Failure of memory T7500 to DIMM3

Similar Questions

• Failure of memory computer format microtour HP Compaq dc5700

  My computer as shown above has the 5 beeps and 5 red LED flashes of light from the memory, indicating that it is the failure of memory. Is it possible to reset the memory locations without opening my Tower? If theres no alternative solutions, it would be very useful. Thank you!

  You must open the tower and reinstall the RAM chips, there is no adjustment.  If it happens again, your ram may be defective.

• 3097 memory failure allocating memory for the Variables

  Hello - have an old Lenovo tablet of 3 year with Windows XP. Its been performing very well. I get a message that appears randomly who says:

  3097 memory failure allocating memory for the Variables

  installedapp872 = StrSub (Apps, Start, stop-stop)

  WinBatch 32 2000

  WIL Version: 3.0cbv

  has ran a chdsk

  Reinstall the memory.

  Found nothing on Google about this message.

  I appreciate your help.

  Try R.clicking my computer, properties, advanced, performance, swap file,.

  Click Change button, with C: drive selected, the value to "let the system handle",

  2 X game, close, restart the pc.

  Also, try http://oca.microsoft.com/en/windiag.asp

  Download & run the test memory microsoft...

• Failure allocating memory on Palm handheld (4013).

  I get the above message when I try to synchronize my Tungsten T3 to my PC using intellisync.  Here is the full message.  I don't really have an idea on where to go to fix this.  Any help would be appreciated to begreatly.  Thank you!

  Failure allocating memory on Palm handheld (4013).
  Failed synchronization date Book
  -Backup db Bluetooth Trusted Devices on the file C:\Program Files\Palm\PageT\Backup\Bluetooth_Trusted_Devices.PDB
  -Save db Bluetooth Device Cache in the file C:\Program Files\Palm\PageT\Backup\Bluetooth_Device_Cache.PDB
  -Backup db preferences saved in the file C:\Program Files\Palm\PageT\Backup\Saved_Preferences.PRC
  System OK
  HotSync operation ends 22/01/09 13:17:24

  that remaining disk space is too low to be able to sync properly, especially if you have loads of data to synchronize daily. Try freeing up space by removing unwanted applications and games on your device.

  Message is about: Treo 680 (unlocked GSM)

• Failure of memory HP Pavilion dv4

  My laptop has an ID of VP018AV or BAV

  ID MOFM7X-53A6JX-XD7U2J-400203 MEMORY FAILURE

  How to identify the defective memory module?  I have any irregular operation - occasional blue screen takes a long time to start and slow response. Having trouble with the recognition of fingerprints.  Request frequent for the disk check - with no failure in the disk check

  Hello

  Please find the link given below might help you solve your problem. As I see you have 2 memory Slot on your device, check how many memory chip is installed on your device & try 1 memory in the location to find out what memory went bad. Checked the page number 4-9 Maintenance and Service of Guide for the resettlement of the part.

  Manual link

• Pavilion dv6: failure of memory, help!

  Hello world

  I had some memory problems lately, including many blue screens with 'MEMORY MANAGEMENT' listed as the problem. I ran a test of memory by pressing F10 at startup for the area of memory and the test failed in about 2 seconds after the start. I got the following information:

  Failure ID: RGFTMU-5MN7K3-MFP556-406903

  Product ID: LW260UAR #ABA

  According to me, one of my chips of memory is damaged, but I do not know how to access physically to replace. Help, please!

  It's 2 GB 1333 MHZ PC3 - 10600 DDR3 SDRAM SODIMM

  You can replace it with a 4 gig of same type and speed. East - another module the same? The only thing you lose by mixing module sizes is operation "dual channel" which is a bit faster and lose would be a compromise to have more RAM.

  It would be a like kind replacement:

  http://www.eBay.com/ITM/like/231033893993?lpid=82&CHN=PS

  That would be an upgrade to a 4 GB module.

  http://www.eBay.com/ITM/4GB-DDR3-1333-MHz-PC3-10600-single-stick-SODIMM-laptop-notebook-RAM-memory-204p-/361150227991?PT=LH_DefaultDomain_0&hash=item54163b2617

  You don't want to try to stay with the same density memory; that is 4 blocks on one side. It's a little unusual for HP high density (4 blocks) RAM in their laptops, it is usually 8 block or low density. That's why I'm asking if the other module is the same.

