Failure to display on Qosmio G10

Similar Questions

• A vertical line on display on Qosmio G10

  Hello world

  Since yesterday I have a vertical line on my screen. He begins to show the start line and all the time. I already had the problem with the graphics card, so I had to replace the motherboard. Is this problem with the graphics card again?

  Hmm, I guess that Yes.
  You could try to connect the external display for the Qosmio, and check to see if the same on the second monitor.
  If the thin line will be visible on the external monitor, then everything looks like the graphics card failure.

• Qosmio G20 screen is comatible with display Qosmio G10?

  Hello

  Dose anyone know if the screen Toshiba Qosmio G10 is compatible with the Toshiba Qosmio G20?

  Thank you guys

  Of
  Sweet

  Hello

  I think display of the G20 should be compatible with the Qosmio G10 display.
  I searched a bit and found that the Qosmio G10-100 PQG10E was fitted with the 17 "WIDE XGA LCD.
  The Qosmio G20-101 PQG20E supports the same 17 "WIDE XGA display.

  Therefore, it seems that both units use the same screen.

• Qosmio G10 does not start

  Hello world
  I have a qosmio G10 since less than a year. It was just perfect.
  But now it won't start, but I'm unable to identify the source of the problem. (I have some experience with hardware problems, but...)

  When I push the Start button I have the ear of the DVD player running, the lights of the HD for a second and then the laptop seems to be turned on, but HARD drives do not seem to work (there is absolutely nothing on the screen, no boot screen at all). I am able to open the drive of DVD/burner to be able to exist even on the battery.

  Someone will be kind enough to share a few tips? (The FN F5/F1 key does not help)

  Thank you

  Did you hear one beep?
  This unique short beep is displayed if the device succeeded the POST (power-on-self-test) and the material is ok.
  The BIOS of the motherboard will occur always a POST during the power up, usually, this test is required to ensure its correct operation of the system and if a
  failure of the POST will identify the failure and emits a sound signal to ask the technician to take remedial action as soon as POSSIBLE.

  In your case, it s perhaps something wrong with the display. Try to connect the external monitor to the laptop.

  In addition, you can try to remove the battery and unplug the power adapter for a while.
  After several time try to connect the AC adapter again and try to start the laptop.

  If it doesn't help then I would really communicating with the Toshiba service partner in your country for the control of the laptop. Usually, technicians start some tests diagnostic and are able to locate the very fast fault.

• View properties (Qosmio G10)

  Hello

  Basically, I tried to show my parents on their TV from uni photos (Qosmio G10 - WIn MCE 2005). And it worked! Then, because I thought that the resolution was too thin, I decided to fiddle around with the settings in display properties as well as the utility of GeForce FX Go5700 to change and carried far changing the settings. After I pressed a button or another, the missing TV picture. I can't get it back.

  Anyway to reset or the default display properties and / or the GeForce utility - at least that will aloow me to continue to use my laptop for another presentation must in particular to uni.

  Thank you very much

  WB

  Yes, while the Qomsio is running, press Fn + F5 until you get a picture on its internal screen.
  Later,.

  Alcahest

• Qosmio G10-100 - failed afer replacement with larger HARD drive HARD drive

  Following a failure in a Qosmio G10-100 HARD drive, I replaced the HD 80 GB IDE current with a 160 GB IDE drive. After execution of the recovery of the DVD, new HARD drive has been formatted and installed the software (later proved by removing the drive and treat as an exterrnal disk on another PC).

  However, on booting, the machine has recognized that it was another hard drive and it wouldn't let me go beyond the screen that offers alternatives (Safe Mode, etc.), nor what would allow me access.

  Counsel gratefully received

  > After running the recovery DVD, new HARD drive has been formatted and installed the software (later proved by removing the drive and treat as an exterrnal disk on another PC).

  Sorry mate but I put t understand what you did exactly
  You have installed the Windows operating system on the new HARD drive by using the recovery disk. Right?
  Well, the recovery procedure has completed correctly? The operating system has been successfully installed?

  Did repeat the installation of the OS?
  If this is not the case, repeat!

• Purple stripes on screen Qosmio G10 106

  Hello
  All of a sudden my Qosmio G10 - 106 has started to show me purple stripes when I turn it on, it me does not start then I reinstalled Windows on the 2nd partition. This allowed me to start then, but the lines persist. Anyone had same problem and if so, please advise me a solution that I am not covered by the guarantee as it exprired last October.
  See you soon

  Hello

  I recommend you test with the external monitor. If the external monitor doesn't show the same there is a problem with the display and you must contact the partner of service authorized in your country.

