Fast beep then starts when you start XPS 8700

Similar Questions

• How can I stop and then resume when you use the magnetic Lasso tool?

  CS4 on Mac. I have some fairly complicated selections to make and the magnetic lasso tool seems a good choice. However: How can I stop and then resume when in use? For example, I would like to zoom, start by dragging along the edge, then stop, move the image to a different area of it is in the middle of my screen, then pick up again where I left.

  Hi MarieMeyer,

  You can press the SPACEBAR shortcut to activate the hand tool temporarily once you are finished with the selection on a part of the image.

  Then, move the image with the key space key and let it continue with the selection by using the magnetic lasso tool.

  You can use the SHIFT key to add to the selection by using the magnetic lasso tool.

  Kind regards

  Claes

• "regedit.exe find then unresponsive" when you search for an exe HKLM.

  Original title: regedit.exe find then does not

  When I open the registry by regedit and look for an exe with following HKLM, regedit.exe displays, "find next does not. When I search HKYCurrentUser or other registry keys for the same file, there is no problem. It's only the HKLM key which is not; the error says regedit.exe report crashes (uphang). Anyone has an idea why this occurs and how to troubleshoot and repair?

  Hi ErhanKarabekir.

  1. is the question confined with regedit only?
  2 have had any changes made to the computer before the question?
   
  Check out the following link and check:
   
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Turn on the computer to start normally as described in the How to configure Windows to use a Normal startup state of the article.

  Hope this information helps.

• How do you add a location to send it to the list when you right click on a file or folder?

  How do you add a location to send it to the list when you right click on a file or folder. I am trying everything I need to go clean my hard drive to a USB key. There are seven choices on the list but I need to change the list, so change 2 of the seven choices. Thanks for any help.

  original title: moving files and folders

  Hello.

  When you plug in your USB key and installed the drivers for it; It should then appear when you right-click on a file > Send to.

  See you soon.

• Crashes when you save the eps file

  Don't know how to solve this problem. Saw the comments on changing the time zone, but I can't seem to find where to change this setting (within AI? or are they referring to my computer settings?) Have also tried to install the new Adobe CC 2014, but even that one goes down. Also, I rebooted the computer, but it's always the same problem.

  Thanks for any help.

  Try to "Place" instead of "Import".psd files  When you place the images, you have the possibility to link the files and then again when you save as > EPS.  You have probably inadvertently incorporated the .psd files.  The right method of importing image files using the file > place command.

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Then... Adobe doesn't have a pause for customers of the subscription option? Has anyone else had to pause/hold a subscription and they told you to cancel and start a new subscription when you want to return?

  Then... Adobe doesn't have a pause for customers of the subscription option? Has anyone else had to pause/hold a subscription and they told you to cancel and start a new subscription when you want to return?

  If you have a MONTHLY subscription, not an annual subscription with monthly payment, you can stop/start according to the needs

• ' INVALID BOOT. Message from INI file when you start Windows XP

  I get the error message "INVALID BOOT. INI file"when I start the computer, but then, it goes into XP.  Could someone tell me please how to fix this?  I don't have the Windows XP CD because my friends brother died and they gave me the computer, and it was already installed.  I could get the CD if necessary, but I was wondering if there is a way to fix this without it?  Thank you in advance for your help!

  If you see a message like this:

  Invalid BOOT. INI file
  Booting from C:\windows\

  This usually means that the c:\boot.ini file is missing, but you can replace it.

  Miss the file would require a little extra work, since it is normally a hidden system, read-only file, but I can think of many things that is happy to remove it for you.

  If the system is working properly, what do you think happened to the system since the last time, he did not work properly?

  You now, or have you had the "Ask Toolbar" installed on your system?

  Do you now or nave already used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost, boost, gum, muncher. guaranteed or all that has an icon that looks like a key, the key or the screwdriver?

  In a facility only XP partition has not even need a c:\boot.ini file starts - he's going to complain, but this threshold always begin.

  You must create a new file c:\boot.ini.  It's just a text file, so you can use any text editor such as Notepad or WordPad to create a new file.

  Here is an example of a simple c:\boot.ini file you can copy and paste the text to a new file. :

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect

  When you get this text into your text editor, do a save as, and save the file as:

  c:\Boot.ini

  Answered in the affirmative if invited to replace the existing file.

  Then restart your system.

  If the file is missing once again, we need to understand why and fix it.

• IK merger squeeze: uw firefox-profiel kan niet worden loading etc then start firefox niet. Hoe op you lossen?

  na het downloaden van FF en upgraden knop you activeren, wordt gedwonload FF. then start installatie op het einde FF geen maar maar of fusion: uw firefox-profiel kan niet worden loading; Het is mogelijk niet good co-operation.

