False statement

Similar Questions

• help with my true/false statements

  [CODE] onClipEvent (load) {}
  Speed = 3;
  gravity =-1;
  Base = true;
  }
  {onClipEvent (enterFrame)}
  If (Key.isDown (Key.UP)) {}
  This ._y = speed;
  Base = false;
  }
  If (this.hitTest (_root ["base"])) {}
  Base = true;
  }
  If (Key.isDown (Key.UP)) {}
  This ._y = speed;
  Base = false;
  }
  If (base = true) {}
  This ._y = gravity;
  }
  } [/ CODE]
  
  try to make a game, where you start on a basic "base" and then you fly your ship with the up arrow key, and when you let go of the key, you get shot down my gravity... but the only way gravity works if if I put
  
  [CODE] if(base = true) {}
  This ._y = gravity;
  } [/ CODE]
  but the seriousness and then always works waiting for me when I got up, down.
  If I set it to false, it never works

  In the use of comparisons == no not one.

  However, don't forget that real gravity always works, even when you go upwards or downwards!

• False statements to contact me.

  I tried to contact the Apple Support in Hong Kong for a few days to try to reset my iCloud keychain as it was locked.  In fact, I called before and you promised to unlock it but did not.

  This time, after the implementation of multiple appointments phone for them to remember, whenever Apple respond back saying they tried to call back me but was unable to reach me or the phone went to voice mail.  I have not received any calls or voicemail recording.  I check my phone several times and calls are directed by fine.  It seems obvious to me Apple support in Hong KONG are lying on contact me in return?  What controls you have in place to solve these problems?

  This is a user to user support forum. Apple does not here. No one here can help you, you will need to get in touch with Apple.

• Possible corruption ASM or issue of false statements?

  Hi people,
  
  I get conflicting information when I ask the view v asm_disk $. The header for all 114 disks status should be 'Member '. But, with the exception of three discs, all other disks appear as "candidates"?
  
  There are no errors in the RDBMS or alert newspapers ASM.
  
  The database works very well for the moment.
  
  Everyone knows that gap? Is this a case of corruption of disk header? or simple misrepresentation? And more importantly, how can I solve the problem?
  
  Here are the details
  
  O / S: AIX 5.3.12.1
  Database: 11.2.0.3
  

  select DISK_NUMBER,HEADER_STATUS,substr(PATH,1,20),label 
  from v$asm_disk;
  
  *Output:*
  
           17 CANDIDATE    /dev/rhdisk10
           18 CANDIDATE    /dev/rhdisk100
           19 CANDIDATE    /dev/rhdisk101
           20 CANDIDATE    /dev/rhdisk102
           21 CANDIDATE    /dev/rhdisk103
           22 CANDIDATE    /dev/rhdisk104
           23 CANDIDATE    /dev/rhdisk105
           24 CANDIDATE    /dev/rhdisk106
          ...
          112 MEMBER       /dev/rhdisk147
          113 MEMBER       /dev/rhdisk148
          114 MEMBER       /dev/rhdisk149

  Thanks in advance
  
  rogers42

  You must mark this thread as answered because I think that you should really work with Oracle support on this point. You shouldn't use free links provided on the internet. Culd corrupt you your disks completely.

• Read check box state

  Hi there: -.
  
  "I'm sorry this post a simple question, but I can find the answer in the guide online Dreamweaver, and I lost a lot of time trying to find the answer."
  I want to read the enabled checkbox and then given control state if true is returned to call the function 'A' or if false is returned call function 'B '.
  Based on what I found in the reference that I created a variable to capture the State of the checkbox as follows:
  
  function checkboxState()
  {
  checkState var = document.all.nameOfCheckbox.checked;
  If (checkState is true)
  {
  statements
  }
  on the other
  If (checkState is false)
  {
  statements
  }
  
  }
  
  The box is configured as follows:
  < name of entry = "nameOfCheckbox" type = "checkbox" onClick = "checkboxState ()" >
  
  This does not work and I do not know why. I was wondering if I set the box in a particular way, for example by using the value attribute or something, but the reference does not indicate this.
  
  If anyone can help, I'd appreciate it.
  Thank you!
  

