Failed to start service VMWare VirtualCenter

Similar Questions

• Failed to start service "VMware VirtualCenter Server" version 5.5 on windows 2008 r2

  Hello

  If I want to start the VMware VirtualCenter server on my windows 2008 r2 service I get the following error in the windows event logs:

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  
  

  The following information has been saved with the event:

  
  

  Could not initialize the VMware VirtualCenter. Closing...

  
  

  My vcenter Server version is 5.5.0.42389

  
  

  the "VMware vCenter Inventory Service" is running, the other «VMware vCenter...» "service are not running.

  
  

  If I want to fix the vCenter via programs and features, I only get the warning, my system is not in a domain.

  
  

  There are all the other newspapers that I can get the question?
  Maybe any help?

  
  

  I can't say since when vCenter does not work, perhaps because any Windows Update has been installed, but then I have to find anything through google I guess...

  
  

  grateful for any help

  Martin
  

  I just edit the vpxd.conf located in C:\ProgramData\VMware\VMware VirtualCenter\

  Of

  true

  TO

  fake

  the vCenter Server started my windows 2008r2 service after that, but I guess that I am not able to upgrade to vCenter 6.0 when PASS-THROUGH authentication is disabled

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• Failed to start Service Control Center?

  I have some problems with my service from departure control center after restarting the server? I use 11g R2
  
  During the execution of @ORACLE_HOME\owb\rtp\sql\start_service.sql - I get this message;
  
  Not available
  Dianostics:
  failed to start service using the reason of order "manual @ORACLE_HOME\owb\bin\win32\run_service.bat @ORACLE_HOME 2 OWBSYS LOCALHOST:1521:TARGITDW ' ORA-29532: Java call terminated by eception Java exception: java.io.IOExeption: output service start: Code = 0: err = the process cannot access the file because it is being used by another process.
  
  : out = please call [owbhome]/owb/rtp/sql/service.doctor.sql for more information.
  
  
  Medical service States:
  All PL/SQL packages and functions are valid
  Properties of the platform have been loaded properly
  Location of the platform were seeded correctly
  NLS messages have been loaded properly

  the platform service is not available

  Service script is available on the database server
  The connection information stored in the repository are correct
  
  
  I was able to start the service control centre earlier? What could be wrong?

  Hello
  you have several instances of database with the OWB repository on the server?

  Try changing the script of run_service.bat - remove the redirection of output to the file run_service.log at the end of the script ("' > % RTHOME%\owb\log\run_service.log" ")

  Kind regards
  Oleg

• Failed to start service vcenter

  I can't start vcenter service this morning. ODBC connection is good

  in vpxd it shows that

  8 07:00 [04180 'VpxProfiler' warning] Vpxd::ServerApp:Init [VpxdInvtDVS::Init2 (gDB)] took ms 641

  2014 09-30 T 09: 14:09.487 - 07:00 [04180 'dbdbPortgroup' info] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [44]

  2014 09-30 T 09: 14:09.519 - user Solution from 07:00 [info 04180 '[OSP] [SsoFactory_CreateFacade]"] value: vCenterServer_2014.08.19_134647

  2014 09-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] VC ServiceId in LookupService: {C5FF5915-9EC3-4063-99D7-CAF5283D0149}: 5

  09 - 2014-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] STS URI value: https://vc:7444/ims/STSService? wsdl

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [SsoFactory_CreateFacade]"] Admin URI value: https://VC:7444 / sso-adminserver/sdk

  09 - 2014-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] Groupcheck URI value: https://VC:7444 / sso-adminserver/sdk

  2014 09-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] Certificate SSL VC place: C:\ProgramData\VMware\VMware VirtualCenter\ssl\rui.crt

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] m the value URI: https://vc:7444/ims/STSService? wsdl

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] Admin URI value: https://VC:7444 / sso-adminserver/sdk

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] Groupcheck URI value: https://VC:7444 / sso-adminserver/sdk

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] Found dangling SSL error: [0] error:00000001:lib (0): func (0): reason (1)

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] Found dangling SSL error: [1] error:00000001:lib (0): func (0): reason (1)

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "[OSP] [SsoFactory_CreateFacade]"] Impossible to create the SSO façade: vmodl.fault.SystemError.

