fails to systemspeaker no sound

Similar Questions

• HP printer device manager! Symbol, "failed to connect" Windows Sound - still Printer Works

  Every time you start, I hear the sound of the device "Windows failed to connect.  How can I get rid of this?

  I have a printer HP of J6480 with WIn 7.  Device Manager does not recognize the printer driver.

  In Device Manager, the printer appears with the! error symbol.  No other devices have an error symbol.  The HP Solution Center and the printer work again.

  (1) I tried install fresh of the current HP software full functionality.

  (2) I tried the HP uninstaller program, through all five uninstall programs twice.

  (3) I ran CCleaner to clear the registry problems.

  (4) I tried to delete the Device Manager "Officejet! Entry J6400 series.  The Solution and the printer Center then do not work.  Apparently, the Device Manager recognizes the printer but not the driver.  I have to go to 'Programs', 'HP', then 'Officejet J6400 Series' to reinstall the software.

  (5) I tried to get the Device Manager to recognize the software.  When I click on «!» OfficeJet 6400 series', I get the message "the drivers for this device are not installed (code 28).  If I then click on 'Update Driver' and select' Browse my computer for driver software"then click on"Browse "C:\Users\Myname\Downloads", where I have the Sofware HP 13.0 full feature software and basic print and Scan Driver files, he says "Windows cannot find driver software".   If I click on "Search automatically by the driver software", I get the same message.

  I would appreciate ideas!  Thank you!

  Friendlycomputr,

  OK, if a few things stood here:

  1 windows its "cannot connect device" sounds only with a direct connection, not a network connection which is what you have. (Ethernet)

  2. have you had any other device installed on this computer is more active?

  I would like you disconnect the Ethernet connection and go below:

  1. uninstalling the printer software

  2. make a restart on the computer, when it starts, do you hear the sound "device cannot connect?

  Let me know.

• Failed to retrieve the sound for my computer

  Hi, I have a dell dimension 2400pc and accidentally deleted the sound from the PC and do not know how to retrieve and would that your help and advice please was removed by the 'remove' in the panel.i of control have also tried the option of system restore but without success... Thank you trevor

  What happened when you used the system restore?

  Sometimes the system restore will not work due
  conflicts with other software... (usually a virus
  Scanner).

  The best would be to run the system restore of
  Safe mode.

  And... the following article might be useful
  at a glance:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

• Error No.: test result sound 0x80072EFF__Direct fail step 3 (create direct sound) __0x88780078 no driver

  Error no 0x80072EFF

  Test result fail step 3 direct sound create 0 x 88780078 no driver

  Error no 0x80072EFF

  Test result fail step 3 direct sound create 0 x 88780078 no driver

  go to your sound website and download the latest version of the driver.

  can help.

• I can't get sound on my desk, he was advised to do a sound test in the Directx diagnostic tool, but I do not understand these results? It's how he interprets: -.

  Live sound results: failure at step 3 (DirectsoundCreate): HRESULT = Ox8878000a (request failed because Direct resources sound such as the level of priority were already in use by another caller).  Please could someone tell me what this means and if it can be put right. Thanks in advance.

  Possibly, you have several programs wanting to use your audio device at the same time or more than one audio device installed...

  Several things to try:

  (1) make sure that you have no other open software other than the one you want to play.

  (2) do you have embedded sound or a sound card? If this last, go into the BIOS at startup to the top and make sure that your sound edge is off

  3) update your audio device drivers

  (4) download the latest set of XP drivers froom, website of the manufacturer of your PC, or your sound device manufacturer's Web site. The completely remove/uninstall all software connected to your audio device, restart, and install your download.

  Re-post if nothing happens.

  See you soon,.

  Jerry

• NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

  I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

  I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

  A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

  I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

  Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

  ------------------
  Information System
  ------------------
  Time of this report: 07 25, 2012, 19:06:02
  Computer name: RAIDER
  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: P67A-UD3-B3
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
  Memory: RAM 8192MB
  Available OS memory: 8176MB RAM
  Page file: 2861MB used, 13487 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  -------------
  Sound Devices
  -------------
  Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: Yes
  Default voice playback: no
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  ---------------------
  Sound Capture devices
  ---------------------
  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.
  Driver name: USBAUDIO.sys
  Driver version: 6.01.7601.17514 (English)
  Driver attributes: Final retail
  Date and size: 2010-11-21 13:23:47, 109696 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: No.
  Default voice Capture: Yes
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Hello

  In Services, verify that the Windows Audio service is running and set to automatic.

  a. Click Start and type Services and press ENTER.

  (b) ensure that these services are defined accordingly.

  c. right-click the service, and then click Properties.

  According to the DXDiag, there is no default sound capture selected.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes

  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

  Capture audio by default: No.

  Default voice Capture: Yes

• BIOS update killed my Equium A210

  I installed this update to the BIOS: http://support1.toshiba-tro.de/tedd-files2/0/bios-20090624105402.zip for my PSAFJE 210 - 1as Equium and during the installiong my laptop just shut down and now whenever I try to start I just get a black screen, the lights say turned, the hard drive is on etc. but the screen is all black and I tried an external monitor but that did not work either and I also toshiba recovery CD tried and has failed.

