Failed to start laptop computer Lenovo S210

Similar Questions

• Adapter network on laptop computer Lenovo IdeaPad U350, works do not since upgrading to Windows 7.

  Hello.
  Am running windows 7 on a laptop computer Lenovo IdeaPad U350, but experiencing problems with the network adapter. Wireless connection works, but I can not connect via the direct cable connection. All of the updates were made and in device, the network card Manager (Broadcom 802.11 g network adapter) seems to work fine, BUT still I can't connect. I downloaded the driver from the manuvacturer (Lenovo) and installed. He still does not!

  Any ideas how to solve this problem? I am currently connected to the internet via a wireless connection, but need a wired connection.

  PLEASE HELP :)

  Here's a solution - eventually had to resort to using the Ethernet coz I had to transfer massive amounts of data and using the WiFi was just a bad idea.

  Agree with the above the drivers Lenovo doesn't have just a whole bunch of stuff (unzip, etc, etc) and curiously does not seem to go through the process to INSTALL anything... disappointment.

  For those of you who know how to get to the old plant 'Disc' (Yes, they still exist in Win7), you can get your hands on the drivers here http://www.broadcom.com/support/ethernet_nic/netlink_k57.php--est comes with the good old INF files to tell the system what and where to install

  Go to disc (fuck..... another Google process [Bing since I'm on a MS Web site] the answer)...

  0 have the Admin rights
  1. open your browser.
  2. right click on computer / my computer > properties > Device Manager
  3. I hope that the offending devices (Ethernet in this case) shows prominently in the other category
  4 click on it > properties
  5 looking around for the the driver update button
  6 browse my computer for training software
  7. just choose from devices... (blah blah)
  8 have Disk (tada!)
  9. then point just where you have unpacked the driver with the permission of Broadcomm files.

  Hope that helps.

• Failed to start the computer over HTTP: Error 1000

  I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment.  However, I get this error on half of my offices.  I tried both 2012R2 and for the administration server 2008R2.  It is installed with local SQL.  Desktop computers are Windows 7, floating pool linked clone.  Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ".  Once virtualization fails is disabled and no appstacks cling.

  I have logs from two desktop computers, a successful failure:

  In case of failure:

  [19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)

  [19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response

  [19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)

  [19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)

  Successful operation:

  [19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)

  [19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?

  If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.

  Maybe you try to join an appstack that has some sort of firewall inside rule?

• Could not start, laptop computer, disk hard short DTS test failed

  I am currently not able to start my laptop properly. I have a HP Pavillion G6.

  When I start it, it stays on the screen with the HP logo and a black background for awhile and eventually get to a black screen with the cursor visible and mobile, but unable to do anything else.

  I tried to press F11 at startup to restore the factory settings, the system recognizes the key but leads straight to a black screen that I left it for several hours, but nothing happens.

  I have gone on the menu of system diagnostics and run a quick test that revealed the Hard Drive DST short, Check failed.

  Will I need a new hard drive? Or is it possible to fix it?

  If I need a new, where can I get one from?

  Thanks for any help

  Hello

  The short drive Self Test (DST) failure would indicate that hard is defective and must be replaced.  This is also consistent with recovery and startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook series g6 Nr - see here for an explanation.

  Kind regards

  DP - K

• How to restore laptop computer lenovo provided the factory

  I want to restore my laptop Lenovo N100 (2006 Vintage) for his performance of the plant.  Is there a way to do it without reformatting the C drive?  I have 1 or 1 CD FRO Lenovo recovery and rescue, as well as all 5 of the product recovery CD.  The computer starts a career, but he missed a lot and I want to restore the original level of performance.  Thank you.  JDD 20130522

  http://support.Lenovo.com/en_US/

  Go here to enter your mobile phone number, should be on the bottom of the laptop for your user manual, manual will tell you how to restore the laptop

  You can also read the link below:

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/T61-not-able-to-restore-to-factory-settings/m-p/140500

• Laptop computer Lenovo running Windows 8 factory reset (damaged Sceen) while unattended.

  Good evening everyone

  Could someone please help in a process that could help tracking? My Lenovo laptop running Windows 8 had been trying to run a factory reset and, unfortunately, while left unattended, my younger brother accidentally shot the cables, resulting in my now... current portable computer damaged screen. I left my laptop Lenovo intact and charged through my diet (Yes, I removed safely the internal battery) for more than 24 hours in his supposed factory reset process. I'm unable to view the entire screen and reading a part of the legend that led to believe me that my laptop is in a phase of repair? My current attempt must connect an external monitor to my Lenovo laptop and the caption "D - SUB POWER SAVING MODE" APPEARS. There may be ways to substitute this mode or could someone help please I can find myself having a restless night without solving my unfortunate situation.

  Kind regards

  Use chic

  Hello

  Welcome to the Microsoft community.

  The parameters of the screen and the screen shorts can be different for each OEM (Original equipment manufacturer). That's why I suggest you to contact the manufacturer of your computer.
  http://support.Lenovo.com/us/en/SelectProduct?c=1&returnUrl=%2fus%2fen%2fcontactus

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Satellite A210 - 1 4 - failed to start the laptop computer just orange light

  OK, so this is what happened:

  While my friend was working on his laptop computer that she had his charger plugged but it did not load. I discovered that the lead from the Charger AC/DC had frayed and should resolidering. After that the laptop was working fine, I looked inside the laptop to check the AC plug connector before I fixed the cable.

  I noticed that the WiFi card was broke, so I changed it to a WiFi card in my other laptop used. After back the laptop together and put the battery in, the lights on the front flash blue only and the power light stays orange as if the laptop is in stand-by mode. I can hear the hard drive turns and the CPU heats more CD-ROM drive works, but I can't start that the laptop just sits there with the Orange.

