Conversion of digital cluster problem

Similar Questions

• Officejet pro 8600 digital fax problem

  Implementation has gone well, the new computer.  Met an acknowledgment of digital fax problem and somehow disabled.  Now the incoming fax print rather than stored as digital faxes.

  Help instructions are wrong.  You will need to re - turn on the digital backup function.  Help please!

  Windows 7, Lenovo thinkpad, using the USB connection.

  Hi @PennyDog1 ,

  Thank you for taking time in your day to ask this question on the HP Forums today!

  From your post, I can understand you have problems, get the set-up again digital fax.

  Here is a step by step guide to help out you! Setting up digital fax HP to save received faxes on your computer

  Let me know if it helps.

• Digital recorder problems Toshiba HDR5010KB

  Ive been happy with my digital recorder HDR5010KB so far.

  Some problems occurred:

  (1) on the playback of recordings, the image seems to freeze image and then jump to catch up with the audio.

  (2) the recorder fails to record programs when the recorder is in standby mode. (program than a single clock set - if theres no program conflicts etc.).

  Ive reformat the drive, updated the software (from download Toshiba) and I did a reset of box of manufacturing and the problems are still there.

  Any ideas on how to fix cela - or will it be a case of back to Toshiba warranty?

  Thank you very much!

  Hey dude

  It comes to portable systems from Toshiba, the options and the accessories forum.
  I don t think that someone might be able to help here in this community.

  I recommend you to contact your dealer for recommendation... maybe guarantee would cover this issue...

• Digital output problem

  Well, I thought I had everything figured out, but we have finally had time to go to our lab and test it and there seems to be a problem with the output digital here.  I'll look at what's the point of this VI, then describe the problem

  Analog input is entered and analyzed as digital outpt is sent several lines (3).  The digital output is used to send a single, user‑defined delayed pulse TTL with other instruments like triggers.  I put this program to create an array of digital waveforms for each channel, each of them are of the same length as the analog input.  '1' is inserted in the appropriate place in the table, in lieu of a value of '0', creating the required table.  This table would be written on a digital line (1 channel, samples of N).  Three of these subVIs are used here, so three signals various tables are created and writtin in its respective lines when the program runs, the analog input seems to work very well, but that a single digital output is executed.  I need all three lines to write simultaneously.

  I use a USB-6221 with LabView 8.2

  I have attached all the files needed to run this program, and if the 'LabView programs' folder is saved on the C drive, I think that the paths of the files must be correct.

  Thanks in advance

  Hi Chris,

  Hello and I hope that your well today.

  Thanks for your updates.

  I think that my being better if we start from the beginning.

  1 could you try the example Correlated Dig writing with Counter.vi from the Finder of example of NOR?

  It produces output meter as the time base for the digital output - to get clocked at digital output. Don't you see the waveform being printed on your outings that match the graph of digital waveform on the front panel?

  If not, try to use one of the other examples, as Scripture Dig Port - this is a single VI just to send a single value for each digital line. If this does not work, there is a connection problem.

  2. If we got this far without problems, then the next part would be to change the waveform so that you could write the data that you want to...

  The digital waveforms can be made a boolean table, then using the array of Boolean DWDT to Digital.VI to convert into the type of digital waveforms. The waveform will have X number of samples. Therefore, at each clock pulse, you will produce 1 sample on each channel. So if you set the rate for 1000 and the number of points to 1000 (samples) it will display the waveform on a second. (as his continuous the DAQmx will make a loop through the buffer and start out of the waveform again).

  Note, have you seen the palette of digital waveforms? It is located under waveforms and has more vi like the Boolean DWDT to digital.

  Please let me know how you go.

• Mapping of LUNS ESX - id scsi is not consistent across the cluster - problem or not?

  Hello

  as a parenthesis in an associated storage workshop, the instructor said that on some site of the client, there was silence damaged metadata vmfs happening and the reason for it was locking issues that concerned the fact that the SAN LUNS Hat different scsi id on different Cluster nodes.

  I asked for references for this, but I got information on the verification of metadata etc.

  now, the reason why I'm asking here is, I found that some in our environment vmfs data warehouses do not have compatible scsi-id numbering on the Cluster. I thought it was just mostly a cosmetic problem...

  Two questions:

  1 are warehouses of VMFS data really at risk with this? Any reference to a KB or some experience on site? We have never had a problem with the warehouses of data so far.

  2. about the setting of this (we do it anyway), which is the recommended best practices to do?  Shouldn't a data store with a different ID Scsi remapping result in the data store that is detected as a snapshot?  Think we need to do some additional precautionary measures to avoid what is happening

  Thank you!

  regads

  Roland

  Take a look at this article for possible problems: VMware KB: can not see some or all VMware vCenter Server or VirtualCenter storage devices

  A requirement is to have uniform or a coherent presentation of the LUNS across managed VMware ESX servers. More specifically, must match the LUN ID for each respective LUN between all of the VMware ESX servers.

