Falling back to a physical Machine

Similar Questions

• How can I activate my Webcam USB between my physical machine and VM

  I am new and with a stupid newbie question. VMware Workstation 11 is able to detect and use my Webcam on my virtual machine of Ubuntu 14.4, also a long time I disconnects the USB camera after that starts the virtual machine and reconnect again to VMware he catches before my (windows 8.1) physical machine fact.

  Is there anyway I could turn off the camera on windows manually to my vm it catches and turn it back to the when I'm done with the virtual machine. I don't have to work on the PC and reconnect everything all the time. Hope it makes sense. Thank you!

  You can use the menu Workstation VM-> removable devices - to connect to the virtual machine or to connect to the host. If you connect the device to the virtual computer, it is disconnected from the host. After completing your work with the virtual machine, you can disconnect from comments and connect it to the host.

• I am on a MacBook Pro mid 2012, Yeosmite 10.10.5, I want to switch to Sierra and am nervous to do when I had a terrible experience upgrade to Yosemite.  I have everything backed up on Time Machine. Can you please advise me?

  I am on a MacBook Pro mid 2012, Yeosmite 10.10.5, I want to switch to Sierra and am nervous to do when I had a terrible experience upgrade to Yosemite, support with gratitude by Apple in charge.  I have everything backed up on Time Machine. Are there steps of preparation I need to do before you download and upgrade to Sierra.  Can you please advise me please?

  N ° so you have a backup if something goes wrong you can return to Yosemite.

  Only concern is that some devices, including USB that may require the updated drivers, but these records are not always available

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• While the MBP for repair, I downloaded FCP 10.2.3 to a computer lent. Back on my own machine, FCPro borrowed machine library will not be opened because it was created with a newer version of the CPF App Store not 10.2.3 full download

  While my MacBook Pro for the repair, I downloaded FCPX to a computer lent 10.2.3. Back on my own machine, library of FCPX of the borrowed machine will not open because it was created with a newer version of FCPX. And the App Store won't let me finish a 10.2.3 download because the FCC is already on my computer - and he says that no update is available.

  FWIW - MBP 15 "beginning 2011, running OS 10.11.6 Beta (15G7b)

  Any ideas that can help me to keep the day of the Assembly, I did on the other machine?

  Move the application to the trash and try to download it from the shopping page.

• My emails are saved when I do a back up with time machine

  Mac Pro book. Will be backed up my emails when I make a back up with time machine. ?

  Yes. Note that attachments only will be saved if they download

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)

• I have 3 macs backed up on one machine of time driving.  How to transfer one of these worms a new drive?

  I have 3 macs backed up on one machine of time driving.  How to transfer one of these backups on a new drive?  Currently, the only way I know is to copy the entire folder Backups.backupdb containing all 3 backups on the new drive and then selectively delete the backup that I do not wish to keep.  However, this take several days!  I am running a MacBook Pro with OS X 10.9.5

  This is probably the best advice you will find and it will not make you happy:

  http://pondini.org/TM/18.html

  Ciao.

• RDP ActiveX fall back to HTML5 instead of Java?

  Is it possible to have a bookmark ActiveX RDP fall back to HTML5 instead of Java?  Java becomes more annoying with each additional Java security update.  HTML5 compatibility is good, it's just not quite as smooth as the ActiveX option to it by default in all areas for our environment.

  Thank you

  Scott.

  Hi Scott,.

  Thanks for your comments, changes to your favorites of relief are deployed and will be part of our 8.5 version, scheduled for 2015 - beginning of 2016.

• Use OEM Windows 7 Pro in virtual computer; Enterprise of Windows 8.1 in the physical Machine

  Hello

  I need some real tips on Windows license manager that I don't want to go against all Microsoft software license.

  As a backdrop, I have the following:

  -an OEM Windows 7 Pro that came with the purchase of a Dell PC

  -a license in Volume Windows 8 with Software Assurance purchased by my company

  I would like to know if I can install the copy of the OEM Windows 7 Pro in a virtual machine on the Dell PC, while having a Windows Installer on the physical PC/computer Dell 8.1. i.e. physical Machine Dell PC = Windows Enterprise 8.1; Virtual machine in the same Dell PC is Windows 7 Pro OEM.

  I don't want to do a dual boot to install because it will be difficult to remove once my 3rd party applications fully supports Windows 8.1; and I also want to keep my PC as clean as possible. I also can't use one of the Open License of Windows 8 as a lower upgrade to Windows 7 as this installation will take another license to use.

  I read from the windows 7 EULA that:

  'Use with Virtualization Technologies. Rather than use the software directly on the licensed computer, you can install and use the software within the virtual (or emulated) only on the licensed computer system... »

  I was wondering that the clause applies, but I don't know if the OEM Windows 7 Pro can be activated on a virtual machine because I don't have the OEM product key.

  Any advice will be greatly appreciated. Thank you!

  Hello

  I need some real tips on Windows license manager that I don't want to go against all Microsoft software license.

  As a backdrop, I have the following:

  -an OEM Windows 7 Pro that came with the purchase of a Dell PC

  -a license in Volume Windows 8 with Software Assurance purchased by my company

  I would like to know if I can install the copy of the OEM Windows 7 Pro in a virtual machine on the Dell PC, while having a Windows Installer on the physical PC/computer Dell 8.1. i.e. physical Machine Dell PC = Windows Enterprise 8.1; Virtual machine in the same Dell PC is Windows 7 Pro OEM.

