Is it possible to reactivate Qosmio G10 mode standby with Skype call?

Similar Questions

• Qosmio G10 video problem with RAM

  G10 with: replacement card with nvidia go6600.
  After the overheating of the videosubsystem appear artifacts on the screen.
  Chip GPU has been changed, but the artifacts on the screen has not disappeared.

  As amended VRAM chips, but we did not find SAMSUNG K4D553235F-VC2A memory and place instead he Hynix HY5DS573222FP-28 - completely identical memory chip.

  But the laptop is not loaded.
  If it is possible to address something in the BIOS?

  Hello

  Seems the VRAM chip is not totally compatible and this may affect the functionality of the laptop.

  I think that you should use the same VRAM chip that has been previously installed.

  But to be honest, this table of cooking must be done by a certified maintainer Toshiba

  Welcome them

• Qosmio G10 - a problem with the cooling system

  Hello

  Put on my G10-100 this morning and got the following message:

  "A problem with the cooling system has been detected. "Please turn off immediately and the return of serve.

  My other machine running and connected on toshibas website and found the number of support.

  After which left a message there, the automaton response was "we aim to get back to you within the hour," Needless to say, it's now 6 hours later.

  I can't find whether on the web or in these forums, has anyone encountered this before?

  I'm still in my 1 year warranty, but he soon run out.

  Thank you
  James

  Hello

  This looks like a problem of overheating on your device.
  In this case, you must contact the ASP.
  I don't know if it's a phone number just to post you but please visit this m link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  You will find a Toshiba service partner who is responsible for your country.
  It should help you to solve this problem

  Good bye

• Qosmio G10 - no sound with external speakers

  When I connect external speakers, no sound coming from them, on the built-in speakers. Could this be a hardware problem?
  Thanks for your help.

  Hello

  You didn't explain what happening exactly when you put the audio in Audio out port Jack. Now integrated speakers shouldn't be active any more. If they still work, I guess this little mixer of audio port which allows to switch between internal and external stakeholders can be damaged.

  If there is any attempt of trying to connect headphones or external speakers to make sure that no sound is at all.

  Good bye

• Broken screen, external display mode standby with Satellite A10 S203

  Of my Toshiba Satellite A10 S203 screem is broken, it's all guts, the colors and the black spaces. I plugged the laptop with an external display, but as soon as Windows starts the external display is in stand by. How can I change this?

  Hello

  I had this problem as well before. After Windows starts the video reset Resets the video output to LCD screen instead of external monitor. Once this is the case try to use the Fn + F5. If this does not work, you might be able to start and press F8, once it gives you the windows selection menu go to safe mode. Once there go to video properties and change the default settings for the external monitor and try to restart normally. Should do wonders. Hope this helps, if not let me know.

• Black screen and mode standby with the message "no signal".

  Correctly, it's... kind of weird, I use my computer and the monitor for a year or 2 now and don't never had real problems. The thing is that when I got home last night I found my black screen and standby mode (as if the computer was turned off (which it wasn't)). I thought that the reset will solve the problem, and so I did and didn't get the message "no signal". All tried, reconnecting cables, reset several times I could count... nothing helped for awhile.

  At any given time during one of my restarts it reworked all of a sudden no aparent reason. So going on my daily buissiness I want to get back in the saddle, when I accidentally hit the side of my computer with a book and the screen went to 'no signal' again. Just tried again and even used my cell phone to check if the monitor was working,... now comes the weird part,... also on my laptor monitor is having problems with "no signal", but only when I do my main screen. It works as a secondary screen, but I can't get the context in which to work. (finding that I'm guessing that this problem is not related to my normal computer, but I'm not sure).

  I am running vista and got a nvidia 8800GT graphics card. Also, I noticed something that is at any time using both the hdmi cable on the graphics card or using the socket with the internal chipset of my computer makes no difference. in both cases, I get "no signal" and the screen goes to sleep... Is there someone who can help me and tell me what probably is the problem here? I'm really looking forward to the answers, thank you very much for your time and effort.

  Hi Ron Suykerbuyk,

  If you are comfortable, then try to remove the CPU cover and check if the graphics card is well connected to the motherboard. Even if it is connected correctly, you can try to reconnect the graphics card and check.

  Hope this information is useful.

• LAN died after turning the Mode standby with Windows 7!

  I have a motherboard Intel DX58SO with the last LAN driver v15.3.  After my computer goes to sleep and then he wakes up, back to the top of the LAN adapter is turned off and it won't work again until I restart my computer. I have Windows 7 Ultimate 64 bit and I was using Windows Vista Ultimate 32-bit before with no problems. I did a fresh install of Win7 and not upgrade.  Anyone have any ideas?  Thank you for your help and your time!

  Here is a copy of the email I got from the Intel Technical Support.  In fact, I solved the problem until I got the email. Decommissioning of the bios resolved the problem for me.

  Please contact Customer Support.

  I understand the LAN adapter will extinguish after the system returns to "standby" mode on Windows 7 *.

  In this case, we recommend test you the system with BIOS version 5200. Please perform a BIOS recovery to make the update. The file can be found at:http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18938&ProdId=3018&lang=eng

  For the BIOS recovery instructions, please visit:http://www.intel.com/support/motherboards/desktop/sb/CS-023360.htm

  If the problem persists after using BIOS version 5200, please try to use driver version 14.6. You can find this driver to:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18196&ProdId=3018&lang=eng

  Post edited by: Apota

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?