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: Vpx::Common:Sso:SsoFactory_CreateFacade(sslContext,_ssoFacadeConstPtr)

  -> Backtrace:

  -> backtrace [00] rip 000000018018b86a

  -> backtrace [01] rip 0000000180102ac8

  -> backtrace [02] rip 0000000180103f9e

  -> backtrace [03] rip 000000018008d22b

  -> backtrace [04] rip 0000000000485bdc

  -> backtrace [05] rip 00000000004 a 6652

  -> backtrace [06] rip 000000013fc0f001

  -> backtrace [07] rip 000000013fc08e1c

  -> backtrace [08] rip 000000013fe2d8db

  -> backtrace [09] rip 000007fefd88a82d

  -> backtrace [10] rip 00000000774759ed

  -> backtrace [11] rip 00000000776ac541

  ->

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 'VpxProfiler' warning] ServerApp::Init [TotalTime] took ms 11234

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2014 09-30 T 09: 14:09.722 - 07:00 [04180 'vpxdvpxdSupportManager' info] free/busy information wrote

  2014 09-30 T 09: 14:10.487 - 07:00 [06680 WARNING opID "VpxProfiler" SWI-726ad9f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12015

  2014 09-30 T 09: 14:22.487 - 07:00 [06296 WARNING opID "VpxProfiler" SWI-2c226ef =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:34.487 - 07:00 [06672 WARNING opID "VpxProfiler" SWI-1c39fc12 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:46.486 - 07:00 [06672 WARNING opID "VpxProfiler" SWI - 27769 c 53 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:58.486 - 07:00 [06672 WARNING opID "VpxProfiler" SWI-12512cf1 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:58.861 - 07:00 [04180 'Default' info] forcing of VMware VirtualCenter stop now

  any idea? SSO service / inventory is started end

  Looks like the issue was a sso login incorrect being introduced in sql server password. Once I corrected the sso login password for the database, the vcenter service started very well.

  At least it worked in my situation.

  Thank you

• Failed to start service vCO today, which was OK

  Hi guys and experts of vCO,

  I had a problem starting the service of vCO. The vCO is on a LinuxSUSE OS.

  I've done several times, but always failed to start the service, if the server vco is on all tabs are green on the page of configuration of the vco. When I clicked on the link service to start, it will take about 5 minutes and then saying "the server is started" in green letters, but still, the service is stopped. Only changes made recently that I remember is that I activated the "view web development" mode last week and restart the service (it worked), and when I disabled that today and try to restart once again, he stopped and cannot restart.

  Here are the logs of the orchestrator configuration:

  

  05-06-2013 14:44:50.494 + the list of incomplete deployment 0000 ERROR [URLDeploymentScanner]:

  -Packages waiting for a deployment program-

  org.jboss.deployment.DeploymentInfo@b8e609b5 {url=file:/opt/vmo/app-server/server/vmo/deploy/jboss-base/http-invoker.sar/invoker.war/}

  responsible for the deployment: null

  status: from

  State: INIT_WAITING_DEPLOYER

  Look: file:/opt/vmo/app-server/server/vmo/deploy/jboss-base/http-invoker.sar/invoker.war/

  altDD: null

  lastDeployed: 1370443489877

  lastModified: 1345562778000

  MBeans:

  org.jboss.deployment.DeploymentInfo@a36be76b {url=file:/opt/vmo/app-server/server/vmo/deploy/jboss-deploy-tomcat/jbossweb-tomcat55.sar/ROOT.war/}

  responsible for the deployment: null

  status: from

  State: INIT_WAITING_DEPLOYER

  Look: file:/opt/vmo/app-server/server/vmo/deploy/jboss-deploy-tomcat/jbossweb-tomcat55.sar/ROOT.war/

  altDD: null

  lastDeployed: 1370443489877

  lastModified: 1345562778000

  MBeans:

  org.jboss.deployment.DeploymentInfo@3df89786 {url=file:/opt/vmo/app-server/server/vmo/deploy/jboss-base/jboss-ha-local-jdbc.rar}

  responsible for the deployment: null

  status: null

  State: INIT_WAITING_DEPLOYER

  Look: file:/opt/vmo/app-server/server/vmo/deploy/jboss-base/jboss-ha-local-jdbc.rar

  altDD: null

  lastDeployed: 1370443490073

  lastModified: 1370443490000

  MBeans:

  And kept repeating the above posts...

  Thank you very much!

  Yes, the screenshot seems good. It shows the storage used same as provided - I assume that this has been set up thick, that's fine... Is there any free space on the disk? SSH to the VA to confirm.

  Apart from perhaps running out of space, I'm not sure what is causing this problem - maybe a deployment is corrupted? Your snapshot - is that taken before questions: If so, you should probably try to return.