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• CVI8.5 crashes with failure 'insufficient memory' after compilation

  Hello

  I used the 8.5 CVI to compile my project in debug mode.

  Before the last my latest changes short I could run the project without any problems.

  Now after beeing ready with the compilation nothing happens for awhile, then ICB crashes and an 'insufficient memory' message appears, sometimes a "a reminder of custom control triggered an exception" message.

  I noticed that in the moment just before the output of cams message memory the size of memory used virual windows goes suddenly to 2.86 GB.

  The pc has 2 GB of physical memory and 6 GB of virtual memory, at the same time is available free memory.

  If I change the debug to zero level, the software is functioning normally, so I think that there is no failure in the code.

  What is the problem?

  Hello JR,.

  Thanks for your message, you're totally right!

  After that I added a few features the problem had disappeared.

  The failure seems to be fixed in CVI 9.0, because the project has worked without adding features.

  I tried with different keyword in the forum, but I have not found this answer.

  Maybe it was the problem in finding that the theme of the threat has nothing to do with my problem.

  Thank you

  Torsten

  Solution of the top link (another Thread) as information to third parties:

  ================================================================================================================================================================

  Posted by LuisG, proven Active veteran, 19/11/2008 18:33

  Hi Trevor,

  Thank you for the presentation of your test program. I was able to reproduce the 'out of memory' you were see and so I investigated this problem first. I'll try to tackle the problem of the acquisition of data/timer tomorrow.

  I confirm that this is a bug in CVI which was previously unknown - and which has been around for a long time, without being detected. The conditions that cause this bug manifest itself are extremely rare, but you were still 'chance' to replicate. Fortunately, there's a pretty easy fix that you can do which should make these conditions disappear.

  The problem occurs when, at some point during the connection phase, an internal memory allocation is requested for a list of the imported symbols, if the list size is between symbols 8187 and 8189. In the case of your project, it happened to be 8188. This list includes all the symbols that your project defines and also imports from all libraries (including the CVI libraries) associated with the project. It turns out when you added the new source file, the total came to be 8188. It depended entirely on what is in your project, of course, but also on the specific version of the CVI, you use.

  A workaround is to add some free in your source file functions, such as the total number of symbols will change. For example, I added the following code to myAsyncTimer.c, which was enough to no longer trigger the bug:

  void foo (Sub)
  {
  }
  foo1 Sub (Sub)
  {
  }
  foo2 Sub (Sub)
  {
  }
  void foo3 (void)
  {
  }
  void foo4 (void)
  {
  }
  void foo5 (void)
  {
  }

  I'm still sorry for the double trouble. I will then consider the other problem, and I'll let know you when I have more information.

  Luis

  ================================================================================================================================================================

• HP Pavilion DV71-4100 Memory Module failure

  Hello

  My product is a HP Pavilion laptop as follows:

  Product: ww181av

  Model: DV71-4100

  Series: [personal information]

  My phone worked terribly slow and I thought I had a virus.  Analyses have shown that I have not.  I ran HP diagnostics and came with a memory Module failure with the following information:

  Failure ID: m89jxt-5A76KO(or 0)-xdOO(or 00) 2 k-4o(or 0) 2eO (or 0) 3

  Part ID: 181AV

  Sorry for the question O/0.  I don't know if this is o or zeros.

  Is it a simple part replacement (IE a chip memory) and if so can I order and install myself?  Or is it something I need to take to an HP repair center in THE West somewhere (assuming there is one)?  An idea of the cost?

  Thank you!

  [Personal information]

  Hello:

  You should be able to do the replacement yourself. This is a great do it yourself project for the first time.

  The first thing you need to do is to determine which module of memory is bad (if your laptop has two modules are installed, and many of them do).

  I use a very technical but very effective method to determine which.

  First remove the a/c and battery power (always do when you work inside the laptop).

  Remove one of the memory modules. I leave the battery, then plug the power of a/c.