  ↑ This is a German article (de) and not article Dutch (nl).

  See:

  • https://support.Mozilla.org/NL/KB/how-run-Firefox-when-profile-missing-inaccessible

  This is usually caused by a problem with the file profiles.ini.

  You can use one of them to reuse an existing profile or create a new default profile for Firefox:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
    If you still have an existing profile, and then click "Choose a folder" in the MP and select the location of a lost profile and recover this profile.

  You should find the file profiles.ini in this hidden place:

  • Windows: %AppData%\Mozilla\Firefox\
    * C:\Users\ < user > \AppData\Roaming\Mozilla\Firefox\
  • Mac: ~/Library/Application Support/Firefox /.
  • Linux: ~/.mozilla/firefox/

  If the file profiles.ini compensation does not work then also check the location of the cache files.

  • Windows: * C:\Users\ < user > < profile > \AppData\Local\Mozilla\Firefox\Profiles\.
  • Mac: ~/Library/Caches/Firefox/Profiles/
  • Linux:~/.cache/Mozilla/Firefox/
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Black screen when you try to start PowerPC G3 beige

  I have a vintage tour 1997 beige PowerPC with OS 9 (don't know which version, I think that the last of them he would go - 9.2.2?).  It has been sitting in the corner, turned off but plugged in for years (on a UPS protected against overvoltages with newer computer).  It was probably 2-3 years since the last power successful upward to retrieve something from him.  I am wanting to get data out of an old program on it, but can't get any view of it, just a black screen.

  Here's what I know about the material:

  Label says PowerPC G3 233 MHz, 512 K Cache, 32 MB / 4 G HD/24 x CD / 56K Modem, 17/02/98

  The memory may have been renovated years ago, there are 3 SIMMS inside.

  I use the video port built, with an adapter for the Apple Display Connector to VGA adapter which worked very well all the years I've used the computer.

  When I turn on, it is what is happening:

  I get the normal "chime".

  The monitor it is connected to the wake mode 'sleep'

  The display goes completely black - (no happy Mac, sad Mac or any Mac or gray screen)

  The monitor will never return "standby mode" until I have shut down the Mac (at least for 10-15 minutes I leave at the same time).  This makes me think that the port video is send something to the screen.

  • Here's what I've tried so far:
  • Tried 2 different monitors and cables, which has occurred on other computers (relatively modern flat screen LCD)
  • Replace the onboard battery
  • Zap the P - RAM
  • Reset the NVRAM by starting command-option-O-f and strike blindly
    • Reset-nvram (press enter/return)
    • Reset-all (News-enter/return) - at what point he restarted then assume that it took orders
  • Started with the space bar to see if the extensions manager would come to the top
  • Sitting SIMM memory (I remember when a memory SIMM went wrong after years, I'm a his 'breaking glass' at the start so I think the memory is OK?)

  The only things I can think to try are changing the ADC to VGA and put in a PCI video card.  Wikipedia lists a couple that were popular with this vintage Mac: ATI Radeon 7000 and 9200.  These will work without having to install drivers? It seems that http://www.amazon.com/ATI-Technologies-Radeon-7000-Graphics/dp/B0000630TB can be had pretty cheap, I don't know about the drivers.

  I have not tried booting from a cΘdΘrom, especially because I was not able to locate them.  I could watch more difficult if it is reasonable to expect a different result, but that seems to be a more fundamental question.  If there are any people with ideas vintage Mac, it would be greatly appreciated!

  The Amazon link you posted is for the PC of ATI Radeon 7000 version.  You need the Mac or PC version which took his chip EEPROM reprogramming with the Mac code.  Fifteen years ago, I bought eight of the sale to the retail-boxing, PC version Radeon 7000 s and flashed the ROM, for use in my beige G3s.  It took OS 9.2.2 support the latest drivers that allowed a 2D acceleration.  The Radeon 9200 Mac Edition is the final PCI graphics card that they marketed for Macs and would cost more and be more graphics card that you need, just to retrieve files from the G3.  You may be able to find a cheap, compatible Mac Radeon 7000 on ebay.  In fact, the older (Mac compatible) ATI Rage 128 PCI graphics of a B & W G3 (shown here) would be well suited to your needs.  When you zapped the PRAM, how many times have you let it go through the reboot cycle, while now pressed the keys "command + Option + P + R?  I usually gave it three.  You could try to remove the sound card 'personality' clean oxidation on the pins plated gold with a soft, white gum and reinstall.  This would be the case for modules of memory DIMMS and ROM card, which can also become oxidized over time.  If the Mac to VGA DB-15 you have a set of microswitches adjustable, the parameters of the (resolution) may be different for newer LCDs you've tried, especially if they have an image format widescreen.  "You can also consult the"failures of start-up list' on this page speed up your Mac G3 box. " "There was a problem with the first batch of voltage regulators used in the beige G3s, but I think they were passed to the VRM Raytheon in February 1998.  If "Raytheon" is printed on your VRM, you can probably exclude the problem.

