Feature of Windows 7/8 mirrored drives on network?

Similar Questions

• Running windows from a flash drive

  How I laod and run Windows XP or Vista, a flash player? I have a 32 GB sandisk cruzer w/password protect on it.

  Cannot install Windows USB stick except Windows (Windows To Go feature) but you can create a bootable flash drive to boot and install Windows XP/Vista/7/8.

  How to create and install Windows Vista/7/8 using the bootable USB key, Windows XP or an earlier version to try Windows XP bootable USB drive

• Optional features of Windows cannot be enabled or disabled, hidden Windows updates cannot be uninstalled

  (!) Refer to this post: Windows Media Player enabled at startup interferes with sound, video, and other sources

  Obviously the Vista Home Basic SP-2 (optional) Windows features is more damaged than expected? None of these options has tried several times using different techniques can be enabled or disabled. I also had similar problems with uninstall some windows (and hidden) updates so I can reinstall them (including Service Pack 2: Windows6. 0-KB948465 - X 86) and 'can' be related.

  After the attempt to turn an optional feature on or off (to speed up Vista, is not necessary, or is necessary), in this case: "an error has occurred, not all features have been changed successfully." And it takes an unusually long time before it fails too? If I try to uninstall a Windows or hidden, in this case update: "an error has occurred. Not all updates have been correctly uninstalled"; but others were like "Silverlight" etc. If I try to reinstall Vista 5 languages SP-2 KB948465 Installer, I get: "the requested operation failed. A system restart is needed to roll back changes"ERROR_FAIL_REBOOT_REQUIRED (80070bc9).

  Even Windows updates failed to install Powershell 2.0, WinMF 2.0, and BITS 4.0 (read the post via the link above for more information). And if I do various attempts to troubleshoot and resolve these issues (and so on), the Blue error screen occurs finally.

  Other misc registry errors found; but were obsolete or left behind from the previous uninstall (not critical). Even in SafeMode with networking, all bet three errors have occurred (with startups and the services that are disabled; Microsoft services were 'hidden').

  The link in the installation of Service Pack 2 window (for more information on this specific error) goes to a Microsoft Support web page that explains this problem exactly as regards to SP - 2 mainly; Article: http://support.microsoft.com/kb/947366. But none of the solutions work or are applicable, since the system restore could not go back enough and I have not a Vista Home Basic CD (it is a second hand laptop that I will eventually replace it with another that has Windows 7, etc.). More Vista Service Pack 1 is already 'not supported' and SP-2 will soon follow. There is therefore no need to buy a CD to launch the "startup repair tool" (via another case).

  * Ironically the laptop works well overall, but some programs such as TVCenter6 are not able to function normally (DirectX. Net3 etc work fine) and require some resources that do not work due to the above problems. I can get on the internet using Internet Explorer 9 very well also (although Silverlight and Powershell etc. are required for certain functions to display or work).

  Please advise, Chris.

  Updated, I have invested in PC Health Advisor to 'fix' the registry problems; I was not able to manually set Windows features, specifically. When the computer reboots, I ran Windows Update and it worked again! Such that it auto-updated dot- Net Frame 3.5 Service Pack 1 (made in first), Powershell 2, WinRM 2.0, and BITS 4.0 etc.. I was so happy that I reinstalled Silverlight to Explore maps of Bing etc and tried again the functionality of Windows; no avail.? And he discovered damaged the account administrator; including commissioning elements "right-click" menu etc. (reinstall Vista SP2 manually failed too; almost from the beginning).

  To restore, I implemented a new admin account, renamed the one damaged, disconnected, connected to the new one, tested and deleted the renamed account; It worked! To retry the Windows features, the Admin account was again damaged. so I repeated these steps to restore Vista and had to address admin custom etc all over again just through (what is called "Aero" is enabled, but did not prevent the performance. Aero does not officially come with Vista Home Basic but gets 'active' to upgrade to Internet Explorer 9!).

  But in no way does this solve the problem base with features of Windows? I am amazed at how fast and responsive H.B. Vista Service Pack 2 is overall using less system resources; Despite this heart problem? And took a snapshot of what Windows Update installed completely. Fixed given by the support of third parties as a result of PC Health Advisor of the PC maintenance utilities (made by ParetoLogic I recommend instead if this ), has no also. And was not different from what I had already exhausted; stretching on the days. What I can possibly be "gone" which is at the root of the problem "of the Windows features" (as an option)?