  Turn on the PC. If it starts, and that you do not get the failure error memory then you were lucky and found the bad chip on the first try.

  If it does not start or if you get an error, turn off the PC, unplug the unit, remove the bad chip and replace it with the first one you removed. The PC should now start and run OK.

  So, now that you have found the bad chip, you must know how much GB is. Normally, it's on the sticker.

  Just buy the same chip memory size with the same characteristics.

  You need a DDR3 PC3-10600 memory module.

  If you let me know which module of memory of size you need (2 GB, 4 GB), I'll post a link to a site that sells the memory at low prices.

  Depending on which chip the size you need, replacement costs must not exceed $40,00.

  Here is the link to the service manual for your laptop.

  The memory of the removal and replacement procedures are given in Chapter 4.

  http://h10032.www1.HP.com/CTG/manual/c02666747.PDF

• Memory 6c7u5q-5s96t3-qfph4k-401203 failure

  Hello
  My laptop cannot start. After a lot of blue screens, I tried to test my drive and memory. Test Drive was ok, but the memory test showed a failure, error: failure of memory 6c7u5q-5s96t3-qfph4k-401203.

  Will be solved this problem if I replace with a new memory?

  Thank you in advance for your help!

  Hello

  You are welcome

  As you are under warranty, if you contact HP with the error code of 24 characters, they will have to replace the module.

  Best regards

  DP - K

• DV7 (4073nr) memory upgrade problems...

  I've tried so my RAM from 4 GB to 8 GB.  I have a DV7 4073nr, and I just downloaded the latest update of the BIOS (F.29).  My system starts but I get intermittent BSOD.  Not funny.  I ran the system diagnostics and I get failures of memory in the memory Test option and the system developed, but it passes the test of the BIOS (F10) and all of the submissions are recognized by the BIOS and Windows.

  For all this, I don't think it's the memory...  I have two sets of sticks of 8 GB (2x4gb) where I worked with, Crucial and Kingston.  Two are speed 1333 (10600), and identical to the specifications proposed by the Crucial.com site.

  Any thoughts?

  Thanks in advance

  Well...

  I don't think I'm quite out of the woods yet.  Last night, I booted up and got a BSOD on trying to open Internet Explorer (v.9).  Rebooted my system and it worked without incident through the rest of the evening.

  Until I stop, I put Norton 360 to run its set of scans and tasks, a weekly process and let it run.  This morning, there is no other incident, but I can't help thinking that the system seems slow.

  I'll call this request closed for the moment.  I was thinking about an SSD as the next update, but now I'm reconsidering.

  Oh well, thanks for your help,.

• Problems of memory on the Satellite L30-101

  I have a toshiba satellite l30-101 laptop and wanted to upgrade the RAM, so I bought 2 x 1 GB sticks to put in it.
  Now, I could not find all those at 533 mhz so I bought 2 667 mhz after a talk to a technical guy who said if I had 2 the same speed it will work very well.

  Only this isn't at all that I can put a stick and it works very well with the 533 mhz.
  The one I have in if I try to put the two sticks in it comes up with errors of memory and I get the bsod that restarts my computer and did not get my games or other programs.
  Is anyway to make sure I can have both new sticks in that I really need RAM and do not want to buy different ones.
  I mean if I can get another one we should probably work well work?

  Please help im crazy trying to solve this shit

  Hello

  I think that the speed of the memory has nothing to do with the BSOD!
  In my opinion the BSOD appears due to the failure of memory!

  In addition the L30-101 supports only the FSB 533 Mhz. In this case you will not be able to run the 667 Mhz modules of memory at full speed.
  The modules will run at 533 Mhz only!

  So in my opinion, you must replace the defective module with one that works very well!

  Best regards

• Problem of memory HP Pavilion dv6-3208TX

  I would like to get advice for my laptop. A few days before my phone starts to become slow and it becomes too irritable to exploit. So, I did the Test of memory that failed with an ID of Menory failure in memory Slot 2. Therefore, I made a few trouble shooting mannual and removed 1 GB of RAM which has failed the Test of memory. Now my laptop runs on 2 GB of RAM only. However, it is slow, so I need to upgrade.