  Hi Jules,.
  Thanks for the tip. It worked. I've seen people set up an if statement without any argument 'if (checkStatus)' but I understand very well the mechanics of what he does. (In other words, how a true or false value is passed to the variable) But I learned THAT COBOL code originally then maybe I'm too old fashioned.
  Thank you
  Linda

• How to restrict privacy and-not-track since the config file settings?

  If possible, I want to create a GPO to allow our associates to change browse privacy menu so that they are unable to change the default options.

  Note that the do not track power only makes Firefox adding a DNT = 1 HTTP request headers.

  • https://www.Mozilla.org/en-us/Firefox/DNT/

  This has been changed to active/inactive status and is therefore no longer a framework three States in versions of Firefox current (i.e. privacy.donottrackheader.value is no longer supported).

  • bug 1042135 - back do not follow preferences in order to be a simple switch (privacy.donottrackheader.enabled)

  Copy the following code in the mozilla.cfg file should be enough to ensure that the value is blocked to the false state.

  //
  lockPref("privacy.donottrackheader.enabled", false);

  You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify new values (default).

  Put a local file - settings.js in the folder defaults\pref also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  Among others these functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/

• 27xi: unscrupulous protection plans

  I bought a system from Costco and a protection plan. It will expire next month, so I renewed it with a plan, including the replacement of the screen. The monitor just died, but trying to replace, the company says that I am out of warranty.
  I learned that I have no coverage for the monitor, only the tower. I think it's a position that is dishonest because I bought and a protected system and extended it with replacement of the monitor.
  My claim is that it is a false statement, and that between two protection plans, I've probably already covered the cost of the screen, which was manufactured in November 2013. A poor quality product, subscribed in a misleading protection contract.
  My next step is the consumer because I thought no I have not acted in good faith I have hard being inflicted by HP.

  The escalatiom was a success. I am happy to say that Alex in the dumbest customer service saw the resolution, and I'm back in a air. Thank you for all you help and advice

• FPGA read/write does not not in cRIO-9073

  Hello.

  I'm stuck with a problem in the use of the FPGA Read/Write control please suggest a solution.

  I use cRIO 9073 and I'm trying to place an order ON / OFF of GUI-> RT-> FPGA host. I use a shared variable of the network to transmit the control GUI form to host RT and I use read/write control to FPGA. I also put a Boolean flag in the FPGA VI to control if the control is transferred to the FPGA.

  When I toggle the button in the GUI, I see the same change in the host of RT (shown as 16 probe in attachment 1). However the FPGA indicator (indicated as probe 19) remains the default false state. The FPGA VI is on attachment 2.

  Thank you

  Guilhem

  Your FPGA only reads the control once before entering the loop.  If you want to read control permanently, you must put it inside the loop.

• Boolean button changes color briefly when you press

  Hi, I use Boolean button is a toggle, so I want only text changes when pressed without changing the appearance of the button.

  I am able to change the color on properties to match the color Off (I use the silver palette so normally is yellow), but when the Boolean button changes to, there is a brief change of color again. Is there a way I can get rid of him?

  In fact, some of my buttons Flash black while others are flashing yellow. I have no idea where this is defined.

  Thak you very much.

  There are 4 colors for Boolean values ON and OFF more past of WE OFF and goes off to WE

  You see only the color of transition when you have the locking set of 'locking' Mech by releasing

  Set on "lock when you press on" and you will not see the colors of transition

  You can set all 4 colors by using the Colors property [4]

  Colors [4] property

  Short name: color [4]

  Request: Development of database system

  Class: Boolean properties

  Usage: Create a property.

  Table of up to 4 (foreground color, background color) pairs, where foreground color is the color of Boolean control foreground and background color is the background color of the Boolean control. Color pairs include False, True, true to False and false to True.

  You can set the color of the object of the façade by plugging in a hexadecimal number with the form RRGGBB or by plugging in the constant color box in the property.

  This property is similar to the option of colors on the page of the appearance of the Boolean properties dialog box.

  If the Boolean control has four (foreground color, background color) pairs for four States, this property always returns an array of four (foreground color), background color pairs during playback. When you write, you can pass an array of length 1, 2 or 4. If you pass in a single element, this property uses the value of the element for all four States. If you pass in two elements, this property uses the first value of the element to false and true false States. Similarly, this property uses the second element for the real and the fake in real States.

