to access resources in the remote offices.
This seems like it would be easy to implement, but I can't understand it.
Thanks in advance.
Rollo
----------
#10.10.10.0 = Network1
#10.10.11.0 = Network2
#172.16.1.0 = vpn pool
6.3 (4) version PIX
access-list 101 permit ip 10.10.10.0 255.255.255.0 172.16.1.0 255.255.255.0
access-list 101 permit ip 10.10.10.0 255.255.255.0 10.10.11.0 255.255.255.0
splitTunnel 10.10.10.0 ip access list allow 255.255.255.0 any
splitTunnel ip 10.10.11.0 access list allow 255.255.255.0 any
access-list 115 permit ip any 172.16.1.0 255.255.255.0
access-list 116 allow ip 10.10.10.0 255.255.255.0 10.10.11.0 255.255.255.0
IP access-list 116 allow all 10.10.11.0 255.255.255.0
access-list 116 allow ip 10.10.11.0 255.255.255.0 10.10.10.0 255.255.255.0
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
IP address outside 209.x.x.x 255.255.255.224
IP address inside 10.10.10.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool 172.16.1.0 vpnpool - 172.16.1.50
Global 1 interface (outside)
Global (outside) 10 209.x.x.x 255.255.255.224
(Inside) NAT 0-list of access 101
NAT (inside) 10 10.10.10.0 255.255.255.0 0 0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 209.x.x.x 1
Timeout xlate 01:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
crypto dynamic-map Clients_VPN-dynmap 10 transform-set RIGHT
35 Myset1 ipsec-isakmp crypto map
correspondence address 35 Myset1 map cryptographic 116
card crypto Myset1 35 counterpart set x.x.x.x
card crypto Myset1 35 set transform-set Myset1
Myset1 card crypto ipsec 90-isakmp dynamic dynmap Clients_VPN
client configuration address card crypto Myset1 launch
client configuration address card crypto Myset1 answer
interface Myset1 card crypto outside
ISAKMP allows outside
ISAKMP key * address x.x.x.x 255.255.255.255 netmask No.-xauth-no-config-mode
ISAKMP identity address
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 15
ISAKMP policy 15 3des encryption
ISAKMP policy 15 sha hash
15 1 ISAKMP policy group
ISAKMP duration strategy of life 15 28800
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 chopping sha
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 3600
part of pre authentication ISAKMP policy 25
encryption of ISAKMP policy 25
ISAKMP policy 25 md5 hash
25 2 ISAKMP policy group
ISAKMP living 25 3600 duration strategy
part of pre authentication ISAKMP policy 30
ISAKMP policy 30 aes-256 encryption
ISAKMP policy 30 sha hash
30 2 ISAKMP policy group
ISAKMP duration strategy of life 30 86400
vpngroup address vpnpool pool mygroup
vpngroup dns-server dns1 dns2 mygroup
vpngroup mygroup wins1 wins2 wins server
vpngroup mygroup by default-domain mydomain
vpngroup split splitTunnel tunnel mygroup
vpngroup idle time 64000 mygroup
mygroup vpngroup password *.
Telnet timeout 5
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
Hi Rollo,
You can not be implemented for a simple reason, it is not supported on the version 6.x PIX. It relies on the PIX 7.x worm but 7.x is not supported on PIX 506. Thus, in a Word, it can be reached on a PIX 506. If you have an ASA, a PIX 515 running 7.x, a router or a hub as well, it can be reached.
HTH,
Please rate if this helps,
Kind regards
Kamal
-
Open site leads me to the next site-unable to return to the first site-not to the top or arrows back
I was still able to knock an arrow to forward a page or move back a page-can't do it now so when I want to return to the previous page I have to leave the page I'm on and start all over again once, it never happened avant-comment do arrows front and rear returned to my office.
As you can easily see that I am not very practical with the process.
Them
Do you mean that you no longer have the back and the next button in the Navigation toolbar?
If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.
Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".
- Open the Customize via "view > toolbars > customize.
- Make sure the "Bookmarks Toolbar items" are on the personal bar
- If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the toolbar palette in the window the bookmarks toolbar Customize
- If other missing elements are in the palette of the toolbar and drag the window to customize the toolbar
- If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar set up
-
When I am connected to Amazon, I don't get this small lock to the top in the corner.
If anyone can hack my account? How will I know if it's safe?
Thank you.I power to say for sure. If you connect, then scroll through a bunch of products (non secure pages), then access your account and try to view credit card information, you can see the number without getting the password?
-
Installed Service Pack 3 from Windows Update, now I can't get Windows XP to go back upwards, in the normal way or in any configuration of Safe Mode. I am in the Recovery Console using my drive now.
ohnooo313,
Follow the steps on this post on the forum. If these elements do not help, then follow the instructions that apply to this article.Post back with the results. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I hope you understand what I mean, because English is not my language, but Dutch.
Example: 17/11/2014
16-11-2014 15-11-2014 so I recieved my e mails and now
15/11/2014
16/11/2014
17/11/2014and I want that the date of most recent entry up
I hope that there is someone to help me.
Thank you.Heinja
Click the header to sort the column.
-
Getting creative products cloud at the top of a tower
I use an iMac and MacBook Pro
I bought the plan creative cloud with access to all the products in October last year (2015) with a 12 month plan, plus a free month on rate student. I can download more apps is additional creative cloud uninvited to pay or use the free trial. I should have 2 months rest on my plan. How can I download these apps on my laptop as well as my office. I even use mobile apps, but can no longer be additional applications on any of my devices.
Creative Cloud applications unexpectedly back in the test mode. CS6, CCM
https://helpx.Adobe.com/Creative-Suite/KB/trial--1-launch.html
FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?
Maybe you are looking for
-
Webcam no longer works on my Satellite T130
Hello My T130 webcam has stopped working.When windows starts, a message saing that the camera is not found there.At the same time, Windows tries to install a driver for a usb device is 'unknown' and... failed.If I go into Device Manager, I see this u
-
Can someone tell me how to change the language on the sidebar?
Hello world. Can someone tell me how to change the language on the sidebar. I'm in a language other than English, and it drives me crazy. Thanks, have a nice day.
-
Your installation is corrupted or damaged - please reinstall
How can I reinstall when I can't locate my original dvd
-
How backup XP in network storage device USB Vista files
I just attached an external hard drive WD Elements USB my computer Vista Premium and do turn a file & folder backup by using the "backup and Restore Center." I have 2 computers Windows XP Home Edition on my network working group. Can I back up files
-
BlackBerry Smartphones how our memory? Hard drives must be defraged!
After that we use the memory in our BB for a while, adding applications, removing applications, taking pictures, deleting photos and so on, the memory get screwed upward as does a hard drive on a computer. Do we need to do some type of 'household' or