  If it was me, I cut my losses and try to deploy another device. So far, I had very good experiences with the device of the vCO and use it in multiple locations daily for my test/dev work.

• Failed to start service on Windows 7 windows event log. Error 4201. __

  Cannot start service on Local computer Windows event log.  4201 error: The instance name passed was not recognized as valid by a WMI data provider.

  Hi rung_windows7,

  Renaming or deleting the following file seems to work for some users:

  C:\Windows\System32\LogFiles\WMI\RtBackup

  REF: error 4201 event log - ERROR_WMI_INSTANCE_NOT_FOUND (a great helluva thread)
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Failed to start service secuity

  Posted this question before, but since this is my first time I couldn't find where I could go to see my question or answer...

  so if I posted this twice, I apologize...

  Windows 7 64 bit

  have a security error unable to start service

  perforned a scan using mcafee and it said that it had removed the infected... file and that the computer is secure

  conducted an analysis using the microsoft... scanner result... .no infected files...

  complete the following steps to no vail...

  went to the service and clicked on auto... apply... beginning... service does not start

  also, went on the services tab to connect and clicked on the local system. .get an error 1079... the a/c specified for this service is different from the a/c specified for other services in the same process...

  backed up registry and deleted HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\wscsvc.. .and opens Notepad and copied the contents of Microsoft Article ID: 2519899 and imported to the registry... service does not start

  did a clean boot... .Disabling mcafee security... tried to start the service... won't start...

  also open by default on the computer and tried to start the service, it does not start...

  also unable to update windows... change UAC...

  Please please help

  Discussions were merged.

  Deleted duplicate.

  a sfc/scannow, executed

  The C:\Windows\System32\wscsvc.dll's exsist

  cm

  Opens Windows directory using the command % systemroot %

  Antonio Dsilva

  The service DLL may be invalid, or missing in the registry. Download, unzip and run the REG file below:

  http://www.Winhelponline.com/blog/wp-content/uploads/Misc/W7-wscsvc.zip

  (via the various registry fixes for Windows 7/XP/Vista - the Winhelponline Blog)

  Restart Windows and the display of the State of Windows Security Center.

• Failed to start service presentation

  Hi, everything worked out, but now I can't start my presentation service. I tried with different RPDs to check that there are no problems with it. The error I get is "Could not create a user to Orcacle BI Server during starting connection." Please try again. Any thoughts?
  
  Thank you

  Hello

  Journal of presentation:
  Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.
  Authentication failure.
  ODBC driver returned an error (SQLDriverConnectW).
  [nQSError: 10018] Access to the requested connection is denied.
  [nQSError: 43113] The message returned by OBIS.
  [nQSError: 43126] Authentication failed: invalid user/password.

  After several hours of debugging, we found as patterns locked DB/user MDS and obtained BIPLATFORM / expired. This is a parameter in Oracle DB which makes patterns or users to lock after a period of time. You can use the following to unlock the accounts:

  ALTER USER MDS ACCOUNT UNLOCK;
  ALTER USER BIPLATFORM ACCOUNT UNLOCK;

  If the password has expired you make it back to the password that is used during installation. Use the following syntax:

  ALTER USER IDENTIFIED BY Admin123 MDS;
  ALTER USER BIPLATFORM IDENTIFIED BY Admin123;

  That did the trick and we were able to connect to the OBI Referral Services.

  For more information:

  http://obiee11gqna.blogspot.com/2011/09/OBIEE-11g-errors-nqserror-43113.html

  Thank you

  Deva

• Failed to start service to Xcode because of the license agreement

  Since the upgrade to 5.0.15 server, I have met some problems trying to start the service of Xcode, which prevents good start:

  When I tried to select Xcode by clicking Choose Xcode in the server window, after I chose/Applications/Xcode, I saw the message 'preparation to set the server to Xcode' and Xcode was launched. Xcode then displays a message indicating "Xcode requires permission to use accessibility for the user interface controls. "Click on request access to open system preferences add Xcode to the list of allowed applications to control your computer." When I click on Request Access, nothing significant happened. I opened System Preferences > accessibility manually, but did not know where to add to the list of Xcode. I didn't see any list under Interacting > keyboard, mouse and Trackpad, or switch control. None of the other sections seems to contain a list of applications either. After some digging around, I noticed that there is an entry in System Preferences > Security & privacy > privacy for Xcode for assistance that has been disabled. Check the box seems to have accomplished the goal here (fingers crossed).

