Failed to start Service Control Center?

Similar Questions

• Service Control Center

  Hello
  My installation works as follows. I have a laptop with the now installed Warehouse Builder. This means that on this laptop is my design center. On some servers, I have installed a repository. To deploy on one of them, I start the service control center for my laptop and do in the repository remote all I want to do. So far so good.
  But I also have tasks scheduled on these servers. This forum said that we should start the service control center on the server. But! Of course, the server has no code service. Does this mean that I have to install the generator of the warehouse as on the remote server where I want to run scheduled tasks? Or is it possible to install only service control center?
  
  Thank you
  
  S.

  Yes, you will need to install OWB on each of the servers you use as a run-time and start the service control center on each server. The Service control centre is part of the OWB installation and cannot be installed separately. He is responsible for the management of applications for a single run-time repository, and so if you have several repositories of runtime, you will need several runtime services.

  What you might try is install OWB on one server and then start multiple versions of the Control Service Center - one for each of your remotes. They should not conflict, and then you just do a single installation.

  NigelB.

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• Warehouse Builder Installation - Service Control Center

  I am new to Oracle so please excuse me if I ask a stupid question. We have a database of the 'target' Oracle on a server that will be our database of ODS containing the repository of the warehouse. Based on this document http://download-uk.oracle.com/docs/cd/B31080_01/doc/install.102/b28224/reqs01.htm#BGBIDBHJ installation, I would like to ' Builder with Client/Server application traditional warehouse "to realize and install only the 'Control Center Service' on the data warehouse database server.
  
  Can you please point me in the right direction to get the documentation or expose the basic steps?
  
  Install all components of storage/storage at all on the ODS database server?
  
  Thanks in advance

  Hello

  you need the owb on the client software to run on the client design center and you need software owb on the database server to run the service control center there.
  Using the wizard of repository installed on the server to create the repository automatically configures the database to run the control center service automatically. If you use the one installed on the client, you will need to provide the path to the software owb on the server during installation.

  In addition, there is one type of owb software that contains the client and server components.

  Good luck
  Carsten.

• Cannot start Service Security Center

  When I try to start the Security Center, a Message appears saying Security Center service will not start and when I try to start the windows Defender window opens

  error 0 x 80070424 and upward with.

  Try the RESOLUTION in this article also read whole article!

  http://support.Microsoft.com/kb/2519899

• Failed to start service secuity

  Posted this question before, but since this is my first time I couldn't find where I could go to see my question or answer...

  so if I posted this twice, I apologize...

  Windows 7 64 bit

  have a security error unable to start service

  perforned a scan using mcafee and it said that it had removed the infected... file and that the computer is secure

  conducted an analysis using the microsoft... scanner result... .no infected files...

  complete the following steps to no vail...

  went to the service and clicked on auto... apply... beginning... service does not start

  also, went on the services tab to connect and clicked on the local system. .get an error 1079... the a/c specified for this service is different from the a/c specified for other services in the same process...

  backed up registry and deleted HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\wscsvc.. .and opens Notepad and copied the contents of Microsoft Article ID: 2519899 and imported to the registry... service does not start

  did a clean boot... .Disabling mcafee security... tried to start the service... won't start...

  also open by default on the computer and tried to start the service, it does not start...

  also unable to update windows... change UAC...

  Please please help

  Discussions were merged.

  Deleted duplicate.

  a sfc/scannow, executed

  The C:\Windows\System32\wscsvc.dll's exsist

  cm

  Opens Windows directory using the command % systemroot %

  Antonio Dsilva

  The service DLL may be invalid, or missing in the registry. Download, unzip and run the REG file below:

  http://www.Winhelponline.com/blog/wp-content/uploads/Misc/W7-wscsvc.zip

  (via the various registry fixes for Windows 7/XP/Vista - the Winhelponline Blog)

  Restart Windows and the display of the State of Windows Security Center.

• Failed to start service vCO today, which was OK

  Hi guys and experts of vCO,

  I had a problem starting the service of vCO. The vCO is on a LinuxSUSE OS.

  I've done several times, but always failed to start the service, if the server vco is on all tabs are green on the page of configuration of the vco. When I clicked on the link service to start, it will take about 5 minutes and then saying "the server is started" in green letters, but still, the service is stopped. Only changes made recently that I remember is that I activated the "view web development" mode last week and restart the service (it worked), and when I disabled that today and try to restart once again, he stopped and cannot restart.

