Failed to initialize the installer problem.

Similar Questions

• Failed to initialize the installation program. Error 110. On Windows XP.

  Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:

  Failed to initialize the installation program. Error 110.

  I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?

  Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:

  1. reboot Windows XP in Safe Mode
  2. double-click on the Setup program to start the installation process
  3 cancel the installation process after it starts
  4. restart windows in normal mode

  Now, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.

• Failed to initialize the installation of Adobe

  Hello

  I get this warning message each time I try and you click on an Adobe "install.app". I try to download Adobe Application Manager but can't because I get this. Is there a solution? I rebooted and tried to use Adobe Creative cloud cleaning tool and still does not work.

  I'm on Mac OSX 10.11.3 El Capitan.

  

  Thank you!

  Hi jos20873153,

  Please let us know if you still experience the problem.

  If so, then please refer to the below links:

  • If you receive a specific error code during the installation of an application, see error download or update creative Cloud applications.
  • If this does not resolve the installation problem, you can find the Setup log that generate creative Cloud applications. For more information, see troubleshoot installation problems with the log files.

• Failed to initialize the installer

  Whenever I opened Adobe products (after the recent updates of Mac) they did not open. So I uninstalled them and now that I'm their discount in place, the installation program is unable to initialize.

  I have an iMac (last updated: OS El Capitan, Version 10.11.16) and I'm trying to install Adobe Creative Suite 6: Design Standard by disk.

  Thanks in advance.

  

  Hi Brigidm89097478,

  As you mentioned that you are not able to install your Adobe CS6 on Mac via disc, as it throws an error 'Setup cannot initialize', I recommend trying to download the product and try again: applications download Adobe Creative Suite 6

  Or if not, refer to the below threads as similar has been discussed there:

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  Installation and launch log errors | Adobe Creative Suite 6, Adobe Creative Suite 5.5, Adobe Creative Suite 5

  Resolution of the error messages in the bootstrapper to CS5 and Adobe Creative Suite 5.5

  Troubleshoot installation of Adobe Creative Suite with log files

  Let us know if that helps.

• Error: Failed to initialize the window when trying to play the game

  Original title: failed to initialize the window

  Due to a virus I had to restart and make my computer cleaned.  I was able to play Iwin games before the clean and since I put everything back in but when I went to go play the game, it is said that the window could not initialize and suggested that I have change the depth of color and display.  What that means and what should these elements will be set to be able to play the game?

   
  Hi duchesszachman,
   
  1 are you play games online using the web browser?
   
  As the error message recommend to change the display settings and color. Try these steps and check the result.
  Step 1: Apply the best display settings
  a. see getting the best display on your monitor
  b. check if the problem persists.
   
  Step 2: Check the updates of Windows to see if there is an update available for the video card
  see automatically get recommended drivers and updates for your hardware .
  b. Once you have applied the update, restart the computer so that the changes take effect.
   
  Step 3: If the problem persists, reinstall the game and check the result.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I connect to my computer I get this message: «assert in LSP...» Failed to initialize the mutex. ERR = 5 "

  original title: everytime I log in I get this message... Assert in LSP... Failed to initialize the mutex. ERR = 5./common/shared_memory_ptr.h:188

  X assert in LSP

  fake

  Failed to initialize the mutex. ERR = 5

  ./Common/shared_memory_ptr.h:188

  Abort retry ignore

  What this means... what should I do to fix this

  If I go to any site... it redirects me to one of the CHOICES... Lost IM really have no computer knowledge

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode with network and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Failed to initialize the Application example in Hyperion Planning

  Hello
  
  I'm new on Essbase and Hyperion EPM system 11.1.1.1.0 and I'm trying to test the functionality of planning. I have installed and configured the EPM system, and when I run the Diagnostics of the EPM system, everything is successful unless connecting to Essbase Studio Server (which is a separate issue from another thread).
  
  I'm working with the example of planning application included with the installation. I followed the instructions given here from the blog of John Goodwin, but I encounter an error when I try to initialize the sample application. I also tried creating the application through the workspace, which is documented here. I get the same error during initialization of the sample application.
  
