laptop local disk & CD-ROM drives have failed after power failure

Similar Questions

• RAID5 Perc S100 to T110 failed after power failure

  I have 4x2TB disks in a Raid 5.  The screenshot below shows the failure even if all 4 discs seem to be online.  I was able to run the system utility to run a short as self-test on the 4 discs and all this happened.  They also passed the SMART test.

  I don't know why there is a virtual drive non-RAID since I have none of the extra drives.  And, when selected, there is no physical drive assigned.

  Nobody knows what could happen and how to recover from this?  My system does not start at this time.  It should be started with a Windows Home Server 2011 (equivalent to Windows 2008R2) and there should be 2 partitions.  A small 60 GB boot volume and a volume 5.4 TB share.

  Thanks for any help on this.  I need recover the photos of the share volume and that you may need to send to a data recovery service, if I can't fix it myself.

  Note: I tried to start after removing the disconnection of each disk individually he did nothing except to display the drive disconnected missing in the physical drive list.

  Here is a link to see the screenshot in the BIOS for RAID:

  http://sdrv.Ms/15DU6UL

  UPDATED screenshots of physical disks:

  Physical disk 0: http://sdrv.ms/18DJU02

  Physical disk 1: http://sdrv.ms/18DJZB1

  Physical disk 2: http://sdrv.ms/18DK5sp

  Physical disk 3: http://sdrv.ms/17uToJR

  jywan68

  A last thought would be...  Would it be useful to install Windows in a 5th player and try to run manage open or other RAID Utility?

  Yes, it might help. Since it is a controller function driver there is limited inside the BIOS of the controller functionality. OMSA would provide probably more information within an operating system. You must use a USB or other external media since the S100 takes only supported 4 drives.

  Thank you

• Running Adobe cs5 on my desktop and laptop. The desktop hard drive has failed. A new hard drive was installed. I reinstalled Adobe cs5, but I can't update.

  Running Adobe cs5 on my desktop and laptop. The desktop hard drive has failed. A new hard drive was installed. I reinstalled Adobe cs5, but I can't update.

  Try direct updates

  https://www.Adobe.com/downloads/updates/

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Satellite A300 - Webcam driver open fail after the upgrade to Windows 7

  Hello

  Given that I improve my system to Windows 7 64 bit does not work my webcam. After installing the driver I get the message "webcam driver open failed. "Please restart camera or computer. The camera also do not appear in Device Manager and the microphone are not working also.

  I have a Satellite A300-1LT.

  Help!

  Tal

  Hi pro.surfer,

  You know the forum search? If this isn't the case, you must use because you will find many threads with this error message and lots of useful training, what to do to.

  I put t know which driver you mean, but you need the Camera Assistant Software for webcam. The microphone is a part of webcam, so you need to install the driver for the webcam. ;)

• the driver installation failed after startup

  Hi all an im new here and im facing a problem with my compaq c500 there this BSOD 0x0000007B problem and I was able to start following the guide but since I can not install all the drivers on my laptop it gives me an error called the driver installation failed: could not find the device for this driver. Please help me thanks in advance

  To install the Conexant audio driver, you must first install the MS UAA.

   

  MS-UAA, ici

   

   OR > MS UAA for XP SP3, ici

  For assistance please post MODEL full and P/N of your serial number on the bottom of the laptop.

   

    The localization model number

• DVD - ROM drive not detected after the mode 'sleep'

  I have a HP DVD1170, and it works very well after starting.  After putting my computer in mode 'sleep' and then he wake up, my computer took in not recognizing that there is even a connected DVD player.  He is a recent problem. I got Windows 7 since the beginning of November, and the problem only happened last week.  The drive works again after the restart, but it is not recognized if I put the computer in mode 'sleep' again.

  Hello Neohippie7319,

  Thank you for your message.  You can also click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Could not start, laptop computer, disk hard short DTS test failed

  I am currently not able to start my laptop properly. I have a HP Pavillion G6.

  When I start it, it stays on the screen with the HP logo and a black background for awhile and eventually get to a black screen with the cursor visible and mobile, but unable to do anything else.

  I tried to press F11 at startup to restore the factory settings, the system recognizes the key but leads straight to a black screen that I left it for several hours, but nothing happens.

  I have gone on the menu of system diagnostics and run a quick test that revealed the Hard Drive DST short, Check failed.

  Will I need a new hard drive? Or is it possible to fix it?

  If I need a new, where can I get one from?

  Thanks for any help

  Hello

  The short drive Self Test (DST) failure would indicate that hard is defective and must be replaced.  This is also consistent with recovery and startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook series g6 Nr - see here for an explanation.

  Kind regards

  DP - K

• Dell Latitude c400 laptop IDE Disk/IDE reference check tests fail

  Hi, I'm not a technical expert, but a student of the University 1 forty years. I hope someone can help me. My laptop was fine when I went to bed, when I woke up it was a blue screen with a message about it. with something like the checksum does not match, I ran the diagnostics tree test and the results were:

  IDE Disk Read Test Fail - Error Code ofoo:0244 message block-24794619

  IDE Verify Test Fail error code: ofoo:1 A 44 message block-24794619

  Floppy drive has a line - 1100:012 error Code

  My friend tried to re start for me using an external disc drive, but can't the words show drive not executionable. the external hard drive, I borrowed was a yamaha.