• Conversion to Windows 7 problems

  After my conversion to Vista Win7, I can't handle the pages in the control panel and I can't develop the tool panels. Also some of the previous files do not contain data just a solid line. Everyone has experienced problems with their conversion? Thank you

  It is the following: panels and InDesign tools answer not to the clicks of the mouse (Windows 7/Vista)

• WebLogic Cluster problem

  All hell
  
  I am trying to troubleshoot a weblogic clustering issue and am hoping that I get help here.
  
  Basically, I have properly configured a cluster between 2 managed server nodes. After you have configured node 1, I used the pack/unpack to build node 2. The combination seems to work and I'm able to start two managed servers. However the deployments fail on node 2 and succeed on node 1
  
  The error is due to a missing class file. WebLogic is able to locate this class on node 1, but for node 2, it returns an error "class not found". The jar file exist on both nodes at the same place
  
  After further investigation, I noticed that there is a difference between how node 1 and node 2 are started i.e. different class paths. The node Manager allows us to launch the two servers.
  
  How can I make sure that the Manager of the nodes on both nodes use the same startup for the respective nodes script so that class paths are the same
  
  Thank you
  
  Shiva

  I was able to understand the question. StartScriptEnabled = true on node 2, fixed the problem. Nodemanager using scripts separated on both nodes that was causing the server to be different properties
  StartScriptEnabled = real forces NodeManager to use the script startManagedWeblogic on both nodes

• Sony BDP - S280 Dolby digital output problem

  Hello

  I'm getting problems with output Dolby Victor and my audio/video receiver.

  If I run the disk (DVD or BR) and choose DTS playback, the audio/video receiver detects it and sounds correctly

  If I run the disk and choose Dolby Digital AV receiver doesn't recognize any signal. No entry at all. Instead if the BR drive, I select DolbyDigital out as mix PCM then the audio/video receiver detects an input (stereo only) and seems ok, but of course, only stereo.

  Seems that the Sony Reader does not send a suitable output (I checked my audio/video receiver with other players and works very well)

  How can I solve this problem?

  The connection between the BR player and audio/video receiver is made hollow coaxial digial.

  Any comment is welcome

  Thank you

  Hi Vico! Please go to the Audio settings then. BD Audio Setting MIX and Dolby Digital Dolby Digital set to OFF. Let me know what happens.

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/win-4k

• Digital audio problems on Satellite A300 (PSAGCA-06M01N)

  Hey,.

  A few weeks ago I noticed that my laptop is announced with the audio digital. I looked through the sound options of Windows, he told me it is in the front. After a lil' googleing I found out mini-Toslink (optical 3.5 mm).
  I bought a cable, it is plugged in, does not work.
  Made sure the drivers have been installed, everything seems to go well here.
  Tested cable in my computer friends, cablings.

  So now I don't know where to go from here?
  For me, it seems that the socket or the plug inside is broken, because when I plug a normal headphone jack into the port, it pops up a message saying something just got plugged, however is not with the optical cable.

  Someone at - it there HD Audio works on any similar Toshiba? Or does anyone have any ideas as to why it may not work?

  Thanks for any help!

  Hello

  Not all A300 are equipped with a digital audio output
  However, if you are sure that your laptop supports this feature then it should be possible to operate

  You must make sure the digital output was chosen as default in Control Panel-> sound-> the Read tab.

  If the digital audio output will not appear in the sound options then you must right-click and must check if both options are enabled; Show hidden devices and show disabled devices.

• NI USB-6501 digital output problem

  Hello

  I use DASYLab v.11 and I'm working on an interface with the NI USB-6501 where I'm putting a digital high on four ports.

  With the module "NOR-DAQmx - digital input", I managed to read the digital inputs of the ' NI USB-6501 ".»

  It's only the "NOR-DAQmx - digital output" I can't go to work.

  Using 'NI MAX' of NOR I have easily can emmit my four LEDs in the way of my High/Low ports.

  But not with DASYLab. When you use DASYLab tension on the ports remains unchanged.

  Now, I have a switch module, generating 5/0, directly connected to the digital output module, which is assigned to my four output ports for my task.

  I also tried with a module of relay between the two without success. I also tried to use 1.5 above instead of 5 without success.

  I use the option 'Bus (0/5 supply) for the module "Digital output".

  "NI Max", I configured the ports as "active drive.

  Any suggestion of what I might be missing?

  Thank you

  Martin

  Hmm, four ports, or four lines?