  I get the error message said: "failed to initialize the sample Application. See the log for more details. "Where this journal of planning? I'm running on Tomcat.
  
  When I try to create the database, following the blog of John, through the Administration > manage the database > Create, I also am getting an error on step 18 of 21: [console] verification of member formulas. The error reads as follows:
  
  com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
  Error [1200497] discovered in the formula of Member for "411100" members
  Error [1200497] discovered in the formula of Member for "412100" members
  Error [1200497] discovered in the formula of Member for members "412200."
  Error [1200497] discovered in the formula of Member for "451000" members
  Error [1200497] discovered in the formula of Member to Member "501111".
  Error [1200497] discovered in the formula of Member to Member "501112".
  Error [1200497] discovered in the formula of Member to Member '501130.
  Error [1200497] discovered in the formula of Member to Member "501240".
  Error [1200497] discovered in the formula of Member to Member "501250".
  Error [1200497] discovered in the formula of Member to Member '511200.
  Error [1200497] discovered in the formula of Member to Member '511300.
  Error [1200497] discovered in the formula of Member to Member '511400.
  Error [1200497] discovered in the formula of Member to Member "511500".
  Error [1200497] discovered in the formula of Member to Member "511600".
  Error [1200497] discovered in the formula of Member to Member '511700.
  Error [1200497] discovered in the formula of Member to Member '511800.
  
  What should I do to get this application example upwards and running so I can see what he does?
  How to initialize the sample application?
  Why can't create a database correctly (without the above error), so I can then load data into the database of the Consol via the Essbase Administration Services Console? Currently, the outline in environmental assessments do not check (it gives me the same list of members of the above error messages), and so I can't load the sampleapp_data into the database. If someone saw, please help. Thank you.
  
  -Scott

  Hello

  If you remove the application, back, restart schedule, create the sample application again and initialize you should be fine, then you can return the clock to its normal state.

  You always make the changes on the side planning and when you refresh these changes will be pushed to essbase (which you can see with EAS).

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error "failed to initialize the Viewer...". »

  I am trying to display a CD Microsoft Office Specialist approved courseware for Excel 2003 and I get the following error

  "Failed to initialize the Viewer. If you installed the Viewer to your computer, rerun Setup. If you access the viewer of a server, contact your system administrator.

  General exception. "

  I tried to run the patch as described on this site in 2006 and the command has been executed but I still get the same message, even after reboot. Someone else recommended to rename one of the files windows32 but it won't let me do - it just keeps asking me to try again. It was previously posted in MELL (Microsoft E-learning library).

  It comes with Vista, upgrade install and activate Forum.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  Discussions in Excel General questions.

  They will help you with your questions Excel in the Office discussion groups above.

  At soon Mick Murphy - Microsoft partner

• Failed to initialize the DFX audio enhancer

  original title: DFX audio enhancer and Windows 7 compatibility issues

  DFX audio enhancer was recently released with an upgrade to improve mobile music programs.

  I have a laptop more recent (11/11) with Windows 7 Service Pack 1.
  Update downloaded DFX and now receive an error message stating:
  "Failed to initialize the DFX.
  Please reinstall DFX.
             

  DFX audio enhancer was recently released with an upgrade to improve mobile music programs.

  I have a laptop more recent (11/11) with Windows 7 Service Pack 1.

  Update downloaded DFX and now receive an error message stating:

  "Failed to initialize the DFX.

  Please reinstall DFX.

             

  Hello, Steve.

  See if that helps

  Internet Explorer 9 may stop responding if the DFX Audio Enhancer is installed http://support.Microsoft.com/kb/2727797/en-us?SD=RSS&SPID=15672 Alternatively, you can try to install using compatibility mode. http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f Contact technical support DFX http://www.FXsound.com/

• ORA-01804: failed to initialize the zone in DB11.2.0.4 information

  Dear Experts,

  I installed Oracle DB 11.2.0.4 to upgrade my current DB 11.1.0.7 to 11.2.0.4.