  Update: I restarted PC Health Advisor several times: found and fixed more various defects of registry; found five obsolescent hardware device drivers (downloaded and installed updates for modem integrated, Realtek sound, "Value Added package" mass USB, Atheros wireless (WiFi); due storage manually remove the registry key for Toshiba VAP not in Control Panel?; restarted the laptop, did the account Admin is again ruined?) (in the same way; but not "Windows features" this time) And has been replaced with 'test' admin account for now. Revived the PCHA once again, found several flaws of registry; restarted; revived the PCHA (lack of only 1 minor registry this time and fixed), everything tested OK. Hard drive defragmented PCHA, put in place a third replacement admin account while remaining connected to test admin (deactivation and reactivation recent items starting reset not his "right click" menu). Running of new PCHA carefully before logging in a third new account Admin (health high, not mistakes; was then low mid level), connected off test, connected to the third replacement Admin account; realized that Windows Process Activation Service is not included in Vista Home Basic (SP-2). Windows Installer module did not work and can not be started; then I opened the Manager of tasks in administrator mode and managed to do the work. I downloaded the Vista CD torrent; but it requires a blank CD for this (and so on).

  Nothing has worked? The only solution found online so far is to reinstall Vista Home Basic Service Pack 2 edition, which is not possible (for the reasons). There must be a way to run a downloadable and OS utility repair record; When I discovered Reimage (point com) I peut buy as a last resort. If it does not reach the root of the problem and fix it, or if the Microsoft technical support cannot? I have no recourse but to buy another laptop (with OEM Windows 7 preinstalled; which is cheaper on this Toshiba Satellite A135-S2276 level).

  If I find anything else I will update this post (still pending from Microsoft to answer this question and other positions).

  Here are the latest steps taken to solve this problem that many there have also, as follows:

  (!) If you want to try this yourself, omit all deletes registry keys tried except «VistaSP2...» (for a total of 5 to 7 keys).

  (*) I kept those strictly for FYI purposes, while one who is also having this problem may avoid in go through what I had.

  (*) If I had known 'VistaSP2-... (KB948465) "is the correct name for the key (s) Service Pack 2, I could avoid all others.

  A ran the other (3rd party) utilities and other tasks, admin account is damaged is no longer; but root question remains?

  Tried to install standalone 5 new SP-2 languages. but not with the same "error in registry" repeatedly?

  Removed 50 updates beginning with the top of the list of MSW that Vista is back (all), because of the error in config.

  About 9 keys starting at the bottom this time and worked until I got to this key, that I could not remove the abduction:

  Update for Windows KB949939 did not have an uninstall option and may not be removed in high regedit.

  Changed permisions them key to 'force' a delete (changed owner, granted full control to the 'administrators').

  Removed other keys at the bottom of the install MSW list but standalone SP2 has not yet (in the same way).

  Found another potentially corrupt key with no. Uninstall KB938371. a 100 + instances of it and were withdrawn.

  Find more cases of this key (/ multilingual country) and changed "permissions" to remove all.

  A ran a search of all keys to make sure that all were completely removed from all categories; in the record high.

  Continued with the uninstallation of updates of DSM of the last upward; revived after all the few (which prompted the it).

  But still, the standalone Vista SP2 installer has failed in exactly in the same way? (following the removal of updates).

  Found and removed three updates DSM more with no uninstall option: KB937287, KB955430, Windows Search (4.0).

  The second key was part of the first? Removed a little past these, restarted, SP-2 (run as Admin) has always failed.

  High Ran regedit in mode 'permissions' to delete the keys to potential RETICLE; Search 4 uninstall appears!

  Deleted 4 research and restarted Installer but SP - 2 has not yet? Uninstalled four updates more in the list.

  The following entry is Service Pack for Microsoft Windows (KB948465), but he is damaged and cannot be uninstalled?

  This must be the problem, given that some of the deleted key had to do with "iCBS; has run high regedit.

  Used exactly the same procedure to manually remove the keys to Vista SP2 with care; but there were too many entries!

  Revisiting previous research, I realized that these keys starting with "VistaSP2 -" can be deleted. It worked!

  Service Pack for Microsoft Windows (KB948465) was finally removed from the list of updates installed after discount!

  Removal of two more MSw update to make sure it not more corrupt Scriptures; the Service Pack 2 Setup program has gotten away.

  But it suddenly abandoned shortly after the file copy process has started with the same error of registry; restarted.

  It worked! Everything was great when a system error suddenly interrupted the installation but 0x80070bc9 error has disappeared!

  The Setup dialog window prompted "0x800f081f' with more information on the Microsoft web site.

  Again running the preparation tool for the system Vista (Home Basic SP-2) update to fix "missing component CBS.

  Run the Vista SP2 installation program again, process installs other Microsoft Updates; but everything stops in the same middle point?

  Reran the tool again, rebooted, re-run Setup of Service Pack 2, same event occurs: error system 0x800f081f.

  CheckSUR log file lists 10 (f) CBS Watchlist missing package and 441 (f) CSI lack of deployment total key.

  According to the research done on this error, the only 'solution' again is to reinstall Vista Home Basic SP - 2 ed?

