FB4 compile on save is no longer work? Need to force the compilation via an execution why?

Similar Questions

• Windows 8 fingerprint reader no longer works (need to Flash the BIOS to fix)

  I have a DV6-7014nr bought around September of 2012.  I have upgraded to WIndows 8 when it first came out.  I had no problem with the reader of fingerprints on Windows 7, but do not use for a long time.

  As the subject says.  I can run it for a few weeks (on Windows 8), and the fingerprint reader stops working.  None of the biometric devices are listed in the Device Manager.  If I try to load the driver, it does nothing, as if the player is simply not there the responsibility of the driver closes just (with no message).

  Peripheral Biometirc in the Panel control says there is no biometric device found and simplepass opens without the fingerprint reader recognized.

  The only thing that solves this is my BIOS which comes Insyde to re-flashing. It is noted in the setup of the BIOS relating to biometric devices.  I have just discovred that BIOS update solves a problem because there was an update that I applied.  Have to reapply the update of the BIOS to fix this seems excessive to us.

  Added March 29, 2013:

  I just re-applied the BIOS two days ago and already the figerprint teader plug working again.  I tried a hard reset (because I saw that as a solution previously, and it is easier and faster to re-flashing the BIOS).  Who has shut down, remove the battery, now the power for 30 seconds button, boot the system without the battery.  He has not fixed the problem and I can't even understand why the fingerprint reader keeps disabling.  A re-BIOS flash solves the problem, it seems that the problem must be with the BIOS software.  Oh I also had turned off the "Allow windows to turn off the device to save power" for the biometric device before he went kaput.  It doesn't stop of is suckier.

  There must be a better way.

  Thank you

  Hello cjwh888,

  Try to restore your BIOS then use Recovery Manager to restore your software and drivers.

  Please let me know if it helps.

  Good luck!

• I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft. WHY do you want me to do this?

  I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft.  WHY do you want me to do this?

  I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft.  WHY do you want me to do this?

  It's a scam.  I'm glad you don't fall for it.  All other calls suggest that tell you the caller you brought calls to the police who should dissuade continue to harass you.

  See the following links for more information:

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.mypchealth.co.UK/GuideScam.php

  http://ask-Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

  https://krebsonsecurity.com/2012/08/tech-support-phone-scams-surge/

  http://bottomline.nbcnews.com/_news/2012/10/03/14206238-us-works-to-shut-down-tech-support-scam?Lite

• Internal server messages no longer work when published on the web server, but not locally on the web server

  Just upgraded to 8 Captivate and for some reason my server any internal messages is no longer work on the web server.  I can test locally the lesson that always points to the Web server and it works.  Can't understand why when it is on the server it does not work.  The ashx handler that manages to post is fully accessible to the web server and DNS solves very well so I can't understand why he doesn't hit the Manager.  I use IIS to host it and a .ashx for managing for results.

  Is there maybe something new that needs to be allowed in IIS for 8 Captivate work?  .js seems to be fine and firewall is not the issue.  Short of ideas and the need for this work as soon as possible.

  Thank you very much for your help!

  Nick

  OK, finally solved.  For some reason any run under HTTPS lesson could not publish my results.  As soon as I changed to HTTP the results perfectly. All of this makes sense why I could post locally on the Web server.  Hope this saves someone else 5 days of hell.

• After the FireFox 16.0.1 in Windows Update, the address bar no longer works, as well as the search bar, but not immediately. Reinstalling does not fix it.

  Initially, I downloaded an AOL optimized version, but when the problem came I reinstalled the regular version and it was fine. Two days ago, it restarts randomly. Address bar won't go anywhere with entry or press the arrow and the search bar does any search engine. Try adding a search engine by clicking on "manage search engines" doesn't help; the 'Add a search engine' button is unresponsive and there is not in the list of your choice. I uninstalled everything, including my customizations and settings personal and reinstalled, which did not always help. I tried to disable all plugins and that no longer works. I even tried the search by looking for FireFox homepage, since at this time there, it was the only page I could do and even who would not find. The most recent that I downloaded add-on was the Evernote Web Clipper I think, but it does not seem to coincide with the beginning of the problems.