  Here are the logs of the orchestrator configuration:

  

  05-06-2013 14:44:50.494 + the list of incomplete deployment 0000 ERROR [URLDeploymentScanner]:

  -Packages waiting for a deployment program-

  org.jboss.deployment.DeploymentInfo@b8e609b5 {url=file:/opt/vmo/app-server/server/vmo/deploy/jboss-base/http-invoker.sar/invoker.war/}

  responsible for the deployment: null

  status: from

  State: INIT_WAITING_DEPLOYER

  Look: file:/opt/vmo/app-server/server/vmo/deploy/jboss-base/http-invoker.sar/invoker.war/

  altDD: null

  lastDeployed: 1370443489877

  lastModified: 1345562778000

  MBeans:

  org.jboss.deployment.DeploymentInfo@a36be76b {url=file:/opt/vmo/app-server/server/vmo/deploy/jboss-deploy-tomcat/jbossweb-tomcat55.sar/ROOT.war/}

  responsible for the deployment: null

  status: from

  State: INIT_WAITING_DEPLOYER

  Look: file:/opt/vmo/app-server/server/vmo/deploy/jboss-deploy-tomcat/jbossweb-tomcat55.sar/ROOT.war/

  altDD: null

  lastDeployed: 1370443489877

  lastModified: 1345562778000

  MBeans:

  org.jboss.deployment.DeploymentInfo@3df89786 {url=file:/opt/vmo/app-server/server/vmo/deploy/jboss-base/jboss-ha-local-jdbc.rar}

  responsible for the deployment: null

  status: null

  State: INIT_WAITING_DEPLOYER

  Look: file:/opt/vmo/app-server/server/vmo/deploy/jboss-base/jboss-ha-local-jdbc.rar

  altDD: null

  lastDeployed: 1370443490073

  lastModified: 1370443490000

  MBeans:

  And kept repeating the above posts...

  Thank you very much!

  Yes, the screenshot seems good. It shows the storage used same as provided - I assume that this has been set up thick, that's fine... Is there any free space on the disk? SSH to the VA to confirm.

  Apart from perhaps running out of space, I'm not sure what is causing this problem - maybe a deployment is corrupted? Your snapshot - is that taken before questions: If so, you should probably try to return.

  If it was me, I cut my losses and try to deploy another device. So far, I had very good experiences with the device of the vCO and use it in multiple locations daily for my test/dev work.

• Failed to start service on Windows 7 windows event log. Error 4201. __

  Cannot start service on Local computer Windows event log.  4201 error: The instance name passed was not recognized as valid by a WMI data provider.

  Hi rung_windows7,

  Renaming or deleting the following file seems to work for some users:

  C:\Windows\System32\LogFiles\WMI\RtBackup

  REF: error 4201 event log - ERROR_WMI_INSTANCE_NOT_FOUND (a great helluva thread)
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Failed to start service to Xcode because of the license agreement

  Since the upgrade to 5.0.15 server, I have met some problems trying to start the service of Xcode, which prevents good start:

  When I tried to select Xcode by clicking Choose Xcode in the server window, after I chose/Applications/Xcode, I saw the message 'preparation to set the server to Xcode' and Xcode was launched. Xcode then displays a message indicating "Xcode requires permission to use accessibility for the user interface controls. "Click on request access to open system preferences add Xcode to the list of allowed applications to control your computer." When I click on Request Access, nothing significant happened. I opened System Preferences > accessibility manually, but did not know where to add to the list of Xcode. I didn't see any list under Interacting > keyboard, mouse and Trackpad, or switch control. None of the other sections seems to contain a list of applications either. After some digging around, I noticed that there is an entry in System Preferences > Security & privacy > privacy for Xcode for assistance that has been disabled. Check the box seems to have accomplished the goal here (fingers crossed).

  Server, and then displays the message "you must accept the terms of the licenseXcode. Restart Xcode and accept the software license agreement or choose another version of Xcode'.» When I launched Xcode, however, he showed not the license agreement. Delivering the xcodebuild-license sudo and sudo xcodebuild-license accepts commands in a terminal window do not appear to do this in the right way, because the server continues to display this message every time I chose the Xcode application.

  There must be some reason Xcode does not display the license agreement when I run the application, any server insists I did not accept the agreement despite having accepted several times.

  Any ideas?

  Potentially a bug known, according to the affected versions.   (Look for the license in the Xcode release notes).

  If the approach in the release notes does not work and If this existing thread does not work...

  .. then see if the brute force approach works...

  Turn off of Xcode,.app services.    Xcode remove the system.  Reset.  Reinstall Xcode, a new download (current) or a (current) version stored on another local system, launch Xcode, accept the license.  Then configure Server.app and see if he's happy now.

