Fax to Pc ability does not work in Windows Server 2012 for Hp LaserJet MFP Series PCL6 1536
I have install Hp Solution Center to use the 'Fax to Pc' feature in Windows Server 2012. But it is prevented Windows server 2012. How to use 'Fax to Pc' in Windows Server 2012?
Sorry, but the Laserjet Printer has no CENTER of HP SOLUTIONS. The Toolbox, it is not the center of need. In addition, it is not compatible with the windows server 2012.
The printer must be installed on a network in order to FAX to PC.
1. you will need to type the IP ADDRESS in the address bar on internet. A page with your printer, and you will be set up there.
Tags: HP Printers
Similar Questions
-
Hibernate does not work in Windows server 2012
I am an engineer of BIOS.
Its getting hang everything resuming from hibernation.
Found below log in Event Viewer.
"Windows to not resume from Hibernate with err status 0xc0000411.
Please provide any information that we (BIOS) are missing to give give Windows. Or the status of the err suggest a hardware failure.
Any information here will be useful to me.
Thanks in advance.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Ringtone does not work in windows Skype 10 for winows
The ringtone does not trigger when someone calls me on Skype DVRs that the sound settings will not sounds during a test. All other sounds work fine if I answer call or by phone. And the default audio driver is correct. But no sound when press button test, or when someone calls. where is the audio file?
Found what I was doing wrong. I have a click with the button straight on the "speaker" icon and selected 'Blender volume' there was a Skype option and it exploded almost. Rose to be same as all other mixers and problem solved.
-
VMware fusion 3 - adjustment to comments does not work with Windows Server 2008
I use 3 Fusion with existing image from Fusion 2.x on Windows Server 2008. After the upgrade to Fusiion 3 (I upgraded VMware tools (I've also tried their uninstall and reinstall) too) the guest operating system does not change the resolution when resizing the window. It does not change the resolution if/when I goes into full screen mode. I have an 'exclamation' mark in Device Manager and it says that "Windows has stopped this device because it has reported problems. (Code 43) ». I tried with and without 3D acceleration enabled.
WS2008 is where I spend most of my time in fusion, I hope that this can be solved somehow (a config directive file or something perhaps?)?
Thank you
Miha.
He had a similar position and the problem is specific to the version of the virtual machine virtual material.
Can upgrade you your VM hardware version? (Fusion UI have probably an option present as 'version Upgrade VM HW'... cannot check now but 90% sure about that.)
Thank you.
-
[CS4 Server Win]: Plugin does not work on Windows Server 2003?
Hello
can anyone help?
My plugin works on Windows XP and Windows Vista.
On the two operating systems, the methods of scripts are visible in ExtendScript Toolkit and can be called by javascript.
On Windows Server 2003 that my plugin is not running, the script methods are not visible in ExtendScript Toolkit!
What is missing?
Thank you
Alois Blaimer
Looks like you are using a compiler more later-than-recommended that refers to a later-than-recommended runtime library that is not included in the OS and/or InDesign.
Either:
- Use the correct compiler
- Discover the missing library and install it
- twist the compiler to use the correct library
(I would recommend against 2) and 3) because these hacks tend to break.
For example if you delete something through your runtime lib that has been allocated by InDesign through competitors runtime lib, you could screw up memory management.
Dirk
-
Bluetooth does not work in Windows 8.1 for Studio XPS 1645
I've updated to windows 8.1 and Bluetooth had mysteriously disappeared. When I try and install my old drivers win7, it happens with compatibility issues, even if I set compatibility Vista, xp or 7.
I have the same problem and solved with this driver. It works to win 10 on my DELL XPS 1645 - Dell Wireless 370 Bluetooth Mini-card.
-
Illustrator cs5 does not work on windows 10
Hi all!
I just installed 10 windows on my computer (I have windows 7), but illustrator does not work, you open the charger, but does not open the program.
Asus PC Pentium Dual core - Illustrator CS5 32-bit Pc-e
Photoshop works rather correctly (Photoshop cs5 64-bit).
I tried from the Panel of troubleshooting Windows compatibility with windows 7 and 8 but nothing.
Then I tried this procedure - solved: Adobe CS5 does not work in Windows 10 Solutions for cs3, cs4, cs5, cs6 but not yet opened.
Can someone help me? Thank you very much!
