Failures of the integration of Windows XP hotfixes

Similar Questions

• Activation of the integration in Windows Virtual PC features

  I installed Windows Virtual PC and installed XP on it.  I also installed the integration features, but whenever I'm going to allow it, he asks for a login and the password, which apparently is not the same login and password that I used when I installed XP.  Anyone know how I can turn this on, or at least find the right login and password?

  I finally got it work.  The problem was that I had set up XP in VPC to log on without password.  Apparently the integration features requires a password, and even leaving the empty password would not work.  So, once I added a password to log on my XP, features integrations worked well.

  This trap for the unwary should be explained in the help VPC files.

• Power failure during the installation of Windows 7

  We had a power failure most when setting up my Windows 7 upgrade installation and it will not complete the installation. I downloaded the iso image and an installation DVD, but it does not start the machine. I checked the DVD works on another box of Windows 7, so I'm stuck. I ran the front compatibility checker I tried to upgrade and we found some good things. Any advice in addition to the upgrade of the mother/processor board?

  Remove the hard drive from the computer, connect it to another format only the Windows partition, reinstall it to the original host and try to re-run the installer of Windows...

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• Failure of the user after windows update connection service 8

  My system went to the failure of the auto repair. I refreshed windows 8, but could not access the c drive. When I try to connect to the system

  It says 'service User brightness Service failed sign-in. User profile cannot be loaded.

  Kindly help me.

  Thank you

  Anitha

  Hello.

  I think that by performing the steps mentioned in the link I have provided below will solve the problem.

  There you go: http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C566845&...

  Kind regards

  Charu

• Failure of the system recovery: Windows installation error message

  System: HP Pavilion a6554f

  OS: Windows Vista

  I replaced a hard drive failed (replaced 1 TB 750G).  Used my system recovery disks.  Recovery system worked well.  After the recovery is complete, Windows began to install and finally comes up with the message: "installing Windows could not configure Windows to run on this computer hardware."

  Recovery tried again, same result.

  Any suggestions?  Diagnosis recognizes the processor, the memory, and drived hard (all past).

  My apologies.  Another thread has answered with the same problem I had.

  Here is the response copied from this thread...

  I used a builders or OEM copy because the owner could not find their burnt copy and HP is no longer a media available for this model.

  Below you will find an article I googled describing the error and the fix.  Simple.  Once, I changed RAID on AHCI, no problem.

   

  Here is the Solution!

  Here's how:
  　
  Option 1: (as Microsoft says, http://support.microsoft.com/kb/2466753/en-us)
  -Configure your BIOS, change the method to control RAID AHCI or IDE / ATA
  -Get your chipset AHCI drivers from intel and load them when the installation program asks you (onscreen that choose you where to install windows, there is a button labeled as 'Drivers')

  the url is http://www.vistax64.com/general-discussion/295950-help-windows-setup-could-not-configure-hardware.ht...

  Thanks to everyone who offers great help!

  Darryl

• Installation failure repeated the error code Windows Update 80070643

  Repeated failures to install 'important' update of Microsoft Office 2003 on Windows Vista Edition family Basic. Difficulty she also failed. Error code 80070643. This can be corrected?

  Hello

  Try the steps mentioned in the link below and check if that helps.

  Windows Update error 80070643:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Hope the helps of information.

• DRIVER POWER STATE FAILURE during the update of Windows 8 to 8.1

  Hi all, I tried to upgrade from Windows 8 for Windows 8.1 but still get a DRIVER error message, OUT of STATE, and then the installation stops and goes back to Windows 8. As it is a very recent laptop, it should not be a problem of out-of-date drivers. Does anyone know how to fix this? Thank you very much!

  I have a the same problem, but resolved

  just update your driver from nvidia with the nvidia tool.

  Then the update will go.

• ERROR CODE 606 CAUSING FAILURE OF THE UPDATES OF WINDOWS 'IMPORTANT' 10

  Help, please!  I try to install the last "10 important updates" for Windows, which I was informed automatically.  I tried 4 times in 2 days now and each of them settled due to the 'error Code 606'.  When I click on "help", he pulls up "WindowsUpdate_00000646" "WindowsUpdate_dt000" If that's any help.  Each time, it goes through all the motions, past by restarting as usual, then I get the same reminder of updates, showing "failed" on all of them.  I have not had this problem before.  I don't know what to do to get these updates installed.  I NEED HELP ASAP!  I am a user of impressive program but not at all a geek who can solve the problems that arise, and I have no one to turn to in my personal circle.

  First of all try to install updates when you're disconnected from the internet.

  If no joy, then try to manually download the same and install.
  You can search the individual updates here:
  http://www.Microsoft.com/downloads/en/default.aspx

  He just put in the KB number and then perform a search.

