Failed to retrieve the operating system error 0xc000000f

Similar Questions

• Failed to load the operating system

  Everything seems fine on my PC, except when the machine is started.  He dies, goes to a black screen with the message "Unable to load the operating system".  My work is about to reboot, F8, and then select the drive (South), and then press ENTER.  All right.

  I would return it starts normally.

  Any advice much appreciated.

  "Nirv999" wrote in message news: 09244f68-d2d5-4625-b676-a9e94668d58a...
  > Everything seems fine on my PC, except when the machine is started. He dies,
  > goes to a black screen with the message "unable to load the operating system. My work around
  > is to reboot, F8, and then select the drive (South), then press ENTER.
  > All right.
  >
  > I want to return it starts normally.
  >
  > Any advice much appreciated.
  >
   
   
  This sounds like the BIOS failed in a different startup command, or
  you have a USB key that tries to start and failed (for what is obvious
  reason!)
  -Make sure you have nothing plugged in USB ports except your
  Mouse keyboard &, if necessary.
  then try a cold start
  If it works, then plug your USB stuff one at a time, each reboot
  time - see that it causes.
   
  If it doesn't, then check the Boot in the BIOS order - to ensure that
  the CD and HD are the first two devices (up to you that who!) and who
  Activate you the option "other devices balance"if it's there. "
   
  See if that cures it.
   
  --
  Noel
   
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• All of a sudden Photoshop 13.0.4/Mac OS10.7.5 Save for Web fails due to "unknown operating system error"

  Things were fine 3 hours ago.

  Now don't save for thin web of the operation due to an error "unable to complete this operation. An unknown operating system error has occurred. »

  Nothing has changed on the system.

  I trashed prefs. Photoshop... all of them.

  I reinstalled the update of the Mac OS 10.7.5 drop-down list.

  I rebooted to another drive and repaired permissions (no problem found) and the disc.

  I have booted Safe.

  I disabled all plugins.

  Nothing seems to help.

  Currently uninstalling and relocate or update to see if that helps. But I'm open to any ideas?

  Photoshop 13.0.4, Mac OS Extended 10.7.5, 8-Core 2012 internal separate 32 GB of RAM, SSD boot drive, MacPro dedicated player scratch, 5870 nVida conducted 3 monitors, Wacom Intuos 5

  SOLVED.

  Apparently, something happened to severely corrupt my admin account last night. Do not know what it was, but using a new admin account, or restore the admin account from a backup cured this issue for me.

• setting up the server for database physical standby on a different version of the operating system error

  Hello
  
  We have a database of 11g (11.1.0.7) on Red Hat Enterprise Linux Server release 5.2 (Tikanga) 2.6.18 92.el5 (64-bit) of the operating system. I would like to set up a physical database standy using data guard broker on DR server that has Red Hat Enterprise Linux ES release 4 (Nahant Update 3) 2.6.9 34.dans (64-bit) of ELsmp operating system.
  
  Please notice is possible.
  
  I get the error message when I tried to configure standy by database using GC - "the Oracle home specified (/ u01/app/oracle/product/11.1.0/db_1) is not compatible with the source database." "
  
  Thank you

  OS & Oracle versions must match exactly between primary and standby.

• Failed to load the operating system. Error 0xc000000f

  Hello!

  I got an error 0xc000000f in Windows and it did not start.

  I have a HP DV6 laptop with a pre installed WIN7 Home Premium OEM.

  I tried to use the LIVE CD of Ubuntu Linux and it works!  So I think this isn't a hardware problem.

  But how do I get a recovery for my WIN 7 disc?  How can I retrieve my previous operating system?

  PS Sorry for my English, I'm from the Italy.

  Prego.

• Failed to retrieve the embedded police error

  Hello world

  When you open a pdf file, I get the following error:

  Impossible to extract embedded police "QGCXJE + HelveticaNeueLT-Roman". Some characters may not display or print correctly.

  Anyone know what this means and this will affect printing when I send it to a printer?

  Thanks for any help.

  As long as it appears correctly, there should be no problem with printing. This is just a warning that apparently something was wrong in an embedded font and the result may not be as expected.

• Error running code system. Failed to retrieve the configuration information

  I get this error:
  
  Error running code system. Failed to retrieve the configuration information for the content Terminal item. Unable to load locale 'American English '.
  
  Details:
  
  An error has occurred. The stack trace below shows more information.
  
