RC of Windows 7 / Vista pointer of the ultimate mouse & Windows Update problem?
Have a Dell XPS 630i and made a new instalation of Vista Ultimate, and Windows 7 RC 64-bit and have the same problem with TWO operating systems after installation.
Performance and once installed, Windows Update, the mouse pointer will NOT click on the boxes to the left, updates to install specific updates, but will allow me to check the box to install all the.
It happens in the TWO operating systems.
Windows 7 also freezes on "restart" mainly on the part 'stop' to reboot.
Periodically, the system will also freeze if left running for 4-5 hours?
Thought it may be computer, rather than the operating system, but all the troubleshooting tests do show no problem?
any help would be appreciatd
Thank you.
Performed a clean installation on a computer, using a much more ancient, well-known usb keyboard and mouse and questions GONE!
After the installation, all the drivers, in good order, and ran to Windows Update to get all THE updates without any problem.
It could issue NEW hardware, as the keyboard and mouse have been included with recent computer purchase.
Tags: Windows
Similar Questions
-
p6310f: Windows Update problem
When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:
Mshtml.DLL loaded, but the dllregisterserver entry point was not found.
Shdocvw.dll "" ""
browseui.dll " " " "
MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.
Actprxy.dll Failed is not found
gpkcsp.dll " " " "
initpki.dll " " "
wuaueng1.dll"" "
c:\windows\system32\dllcache\wucltui.dll"" "
wuweb.dll " " " "
muweb.dll " " " "
I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?
Hello glockrow ;
Let me welcome you on the HP forums!
I read your post about windows update problems and wanted to help.
I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool
After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.
HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers. Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems. The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.
It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!
You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
What I recommend is the following:
(1) download and install Macrium reflect (MR)
(2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
(3) use the option to create a CD or a USB startup key
NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
Good luckI'm a volunteer and I do not work for, or represent, HP.
========================================================================
If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information. -
KB2676562 error 80070490 Windows update problem
original title: Windows Update problem
I'm unable to install the "Security Update for Windows Vista (KB2676562)." I get the error "80070490." I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.
I'm unable to install the "Security Update for Windows Vista (KB2676562)." I get the error "80070490." I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.
Have you tried everything in this article: http://support.microsoft.com/kb/958044
Method 1: run (Checksur.exe) system update readiness tool
If this method does not resolve the problem, go to method 2.
Method 2: perform a Windows repair installation
-
Windows Update problems 0x8024a005
problems of updating Windows 7 every time I try to update I get error 0x8024a005 next
OT:
Windows Update problems
Try the Windows Update troubleshooting tool
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-TroubleshooterHow to reset the Windows Update components?
http://support.Microsoft.com/kb/971058How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
(The steps # 1 a, 1 b, 1 c, 1 d and 1e)Disable third-party firewalls.
J W Stuart: http://www.pagestart.com
-
Error Windows Update problem "don't shut down your computer updates being configured"
OT: Windows Update problem.
Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?
Start here (ignore the title): http://support.microsoft.com/kb/949358
-
Windows Update problem - 0 * 80070005
* Original title: windows update problem
I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.
First of all
KB3138612 would be the last for a manual installation
The first would actually KB3145739
Homepage for all versions,
https://TechNet.Microsoft.com/library/security/MS16-039
After that you manually install you KB3153199
I would also like to before doing this,
Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.
4.5.2 is more consistent to have installed,
https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642
-
Windows update PROBLEM - always needs to change first the file distribution system
I am running with Windows Vista Home Basic Edition and are struggling to update my files after a clean reinstall. Finally got through many strategies, but doing so thereafter (once) noticed that the failures occurred each time that the "System of Distribution" file in the windows folder has not had been empty of logs and the previous downloads. Don't know what that means. Any ideas? Could there be a problem with the hard drive, processor, motherboard, short circuit? (Have no problems downloading on other computers in my house, my overall connection is good).
Thank you.
Hi Loraoshea,
You can read the following article and try to reset the Windows Update components and check if it helps.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Vista - Windows Update problem
I use Windows Vista. I went to 'Windows Update' and ' Check for Updates ' this morning. He ran two hours 'check updates'. I did a disk cleanup and restarted the computer. Same problem reappeared. Two days earlier, the process worked. I prefer not having to buy a new computer until early next year, but will get stuck if I can't get updates of security that we are supposed to have to March of the next year. If you can help me with this problem, I would appreciate it. Thank you.
Hi Susan,.
Thanks for posting your query to the Microsoft Community.Please follow the steps in this article and check if that helps.
You cannot install updates in Windows VistaThank you.
-
Window update problems, being of error "the server is not open.
I tried to open Windows Update, I get a message "the server is not open. Microsoft Fix It can not solve the problem. Can anyone help?
Alan-rr
Hello
1. what FIXIT did you use exactly?
2. is the computer on a domain?
3 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to go through the steps mentioned in the link and the Coachman.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
Method 3:
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
You can try the steps under I would fix it myself and check if it helps.
Hope it will be useful and keep us informed if you need help.
-
I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.
Log name: ApplicationSource: Application errorDate: 21/07/2012 10:40:20Event ID: 1005Task category: (100)Level: errorKeywords: ClassicDescription:Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program host process for Windows Services because of this error.Program: For the Windows service host processFile: C:\Windows\System32\wuaueng.dllTried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.SOLVED!Hello
Follow these methods.
Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll
To save the c:\windows\system32\wuaueng.dll file, follow these steps:
a. click Start, type run.
b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
c. When you receive the following message appears, click OK:
DllRegisterServer in successful c:\windows\system32\wuaueng.dll.