  A port consists of eight lines. Each line can control an LED (ON / OFF ~ 0/5V).

  If you have created a task to dig-out to control a port, 5V to this port sending sets all lines of this port to 'high '.

  You need to 255 for each line one too high port (at the bit level: 128 + 64 + 32 + 16 + 8 + 4 + 2 + 1).<- eight="">

  Or, you can create a dig out tasks to control four lines of a specific port.

  Four lanes of the EEG DAQmx DigOut module.

  Each of the channels of the modul will feed a single line of the task/device.

  Four switches will then turn the lights, or turn off.

  Make sure, that the 'bitposition' is the number of correct line (see picture).

• virtual digital input problem

  Hello

  I'm learning about labview data acquisition. So, I made a base for digital vi, with a virtual digital input device. For some reason any I can not output anything other then zero, but when I run the daq assistant (when you install assistant daq) Boolean values between 0 and 1. But, in my VI I can't get any other input then set to zero.

  I enclose my VI.

  Thank you

  You should associate your stop button at the entrance to Stop on the DAQ Assistant.  You are openening and close the task each time when you do not do this.  According to me, which is also reset the activation/deactivation of the simulated device.

  

• Hexadecimal string of Conversion of the Cluster

  Hello

  I need to convert a string to a 32-bit integer,

  the 32-bit Hex input is read from a file (ex: 0x0012334A). Since this value required to contribute to an inorder to Cluster Bundle send using CAN protocol.

  How to convert this and pour into the cluster of data?

  Someone please comment on this.

  Please find the attachment for the block diagram.

  -mfp.

  Have you not read my answer and looked at the attached vi?

  Give you one more time

  EDIT: didn't see your last response. See the VI attached and sorry

• VCS CLUSTER PROBLEM

  Need an idea to fix a few alarms on my cluster configuration two VCS.

  VCS are running X8.5.1

  Had five alarms on the my resume

  1. the replication is no longer available.  Systems have 4ms between them.

  2 lost all Admin user accounts less?   Strange... Newspapers reported that no one was in the VCS

  3. admin VCS Master on the master account was returned to the TANDBERG default?   (Alarm has stated that this was the case).

  Changed the admin password and recreated my admin on the master account.

  4 approves. it 2 (slave) lost all VCS user account, but the admin password reset not and does not have that I have listed.

  My partner has been able to connect to the peer 2 VCS, even if his account is not listed in the list of users?

  ------------------------------------------------------------------------------

  After the captain restart now, I have three alarms

  a. unexpected software error has been detected in ClusterDB: unknown reason on the slave?

  b. There is a port conflict between the media (36000-47999) port range and the range of ports UDP ephermeral (40000-49999) on Master

  c. Core dump mode has been changed, but a reboot is required before this takes effect on Master

  1. any ideas what could have caused the user accounts to disappear on the page?  I think that they are still in the VCS configured just cannot see them.

  2 will be restarting on the master clear alarms b and c?

  3. a reboot on the peer 2 (slave) would open the ClusterDB alarm?

  I can't restart until later tonight that calls are up on both.

  Oh finally where one or even any changes a core dump mode?

  Thank you

  Connect to the VCS via Telnet/SSH/series and log in as 'root '.

  use the command 'selectsw' to see what partition software he's using now, then, if image1 is active, allows the command "selectsw image2" switch to the other, or vice versa, and then restart your computer.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Installation of the software digital camera problem

  I'm trying to install Canon Digital Camera Utilities - ZoomBrowser EX 6.6, CameraWindow DC 8.3 and PhotoStitch 3.1 on my laptop (Windows 7 OS).  I get a message telling me that the application only supports a screen resolution less than 1024 X 768.  My screen resolution is 1600 x 900.  I have even change the resolution of the screen to 1024 X 768 and still get the same message.  In addition, the software installed fine on my desktop, which has a Windows XP operating system.  Can anyone help?

  Hello

  Aren't you?

  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-OneNote/ZoomBrowser-wont-open/ea96b706-dcd6-42AA-8080-f34bf883aa97?msgId=76bcc54b-e87d-46BA-9506-659e1f002b7a

  So you're forced to talk to Canon suggested such Support in the other fhread.

  Use only one profile.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• conversion of ms cluster

  Hi, is there other aspects when migrating a MSCS from the physical to the virtual. The goal would be that the cluster is converted into line to avoid outages.

  In addition, vmware converter standalone can migrate the servers online?

  Thank you, Mark

  If I remember well MSCS is recommended to be used on RDM (Raw Device Mapping) between virtual and physical.

  Alternatively, you can refer to these KB articles:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1002661

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004617

  Good luck

  ___________________

  A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4

  If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.