  Update: I ran a malware (MalWareBytes) program and it came with nothing. I also found in FireFox to get troubleshooting information and added in. In addition, here is my list of plugin/extension:

  Plugins:
  Foxit Reader Plugin for Mozilla 2.2.1.530
  Google Earth Plugin 6.2.0.5788
  Google 1.3.21.123 update
  Java Deployment Toolkit 7.0.90.5 10.9.2.5
  Java (TM) platform SE 7 U9 10.9.2.5
  Microsoft Office 2010 14.0.4761.1000
  Microsoft Office 2010 14.0.4730.1010
  Microsoft Windows Media Services 4.1.0.3917
  Shockwave Flash 11.4.402.287
  Silverlight Plugin 4.1.10329.0
  Windows Live Photo Gallery 14.0.8081.709

  Extensions:
  Avast! WebRep 7.0.1473

  Glad it worked. Thanks for posting back.

  You previously installed another version of Firefox and if it did not seem possible that one would contribute to a clean reinstall, but it is not a general solution that all users should be considered without first try simpler and safer alternatives.

• Some of my F keys on my laptop no longer work. Fixing of the F keys would be great, but at least it is another way to switch the video output?

  Original title: screen toggle main F

  Some of my F keys on my laptop no longer work. Therefore, I can't turn my screen to another monitor (IE. TV.)  Fixing of the F keys would be great, but at least it is another way to switch the video output?

  Hello

  Have you made changes on the computer before this problem?

  Step 1: Check if you are able to use on-screen keyboard function keys and send back the same.

  Step 2: The following article can help you in the selection of the display.

  How to configure and use multiple monitors in Windows XP
  http://support.Microsoft.com/kb/307873

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Need to force the Flash Player installer to work even if it is out of date.

  There are a lot of PC in our network of the firm has to Flash Player version 11.1, on which is installed. We tried to get version 18 for all these PC, when Adobe released another update and all of a sudden that we used to push the update installation program will no longer work. We must be able to choose a single installer and work with it until all users in our system are up-to-date - regardless of whether or not Adobe releases yet another player update in the meantime. Is it possible to force the installer to work even if it is not the ABSOLUTE latest version? Otherwise, our users will not be just a version behind - they will continue to keep DOZENS of versions behind. I know that Adobe wants to force us to use the latest version of player safety, but in such a case the result is actually less of security.

  Any suggestions? Thanks for listening.

  -Brandon

  Hi brandonLancaster,

  Rate of normal release of the flash player is both - per month, the second Tuesday of the month.  Out-of-band releases occur when there are challenges of high-risk security bug, which we had recently.  What seems to have happened, is that client machines have been updated to the latest version, while you try to put a version prior to these systems. We can check this by looking at the FlashInstall.log file on a client computer that returned this error.  The FlashInstall.log file is located in the following location:

  • 32-bit: C:\Windows\System32\Macromed\Flash
  • 64-bit: C:\Windows\System32\Macromed\Flash AND C:\Windows\SysWOW64\Macromed\Flash

  You can send the contents of the file in your response, or download it by following the instructions that the specified item was not found. and after the URL in the files downloaded in your response.

  To avoid this scenario does not happen in the future, you disable the updates on the computers of your customers and then only deploy updates through your system of the EDSM.  To do this, you will need to deploy a custom file mms.cg with updates disabled for client systems.  The Flash Player Admin Guide examines various deployment strategies in Chapter 3.  Chapter 4 discusses managers features related to security, privacy, the use of disk space and so on, and the AutoUdpates section is on page 31.

  In addition, you can sign up to receive the Security Bulletin and the opinion here notice and Security Bulletins.  When a bulletin/notice is posted you would receive an email notification and can then go download the latest version, when it is validated and remove what to your client computers.

  --

  Maria

• "Save under" no longer works

  Since last week my CS3 version is no longer will allow me to choose "save under" and change the name of the file work on, the button is shaded on.  As soon as I choose a name of file already existing in the listed folder does the active button.  I can't just change the name of the file appears already in the field.  I think it is a virus, but the research is empty.  Given that I have not upgraded or changed lately, I'm looking for someone who has this problem.