• No big screen in Windows Media Center on Qosmio G10-133?

  Hello
  I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
  Any help with this would be much appreciated.
  Thanks in advance.

  Hello
  Can you please check in the BIOS settings if there is option called display stretching or something like that?

• Qosmio G10 - 134:Can, I attach a question of PS2 and PCMCIA slot

  Hello world

  I think buying a Qosmio G10 134 soon.
  1. How do you pronounce Qosmio?
  2. can we my son attach a PS2 and use the screen for his games?
  3 are there the PCMCIA slots on these machines?

  Thank you
  Lemarié

  Hello

  Self-monitoring analysis and Reporting Technology (or S.M.A.R.T.) is a technology that allows a PC to in some cases predict future failure storage devices. This SMART technology is present in your drive, but by default is set to off on your drive. To use the feature S.M.A.R.T. would require you a software (or BIOS) which allows and monitors the Smart status of your hard drive.

  HARD disk speed is unfortunately unknown to me.

  I'm sure that the TV tuner is set to Pal if you will buy it in the United Kingdom and may not be changed for NTSC.

  Qosmio G10 106 has 4 x USB ports and Bluetooth is not available.

• Qosmio G10: Monitor completely blackened

  Hello!

  I have a problem with my Qosmio G10, I turn on the laptop, the fan made a noise, and finally he logs in Windows. Meanwhile, I can't see what is happening, because the screen is blacked out. I hear just to log on Windows.

  I tried to connect a normal PC monitor, in addition to press Fn + F5, which is the shortcut key for b/w display switch types.

  If anyone has or has had the same problem and could help me, I would be more than grateful, as long as this problem is happening for weeks.

  Hello

  Have you tried to boot in safe mode?
  Please check if this is possible and if it will not solve the problem of the display.

  But if the note, then I suggest that there is something wrong with the display or a part of the screen for example: FL inverter.
  In this case the best way is to contact Toshiba service partner because he could do a diagnostic test and it can get a good answer what part is default.

  Good bye

• Is it possible to reactivate Qosmio G10 mode standby with Skype call?

  I would like to know if it is possible (and how) to use my Qosmio G10 as a phone with videoconferencing as easy as with a normal phone, I mean how to leave the laptop to low-power mode and let Skype awake it automatically and directly ring when you receive a call.

  I use it without problem when the laptop is not in a sleep mode, but if someone calls when the laptop is in low-power mode, so it does not ring. of course, I don't want to leave a fashion of maximum energy all the time...

  Anyone know a solution? I guess it happens this way because in mode low energy, wi - fi seems to order, because when my computer wakes, then it displays a message saying that 'now he is connected.

  Thanks for any help

  Hi Bea

  Your idea is very interesting but unfortunately I don't think it's possible.
  Activation of the sleep or Hibernate mode is not possible with Skype or other IP phone application because this function must be supported by the BIOS.

  But the BIOS doesn't support something like that

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?

• Software missing to get TV on Qosmio G10

  Hello

  My Qosmio G10 has just been repaired.
  I'm getting following error message when you try to use the TV feature:
  "the files needed to display video are not installed or they don't parpadean not correctly: restart the PC.

  Thus, some software are missing: which driver or SW? I couldn't find a good answer by browsing the full FAQ.

  Any help welcome, thank you.
  Polog

  Hello

  It would be very interesting to know what that means.
  Unfortunately, I put t speak French :(

  But I can speculate. I think that the TV tuner driver could not fail.
  This driver, you can find on the page of the Toshiba driver. You can try to reinstall.

  But why the message in French? Have you used a French OS?

• Lack of graphics Qosmio G10

  Hi guys,.

  I have a problem with my Qosmio G10 with graphics. Image on the screen is completely wrong. Pictures on the screen are distributed in different places that appear in different points of the screen. This bug begins just after power on the laptop.

  For example the QOSMIO logo is shown in different points of the screen in the following mode:
  In left hand side of the screen are part of M, I and O, then BONES and part of M, then to the right of the screen are Q that is cut to the two parties and the left side of the o.
  All things are displayed in the same way.

  Pleas help me with that, if that's possible?

  I thank in advance
  IVAN

  Hello

  It s very sad to say but it looks like a graphics card problem!

  In this case, you will need to contact the ASP in your country for assistance. I guess that the motherboard needs to be replaced because the GPU chip is fixed on the Board of Directors and cannot be eliminated in the unique setting.

  I hope you ve purchased a new extended warranty because the replacement of the motherboard can be a bit expensive :(

  Contact the technicians and ask for more details!

  Good luck