  Yes, you can.

  I don't want to do a dual boot to install because it will be difficult to remove once my 3rd party applications fully supports Windows 8.1; and I also want to keep my PC as clean as possible. I also can't use one of the Open License of Windows 8 as a lower upgrade to Windows 7 as this installation will take another license to use.

  I read from the windows 7 EULA that:

  'Use with Virtualization Technologies. Rather than use the software directly on the licensed computer, you can install and use the software within the virtual (or emulated) only on the licensed computer system... »

  I was wondering that the clause applies, but I don't know if the OEM Windows 7 Pro can be activated on a virtual machine because I don't have the OEM product key.

  It's the same clause I was going to paste attesting that you can install the license OEM Windows 7 in a VM.

  
  

  In addition, since you have Windows Enterprise 8.1, you can use the built in Hyper-v:

  Windows 8 integrates into hypervisor called Hyper-V.

  This requires that your processor supports the translation of the secondary addresses.

  To see if your processor is supported:

  Press the Windows key + X

  Click on programs and features

  Click on turn Windows features on or off

  See if you can check off Hyper-V and all its options of void

  If this isn't the case, it does not support Hyper-v.

  You can use alternatives such as Oracle VirtualBox or VMWare Player.

  https://www.VirtualBox.org/wiki/downloads

  VMware Player;

  http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

  Any advice will be greatly appreciated. Thank you!

• Share the reader of fingerprints between the physical Machine and VM

  I have a lenovo W541 with build - in fingerprints, how to share.

  PM with W8.1 already use it, how to use it also to open a session in OS in WM?

  Best regards

  Paolo

  Hi Paolo,.

  Also, I have a Thinkpad W541 and scratched my head on how to use the fingerprint reader, integrated runtime for example 10 Windows on a virtual machine-machine since my cell phone - and then came across this thread.

  After comparing the 'Device Manager' on my VM-machine as well as on the physical laptop I have seen that on the VM machine there was no "biometric devices" not appearing on the VM machine. Of course, I also checked the hardware VM definition dialog if there was a possibility of adding such a device, but it was not.

  So I thought that I was stuck. But I found a solution that is at least sufficient for my needs. I noticed that one of the icons on the side in the bottom right of my machine-VM running (running Windows 10) - there is an icon that has been disabled but when hovering with the mouse it will read "validity sensors sensors Synaptics PS (WBF) (PID = 0017).

  After a right-click and selecting "Connect (disconnect host)" there's a new device that appeared in the Windows Device Manager 'Unknown device' and opening than treeviewitem I clicked and chose "Install driver" and voila! Now my built-in fingerprint reader can be used when running Windows 10 under my VM workstation!

  It is not ideal because it allows to disable the fingerprint reader on the BONES of the physical machine too long that the Windows 10 VM machine is running, but I can live with that. And the good side is that Windows (?) is smart enough to automatically re-enable the drive of fingerprints on my physical machine as soon as the machine-VM is closed / stop.

  I hope this helps!

• My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My lightroom was great before the crash to work and I have a lot of work still pending.

  You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

  The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

• Fabric of the Admin "management of physical machines?

  In the document vCAC of bases and Concepts, in the fabric of the configuration infrastructure (pg 23 in pdf format), it is said that "in addition to manage resources and physical machines computer in a group of fabric, fabric admins too...» "

  Which means that the admin of fabric manages physical machines?  What phyiscal machines?  The ESX host of the backup infrastructure of the tissue group they are in charge of this talk?  Is any aspect of management in the vCAC UI?

  This means that the machines that are configured for physical use. With the help of endpoints such as Cisco UCS, Dell and HP (bare metal servers).

  These machines can be added in groups of fabric such as virtualized resources. It depends on what you want to with the provision, it can be any OS, including ESXi.

• Implemintation of deep security with VCENTER on a physical machine for 2 Questions of ESXIs

  Hello

  I have 2 of ESXi in a Cluster

  VCENTER on a physical Machine

  It had to deploy Deep Security 8

  My question is: I need deep to be deployed in this case, security no EGGS? If not, please let know us if the implemintation may be made on VCENTER without the need to deploy the eggs on the ESXi

  is the physical machine VCENTER is sufficient to install all components and functions of security?

  or I need more host to install the components of deep security?

  Please let know us also about system requirements

  Thanks and greetings

  See attachment

  vCenter can be physical or virtual

• Question pool and physical Machines manual PCoIP

  Relatively new to VMware View. I hope someone can help me understand what is needed to get PCoIP working for physical machines. According to the documentation:

  Use of PCoIP with sources of funds
  virtual machines managed, physical
  computers, or blade PC, you must use Teradici
  material.

  Should I get a Dell PC or laptop to work with PCoIP? What choices do I have?

  Thank you.

  You need a Tera host, here's a good overview map:

  http://bright-streams.com/?p=462

  Linjo

• Advice needed to run 2 instances of VM Workstation 8 on separate physical machines

  I want to run two instances of vmware workstation on 2 physical machines to save resources, rather than having to run all my VMs on a single machine physics. Two physical machines are connected to a switch. How to get the VMs on separate machines to see each other (IE on the switch/network).

  Any thoughts appreciated advice.

  Kenneth.

  Welcome to the community - set the networking of VM bridged and all virtual machines must see the network with no NATing.