  If the Boolean control has one pair (foreground color, background color) for all four States, this property returns an array of pair (foreground color, background color) during playback, and uses the first element of the array when writing. You cannot change a Boolean control with (foreground color, background color) pair to a Boolean control with multiple (foreground color, background color) pairs.

  This property uses only the True to False and False to True States when you set the Boolean control to latch or switch when released. You can get and set these (foreground color, background color) pairs even if you do not have the control latch or switch value when released. they are not used.

  Because this property does not change the Boolean control data, you can set it at any time.

  You can use this property to Boolean control on the Classic, Expresspallets, modernand silver . You cannot use this property for Boolean controls in the System palette.

• Press the review button

  Hello!

  I need to change some Boolean button and I want to remove it from the button, the Green led, leaving the true/false state recognizable only from the color of any button.

  Is it possible to eliminate the led Green? I tried with nodes of property, but I can only change the colors button set...

  Thank you!

  Good day

  Mike

  Hi Mike,.

  You can:

  -replace the complete image of the button by customizing

  -Start with a different button (as a classic) that have a 'LED' in his image

• Compare the table and out of the common elements

  Hello

  Can you help me to compare the two tables in the attached file in VI and out the elements common to the two tables?

  Thank you

  hiNi

  There is no wire table through the False State in the structure of your business.  Use the default value if unwired is selected for this tunnel. the default value for this tunnel is an array of empty strings.  Run the wire straight through, and Bob's your father's brother.

  

• Realization of case Structure

  Hello

  I am currently implementing a paperwork on the ECG signal noise reduction. But I don't understand the part of deal structure in the block diagram. I need to know to the FALSE State. I need an explanation on this to find out the REAL State. Please help me explain this state of the structure. Thank you.

  Antu.

  

  Watch your photo, it is that when there is an error generating the FIR filter coefficients simulated signal flows through the same box structure.  My guess is that when there is no error generating the coefficients (error code = 0) the simulated signal is filtered using DDT even-> DBL conversion followed by FIR.vi the range of Signal Processing.

• Writing file case structure while loop?

  I would like to have a button on the front panel which indicates to start streaming data recording or not.  If the user does not press a button, no data is saved, and the façade works only as a display of data.

  I have now does not correctly.  The button is a while loop that is attached to a matter outside the loop structure.  I would like to a false statement to not save data to any file, but I needed to wire my knots of structure dealing with something, so the T and F are currently the same action (sort of).  How do I wire this configuration correctly please?

  Thank you!

  
  

• While the loop does not stop within a structure of business

  Hi all

  I have a business structure that works an engine to a certain PWM when my metal detector does not give an amount greater than the threshold that is ' false '. The motor is controlled by a PI controller so a while loop is used inside the false state. When my metal detector exceeds the threshold I want the "true state" to perform but which does not occur. the entire program is a while loop which aims essentially to maintain the operation of the metal detector. How can I make the State of the switch works.

  Once you get the code is trapped inside the inside while loop, it will never be a Boolean wire change because change is outside. All you need is a loop that contains a structure of housing. Run your program with execution highlighting to get a better understanding of the flow of data.

• different image to display for a range of values in the table of specific waveform

  Hello!

  I'm a VI that is as a precipitation meter reader that displays a picture of what will happen with a place with this amount of rain and display a message (which appears on the channel). Here is a picture of the public Service.

  

  The mm of rain check will be the entry and it will be displayed in the graph. Boolean controls on the other side lights depends on the value of the entry. What I want to do is I want to display an image (which appears on the tab map of flood hazard) and a sentence on a string (which will appear on the additional announcement tab) for each Boolean control. The images and the sentence on the string is different for each Boolean control. For example, if the input is of 7.5, the Normal warning light comes on and at the same time, I want to display an image and a message on a channel. Here is the BD.

  

  I can't launch the VI because there is more than one source in the chain and in the part of path. Also, I don't know what I will in the false statement in the Structure box. Also, I don't really know if putting the box Structure for each a reason.

  Help is really appreciated (because that's my problem for almost 2 weeks now). Thank you very much.

  I do not have the Toolbox, but I think all you need to do and put the right photo (or just make you a selector of images, such as a table that you can find in the functions of the vision).