  But the problem is with the frequency as the old RAM installed runs 1067 Mhz(2GB) and that I walked on 1333 Mhz(4GB). So I would like to know what is it possible to simultaneously install the 1333 Mhz RAM with 1067 Mhz RAM.

  This is going to affect the speed or I will get a good speed?

  The name of RAM - Kingston - KTH - X3B / 4G (which is what I want to install instead of 1 GB)

  HP Pavilion dv6-3208TX laptop

  OS - Windows 7 Home Basic (64-bit)

  Product no.-LK364PA #ACJ

  Waiting for response.

  Now, don't confuse everything.

  The performance of your laptop will be positively increase if you switch from 2 GB to 6 GB or even 4 GB of RAM.

  According to the manual, 1333 MHz RAM should also work on your laptop, but it will work with a frequency of 1066 MHz RAM according to the manual.

  If the RAM you buy would work in your laptop - you have to really load and see, unless you go for the exact HP pay number in the manual, which you whatever it is, have not the possibility to buy them also that the part is not made now it seems that - in the store part.

  But you can try the Kingston RAM you mentioned, I think it'll work.

  Concerning

  Visruth

• FAILURE ID U0FXJX - 5T 7703 - XD6V4K - 60XC03 short DST pavilion dm4

  I use Windows 7.  The laptop never completely loads windows.  The mouse is still usable, but nothing appears on the screen.  I ran the system diagnostics and got a startup and memory test failure.  Memory failure ID is U0FXJX5T7703-XD6V4K-407403.

  I tried to boot with recovery disks and get the same problem - Windows does not completely load.

  Hello

  If the error code 24 characters has been generated by the short drive Self Test (DST) this would indicate that hard is defective and must be replaced.  This corresponds also to the issue of marketing and the impossibility of reinstalling the OS.

  If your laptop is still under warranty, contact HP (with the error code 24 characters) and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• ID Q4PPKR-5GN702-9XL02K-60SS03 failure

  I'm helping my daughter with her laptop HP - G72 - b57CL, which has Windows 7 Home premium installed.

  I ran the Diagnostic tests and received the ID:Q4PPKR - 5GN702-9XL02K-60SS03 failure

  It was a problem starting. I can boot into safe mode, but it crashes during normal startup after I connect.

  Hello:

  Was it a failure of memory ID or the hard drive?

  If the hard drive, it must be replaced.

  If the memory, you need to determine which module is bad, if the laptop is more than a memory chip.

  The memory defective bar must be replaced.

• After the effect CC 2015 - KERNEL_SECURITY_CHECK_FAILURE (memory dump)

  Hello

  As is obvious, I had a problem after installation of AE and it gives me a blue screen with a message above (KERNEL_SECURITY_CHECK_FAILURE). It seems that there is a failure of memory between AE and another software or driver. So I analyzed Memory.DMP file with WinDbg and gave me a result below.

  As you can see, I discovered, file dxgkrnl.sys with AEGPUSniffer.e process of do a memory crash. I have to say befor installation AE I uninstalled drivers for my graphics card (Geforce and Intell) and installed a pilot seller directly but AE has a problem with DirectX. (my edition of DirectX is 12)

  
  

  Here is the Configuration of my system:

  
  

  Laptop: HP with a UEFI Firmware (start secure power off)
  

  Windows 10 edition 10586

  RAM: 16 GB

  Graphics cards: Intel internal (1 GB) and dedicated Geforce GTX (4 GB)
  

  CPU: 2.3 GH core i7 (quad core and 8 logical processors)

  HARD DRIVE: 1 TB

  All drivers up to date

  
  

  Well, any help will be appreciated. If there is no any way to make it correct, can I do it just with a new edition of EI or will be the same?
  

  
  

  
  

  Debug version of Microsoft Windows (R) 10.0.10586.567 X 86

  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Babak\Desktop\MEMORY. DMP]

  The Bitmap core dump file: the kernel address space is available, the user address space will be may not be not available.

  Symbol search path is: srv *.