  It sounds like a hardware failure serious BIOS is probably corrupted.
  You have updates the BIOS when the laptop was on the power supply?

• Im having trouble getting the Blizzard world of Warcraft Downloader to send the last game, tasks in my WoW folder

  The Blizzard Downloader must be used to download patches MMORPG World of Warcraft as some more small are not on the download of files and sites sites third parties with patches WoW can not be guaranteed. Ive turned off Windows Firewall, Ive even tried to create a new rule to allow port 3724 which must be open, my WoW folder is not protected and when I click on the icon to start the download I chose FUNCTIONING as administrater.

  The problem is not with my router as the downloader worked fine when I used Windows XP. The patch is stopping at 10% and then to say that it has failed. Sometimes the sound indicating there may be a firewall. (Im using Windows 7 now). I even did a trouble Shooting in my network connection

  As it looks like the source of the file is corrupted try to get the file from another source that I had that issue a couple of times on different systems of Vista where the patch would not work on 1 system but on another system of Vista

• Volume and mute keyboard keys stop working

  P7 - 1298c updated to Windows 8 Pro, everything worked but now the volume keys and mute have stop working. I know that there are related software, because if I boot a backup drive, they work again. The most obvious thing I did lately, it's remove the feature optional windows Hyper-V. Is there an obvious way to reactivate the buttons?

  Another recent change, I've had, I think that Adobe Flash player has updated.

  It seems to have solved the problem with the help of an old thread in the http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Volume-control-keys-on-keyboard-not-working/td-p/773049 area Notebook

  I uninstalled the device IDT under sound, video and game controllers in the Device Manager with option enabled, rebooted and reinstalled driver remove the last available IDT device shown to my system model and win 8 64-bit. Oddly enough, I received a message that the update failed. But the sound and the buttons seem to work fine now.

• Audio problem with Dell Latitude E6420 and Windows 8.1

  Hello community,

  I installed Windows 8.1 on my Latitude E6420 and I can get the sound to work. I installed the drivers available for Windows 8, but he doesn't play any sounds. The only thing that works continuously via a browser (e.g. youtube). When I test the device "speakers / headphones ' this is for me a"Failed to play test sound."but the"helmet of communication"device works without any problem.

  I can not activate the device "speakers / headphones" because it blocks other applications (Lync 2013) so I have to keep this option disabled.

  I look on the web for similar problems and it all points to the drivers for the video card (!)

  Is there a version of driver for this model? Or I can not use the latest version of the software in this model?

  Hello. See here for a list of Dell of the models that work with 8 and 8.1. Dell recommends not installing 8.1 on the Latitude E6420 model. Dell said 8 is correct but does not provide an audio driver IDT even for 8. I don't think that there will be provided by any Dell IDT audio driver for 8.1 since it is not recommended to install. This means that you must use the native audio driver supplied with Windows. The native driver is generic and you can usually get audio to work when using it but not all functions are working properly. All I can suggest is to find the generic audio driver in Device Manager (I don't know how it is in the list) and try to 'update' by allowing Windows to search for an update on the internet.

  Maybe someone at our Windows 8 jury can suggest an audio driver IDT, you can try to use. If you post here tell them that you already posted on the Audio card to the laptop so that they will not move your message here.

• music playback

  something has happened, I can ' hear the music from cd or usb. This has never been a problem until now. I have recently restored to original system.i have tried many options, but all have failed I have heard sounds, but nothing of cd, dvd or CD.

  can you help me?

  Locate the queue, R.click audio or video on it, select 'Open with' selection WMP.

  In addition, in WMP, go to tools, options, change the format of WMP

  Finally, if the audio and video files are a problem, go in run or cmd, type: DXDIAG run Direct X

  You can also download & run WMDiag diagnostic utility, he file WMP chks, get it from microsoft

  downloads

• BSOD at least a few times per day

  My computer is the blue screen of death at least a few times a day now, with increasing frequency. It restarts immediately after and then work as normal until the next crash. Is the code STOP: 0x0000007F (0 x 0000000000000008, 0 0000000080050031, 00000000000406F8, 0xFFFFF800036A183F). It started when I installed Spotify a week ago. I don't know if it's the source of the problem.

  I tried to restore the system to a time before I installed Spotify, but curiously it there was only one restore point and it was created a few days after the installation of Spotify. I tried to restore at this time here and the restore process has failed.

  It sounds like a another user had a similar problem here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/my-computer-crashes-and-gets-the-blue-screen-at/2d9d6c66-06f3-4926-a03d-fcb287359589 however, my computer knowledge is sufficiently advanced to see if the same thing is originally my computer down.