  If this still creates one problem another thing you can try is disable the User Account Control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  How to use User Account Control (UAC) in Windows Vista
  http://support.Microsoft.com/kb/922708

  TaurArian [MVP] 2005-2010 - Update Services

• failure of the updates of windows

  Until recently Windows updates are made automatically, yesterday, I open the updates by accident and received this message ' Check for updates ' when I do I get an error 80072EFE code, can someone help me please, the updates have been downloaded successfully for some time now, so far, I hope someone can help me best regards j62

  I use vista basic with service pack 2, and yes they came out OK I [none] idea why they stopped...

  You may encounter temporary connection [e.g. 0x80072EFE] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  The foregoing despite...

  When (date about) don't you install Microsoft Security Essentials (MSE) and has been the computer fully-patched to Windows Update in time?

  What antivirus application was installed before you installed MSE, was your subscription always news, and did you uninstall it before installing MSE?

  A (another) Norton or McAfee application ever been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failure of the Installation of Windows Update, error ox643

  I tried several times to install updates: Microsoft.NET Framework 1.x, 2.x, 3.x and 4.x and they always fail to install. (error ox643)

  I am running the latest version of XP.  Fix, he can't find any problems

  Error codes?

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  More information here: http://taurarian.mvps.org/Framework/Net_Framework.htm

• Failure of the driver on Windows XP

  When I plugged my new Rokr E8 on my laptop, it has tried to install the Modem on High Definition Audio Bus drivers and failed because it could not find the drivers. Actually, nothing can see the phone. He does not see Windows Media Player 11, and the Motorola software update is not see it. I tried to run the Motorola 3.7.0, driver installation utility and it does not help, either.

  Any ideas?

  Great!

  I was about to recommend that actually. I had searched to find that there is a problem with other music players which lead me to believe that it was a Microsoft problem and not a problem of Motorola.

  Glad you figured it out!

  Mark

  Support Forums Manager

• Failure of the preview in Windows Movie Maker

  Windows Movie Maker won't let me not preview my film, why is this?

  Hello
   
  1. this happens with all movies that you preview or a particular movie?
  2. what exactly happens when trying to watch a movie?
   
  Try to restore default Windows Movie Maker settings and check the result. To do this, follow these steps.
  1. open Windows Movie Maker.
  2. click on tools and then click Options.
  3. click on each tab and then click Restore all default settings.
  4. apply the changes and close Windows Movie Maker.
  5. open Windows Movie Maker and try to view the video.
   
  For more information on 'Preview' video in Windows Movie Maker, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Preview-video-in-Windows-Movie-Maker
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Failure of the update for Windows Vista (BK3087918) security

  Can someone tell me what I should do to get this update of safety at work.  All other 18 updates succeeded.

  Thank you

  3087918 is an update to windows media, if windows media center is not installed, then the

  update is for a different OS... Get the details here.

  https://support.Microsoft.com/en-us/KB/3087918#/en-us/KB/3087918

• Failure of the Activation of Windows 8 and 8.1: 0xC004C003 error Code

  I recently updated my window preloaded 8 to 8.1. However, after the update, it accepts not my old window key 8 and asks me to activate with a product key. Here is the error code: 0xC004C003

  My DELL XPS came with a preloaded copy of window 8 and yes there a 8 to the rear window sticker

  and fully enabled until I updated to windows 8.1.  And as far as I know, system which comes with preloaded window 8 has its key product injected into the motherboard and 8.1 is free for users of window update 8.

  So why the update do not accept my window key 8 and ask me a new key? I know that my 8 window key can be used to any other system because the key is injected into the mother board and I don't even know the key myself.

  So what can I do now to my window be reactivated?

  No more frustration, it's that I can't go back to windows 8.

  I tried to reset it to the original image using DELL backup & built in system recovery software.

  However, after the image of the factory it does not accept embedded product key.

  Here are the details of the Diag report:

  < licensingdata="">6.2.9200.16384 SL_LICENSING_STATUS_NOTIFICATION 0xC004F009 SL_GEN_STATE_INVALID_LICENSE 0 003667 T00179-60217-82995-AAOEM6.2.9200.2.00010300.0.0.101Windows 8x 64kernel9200.win8_gdr.130531-1504Pacific Standard Time(GMT-08:00)9e4b231b-3e45-41f4-967f-c914f178b6acoperating system Windows (r), channel OEM_DM55c92734-d682-4d71-983e-d6ec3f16059f6ebfad4c-bf1e-b490-0792-af4805004a2e05426-01796-021-782995-02-1033-9200.0000-2892012OEM:DM013973156267325267434076636570069414537104826838472680809750724fake S-1-5-21-3370853396-3622322263-2384857213103310331033SIGNED_INFO_PRS_SIGNEDtrue0 x 00020001DELL AS09 Dell Inc.. XPS One 2710 20131223172100.000000 - 480 < icensingdata=""> < healthcheck=""> PASS < ealthcheck=""> < genuineauthz=""> 0xc004f200< enuineauthz="">                                                                                   < iagreport="">

  To activate Windows 8.1 successfully after you install the latest version of the BIOS.