Failure of printer Touchsmart 6510

Similar Questions

• HP 2420d Watch filter failure after printing is operated

  I have a HP laserjet 2420d B & W printer, and after the upgrade to El Capitan it does not print. It gives me an error message - failure of the filter. I did everything possible. ???

  OS X El Capitan: reset the printing system

• option to print Photosmart 6510 not highlighted

  With windows 7, I can print when you use Word, but if I want to print the e-mail or the internet, I can only do on my ophotosmart 6510 first economy on the desktop. Economy option is available, but there is no response from the printing option is gray. These are the only 2 options offer

  Hello plg4,

  Welcome to the Forums of HP Support!

  I see that, when you try to print from the Internet or by e-mail, you are only able to save. I would like that you try to run the HP print and Scan Doctor. This should clear up the questions, let me know the results.

  Kind regards

• Cannot control printer HP 6510 directly from the computer

  I use the HP - 6510 B222a printer and used to be able to control all functions directly from the computer.  All options would appear in a window allowing me to select an assignment (printing, scanning, etc.).  All of a sudden, this option disappeared and now I can only control functions of the printer from the small screen on the printer itself.  Can someone help me with this problem?  I wish I could go back to control everything directly from the computer.  In addition, there is no way to determine the levels of ink on the computer screen.  Thanks for your help.

  Hello

  Reinstall the full feature software and driver on your computer can help. You can download from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&DLC=en&product=5058336

  (Note: B222a and B221a use the same driver).

  Kind regards.

• I have printer HP 6510 Series, how to scan to e-mail

  I have a printer all-in-one HP 6510. How to make an address book and then scan to an email address?

  Hi auntie_vee,

  I see you want to set up an address book and scan to e-mail for the printer.
  I'll be happy to help you.

  Here is a document that allows you to browse the HP software to email. Select your operating system. Select how to scan with the HP software, then how the scan to e-mail.

  Scan.

  Of the printer, you have the option to scan from the printer to the computer and scan on the memory card.

  How to perform a scan: from the control panel.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great day.

• MacBook Pro cannot find a printer HP 6510 two reflect connected to wi - fi

  HP all-in-One 6510... order print a few days ago... have restarted several times... wi - fi signal icon reflects connected, MacBook Pro is connected, but not him is not... problem only started a few days ago... no problem previously

  Hello and Yes, after having tried a number of things the printer works.  I had gone to the IP address and that seemed to do the trick.  However, I did not know it this afternoon when he began to print "spontaneously".  I guess just really a lot of time for the computer and the printer to reconcile with each other.  I don't know what did the printer get first place, I had not done any changes to the system to each device.

  It has been a learning experience and expand my knowledge.

  Thank you very much for your answer!

• Print borderless 6510 photosmat drivers (filename: PS6510_1513, 63 237 KB) are on my printer, but do not offer Windows 8 (x 64) print menu

  Drivers HP 6510 Photosmat borderless printing (file name: PS6510_1513, 63 237 KB) are on my printer, but the option for borderless printing is not available in the menu print Windows 8 (x 64). How can I get the option to print borderless added to my image of Windows 8 (eg. 4 X 6, 5 X 7, etc.) color prints on photographic paper?

  Hi, Windows will load the drivers only base and generic. You must uninstall all of these drivers and install the most recent on the HP site.

• Failure to print black on C309a

  I have a Premium Photosmart C309a multifunction printer that does not print black ink.  I replaced the cartridge with the new HP cartridges twice without success.  I cleaned the heads, checked to clog ports to purchase and print samples without result.  Can someone help me diagnose the problem to resolution?

  If the steps of troubleshooting in this document has not resolved the problem (and it seems you already have these) can help post it here.

• Sudden failure to print photos in color (only photos)

  Operating a HP Photosmart C309g printer with OS Windows 7 64 - bit.

  Have printed several color photos, but suddenly will be only black and white printing.  Ordinary color scanning and printing is fine - just photos.

  Through a series of normal printing windows that display the image in color until the very last print statement when the picture goes to black and white.

  Verification of diagnosis on the printer shows all ok

  Tim, I would re - install the software that gives you problems.