  Here are some details on my operating system:

  Windows 7
  Processor: Intel (r) Core i5-2500 3.30 GHz 3,60 GHz CPU
  RAM: 16 GB
  The computer is probably around the age of 6 months.
  You can view my files to dump here: http://sdrv.ms/13Xx9ew
  Is anyone able to help me identify the problem? I would really appreciate it!
  Thank you
  Isabel

  Isabel

  Only one of these two was may (the other early April) and that crash was linked to the corruption of memory.  In order to remove the RAM and find the faulty driver please run these two tests.
  
  

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.

  
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• Dell Inspiron 15R - stuck in the automatic repair loop continuous / general problems since purchase (2 weeks ago)

  Hi I bought a Dell Inspiron 15R directly from Dell 2 weeks and have had nothing but issues. The first time I turned on, I got the message "Media Audit: fail", "check the media: fail"... that sounds like a potential problem... but I thought that nothing of him, like the laptop always worked. "» Then I got the message that there is a problem with the hard drive. For the moment, I can't even connect to the laptop as it is stuck on a continuous loop on "preparing auto repair... I left for 2 hours and he keeps just loops. I have not loaded on the cell phone of any program or downloaded from any program... I literally went through the Internet a couple of times. Please can you advise what to do... it is supposed to be a new laptop? Thanks Andy

  Hi Andy,.

  My apologies for an unpleasant experience with the new laptop. Please share the exact system model as it exists several model available for Dell Inspiron 15R and operating system installed. Also, run the system diagnostics to confirm the operation of the equipment. Here are the steps:

  • Restart the system and immediately start typing on the "F12" key to enter the "Boot Menu".
  • Press the "Down arrow" to select the option 'Diagnostics '. Press the enter"" key.
  • The diagnostics begin. Please note the exact error message / code, if everything appears on the screen.

  Please answer with the information, I'll be happy to help you further.

• Problems with porting boost::regex when ranging from CS6 to CC2014 using Xcode

  I have a job in CS6 project which uses the framework boost::regex I have porting problems in CC2014.

  I wore this project using Dolly to create a new project, and then face the old files source overall, finally update the output of various dated calls to API InDesign that appeared when I compiled. For the use of regular expressions, I added the debug and release builds of the boost_regex.framework to the respective targets.

  Now, for the version new projects of CC2014 debug builds with happiness. But when I switch to the Release version I get some errors from the linker. They all have something like:

  Undefined symbols for x86_64 architecture:

  'boost::re_detail::get_mem_block()', referenced from:

  Boost::re_details:perl_matcher < __gnu_cxx::__normal_iterator < const char *, std::string >, std::allocator < boost::sub_match < __gnu_cxx::__normal_iterator < const char *, std::string > > >, < char, < char > boost::cpp_regex_traits > boost::regex:regex_traits >: find_imp() in SbRegex.o

  etc.

  I did a bit of reading through the impetus of header files. The strange thing is that the 'get_mem_block()' seems to be set for option pre processor BOOST_REGEX_NON_RECURSIVE, while in the project contains parameters for BOOST_PREPROCESSOR_DEFINITIONS BOOST_REGEX_RECURSIVE. These two parameters are mutually exclusive, and it is logical to preprocessor that blocks with both cases, defined both.

  This recursive option is used to control the use of memory when processing a regular expression, then see a call get_mem_block() (other errors of link imply a call to put_mem_block) somehow made sense being called that look like something to do with memory.

  I'm trying to understand why the debug builds, but Release version fails. This problem sound familiar to anyone? Anyone have any suggestions to try to fix it?

  Figured out how to build the project when you add the framework for regular expression of thrust.

  The key is the optimization level. When Dolly creates a project it defines the level of optimization for the Release version of "-O3". When you use boost::regex, you can only link correctly if you use the O0 and O1 optimization levels. Highest and link errors I saw appear.

  For the Release version, so I put in the Release_Cocoa64 build parameters 'Optimization level' to ' Fast [-O, O1] ' and it compiles.

• Problem setting CalcLockBlock

  I get the error message "calc Dynamics processor can not allocate more than blocks [2] heap." Please increase the CalcLockBlock setting and then try again." I know not where I would increase this setting, how much, and what are the implications.
  
  It must be when I try to convert a different currency my base for about 1,000 members currency account, with each account being translated to a beginning balance and ending balance F / X each month. When the Member of the currency, I drop the dynamic calc, I lose the error message, but I am unable to run a script to calc fixation on this member because it technically gives me the same error message
  "Error: Dynamics Processor Calc 1012704 fails to more environmentally sound management blocks [2] for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting)."
  
  Thoughts?
  
  Thank you
  Mark

  I bet it's the data cache as directed by your second error message. Otherwise, it is the dynamic cache calc.

  See: http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_dbag/dstcache.htm#dstcache1028852

  You can do a State of brain death (or is it simple) test cela by nailing a zero on the existing cache sizes (I would try first the data cache), then in restarting the Essbase db so that he could take.

  For this purpose in environmental assessments do a right-click on the db, by selecting Edit-> properties and then by changing the values in the hidden tab.

  Kind regards

  Cameron Lackpour