  Mat-text:

  Are Photoshop and OS fully updated and have you performed routines normal troubleshooting (trashing prefs in now command-alt-shift/ctrl-alt-shift key while starting Photoshop, disable plugins 3rd party, the system maintenance like permissions repair, cleaning of the caches, validation of the fonts, etc.)?

• Time Capsule no longer works in conjunction with the ISP modem

  Hi everyone, thanks in advance for any help you can provide, and my apologies if similar topics have already answered - rushed for this post, so I did not have too much time to browse the forums - please point me in the right direction if other threads exist!

  I'm in the United Kingdom and Virgin like my ISP... I had my Time Capsule for almost a year now and if it had connected to the Virgin Super Hub (dial-up Modem mode), without any problems. A few weeks back, I started to notice the drops intermittent in the Internet, until it finally went down all together without apparent reason. Now I can no longer use the Network Time Capsule using a Macbook, laptop computer Windows, Smartphone, Tablet, or Console games (I can always connect to the network, but there is 'no internet'). After talking at length with Virgin they basically blame the Time Capsule and say they cannot help me because it is not their technology. Since cutting the Capsule and turning back on the Super hub wireless, everything works again. I tried the simple things like rebooting, check connections etc., but to no avail.

  I have a lot of backups on the time Capsule (I use it for work purposes), so I'm afraid to play with things too in case they are deleted, but now desperately need to get operational new... Should I look for to reset the Capsule of time and/or remove/reset the wireless network I created when the first set up (if everything resets is possible without deleting the stored files)? Any help or advice would be much appreciated... Sorry for the long post!

  Thank you guys so much!

  The first part is to ease your mind... the TC is perfectly ok with reset... nothing can be deleted by using the reset button or reset everything in airport utility... the only way to erase the hard drive is to clear its contents through the disk tab in the airport utility.

  We noticed a lot of problems with the WAN port on the TC... And a bunch of modems... This can happen a day or day 366... but once it starts, it doesn't go away.

  Connect the TC in the Virgin hub working in router mode full... you're going to fill the TC.

  1 factory reset the TC.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  2. make a new configuration of your Mac or iOS devices.

  With the wan of the TC plugged into the hub of Virgin by ethernet it should choose default wire bridge... If this isn't the case, manually change the configuration.

  3. once it is bridged leave the connection of the Virgin hub since the LAN of the TC port WAN... and see how it goes...

  If it works ok for the backup then continue to use it... If it's still questions... Please post screenshots... or consider to resume to apple... in the United Kingdom, you should have a legal guarantee of a couple of years... much longer warranty Apple offer directly.

• Reboot no longer works, need to stop/start manually

  Hello

  It just happened in the last two days. I have a Dell Inspiron 6400 with Windows XP SP3. I can no longer use the START / STOP or RESTART work more. When I clicked on stop or restart, nothing happens. I have to manually close and then start it manually. Once it began, all right.

  Could someone let me know what would be the cause of this problem?  I made changes in my hardware or operating system. I checked virus/spyware every day and are all clean.

  Suggestions or comments are much appreciated.

  Hello

  ·         How long have you been faced with this problem to?

  ·         Remember to make changes to the system?

  Method 1:

  I suggest to do a SFC (System File Checker) scan on the system and check if the problem is resolved. Follow the steps mentioned below.

  a. Click Start, click Run, type cmd and click ok.

  b. at the command prompt, type sfc/scannow and press ENTER.

  c. once the analysis is complete, restart the computer and check if the problem persists.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  I suggest you do a system restore to the point when the system worked very well and see if the problem is resolved. Follow the steps mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084/en-us

  I also suggest you to return the item mentioned below.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• The Windows media player 12 now playing mode. AutoHide controls no longer works. I toggle the AutoHide option and it has no effect.

  Tab Player Windows Media Player 12 options, there is a toggle called Allow hide automatically playback controls. Looks like he could have run the first two days I was with her, but no more. Is it possible to get it working again. It applies to the playing mode.

