Failed to start process after inserting the new RAM. PC3200 1 GB 512 MB.

Similar Questions

• How to complete the implementation of process after inserting the new sim card to unlock the phone

  Try to unlock the phone more 6s with ATT, but do not know how to perform the implementation of process after inserting the new sim card. I got the unlock code confirmed att.

  After the unlock code is confirmed, you will have to restore the unit to the factory via iTunes settings.  He must inform you that the device is unlocked, THEN you change sim cards.

• 1 beep long... After installing the new Ram, Windows XP... Help!

  Hello

  Not familiar with computers, but I recently decided to upgrade the RAM on my very old Windows XP HP Pavilion s7320n Desktop. Initially, it came with 2 x 512 RAM mp. I would like to upgrade to 2 x 2 GB RAM. All I get is different unique long beeps, no startup screen lights up when I swapped the Rams either. I tried to use the two Rams to 2 GB at a time and only one of 2 GB of ram in each slot and still do not work. What seems to be the problem?

  Here are the specs of my computer

  Base processor

  CeleronM 380 (D) clocked at 1.6 GHz

  • 400 MHz front side bus
  • Socket 479

  Chipset

  • Intel 915GV

  Motherboard

  • Manufacturer: Asus
  • Name of the motherboard: PTGV-DM
  • HP/Compaq motherboard name: Onyx2-GL8E

  ↑ before I continue I want to say thank you 'Stuart W J' for helping me out, you've been very patient and helpful.

  -So I downloaded determinative scanner and below is the part specifications I need.

  The module size: 2 gb Kit (1gbx2)

  Package: 240 - Pin DIMM

  Feature: DDR2 PC2-5300

  Data sheet: DDR2 PC2-5300, CL = 5 Unbuffered , NO ECC DDR2-667, 1.8V, 128Meg x 64

  -Then I looked in some Rams and came up with the one below, are the similar specifications?

  Memory size: 2 GB

  Memory technology: DDR2 SDRAM

  Number of Modules: 2 x 1 GB

  Memory speed: 667 MHz

  Standard memory: DDR2-667/PC2-5300

  Error checking: ECC

  Signal processing: did not enter

  Number of pins: 240-pin

  You need memory no ECC - Crucial agenda!

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• error 0x0000007B (0xf78a2524, 0xC0000034, 0x00000000, 0x00000000) after the installation of the new RAM

  I get the BSOD when booting with the STOP: 0x0000007B (0xf78a2524, 0xC0000034, 0x00000000, 0x00000000) message. The computer is a Dell Dimension 8400. I installed the new ram to find this message and we tried him swinging back the RAM on the former with the problem still persists.

  Hello

  Very good chance you loosened a cable or connection when you replaced the
  memory.

  Check with Dell Support, their drivers and documentation online and ask in the Dell
  forums for known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ================================================================

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B<-- read="" this="">

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  
  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk is not - use OPTION 2 to
  make the disc.
  
  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• kb310441 microsoft fixed it does not remove the old username of the process after removing the name of the pc.

  Microsoft fixed that it does not remove the name process after removing the name of the pc. How to make an old username of the process?

  Fix, he changed the name and organization... just not their process attached like taskmanager, explorer.exe, iexplore.exe, wuauclt.exe, and much more.

  Thank you

  Charlie

  Hi charlezim,

  Target article does not username, but the information stored on the computer.

  If you want to change user names, you must create a new user account.

  How to create and configure user accounts in Windows XP

• Compaq Presario C303NR is not completely put on after the new RAM upgrade

  Hello Paul,

  It's Tammy. I finally took the time this morning to upgrade the ram in my laptop, model C303nr. And I am desperate need help because something has gone terribly wrong.

  The laptop starts up to my office, I get nothing but then move lines, a little like snow tv, but more structured. I took the new memory on a couple of times and tried to re-sitting, but I get the same results. Furthermore, when I tried to put the old memory, exactly the same thing happens. Have I completely broke my laptop?

  Can you or anyone out there please help me. This is my first attempt to do something like that and I feel absolutely sick results.

  Clinging to hope for a fix.

  Tammy

  Hi Paul,.

  I must say once again, you have a way very appreciated to bring the balance to my pc problems.