• Qosmio G20 screen is comatible with display Qosmio G10?

  Hello

  Dose anyone know if the screen Toshiba Qosmio G10 is compatible with the Toshiba Qosmio G20?

  Thank you guys

  Of
  Sweet

  Hello

  I think display of the G20 should be compatible with the Qosmio G10 display.
  I searched a bit and found that the Qosmio G10-100 PQG10E was fitted with the 17 "WIDE XGA LCD.
  The Qosmio G20-101 PQG20E supports the same 17 "WIDE XGA display.

  Therefore, it seems that both units use the same screen.

• Capture and editing on Qosmio G10

  Qosmio G10 can work with Adobe graphic, editing software is dirrectly or indirectly?

  Can you explain what you mean with directly or indirectly?

  Anyway, every software producer sets minimum hardware required for use of the software.

• S video, no color image on Qosmio G10

  By getting only a B & W picture on G10 when connected the STB to watch in the port with switching SCART to S video cable.
  Have the value monitor in sVideo in utilities development photo Tosh & TV in PAL (such as the United Kingdom).
  In the disposition of forces G advanced settings TV type is set to PAL - B.
  Get all clear but only in B & W v channels.
  Qosmio player mode (i.e. without XP MCE &) the image is in perfect color so it must be a problem XP/MCE. Any ideas?

  Hello

  A friend of mine had a similar problem with his laptop. We tried all possible settings on the laptop and after all, we found a framework called S-video TV. After the ignition of this option, we had photo color immediately.

  Check please if you can find the same setting on your TV.

• Qosmio G10: Monitor completely blackened

  Hello!

  I have a problem with my Qosmio G10, I turn on the laptop, the fan made a noise, and finally he logs in Windows. Meanwhile, I can't see what is happening, because the screen is blacked out. I hear just to log on Windows.

  I tried to connect a normal PC monitor, in addition to press Fn + F5, which is the shortcut key for b/w display switch types.

  If anyone has or has had the same problem and could help me, I would be more than grateful, as long as this problem is happening for weeks.

  Hello

  Have you tried to boot in safe mode?
  Please check if this is possible and if it will not solve the problem of the display.

  But if the note, then I suggest that there is something wrong with the display or a part of the screen for example: FL inverter.
  In this case the best way is to contact Toshiba service partner because he could do a diagnostic test and it can get a good answer what part is default.

  Good bye

• Lack of graphics Qosmio G10

  Hi guys,.

  I have a problem with my Qosmio G10 with graphics. Image on the screen is completely wrong. Pictures on the screen are distributed in different places that appear in different points of the screen. This bug begins just after power on the laptop.

  For example the QOSMIO logo is shown in different points of the screen in the following mode:
  In left hand side of the screen are part of M, I and O, then BONES and part of M, then to the right of the screen are Q that is cut to the two parties and the left side of the o.
  All things are displayed in the same way.

  Pleas help me with that, if that's possible?

  I thank in advance
  IVAN

  Hello

  It s very sad to say but it looks like a graphics card problem!

  In this case, you will need to contact the ASP in your country for assistance. I guess that the motherboard needs to be replaced because the GPU chip is fixed on the Board of Directors and cannot be eliminated in the unique setting.

  I hope you ve purchased a new extended warranty because the replacement of the motherboard can be a bit expensive :(

  Contact the technicians and ask for more details!

  Good luck

• Qosmio G10: Blue screen shot and later endless reboot

  Hello!

  I found similar topics on this problem, but they were locked and left unanswered.

  My problem is this: I have not changed of _anything_ in the BIOS for a log time. I have not installed new software or hardware lately. And I have not damaged my computer or anything like that. A few days ago I read a Web page when my computer turns off suddenly. It turned on automatically, then it asks me how to restart... count up to normal restart... the blue screen of death... restarts, wonder how... I choose "Safe Mode"... BSOD. I press F8 and try all possible options, but the result is always the same.

  A blue screen indicates: "MACHINE_CHECK_EXCEPTION" or something like that. I'll send more information about blue screens later and more machine ID.

  If someone has any idea what happed and how this could be fixed, do not hesitate to write.

  I can't access Windows and I won't use CD recovery (yet) because I need to save some data to the HARD drive first.

  I say it's all simply amazing. Graphics card a year ago broke down (blue/green vertical lines, fans are going full throttle) and now this! This is the 2nd time in two years when Qosmio brokes suddenly.

  Post edited by: ADMIN

  Ok. Here's some additional context information.

  My laptop Qosmio G10-105, model PQG10E-01D016FSR. After disassembly I was not able to access the windows more - not again. Several times that I managed to get into SafeMode so far, I was able to see the text "Safe mode" in every corner of the Welcome screen, but then it crashes. Once or twice the same in normal mode, Windows on the Welcome screen appears, but then it crashes immediately. In these crashes, blue screen says "MACHINE_CHECK_EXCEPTION" or 'PFN_LIST_CORRUPT' and landfills fysical memory on disk.

  If she does not get there and computer falls down at the beginning (even if the Windows loading screen) it restarts all computer instantly. Sometimes, he does not screen blue but says the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. This error can appear four or five times in a row then it tries to start normally, but blue screen crashes again.

  I can't find any logic in the accident, nor a way to avoid. It seems that various errors appear randomly. I would like to know if it is a crash HARD drive or something else. Other information are also welcome.