  Executable search path is:

  Windows Kernel Version 10586 MP (8 procs) free x 64 10

  Product: WinNt, suite: TerminalServer SingleUserTS

  By: 10586.17.amd64fre.th2_release.151121 - 2308

  Computer name:

  Core = 0xfffff802 '6fa00000 PsLoadedModuleList = 0xfffff802' 6fcdec70

  The debugging session: killed Dec 29 01:11:09.512 2015 (UTC + 08:00)

  System Uptime: 0 days 0:00:54.331

  Loading the kernel symbols

  ........................................................... Page 105d4a not present in the dump file. Type ".hh dbgerr004" for more details

  ....

  ................................................................

  .................................................

  Loading user symbols

  PEB is paginated on (Peb.Ldr = 00000000' 002e2018).  Type ".hh dbgerr001" for more details

  Loading unloaded module list

  .........

  *******************************************************************************

  *                                                                            *

  * Bugcheck analysis *.

  *                                                                            *

  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 139, {3, ffffd00024267490, ffffd000242673e8, 0}

  Page 11b 860 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 110e88 not present in the dump file. Type ".hh dbgerr004" for more details

  110515 page not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Probably caused by: dxgkrnl.sys (dxgkrnl! DXGDEVICE::DestroyAllDeviceState + 1cb)

  Follow-up: MachineOwner

  ---------

  7: kd >! analyze - v

  *******************************************************************************

  *                                                                            *

  * Bugcheck analysis *.

  *                                                                            *

  *******************************************************************************

  KERNEL_SECURITY_CHECK_FAILURE (139)

  A core component has damaged a critical data structure.  Corruption

  could potentially allow a malicious user to take control of this machine.

  Arguments:

  Arg1: 0000000000000003, a LIST_ENTRY has been corrupted (i.e. double deletion).

  Arg2: ffffd00024267490, the address of the frame of trap for the exception that caused the error checking

  Arg3: ffffd000242673e8, address of the exception record for the exception that caused the error checking

  Arg4: 0000000000000000, reserved

  Debugging information:

  ------------------

  110515 page not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  DUMP_CLASS: 1

  DUMP_QUALIFIER: 401

  BUILD_VERSION_STRING: 10586.17.amd64fre.th2_release.151121 - 2308

  SYSTEM_MANUFACTURER: Hewlett-Packard

  SYSTEM_PRODUCT_NAME: HP ENVY 15 Notebook PC

  SYSTEM_SKU: K8U61PA #UUF

  SYSTEM_VERSION: 097F120000405F10000310100

  BIOS_VENDOR: Insyde

  BIOS_VERSION: F.22

  BIOS_DATE: 25/11/2014

  BASEBOARD_MANUFACTURER: Hewlett-Packard

  BASEBOARD_PRODUCT: A 22-0

  BASEBOARD_VERSION: KBC Version 83.12

  DUMP_TYPE: 1

  BUGCHECK_P1: 3

  BUGCHECK_P2: ffffd00024267490

  BUGCHECK_P3: ffffd000242673e8

  BUGCHECK_P4: 0

  TRAP_FRAME: ffffd00024267490-(.trap 0xffffd00024267490)

  NOTE: The frame trap does contain not all registers.

  Some registry values can be set to zero or incorrect.

  Rax = ffffe0017d079730 rbx = 0000000000000000 rcx = 0000000000000003

  RDX = ffffe0017d045890 rsi = 0000000000000000 rdi = 0000000000000000

  RIP = fffff8026fb59d82 rsp = ffffd00024267620 rbp = ffffd00024267729

  R8 = ffffc001f8dfe3f0 r9 = 0000000000000003 r10 = 7fffc001f8dfe3f0

  R11 = 7ffffffffffffffc r12 = 0000000000000000 r13 = 0000000000000000

  R14 = 0000000000000000 r15 = 0000000000000000

  iopl = 0 nv up ei pl nz na po cy

  NT! : FNODOBFM: 'string' + 0x8c82:

  fffff802'6fb59d82 cd29 int h 29

  Reset the default scope

  EXCEPTION_RECORD: ffffd000242673e8-(.exr 0xffffd000242673e8)