  When I try to connect to the DB I get the following errors

  [oraerp@ebsvm admin] $ sqlplus / as sysdba

  ERROR:

  ORA-01804: failed to initialize the zone information

  SP2-0152: ORACLE does not work properly

  [oraerp@ebsvm admin] $ sqlplus / as sysdba

  ERROR:

  ORA-01804: failed to initialize the zone information

  
  

  SP2-0152: ORACLE does not work properly

  
  

  I use Oracle linux 86 and I installed the R12.1.1 application.

  
  

  Kind regards

  
  

  Ahmad,

  
  

  
  

  
  

  I found the solution in this Doc ID 1562424.1

• The CC extensions manager fails to start with a message "failed to initialize the extensions Manager.

  I installed via Adobe Updater CC CC extensions Manager. When I try and launch the CC extensions Manager, a dialog box appears and says: "failed to initialize the extensions Manager. It won't let me open up after I click OK and it closes.

  The CC extensions manager would conflict with Extension Manager CS6? Other possible solutions?

  I tried to restart, all the CC (and CS6 are up-to-date), and I tried to uninstall and reinstall the CC extensions Manager. Nothing has worked so far.

  Let me know... Thank you!

  Solved.

  What worked for me:

  1 remove an installed copy of the CC extensions Manager

  2. disconnect from the corporate network, log in as a local administrator

  3. download Extension Manager CC of Adobe - Exchange: download Adobe Extension Manager

  4 install

  5 kill the synchronization process of basic creative cloud with the Task Manager

  6. go in C:\ProgramData\Adobe\Extension CC\Configuration\DB Manager and remove or rename the ExMan.db file

  7. start Extension Manager and install extensions

• MapBuilder.jar: failed to initialize the appearance: null

  When I try to start mapbuilder using java-jar mapbuilder.jar it crashes:
  
  Failed to initialize the appearance: null
  error: java.lang.NullPointerException
  
  Running 64-bit Linux in a VNC session.
  
  Anyone else seen this?
  
  JAVA_HOME is set.

  Try to use a version of bit java32 (minimum jre 1.5 or later), and to give the full path, I don't know a lot of Linux.

  See you soon
  Nico

  Published by: gerardnico on August 26, 2009 22:26 Add jre 1.5 or later

• Error "Failed to initialize the raid class" on Equium A100

  Hello peeps

  I seem to have a problem re install the Vista 32 bit product supplied with my A100 - 02L recovery disk. I get a message "unable to initialize the raid class."

  Any ideas of what the problem may be Pls?

  Hi Bfab,

  When you get this error message exactly? You see that at the end of the installation during installation or recovery?

  I used the disk recovery from my laptop, very often, but never had a problem with it. It s still works correctly.
  If recovery disk doesn't work, it could be a malfunction of the equipment.

  Have you tested a normal disc of Microsoft Vista too?

• 5510 printer/Mac 10.7 fail to complete the installation after said to unplug the USB.

  Have installed the relevant software & drivers such as advised by Apple/HP as disc not suitable for my Mac 10.7. After going through the installation process complete Mac fails to find the printer wirelessly after saying to unplug the USB cable. The printer indicates that there is a wireless connection to my router wireless of AOL, but still I get the message "select devices below" but having contracted the USB cable, there is no display device.

  ... Hello again.

  It seems now that HP Support have found the problem so let me give you some information.

  I called the Apple Technical Support on the advice of the staff of the local Apple store but it told me that it is acknowledged as a problem as Apple have already tried to solve the problem and failed he spent on HP.

  I spent 50 odd minutes on phone to the call center of Newcastle (which was fantastic) and now upward and the operation.

  We have downloaded 2 updates of for Mac and printer 5510 (firmware).  In the preferences system (Print & Scan) the file sharing box has been checked (and also ensured that the sharing printers, file sharing and the sharing of scan have been checked).  This has allowed to get up and running with print but then had a problem with scanning.  We then cut to reset (in that order)-router, Mac and printer, then turn it back on in reverse.  Then we have the source of installation of scan in the menu of applications under Hewlett Packard/HP Scan 3.

  I hope this helps.

  John