  I tried out the CMOS battery, I took out the main battery and just used the AC/DC adapter, but the same thing happens.

  ANY IDEAS?

  Hello!

  I'm not sure, but what happens if you remove the WiFi card you created in? The new card is may be defective or not compatible with the laptop.
  You can start without WiFi card?

  To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else

  Good bye

• HP G60 laptop OEM Vista h. Prem startup failed to start Windows. A recent hardware or software change might be the Cause. ... Running in a State of Limited Diagnostic... »

  I have a 4 years old HP G60-235DX computer laptop Vista Home Premium OEM factory installed.  I had been doing the blue screen of death the last 8 months.  On Tuesday afternoon, I ran ChkDsk.  It was taking too long so I hit the power button.  now on startup, a message indicates "Windows Failed To Start."  A recent hardware or software change might be the Cause. "I tried to restore it to 4pmPST (Tuesday 7/2), but he sent the message:"your computer is running In A Limited Diagnostic State.  If you use the system restore in this Limited State, you can't undo the restore operation. "Expert Microsoft at the reception of the answer took me by (attempt), safe mode safe mode with network (failed attempt), last known good configuration (failed attempt).   He said that he needs me to order a HP recovery disk because the Vista system files are corrupted, damaged or missing.   Does this sound correct?  Try to get a good HP # order JUST a recovery disk.   I was the victim of the "have you tried to fix your own computer without HP offers you a recovery disk?   This is what happens when you try to fix it yourself without HP offers you a recovery disk. »

  Thank you.
  Skynet

  Your CV has been provided with a score of hidden restore and HP provided instructions on how to create the recovery disks

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c00809678

  If you know the brand of the hard disk on the system, this disc has a free disk bootable verification utility, if you do not know the Player try to WD's SeaTools

  http://www.Seagate.com/GB/en/support/downloads/SeaTools/

• Laptop computer DV6174ea not start after upgrading the bios!

  HP dv6174ea lapop - Win XP media center edition with sp3 - processor intel core duo - 2 GB ram - 120 GB hd

  Ive just used the upgrade of bios of HP downloads flash to upgrade the Phoenix bios on my dv6174ea to version 2.9 1.06.Flashed successfully but on reboot it reaches windows XP start screen (black with logo) fails then a blue screen and restarts quickly. Same cycle occurs again and again. Ive tried to boot from the XP cd, but it gives the message "no hard drive not detected" and fails. detect the drives in the BIOS there is no options to the automobile.

  Curiously, a USB bbot containing paragon hard disk manager won't start and sees my drive (two partitions) and the system partition is active.

  I wonder if the flashing the BIOS changed settings or drive letters so that windows does not see properly. I wish there was just a simple option in the bios for detection of discs.

  Can someone pls help.

  If you want to start your computer from the xp cd, then enter the bios and it try to disable the sata mode and activate the ide mode and then try to format your drive... it should work... !!!

• Portege R100 laptop computer does not start after a while without food

  Hello

  Well there is some time, I bought a beautiful used R100 - a laptop Toshiba in passing - but now, she has developed an annoying problem. Whenever it disconnect the laptop from the power supply for more than 2 hours about (don't know if this is not longer) I can't begin the R100, even if the battery indicator is green. After pressing the powerbutton the power led lights in green, and nothing happens. The "solution" to this problem is to give the R100 some time in this 'turned on' - State and after 15 minutes, I am able to start the computer (turn market again).

  I think that this could be a problem with a battery on the motherboard that is at its limits and needs time to gather enough power to start the computer.

  I hope you can help me identify the problem with my beloved laptop :)

  Yours,

  Tobias

  p.s. I have more or less need to identify the problem and some tips how to solve - the pleasure with the surgery will be from me :)

  p.p.s. Unlike the problem of the M400 further down, I've won if the beginning focused on the hard disk to Flash. In my case the R100 does not give a glance if it does not start. - And as a reference to the other post: "Hmm, I don't remember of the R100 fan not have it at all" * huggs its r100 * "."
  And I tried unplugging all the bits of the laptop and removed the battery, waited 15 minutes and tried to turn it on. the only way to obtain the departure of r100 is the method described above.

  You have an additional RAM installed?

  Maybe you need to re-seat, or it has a intermittent or heat associated with problem.

• No start my computer laptop g6

  I have pavilion g6-134 note book for 2 years. last night it worked very slow and none of my gadgets appear on the desktop. I shut down the laptop computer in 2 hours.

  Today, I'm trying to start it. its gives me an option recommended system reeboot, it sound suggesting to keep the ac power... I have it done but its only shows a grey screen with my mouse cursor

  the other option is to start windows normally, I tried that also but logo only windows is on display with no other change or dialogue boxes...

  I want to mention that 2 days back before that my gadgets are not appear. & laptop was too slow... I rebooted & normal itgot...

  Help, please

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  You can also publish returns with the following details.

  1. the full model number and your cell phone Nr - see here for a guide to the location of such information.

  2 the full version of the operating system that you use (IE Windows 8 64-bit etc.).

  Kind regards

  DP - K

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• HP G62 laptop computer cannot start windows.

  Run the test at the start and test drive, both give the same error.

  type: startup

  result: failure

  Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)

  Description: hard drive 1

  type: hard drive

  result: failure

  Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)

  Description: hard drive 1

  so, I guess, it's the hard drive, no?
  How should I proceed?

  Additional info:

  Model: HP G62 laptop computer

  Prod.ID: LF772EA #ABZ

  running windows 7

  Hello

  The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K