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• T60 freezes when you move the trackpoint right after starting

  Hello

  I had this problem for quite a long time. Initially, I thought that it was due to an update to Windows XP, but I couldn't find any message on newspapers when the laptop crashes. I reinstalled XP many times to get rid of any incompatibility related to the software, but even with a new installation, it was happening.

  I realized recently after several tests that the problem occurred more frequently when you move the mouse (trackpoint or touchpad) just after the start of the system (cold start or start of hibernation). What I discovered is that this will happen is no longer if I suspend the laptop after starting the system, do not touch the mouse.

  The symptoms are that Windows freezes. No activity at all HD, the system responds to any keyboard and mouse input. If I close the lid of the portable computer system is not put into hibernation. The only way to regain normal operation is pressing the button for a few seconds, then the system turns off, and then turn on normally.

  All the drivers are up to date.

  Someone at - there experience this problem?

  Thank you

  Try to remove the battery... If the battery is dead, it could give you this problem...

• !!! BEWARE OF A SCREEN BLUE (WHEN YOU START YOUR SYSTEM) WITH A LONG QUESTION. WE HAVE ONLY 10 SECONDS TO RESPOND AND REACT TO THE! Somebody has hacked my system / do I have a virus?

  Hi all

  Basically, several months ago I noticed something strange on my computer - I know that I should have acted immediately - my Task Manager has been "disabled by Administrator [my]". Yet, I am the administrator!

  Secondly, I lit my system yesterday and was immediately welcomed with a pale blue screen with lots of white, writing, that says, ' we recommend strongly you do not press "ENTER"...? If you do and you want to move before the expiry of the period...? " However, in time, that I tried to browse what was in front of me (that I was unable to catch everything), a 10 sec period had expired and many more white/numbers/text symbols suddenly started flowing to the bottom of my screen (for 15-20 seconds-from left to right)! In addition, my turn makes an unusual noise - as serious an alert! Immediately after, my system loaded up as usual!

  So, I opened the Start Menu (after I restarted my computer to activate the Safe Mode) and the arrow keys has / not working -I can't navigate upwards or downwards to select one of the options! Yet, they have worked perfectly any other time since - just not in Start Menu! Then, I scanned with Windows Defender and nothing has found summer - my "system is safe."

  Third, since then, I've noticed that my system (Windows XP) ran much more slowly too - informed the script is busy, plug-ins are insensitive, etc. - and the/things are / dragged across the screen! Therefore, I searched the forum and help guide to Firefox for everything that seemed similar and came across an instance of another person things 'slide' with a slow system, who suspects a virus! So, I followed the advice given to them - reset Firefox and download a "10 days free Microsoft Virus Scanner" (recorded under msert.exe); He set off to search for more than 9 hours, which found nothing/no infected files!

  Finally, for all that, I can not use system restore or reset Firefox! I never pressed ENTER when the message appeared - do you think I should be?

  I know that my version of Windows has expired and I plan to update very soon, but do not want to lose all the vital files. So, I am currently the backup copies.

  All this activity may be connected? Or would it be different things are happening? And also, please could someone perhaps shed light on what happened or if they can help somehow? I would be VERY grateful.

  Thank you very much

  Bruce.

  Since we have not heard from you lately, I will go ahead and tell you how to fix your problem disabled Task Manager (and probably a few other things):

  Basically, when you see these errors, the usual advice is something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor because there is no Group Policy Editor in XP Home and that advice really doesn't tell you where to look in group policy, even if you run the Group Policy Editor (unless it's really good advice).

  Basically, you need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that may have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove (like Task Manager), the malware disables the things you tend to use and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  You can also manually create a system restore point before you make these adjustments.

  Open Notepad (and only Notepad) to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in BOLD text into the new Notepad file:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoControlPanel" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose merge or open with... and select the registry editor or import.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test to make sure the changes 'stick '.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, you will see a message like this:

  Registry editing has been disabled by your administrator.

  We must therefore first difficulty (not a problem).

  Click Start, run, and in the type box (or just copy / paste the entire order in the window run more safe) the following text:

  reg delete HKCU/v DisableRegistryTools/f

  Then see if regedit behaves (of course it will be).

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]