  ExceptionAddress: fffff8026fb59d82 (nt! FNODOBFM: 'string' + 0x0000000000008c82)

  ExceptionCode: c0000409 (security check failure or stack of saturation of buffer)

  ExceptionFlags: 00000001

  NumberParameters: 1

  Parameter [0]: 0000000000000003

  Sub-code: 0 x 3 FAST_FAIL_CORRUPT_LIST_ENTRY

  CPU_COUNT: 8

  CPU_MHZ: 8f7

  CPU_VENDOR: GenuineIntel

  CPU_FAMILY: 6

  CPU_MODEL: 3 c

  CPU_STEPPING: 3

  CPU_MICROCODE: 6, 3 c, 3, 0 (F, M, S, R) GIS: 1st ' 00000000 (cache) 1 ' 00000000 (init)

  DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT

  BUGCHECK_STR: 0 X 139

  Nom_processus: AEGPUSniffer.e

  CURRENT_IRQL: 2

  Error_code: (NTSTATUS) 0xc0000409 - the system detected an in this application the stack-based buffer overflow. This overrun could could allow a malicious user to take control of this application.

  EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - the system detected an in this application the stack-based buffer overflow. This overrun could could allow a malicious user to take control of this application.

  EXCEPTION_CODE_STR: c0000409

  EXCEPTION_PARAMETER1: 0000000000000003

  ANALYSIS_SESSION_HOST: HP-ENVY15

  ANALYSIS_SESSION_TIME: 29/12/2015 17:10:58.0743

  ANALYSIS_VERSION: 10.0.10586.567 x86fre

  LAST_CONTROL_TRANSFER: from fffff8026fb4d2e9 to fffff8026fb42760

  STACK_TEXT:

  ' ffffd000 ' 24267168 fffff802' 6fb4d2e9: 00000000'00000139 00000000'00000003 ffffd000 ' 24267490 ffffd000 ' 242673e8: nt! KeBugCheckEx

  ' ffffd000 ' 24267170 fffff802' 6fb4d610: 00000000 ' fffff802 00000000 ' 6fa3272f 00000000'00000000 00000000'00000000: nt! KiBugCheckDispatch + 0 x 69

  ffffd000 '242672b 0 fffff802' 6fb4c7f3: ffffe001 '7b2bf010 ffffe001' 7b2bf010 00000000 00000000' ffffe001 7 d 168270: nt! KiFastFailDispatch + 0xd0

  ffffd000 ' 24267490 fffff802' 6fb59d82: ffffc001 'f8dfe330 ffffc001' f8dfe3f0 00000000'00000000 00000000'00000000: nt! KiRaiseSecurityCheckFailure + 0xf3

  ' ffffd000 ' 24267620 fffff801' 4871147 b: ffffc001 ' ffffc001 00000000 'f7a6e010 ffffc001' f7a6e100 ffffc001 ' f7a6e100: nt! : FNODOBFM: 'string' + 0x8c82

  ffffd000 ' 24267650 fffff801' 48710653: ffffc001'f7a6e010 00000000'00000000 00000000' 0000000b 00000000 00000000': dxgkrnl! DXGDEVICE::DestroyAllDeviceState + 0x1cb

  ffffd000 ' 24267690 fffff801' 486f3717: ffffc001 ' f7a6e010 ffffc001 'f8dfe330 ffffc001' f8dfe330 ffffe001 ' 7cf74080: dxgkrnl! ADAPTER_RENDER::DestroyDevice + 0xa7

  "' ffffd000 ' 242676 c 0 fffff801 ' 486f00b4: 00000000 ' 00000100 ffffc001 'f8dfe330 ffffc001' f8dfe330 fffff960 ' c5492d90: dxgkrnl! DXGPROCESS: destroy + 0x2bf

  ffffd000 ' 24267790 fffff960' c53b6c9c: 00000000' 00001cb0 fffff901'407 a 3730 00000000 '00000007 00000000' 00000000: dxgkrnl! DxgkProcessCallout + 0 x 64

  ffffd000 '242677f0 fffff960' c5035cb9: fffff901'407 has 3730 fffff901 '407-3730 ffffe001' 7b72c080 00000000 00000001': win32kbase! GdiProcessCallout + 0x8c

  ffffd000 ' 24267870 fffff960' c53d08cb: ffffd000'24267 has 48 ffffd000 242679 c 0 00000000'00000000 00000000'00000007: win32kfull! W32pProcessCallout + 0xd9