  Thank you, Orson-

  Hello

  Please use the Forums of Microsoft Windows 7.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  1. open Windows media player.

  2. in the "Library" view, click on the button "Organize", select 'Options '.

  3. the many tabs 'Options' dialog box is displayed. Click on the tab 'Player'

  4. under "Player settings", check 'Allow auto hide of playback controls' as you wish.

  5. click 'OK' to save your settings.

  Method 2:

  Uninstalling and reinstalling Windows Media Player:

  1. click on start and in the search type "Turn Windows has or not.

  2. click on "Turn Windows features on or off".

  3. search for multimedia and uncheck the brand in the face of Windows Media Player.

  4 restart the computer

  5. click on start and in the search type "Turn Windows has or not.

  6. click on "Turn Windows features on or off".

  7. go to Media features and place a check mark in front of the Windows Media Player.

  8 restart the computer.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• License key of PC alternatives run if no longer working and developer of the employer

  I lose my job.  Through my employer, I have Developer access.  Such as allowed under the terms of the license, my home PC is runing Windows 7 Ultimate 64 bit using my liscense work.  What happens when I have a job is no longer?

  I need to ensure reliable continuous computer access for my daughter to school age.  What are my options?  How much do cost?

  OEM version are bound to the first computer / motherboard and cannot be moved to another computer or if the motherboard is replaced it also cannot be reinstalled and activated. In short if the computer dies dies of OEM product with her keys.

  Ultimate version 'Full' is what you have installed, so a version product key "Complete" can be used to replace the key employers. Software cannot be reinstalled but as you see "Ultimate" is the most expensive solution and for the home, use only an overdose.

  Since you installed ultimate you cannot change/replace the existing key with a Home Premium or Pro product key. You need to reinstall Windows 7 from scratch. Less expensive, but that's the downside.

  College only: http://www.microsoftstore.com/store/msstore/cat/categoryID.37826100

  FAQ: http://www.microsoftstore.com/store/msstore/html/pbPage.LearnMore?Icid=Student_Main_LearnMore

  Also, it can hurt to find out what kind your use emplorer (MAK, KMS, Volume License).

  J W Stuart: http://www.pagestart.com

• The keys Home and end no longer work when I enlarge the program window

  As I'm editing, I often use the 'home' and 'end' keys on my keyboard extended to the beginning of the sequence, that I'm editing, or to jump to the end (I use the "home" button more often, but I always use 'end' from time to time).

  This behavior works as I expect when I have the window of editing 'active' (by clicking on it). The behavior works even when the program window is active, which is very useful. (And because the source window has a different content, I'm not surprised that it interprets the keys start and end for this image, which is also useful also.)

  The problem for me arises when I want to watch my full screen in the sequence and use the key to accent grave ('), alias the tilda (~), in order to maximize the window of my program. Now my image fills the screen and I can watch my sequence down to maximum resolution. But when I get to the end and want to come back at the beginning, the 'home' key does not work. I have to shrink the window until the key will bring back me at the beginning of the sequence.

  This bothered me for so long that I was editing in first, but I have never taken the time to see if anyone has a solution to this problem. Does anyone know how to make this work because I expect to? If having a keyboard shortcut to the beginning of the sequence is useful when you work with a screen that shows all the windows, the keyboard shortcut would be even more useful when you do not see what you are doing?

  Is this a bug? Can I ask it as a feature in the next update? Any advice would be much appreciated.

  Thank you!

  Activate the program monitor before switching to fullscreen (~).

• z index less than-1 no longer works after update of the player

  I am rebuilding my site to be HTML5 and I had all the Flash stuff works perfectly, where it is placed on the z-index:-2. However, after the Flash Player on my Mac 11.6.602.167 update, he's not less than-1, so it's getting placed above other content. With JavaScript disabled, the < img > No Flash appears in the correct z-index and I triple checked to make sure that the values line up logically. I only download each update, so it is possible that this question, if not my fault, occurred less recently.

  Well, the only working solution I could come up with was to wrap my indexed negative elements and assign this z-index:-1. So the SWF file is no longer at-2, it is 0.