• OfficeJet 6600: Failure of printer, no error code

  Down printer, no code error.  Tried troubleshooting tips; Reset no has not worked and cleaning of copper on the ink cartridges, not working anymore.   Printer 3 years so out of warranty.   This printer is in a holiday home and I remove the cartridges in the winter.  Is this a problem?  Is there anything else to try, or do I need a new printer?  Tried to submit the form to contact HP 3 times for nothing helped... the site could use improvement.

  Remove the cartridges to store the printer for the winter is a major problem - which cause the printhead not replaceable to dry out, leaving probably clogged ink residues.  In the future if you have a printer with separate ink supply and print (like the Officejet 6600) heads the cartrdiges never be removed from the printer for more than thirty minutes at a time, and the printer should never be put off with the cartridges removed.

  The following may help recover the printhead (maybe 10% chance).  Turn on the printer, remove the cartrdiges impression and drip hot water on the screens on the print head which would connect the ink cartridges.  I put about 3 to 5 drops in each screen.  Let it sit for a few minutes, then replace the ink cartridges.  Run three cleaning cycles in quick succession the façade or the Toolbox.  Is there an ink at all on the page?  If yes let the printer sit overnight, then repeat the process.

• 6510 all-in-one printer 211: 6510 has suddenly paper jams paper

  Paper jams are continuous. The upper part of each leaf has a 1/6 "dent about 1/2" long and 3-4 "on the side. Another paper has same type of damage. Will be removed all paper crowded at the top of the machine. Decided that there must be a mechanical problem and removed the 7 screws of the plastic on the bottom clamp to remove the bowl. When he was abducted some plastic black 11/16 "long with a 7/16 diameter gear on each end is out. The tree has a hole inside had to an axle. I sought visible signs where it may be at the bottom without success. I need advice before I go into it any further.  Thanks in advance for any help.

  Hello

  IAM afraid, you may need to replace the printer.

  Call HP Tech Support 1-800-474-6836 (USA)

  If your printer's warranty, you can be equipped with options of recovery.

• HP 6310xi - failure of printer using Windows 8.1

  I just received a computer Windows 8.1 and downloaded and installed the last set of drivers from the HP website.

  Whenever I try to print a document, I get the following error message in a block of error on the screen:

  "Print on the HP 6300 Series - the printer error couldn't print PQTestPage.png".

  The printer prints the part of the document, but not all, and I still get a blank sheet of paper printed before prints part document.

  I tried your HPPSdr.exe and have removed and reinstalled the drivers of printer from your web site.

  Do you have any idea what I could then try to solve the problem?

  Thank you.

  WayneJ3

  I did a complete reinstall of Windows 8.1, and I'm still getting the problem with drivers for the printer HP 6310xi are not installed, due to an error in the SETUP of HP is not properly work.

  I won't try any more things with this problem, you can close is and mark it as "any Solution Found.

  Thank you.

• HP Envy 4500: failure to print

  The printer is out of warranty, but less than two years. I just replaced both ink cartridges, using HP ones. The alignment test was OK, but the printer now prints in color, only not in black. It was working fine last time I used it before replacing the ink cartridges.  I tried self help the doctor print and scan without success; This figure includes cleaning of the printheads.  None of the FAQ seem to tackle the problem exactly.

  Link checked, works very well.

• HP photosmart 7525: failure to print

  I can't print a document.   The system default Telec.

  The first thing I would check is what is defined as the default printing device.

  If you run Windows 7 tries to start devices and printers and when the Printers window is open see which device has the check mark green on top of it.

  If the fax has the green check mark, then make a right click on the printer that you want to be the default device, and then select set as default on the menu that appears.

  If my post is solved your problem, please click button solution under head-considered. To thank a technician for a post, click the thumb button up under the post and give them some pictures. You can even click on the two buttons, technicians like him.

• laptop Pavilion 17: failure to print from pc

  I have problems printing from my pc to a printer, and I can't find the reason why. I downloaded a pdf file and although the preview looks excellent when I try to print the file, only a corner of a page is displayed and the text is broad and fuzzy... I tried all the usual things, but I don't get the case. Can anyone help please.

  Hello

  My opologies for the delay in the presentation of this response, I was down with a disease of winter. Your suggestion that the fault may be in PDF file proved to be correct, because I contacted the sender who confirmed that there was a security lock in the file that freeing needed... Too bad that there is no indication of that in the original e-mail, there all we saved a lot of trouble.

  On the other hand, I don't would not have introduced you nice people out there I.

  Once again, many thanks to you all

  Kind regards