  ' ffffd000 '242678-0 fffff802' 6fdfc262: ffffd000 ' 242679 c 0 ffffe001 ' 7b3e42b0 00000000'00000000 00000000'00000000: win32kbase! W32CalloutDispatch + 0x6b

  ffffd000 ' 24267910 fffff802' 6fe06ddf: ffffe001 '7b3e42b0 00000000'00000000 00000000'00000000 ffffe001' 7b72c080: nt! PsInvokeWin32Callout + 0x42

  ' ffffd000 ' 24267950 fffff802' 6fe812f2: ffffe001 ' 00000007 ffffe001 '7cf74080 ffffe001' 7cf74080 ffffe001 ' 7b72c080: nt! PspExitThread + 0x49b

  ffffd000 '24267-90 fffff802' 6fb4cfa3: ffffe001 ' 7cf74080 ffffe001 '7b72c080 ffffd000' 24267b 80 ffffd000 ' 24267b 80: nt! NtTerminateProcess + 0xde

  ffffd000'24267 b 00 00007ff8'14085364: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceCopyEnd + 0x13

  00000000' 0014fd98 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x00007ff8'14085364

  STACK_COMMAND: kb

  THREAD_SHA1_HASH_MOD_FUNC: a0a5514a4d87706527c6f92c37842ea8c43b81ac

  THREAD_SHA1_HASH_MOD_FUNC_OFFSET: 11718e5c925d2d833f63315284a04f89616e7880

  THREAD_SHA1_HASH_MOD: c9f3f8c71ac99eb021b386cc891dde1c61018273

  FOLLOWUP_IP:

  dxgkrnl! DXGDEVICE::DestroyAllDeviceState + 1cb

  fffff801'4871147 b 488b4b50 mov rcx, qword ptr [rbx + h 50]

  FAULT_INSTR_CODE: 504b8b48

  SYMBOL_STACK_INDEX: 5

  SYMBOL_NAME: dxgkrnl! DXGDEVICE::DestroyAllDeviceState + 1cb

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: dxgkrnl

  Nom_image: dxgkrnl.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5632d 261

  BUCKET_ID_FUNC_OFFSET: 1cb

  FAILURE_BUCKET_ID: 0x139_3_dxgkrnl! DXGDEVICE::DestroyAllDeviceState

  BUCKET_ID: 0x139_3_dxgkrnl! DXGDEVICE::DestroyAllDeviceState

  PRIMARY_PROBLEM_CLASS: 0x139_3_dxgkrnl! DXGDEVICE::DestroyAllDeviceState

  TARGET_TIME: 2015-12 - 28 T 17: 11:09.000Z

  OSBUILD: 10586

  OSSERVICEPACK: 0

  SERVICEPACK_NUMBER: 0

  OS_REVISION: 0

  SUITE_MASK: 272

  PRODUCT_TYPE: 1

  OSPLATFORM_TYPE: x 64

  OSNAME: Windows 10

  OSEDITION: Windows 10 WinNt TerminalServer SingleUserTS

  OS_LOCALE:

  USER_LCID: 0

  OSBUILD_TIMESTAMP: 2015-11-22 17:24:24

  BUILDDATESTAMP_STR: 151121-2308

  BUILDLAB_STR: th2_release

  BUILDOSVER_STR: 10.0.10586.17.amd64fre.th2_release.151121 - 2308

  ANALYSIS_SESSION_ELAPSED_TIME: 25 c 0

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x139_3_dxgkrnl! dxgdevice::destroyalldevicestate

  FAILURE_ID_HASH: {070f1ec5-2412-7644-8cb9-60ac33a7233f}

  Follow-up: MachineOwner

  ---------

  I thought about it! After rolling back to the previous edition of Geforce driver the problem disappeared