  During my first attempt to install new ram not worked, I thought that I had inadvertently he damaged everything trying to embed. (It is certainly not a room of heap for the maneuver of the ram, clips and fingers! Besides, while trying to stay grounded.) Then, when I couldn't get the old RAM to work either, I thought I had I damaged the laptop everything somehow. It was a horrible feeling.

  Even after that I finally got the new ram to work, I felt bad to not get it in correctly the first time. I felt as if I should have been able to prevent any inconvenience on my part. However, when I read that you have recently encountered a problem with ram of your son, your post made me appreciate that sometimes things happen if its your first time or umpteenth time to do.

  Thank you for giving me the space to hold myself.

  In addition, I can imagine how the ram of your son was stuck. If that does not damage its ram, then maybe ram is a bit more durable than the shell egg-nitroglycerin, I felt... like manipulating its fragility should not always be a concern.

  I wish you the best,

  Tammy

• Corrupt code. Insert the new copy.

  When viewing in ie6,
  All pages on my site started giving an almost empty screen (background image still shows) and a simple error of 1 line:
  
  Corrupt code. Insert the new copy.
  
  Works fine in firefox 2.0, but ive not tested in any other browser.
  I removed a meter js code, which has eliminated the error, but now ago now content showing on my page! -NOTHING!
  just the background. Ive posted in DW8, no errors, but the w3c tells me there are a lot of mistakes - mainly showing my model as an incorrect comment syntax, I think.
  
  Please help, all my pages are empty, and as much as I hate IE, most of my viewers use it...
  
  page is here
  
  

  Nevermind - found a comment not closed...
  Thanks anyway!

• Satellite P100 locks after inserting the DVD + RW disc

  My P100 crashes after inserting the dvd + rw disc.
  If I turn on the computer with the floppy disk in the drive (in general), it works.
  I use the wrong type of dvd.
  Can you advise?

  Hello

  There are many different models of Satellite P100, and I think that the units were delivered with different drives.
  But if the laptop came with DL reader so it should also could handle the DVD + RW.

  Does happen with different DVD + RW from different manufacturers?
  I think that in the manual you will find a list with tested and compatible media that you can use.
  This list, I found in the user manual on my satellite.

• After downlading the new version of iTunes, it will not be open.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I have a TOTAL disaster. After downlading the new ITune prgram, it doesn't let me open it. I tried to reinstall it 3 times and then to restore the previos versions and it is still has not opened. Now, I installed again new version of ITune and when I click the icon, it begins to 'think' and then it stopped without any result and leaves open.

  HELP.how can I solve it with all my songs can not opened and played.

  Liya

  Hi Liya,

  Windows operating system you are using?

  You can view the following Apple support link and check if it helps to solve the problem:

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  If the problem persists, you could get in contact with Apple support for further assistance:

  ITunes support

• How to insert the new line char in sticky c# code?

  Hi all

  I paste the code complete c# on a line of string as follows.

  int _intUserID = 0; string _strUserName = string. Empty; string _strEmployeeID = string.empty;
   
  c# VS2005 .cs file code should stick as follows.

  int _intUserID = 0;
  String _strUserName = string. Empty;
  String _strEmployeeID = string. Empty;

  So how do you achieve this. by inserting the new line char in c#?

  Hi Murthy,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the code in Visual studio.

  The question you posted corresponds to the coding software, it would be better suited to the MSDN Community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• I'm having trouble installing Photoshop CS6 after installing the new hard drive.  What do you suggest me?  Tony

  I'm having trouble installing Photoshop GS6 after installing the new hard drive.  What do you suggest me?  Tony.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• Satellite L675-10T stucks in a black screen after the new RAM upgrade

  Hi all

  I recently decided to upgrade the memory in my laptop pretty.
  I went online, has adapted Rams and ordered.

  What I got are 2 of them:
  http://www.offtek.co.UK/RAM-specification/Toshiba/Toshiba-laptop-memory/satellite-L675-10T/pid921300

  The installation is very easy, but as soon as I turn on my laptop, it stucks in a black screen with a straight white line underscore.

  I guess it's an incompatibility problem?
  Could you please help me?

  Thank you.

  I think you're right, it seems that the modules are not totally compatible, even if the online retailer page says they are
  You can remove the new RAM modules just to check if the laptop to boot up properly I guess correctly the unit upwards.

  Solution? Use a different RAM modules I had good experience using modules from Kingston, they might be a little expensive, but I think they should work correctly.