Method 2: If this does not help, you can reset Windows update components and check.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
-
Windows Update problem. Will not install the Silverlight security updates
I'm running the 32-bit version of windows xp service Pack 3. Windows Update: KBs 2514842 and KBs251827 download, but not install I am also running enternet explorer 8. When silverlight trys to install I get a message that it is on a resourse which is not available. I installed Silverlight a few years ago and have not used them. When I try to uninstall also says he's on a resourse which is not available. I opened the Control Panel on my computer and it says that it is there, but I can't seem to load. also have problems with Quicktime with the same problems. Everything else seems ok. I have the free version of AVG antiviris and protection to the current Ad on my computer.
Hello
I see you're questions fcaing install KB 2514842 and Ko 251827 "and Quicktime updates.
What is the full error message?
Let's try the following and check:
Step 1:
You can try the steps from the following link and then check if install updates:
How to clean a facility damaged Silverlight and then reinstall Silverlight
http://support.Microsoft.com/kb/2608523
Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the in the Windows registry: http://support.microsoft.com/kb/322756
Step 2:
Due to QuickTime, you can check this link:
http://support.Apple.com/kb/HT1925
I hope that helps!
If the problem persists, or you need help on Windows let us know.
-
Windows Update: problem webite cannot display the page
Just install a new hard drive and reinstalled the original XP Media Center operating system. I get this error when you try to get the windows updates: the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. Help, please.
@Whitebearmike
Question for you: what is the level of service pack of the operating system XP?
If no or anything under service pack 3, you need to get to service pack 3.
Run WINVER to check the service pack level.
If your XP is the gold (no service pack) version or even the sp1 or sp2 windows (iirc) then automatic updates will not work.
You must have service pack 3, but so that you have either installed SP1a or SP2.
Please review carefully. Make a backup of your system offline media (before & after each service pack).
To download service pack 2 - see http://go.microsoft.com/fwlink/?LinkID=186637
To download service pack 3 - see http://go.microsoft.com/fwlink/?linkid=183302
I invite you to do a mirror image of system backup once SP3 is correctly in place. Mirror-image backups are on the only good way to come back to a clean image, if and when disaster strikes.
You can use the following to install the service Pack XP
http://aumha.NET/viewforum.php?f=73
http://aumha.NET/viewforum.php?f=83
Note: MS is supported for Windows XP Service Pack 2 (SP2) ended on July 13, 2010.
-
Update the BIOS and Windows Update problem
Hello
I have a Pavilion laptop g7-2017us running Windows 7 Enterprise. October 18,2012, HP maintenance program informed me that he had to update my BIOS. HP maintenance program had not updated of the BIOS. See my BIOS is F.08 (dated 03/05/12). Manually, I been looking for the latest BIOS and found that it was identical to what is installed on my computer. It seems that software of diagnosis of HP gave me false alarms.
Question #2: I periodically install updates to Windows. I saw my story updates and found 2 failed: one who is 'recommended' and the other 'Important '. I looked at the error code and they are all two "80004004. I did google search and learned this is very serious problem b/c Windows is damaged. I tried using Microsoft 'Fix It', but it doesn't seem to help. Anyone have any suggestions on what I should do?
Thank you
Jeff
Open an elevated command prompt and type of each of these commands, press ENTER after each command, key when done try windows update in Control Panel. Don't forget to include spaces.
net stop wuauserv
rmdir /q /s %windir%\SoftwareDistribution
rmdir /s /q %windir%\system32\softwaredistribution
regsvr32 /s c:\windows\system32\wuaueng.dll
regsvr32 /s wuaueng1.dll
regsvr32 /s atl.dll
regsvr32 /s c:\windows\system32\wups.dll
regsvr32 /s wups2.dll
regsvr32 /s wuweb.dll
regsvr32 /s c:\windows\system32\dllcache\wucltui.dll
net start wuauserv
-
A fix with one click for Windows Update problems - how to reset the Windows Update components?
I can't check, download or install updates through Windows Update. Help!
Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Just click on the button below and follow the instructions.
For more details on this solution, read the article here.
-
Windows Update problem; Guard offering and 1 updated installation so that the closing
Whenever I'll turn off my PC it tells me it must update. It happened for about 3 weeks; the computer must be updated every day. He always does update 1 of 1 every time I shutdown, also when I turn on my PC I have look at the history of windows update and it says that the update was successful. Why my computer keep in day 1 of 1 if updates are actually succeed? Please help me here, I do not see this seems everytime I stop and I would really appreciate the help. Thank you.
Start Windows Update manually. Search for updates. When this particular update is displayed, right-click and choose hide.
Maybe you are looking for
-
Why T-bird update does not recognize as before e-mail lists?
The 2 latest updates of T-bird caused problems with my email. The last time, he has changed the way in which she acknowledged that e-mail lists - origin have me take more time to send messages. Update today (v. 32) now does not recognize my valid lis
-
Mid-2009 MBP 13 "slow on El Capitan
Hello I noticed my computer is running slowly, so I decided to download an EtreCheck performance - I removed an adware and MacKeeper - I don't remember I had that * app yet. I also cleaner on the Startup Items under/library folder, but the report sti
-
How can I completely remove Microsoft Virtual Desktop Manager to my system
Hi, looking at the internet I found Microsoft Virtual Desktop Manager, I thought it was just to change the wallpaper images, but later I read he could do other things, well after installation of my Toshiba satellite A100 which ran smoothly began to s
-
I can't open mail in my Inbox hotmail account.
Can someone help me solve this problem? Thank you!!!
-
0x8E5E0247 of error after installing a SSD Crucial of 512G on my HP Pavilion desktop computer
I get this error even after installing a 512G SSD-Crucial in my HP Pavilion desktop computer. I cloned it from my previous hard drive using Acronis 2014 edition. I don't know that they are connected. I called Crucial and asked if there were driver