  Thank you for your time: womansad:

  
  

• USB3 Driver install fails after installing fresh Win7

  Today, I did a full 64 fresh install of Windows 7 (using supplied Alienware DVD) of my Alienware Laptop M17xR3.  After finished with updates installed so Win7 Windows7, I went to the web page of Dell Alienware and installed all the recommended drivers.

  In my device manager, all components of the system have been scanned and work well except one... my USB controller under other.  Its my USB 3.0

  I tried to install this driver recommended several times following...

  NEC USB 3.0, v.2.0.26.0, A00see details
  R289408.exe

  The installation fails every time saying: error - 2: the system cannot find the specified file.

  Here's a screenshot:

  

  My serial number is CW2B5Q1

  

  It is probably just a standard set of drivers NEC and Renesas. Have you tried to manually unzip archive and look inside or run from there?

  Have you tried letting Windows load a Windows-Update driver?

• The driver installation fails after custom Windows 7 Pro install

  Hi all.  I just replaced the drive hard on my ProBook s 4440 as the original, one crashed unexpectedly.  I then reinstalled Windows 7 Professional but now have no way to connect to the internet.  I installed the driver of "Sierra Wireless Driver Package for add-on unit high flow Mobile HP un2430", but I still see the message "no connection is available" when I try to connect to my wireless network.  By Device Manager, I'm still missing the drivers for the following (hardware IDS are in brackets):

  (PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30) base system device

  (PCI\VEN_10EC & DEV_8168 & SUBSYS_17F3103C & REV_07) Ethernet controller

  (PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00) network controller

  Controller of communication Simple PCI (PCI VEN_8086 & DEV_1E3A & SUBSYS_17F3103C & REV_04)

  (PCI VEN_8086 & DEV_1E31 & SUBSYS_17F3103C & REV_04) USB controller

  Any help or advice would be greatly appreciated.  Thank you!

  Hello:

  You need the following drivers:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111787-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111305-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-116003-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-113862-1

• NAS2000 disk full after power failure?

  I can't access my SIN more. It is only accessible when I remove my 2 drives en add a usb key.

  When I remove the usb stick up my 2 rear discs, my NAS can be find more.

  And I bought a NAS because I thought it was a safe place for my files

  I've waited days for ASR, but it seems not work this way.

  My NAS is about 2 or 3 years now.

  How can I recover my files?

  Can I just replace the drive and the disc sets will make a copy of the other existing disc then?

  I have 2 identical drives, which are mirrors of each other, because I thought that it is the safest way to store my files.

  Please, I'm really desperade now!

  desperade wrote:

  I can't access my SIN more. It is only accessible when I remove my 2 drives en add a usb key.

  When I remove the usb stick up my 2 rear discs, my NAS can be find more.

  And I bought a NAS because I thought it was a safe place for my files

  I've waited days for ASR, but it seems not work this way.

  My NAS is about 2 or 3 years now.

  How can I recover my files?

  Can I just replace the drive and the disc sets will make a copy of the other existing disc then?

  I have 2 identical drives, which are mirrors of each other, because I thought that it is the safest way to store my files.

  Please, I'm really desperade now!

  What are the lights on when you have discs inserted on the NAS? Have you tried to reset?

  You can refer to this link also got public KB site of Cisco:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=01860033d5ec48399e2de1b81f3a4270_15323.XML&PID=80&...

• Local disk (q :)) appeared, unable to do something with it...

  Windows 7 32 bit

  Under the computer/hard disks, it shows 2 hard drives

  Tl1975657WOD (c :))

  Local disk (q :))

  I have nothing plugged in ports, sometimes I use an external hard drive that is identified as #@ & (@ (e :)))

  Here's my question: what (q) appeared all of a sudden, I can't move it, access, delete, open, copy, rename or format.

  I right click go to properties it shows as complete, used space: 0bytes free space: 0bytes, capacity: 0bytes

  I go to security, it says to continue you must be admin user with permission to view the properties of objects security: I'm Admin, I click on continue, under the current owner, it says: unable to display current owner.

  So, it's this new record Local (q) who does not have capacity, current owner, I am unable to do anything with this player. I realize there is no then what is it, where it comes, and HOW DO I REMOVE IT?

  I rebooted, basically all the things normal and advanced to remove, delete, access, appropriating and cannot do anything with it...

  I haven't installed any new programs or devices, I have anti virus and fire wall running, I get no warnings of all programs on it!

  I am very confused... Can someone help me out here?     Thank you

  Robert

  This disk is used by the click ' n Run Version of Office 2010.

  If you have installed Office 2010, which created and he needs.

• Samsung ATIV Smart PC Touchpad Driver Update Failed

  My Samsung ATIV Smart PC watch Installation have failed after I updated using the SW update. May I ask how to fix it?

  Worked for me, thanks.

  Removed keyboard HID HID-compliant mouse peripheral device manager then rebooted and installed the SW update driver.

• why I can not install my printer driver on this computer laptop w/windows 8? I have the lexmark disk.

  I can't install the printer driver for my printer lexmark 2300 on the my new HP laptop with windows 8.  I have the lexmark installation cd.

  Hello

  Probably the CD was born before Windows 8 is why he knows nothing about this product "nice". Please visit the following site. Hope that your printer is still the list:

  http://support.Lexmark.com/index?page=content&ID=OS27&locale=en&UserLocale=en_AU

  If so, you can download driver from here, it is a product of Lexmark.

  Kind regards.