• Windows could not start service Security Center, Windows 7

  I am using windows 7 ultimate in my laptop, but whenever I try to open the security service windows to open action center located on the menu to the Quick Launch bar, it generates an error message stating:

  "Could not start the windows Security Center service.
  No error number.

  You can try the steps below and check if the problem is resolved.

  Try to manually start the service from the Services Management Console.

  For the Services console type in the find field, then press ENTER. You will need to click continue if you are prompted to open the Services window.

  After the opening of Component Services.

  Click: Services (Local)

  At the bottom of the window there will be two tabs, click: Standard

  After that will appear a list of services, including Security Center

  In this window, you must locate the Security Center service do a right click it and go to Properties, select Automatic, and then click apply , then select Start.

  If your Security Center turns off automatically after a few seconds or minutes, proceed as shown in the following post:
  COMBOFIX WORKED FOR ME! in Windows 7
  My symptoms were the same as above. Only when affecting the automatic Security Center service, and the startup, it automatically set it to homes disabled after a few seconds or more.
  This solution worked for me,
  -activate the hidden administrator account by following the steps on this tutorial... http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/
  -Once finished activating in the command prompt, to bookmark the websites for later use and log on to Windows.
  There is now an administrator option in the logon screen.
  -log on to the administrator account open a browser and open this page again.
  -Click on this link below and download to your desktop... http://www.combofix.org/downloadlink.php
  -disable your connection and internet anti-virus software.
  -Now run combofix.exe
  A window will appear and many scans will take place. It will take some time. Finally, the computer may restart. When this is the case, log back in the administrator account and Combofix will resume running for a little while. Do nothing until the log file appears automatically.
  -Restart your pc and you log in Administrator account.
  -now set the Security Center service back to automatic, then click on apply. Then, click on start and ok.
  -Restart your PC and you can now log in to your normal user account.
  Everything should work now... Well, it did for me.
  If you want to disable the account again, you can do so by following the steps to disable in the link above.
  After HAVING finished with "Combofix" you may have to restart your computer once more, and then go to "Security Center" again via "Component Services" and Activate and Start Security Center. This time, it will work for good.
  I hope this helps and good luck!

• Failed to start service to power?

  It would seem that the inabilitly to start the service of power is the reason I can't view or edit my power management.  When I try manually start the service of power, the system responds with Access Denied.  I'm admin on a stand-alone computer (a Dell Precision M4400).  I did a powercfg - RestoreDefaultSchemes and have been able to access the power management (and the power supply Service is running).  After a reboot, power management is then went and the service of power supply is interrupted.  The event viewer indicates that the Service of power supply could start.  Once more, later, I try to start the Service of power, he responds with Access Denied.  I looked EVERYWHERE to find a way to control these permissions with no luck.  Thanks in advance for any help you can provide.

  Simple little fix for me was to go into the Device Manager , delete all ACPI devices and allow windows to reinstall the drivers.

• Failed to start service vcenter

  I can't start vcenter service this morning. ODBC connection is good

  in vpxd it shows that

  8 07:00 [04180 'VpxProfiler' warning] Vpxd::ServerApp:Init [VpxdInvtDVS::Init2 (gDB)] took ms 641

  2014 09-30 T 09: 14:09.487 - 07:00 [04180 'dbdbPortgroup' info] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [44]

  2014 09-30 T 09: 14:09.519 - user Solution from 07:00 [info 04180 '[OSP] [SsoFactory_CreateFacade]"] value: vCenterServer_2014.08.19_134647

  2014 09-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] VC ServiceId in LookupService: {C5FF5915-9EC3-4063-99D7-CAF5283D0149}: 5

  09 - 2014-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] STS URI value: https://vc:7444/ims/STSService? wsdl

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [SsoFactory_CreateFacade]"] Admin URI value: https://VC:7444 / sso-adminserver/sdk

  09 - 2014-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] Groupcheck URI value: https://VC:7444 / sso-adminserver/sdk

  2014 09-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] Certificate SSL VC place: C:\ProgramData\VMware\VMware VirtualCenter\ssl\rui.crt

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] m the value URI: https://vc:7444/ims/STSService? wsdl

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] Admin URI value: https://VC:7444 / sso-adminserver/sdk

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] Groupcheck URI value: https://VC:7444 / sso-adminserver/sdk

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] Found dangling SSL error: [0] error:00000001:lib (0): func (0): reason (1)

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] Found dangling SSL error: [1] error:00000001:lib (0): func (0): reason (1)

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "[OSP] [SsoFactory_CreateFacade]"] Impossible to create the SSO façade: vmodl.fault.SystemError.