  Server, and then displays the message "you must accept the terms of the licenseXcode. Restart Xcode and accept the software license agreement or choose another version of Xcode'.» When I launched Xcode, however, he showed not the license agreement. Delivering the xcodebuild-license sudo and sudo xcodebuild-license accepts commands in a terminal window do not appear to do this in the right way, because the server continues to display this message every time I chose the Xcode application.

  There must be some reason Xcode does not display the license agreement when I run the application, any server insists I did not accept the agreement despite having accepted several times.

  Any ideas?

  Potentially a bug known, according to the affected versions.   (Look for the license in the Xcode release notes).

  If the approach in the release notes does not work and If this existing thread does not work...

  .. then see if the brute force approach works...

  Turn off of Xcode,.app services.    Xcode remove the system.  Reset.  Reinstall Xcode, a new download (current) or a (current) version stored on another local system, launch Xcode, accept the license.  Then configure Server.app and see if he's happy now.

• Failed to start service ICS in Windows Vista.

  Original title: NSI proxy service missing

  my ICS service does not start without the NSI proxy service running, but the problem is that it is absent. is their a goes back to add it manually in the registry?

  Hi cfreeman3,

  Given that the service is missing (missing) from the list of services, allows you to uninstall and reinstall the network card and see if it works.

  Step 1:

  Uninstall the drivers from Device Manager.

  a. click on start.

  b. type devmgmt.msc in search, and then press enter.

  c. expand network card in Device Manager, right-click on the devices one by one and select Uninstall.

  d. uninstall all devices, and then restart the computer.

  Step 2:

  Log on to the computer or the device manufacturer's Web site and install the latest drivers from the network.

  Update drivers: recommended links

  I hope this helps!

• Failed to start service from WindowsUpdate 64 win7

  Unable to get the Windows Update service is running. When I try to start the service, I get the message:

  Windows could not start the Windows Update service on Local computer. Error 126: The specified module is not found.

  I tried to launch microsoft FixIt @ https://support.microsoft.com/en-us/kb/971058, and he said he detects and fixes some problems, but I still have the same problem when I try to start the Windows Update service.

  FixIt cabin looks like this...

  Proxy: Access directly (without proxy server).
  Last update installed:
  Last Message:
  Language settings: en
  bits: running
  wuauserv: order
  Domain: DIR.slb.com
  The Windows Update Agent version: not found
  Microsoft Windows 7 Enterprise SP: 1
  Processor type: x 64
  Operating system architecture: 64-bit

  "Version of the Windows Update Agent: not found"seems suspicious to me. "

  See the content @ https://support.microsoft.com/en-us/kb/959077 on changing the registry key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component based Servicing\Version) - but my key looked very well already, so it has not changed.

  Have also tried to re - install Windows Update (WindowsUpdateAgent-7, 6 - x 64 .exe), but that did not help either one.

  Any ideas would be very appreciated. I can recreate the image on my disk c with Win7, but it will eliminate many programs of application and this is my last resort.

  Did you run malwarebytes again?

  There are essentially 4 services that need to be defined to the delay of the auto

  Background intelligent transfer services
  Cryptographic
  Windows Installer = this one is dependent on the update parameter selected.
  Windows Update

  Indeed, I believe that you have a damaged user account

  What security you have installed?

• Failed to start service websigner

  I downloaded and installed the BlackBerry signing, tool generated ID (is he really mine to choose randomly?) and the name of the signer and sent the file to myself.  When I try to start the service he gets stuck in start mode and are never in the started state.  Which port the service works and how to configure it?

  Thank you

  Philippe

  I tried again and it worked.   The RIM servers must have been down and for some reason when I tried to sign up with my server, it attempted to validate something with the RIM servers and gave the wrong message "Incorrect password" - makes no sense but I'm willing to try to connect my own files now.

  Summary: on Windows Server 2003 - you must use the console to start the service.

  Thanks to all who have provided advice, etc.

• Failed to start service to power?

  It would seem that the inabilitly to start the service of power is the reason I can't view or edit my power management.  When I try manually start the service of power, the system responds with Access Denied.  I'm admin on a stand-alone computer (a Dell Precision M4400).  I did a powercfg - RestoreDefaultSchemes and have been able to access the power management (and the power supply Service is running).  After a reboot, power management is then went and the service of power supply is interrupted.  The event viewer indicates that the Service of power supply could start.  Once more, later, I try to start the Service of power, he responds with Access Denied.  I looked EVERYWHERE to find a way to control these permissions with no luck.  Thanks in advance for any help you can provide.

  Simple little fix for me was to go into the Device Manager , delete all ACPI devices and allow windows to reinstall the drivers.