ArGi
Hi Argi,
Exactly as indicated by our MVP, compatibility issues hit blindly and it is not very rare that one of your apps (PS) works in this case well and I is not. Suggest you to upgrade.
Kind regards
OM
-
1670 CDS satellite - modem does not work on Windows 2000
Hi-
I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).
I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is
The port looks ok. Please advise - is it the right driver?
Thank you.
A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.
I have checked the Toshiba site but your model no available Windows 2000 driver exists.
I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.Good luck!
-
Question
better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
DetailsIn current versions of Flash you can also do this via the control panel.
- Control Panel > Flash Player, click on remove and erase data
-
Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.
I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.
It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?
Hello Moronihah,
You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?
That's what you need to do first.
Then, you have to go to the HP website and install the drivers on your USB.
Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.
HP Software and Driver Downloads
You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.
-
Touch screen does not work in Windows XP - Portege 3505
Hey
Anyone know why the touch screen on my portege 3505 does not work in windows xp?
A lot of cheers
Steve
and no one knows what you have done or installed on your laptop?
Sorry about that, but who need to know that? Have you changed something on your laptop >
Did you install a new OS? Have you used the Toshiba recovery image? -
Qosmio G30 - Media center remote control does not work in windows
Dear all,
I have a Qosmio G30-194,
first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.Please advise me what to do, should I send it to the service center, or there is an easier solution.
Mazen h
NB:,: my laptop info are:PQG32E-01P018AR model number
Thanks in advance
Hello
> first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.
If you had a problem with the VGA chip then the whole motherboard has been replaced.
Maybe it has something to do with your problem.Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.
-
Satellite A505-s6970: Toshiba Service Station does not work on Windows 7
Hey guys I need your help,
I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.
When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.
Thanks for your help
Hello
To be honest I have no experience with this tool.
I m using Tempro.However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
You may need to wait for the next update that works correctly with Windows 7.You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
In my opinion, you should take a look from time to time on the Toshiba page we.
I noticed that each new day pilot is released and released. -
Bluetooth does not work on Windows in Satellite C660-A047
Hello everyone,
I have a problem with my laptop (satellite c660-A047) Bluetooth does not work on windows (7 and 8), but it works very well under Linux (Ubuntu, Fedora, Backtrack).
I have an outgoing method :) to do run on windows, start Linux Live then set the Bluetooth adapter to the off State, and then reboot (do not stop, restart only), and then start windows this time this Bluetooth adapter works great and updated automatically in the Device Manager.
To use Bluetooth on windows I have to do the same steps: (.)
If someone wants to know all the details to help me solve these curious case, I will be grateful.
Thanks, looking forward to hearing from you soon.
The laptop supports Wlan Atheros / module combo BT.
This means that a single module shares WiFi and BT connectivity.Using Win 7 you must add the additional drivers called filter for driver Atheros BT package.
So first the Atheros WLan driver must be installed, secondly Atheros BT filter after battery Toshiba BT.To help to win 8, you must install two components of driver manually to enable the Bluetooth feature: System Toshiba + Atheros Bluetooth driver driver filter
[Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm] -
Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit
Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
Can someone help me?Thank you
Hi Largo09,
Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers
In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.
Maybe you are looking for
-
7.26 Skype (328) continues to ask to update - installation is not working
Whenever I start V.7.26 (328) continues to ask to run the update even on the last OSX. Other Mac users have the same problem for OSX Elcapitan? It seems that if the update does not install on subsequent reboot...
-
Is it possible to disable on Satellite A100-02 b FlashCards
Hello is it possible to disable the keyboard shortcut bar in Satellite A100-02 b (click here: [http://www.bilder-space.de/show.php?file=jaYkQZHmSN94eQb.jpg])? GreetingsMatze92
-
Recovery for Pavilion G6-1206AX disks
My hard drive had to be replaced recently and I now require recovery disks in order to get it up and running again. Where can I get these? I looked online and are struggling to find them. Thank you.
-
Is it possible to launch and run a VI in a project from a simple icon?
I am trying to launch and run a VI that must be opened with a project (a FPGA links, etc.) directly from Windows without having to open the project first, and then select the VI of the project. Basically I want it behaves as if the code was deployed
-
question about the installation of Microsoft fix it solutions
OK, I went ahead and went to the correction page for proofreading tool to disable/sidebar gadget. Now say that the instructions to RUN the fix it. But I advanced and downloaded the fix to my desk top first. Is it OK to download to the desktop first a