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: Vpx::Common:Sso:SsoFactory_CreateFacade(sslContext,_ssoFacadeConstPtr)

  -> Backtrace:

  -> backtrace [00] rip 000000018018b86a

  -> backtrace [01] rip 0000000180102ac8

  -> backtrace [02] rip 0000000180103f9e

  -> backtrace [03] rip 000000018008d22b

  -> backtrace [04] rip 0000000000485bdc

  -> backtrace [05] rip 00000000004 a 6652

  -> backtrace [06] rip 000000013fc0f001

  -> backtrace [07] rip 000000013fc08e1c

  -> backtrace [08] rip 000000013fe2d8db

  -> backtrace [09] rip 000007fefd88a82d

  -> backtrace [10] rip 00000000774759ed

  -> backtrace [11] rip 00000000776ac541

  ->

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 'VpxProfiler' warning] ServerApp::Init [TotalTime] took ms 11234

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2014 09-30 T 09: 14:09.722 - 07:00 [04180 'vpxdvpxdSupportManager' info] free/busy information wrote

  2014 09-30 T 09: 14:10.487 - 07:00 [06680 WARNING opID "VpxProfiler" SWI-726ad9f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12015

  2014 09-30 T 09: 14:22.487 - 07:00 [06296 WARNING opID "VpxProfiler" SWI-2c226ef =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:34.487 - 07:00 [06672 WARNING opID "VpxProfiler" SWI-1c39fc12 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:46.486 - 07:00 [06672 WARNING opID "VpxProfiler" SWI - 27769 c 53 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:58.486 - 07:00 [06672 WARNING opID "VpxProfiler" SWI-12512cf1 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:58.861 - 07:00 [04180 'Default' info] forcing of VMware VirtualCenter stop now

  any idea? SSO service / inventory is started end

  Looks like the issue was a sso login incorrect being introduced in sql server password. Once I corrected the sso login password for the database, the vcenter service started very well.

  At least it worked in my situation.

  Thank you

• Failed to start service VMWare VirtualCenter

  Hi all

  Having problems when you try to start the service described above.  I get the following error message when you try:

  Windows could not start the VMWare VirtualCenter Server on the local computer.  Error code 2.

  The event viewer shows the following:

  The VMWare VirtualCenter Server Service stopped with the error service special 2 (0x2)

  Event ID: 7024

  I am attaching the file VPXD.log, where I noticed there is an error with init 'vpxdvpxdmain' failed: unexpected exception

  I would except with gratitude for this assistance.

  Doug

  Got it up and running again.  I had to restart the VCenter Single Sign On service before trying to start the VC Server service.

  Cheers for the help.

  Doug

• Failed to start service presentation

  Hi, everything worked out, but now I can't start my presentation service. I tried with different RPDs to check that there are no problems with it. The error I get is "Could not create a user to Orcacle BI Server during starting connection." Please try again. Any thoughts?
  
  Thank you

  Hello

  Journal of presentation:
  Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.
  Authentication failure.
  ODBC driver returned an error (SQLDriverConnectW).
  [nQSError: 10018] Access to the requested connection is denied.
  [nQSError: 43113] The message returned by OBIS.
  [nQSError: 43126] Authentication failed: invalid user/password.

  After several hours of debugging, we found as patterns locked DB/user MDS and obtained BIPLATFORM / expired. This is a parameter in Oracle DB which makes patterns or users to lock after a period of time. You can use the following to unlock the accounts:

  ALTER USER MDS ACCOUNT UNLOCK;
  ALTER USER BIPLATFORM ACCOUNT UNLOCK;

  If the password has expired you make it back to the password that is used during installation. Use the following syntax:

  ALTER USER IDENTIFIED BY Admin123 MDS;
  ALTER USER BIPLATFORM IDENTIFIED BY Admin123;

  That did the trick and we were able to connect to the OBI Referral Services.

  For more information:

  http://obiee11gqna.blogspot.com/2011/09/OBIEE-11g-errors-nqserror-43113.html

  Thank you

  Deva

• Failed to start service ICS in Windows Vista.

  Original title: NSI proxy service missing

  my ICS service does not start without the NSI proxy service running, but the problem is that it is absent. is their a goes back to add it manually in the registry?

  Hi cfreeman3,

  Given that the service is missing (missing) from the list of services, allows you to uninstall and reinstall the network card and see if it works.

  Step 1:

  Uninstall the drivers from Device Manager.

  a. click on start.

  b. type devmgmt.msc in search, and then press enter.

  c. expand network card in Device Manager, right-click on the devices one by one and select Uninstall.

  d. uninstall all devices, and then restart the computer.

  Step 2:

  Log on to the computer or the device manufacturer's Web site and install the latest drivers from the network.

  Update drivers: recommended links

  I hope this helps!