  ! csSystemCodeExecutionError! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  intradoc.common.ServiceException:! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
  at intradoc.server.Service.buildServiceException(Service.java:1997)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
  at intradoc.server.Service.createServiceException(Service.java:1986)
  at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:609)
  at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:408)
  at intradoc.server.Service.initLocale(Service.java:333)
  at intradoc.server.Service.initDelegatedObjects(Service.java:201)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
  
  Anebody has an idea
  
  
  Thank you
  REDA

  Hello

  Add the SystemLocale = American English variable in your config.cfg, restarting the CS and then see if the same problem persists.

  Srinath

• Sansa clip-drag & drop shockwave object corrupts - the error of the operating system "refreshing database".

  If by mistake, you drag and drop an object flash shockwave from your local directory from the PC to the sansa clip, corrupt you the operating system of the sansa clip. When re - start the sansa clip, clip progresses by up to 70% with error message "refreshing database", but fails to start successfully. If the press-'hold' button on sansa clip, the appliance does not start. It crashes with the error message "refreshing database' but doesn't load is not the operating system.»

  It was a user error to drag - move all the MP3 files in the directory of the PC, one of whom was of type shockwave flash object file.

  Help!

  André

  Try the clip board.  This is the map of the e200 series.

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Portege 3440CT reinstalling the operating system and error NTLDR

  Hi all

  I have a Portege 3400 I picked up a few years ago when starting a business. The machine was made by many, and it no longer starts. I want to reinstall the OS - the only problem is that I don't have the original CD Rom drive that came with the unit. I have a portable CD player that I can plug into the USB port of the adapter, but during the taking of a boot device, it is not yet trying to look for the CD player and immediately gives me an NTLDR error.

  The only option for the boot device which does not give me the same error is when I take the network (Lan), but I have no idea how to do to set up my local network so I can use it as a source for the reinstallation of the operating system.

  Can someone help me?

  Thank you

  Manish
  Matt (at) Gen - a (dot) com

  Hello

  The error NTLDR says that your device or disk is not bootable. What OS did you use? I know that Windows NT doesn't support USB.
  Please check out this article written by Microsoft:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;196661

  Also, I found a topic in the forum with a similar problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2182&MessageID=6043#6043

  Good bye

• black screen: error find the operating system.

  I have 2 hard drives.  & operating systems 1) Win XP I could never remember the password, so I wasn't using.  and Win 7.   Everything was good & then all of a sudden when turned on has received the black screen.   Do not allow me to go anywhere or anything (not that I know what to do!)    I tried to repair using Win XP CD... but he won't answer.

  Hi MariePARKS,

  ·         When exactly do you get the black screen?

  ·         What is the exact error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can disconnect all external devices except the keyboard and mouse, then check if the issue has not changed.

   

  Method 2: If the method above doesn't help then you can check the /rebuildBcd Microsoft Knowledge Base article and /ScanOs then check.

   

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  You can also see the article for more information on the issue:

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

  http://support.Microsoft.com/kb/321626

  I hope this helps.

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• The unit "Act... the operating system" Setup error

  I want to install the unit 4.02, box Exchange 200. As he tried to run the permissions wizard, I keep getting "account has no permissions to act as part of operating system" error etc. How can I fix it? I am logged on as administrator and just created the installation etc. unit accounts and want to grant them permissions. I checked the strategy of local security, Domain Security Policy and Securiy strategy of controllers of domain and granted rights to administrators to act as part of the operating system. They were 'not defined' front. But I still get this error. What else can I check? Thank you

  See on this DDT release notes:

  http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCeb22487&submit=search

  It may have what you turn in.

• I'm CS6 running on the latest version of the operating system on an iMAC. I can't save my work because it says that there is a program error. Please help me solve the problem.

  Program error.  I'm CS6 running on the latest version of the operating system on an iMAC. When I save my work a pop program error appears and I can't save anything. Help

  Mona, I could solve the problem with a video to help adobe by Julieanne Kost. He treats of "how to reset preferences" I have reset preferences and was able to save my work. You can find it in Help/preferences in Photoshop. Good luck

• Error! The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

  Why when I try install Mac Os Yosemite in VMwareplayer when the virtual machine starts, I get this error:

  The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

  I have an AMD A10 processor

  VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine can be done when done in the Apple brand hardware but when done while running under OS X, and for that, you need VMware Fusion not VMware Player/Workstation (or use ESX/ESXi on Apple brand hardware) you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.