  And the two service items Microsoft Office Service Pack 2 Setup, I had already tried with the initial error.

  The irony is that the laptop works better than ever, but specific programs such as TVCenter6 will not work?

  Made of in-depth research on the error "0x800f081f" etc. (occurs with SP1 install also FYI); run the tool again.

  Remains found components for Vista SP1 not in the list of updates installed therefore some errors checkDUR.

  Used the same technique above to remove "VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000; iCBS but left.

  Again running PC Health Advisor, this time in high fashion, analyzed twice, found 14 registry errors and fix them.

  Who finally authorized the second error to install SP - 2. ("0x800f081f"); but still, Vista SP-2 does not go to reinstall?

  A run PC Health Advisor; found No registry errors either. If the Admin account is stilldamaged .

  I'll keep this account as it is until what I hope to be the final solution be found; and implement a new Admin then.

  Curiously, now it almost immediately invites "SP1 must be installed first" and is a sine qua non for SP - 2.

  As with Service Pack 2, SP 5 languages-1 has been downloaded; SP - x causes complete multilingual features to win at "overpoll".

  Service Pack 1 abandoned installation (already installed); ran high regedit and delete all sets of keys KB936330 (about 50).

  SP - 1 still wouldn't reinstall; used high regedit to remove the many KB936330 key sets and subs as possible.

  But Vista SP - x abandoned always with the same alert. only to discover 'integrated Service Pack 1 cannot be uninstalled?'

  Never after deletion so mamy keys manually, SP-2 (and SP1) was still as installed; in the box of Winver.

  After keys deleting both remaining SP - x, I realized it was unnecessary; and others deleted inadvertently.

  All this could not uninstall Vista Service Pack 2 (SP-1) to be (re-) installed to fix the underlying problem.

  After reviewing tried everything so far to see what can be done; I ran the uninstall of the elevated command line.

  But the result is the same; the prompt returned in a few minutes, but SP - x via GUI can take more than an hour?

  Conclusion: after finally getting the method calls BACK to (re) - install Service Pack 1 to work, it failed at the end!

  "Mode and on the process in an automated"undo"install", records were destroyed during the restart.

  Apparently, this version of Vista Home Basic was integrated (installable)? SP-1 and requires the CD (OS)!

  If I had known this all along, I would have improved (at least) to Ultimate. Which is exactly what the person I gave

  the laptop used far have done without any problem (less a video cable that fell off under the keyboard).

  How Microsoft can come up with such a version (SP - x) for (laptops), this are not equipped with CD?

  Because without it, there is no way to fix problems like this an 'off' (via Windows Upgrade also) internet.

  This case is classified as insoluble with regard to the original question.

  Hello

  wrong forum

  It comes to the installation of vista operating system instance

  try to repair:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

  or windows update:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I copy large files (> 15 GB) on several CDs or DVDs using features in Windows 7?

  How can I copy large files (> 15 GB) on several CDs or DVDs using features in Windows 7?  I tried Media Player, but simply, he stops and tells me that the file I copy is great.  I am looking for a way that will tell me to enter another dissk and continue copying until the file has copied at the end.

  You need to split the file into segments that will be adapted on the disks you are using.

  Windows has no characteristic that will do this for you. You can get a BluRay drive and disc http://en.wikipedia.org/wiki/Blu-ray_Disc, when you should be able to fit on a single disk file.

• Cannot access Windows 7 shared C drive

  I can no longer access the shared C drive of a Windows 7 computer. This is a new feature of Windows 7? (works fine on Vista machines)

  "Anyone can edit and delete files/folders on your C drive containing important files/folders so that Windows works properly."
  "Anyone can accidentally delete your Windows folder and cause your system to crash or accidentally move files to a system of cause of different folders become inaccessible."

  I don't think that this is a practical problem because the default permission level is read-only. In addition, Windows 7 (and Vista too) prohibits sharing the folder Windows, Program Files folder and folder users (other than Users\Public). I guess that people who want to share drives C have isolated their family environment.

• Windows 7 - partition windows on a new drive... travel startup gives nothing but the black screen and blinking cursor

  I am replacing a hard drive and move a partition Windows 7 from one disk to another.  The original partition of Windows 7 starts and works perfectly, but when I clone to the new drive, I have a terrible problem getting the new boot drive.

  On the original drive, the partition is the partition 3, on the new disk partition is partition 2.

  Both drives have the same size of cylinder.

  The new partition was created as a partition main with the same dimensions as the other and cloned in the whole content of the partition.  The files are all there in the new partition.

  He is currently not starting correctly, it starts the partition, but then he's here - I don't see Windows Welcome screen or anything - just immediately inadmissible black screen with a blinking cursor.  All I can do is reboot.  By pressing F8 at startup does nothing.

  Start of support for windows 7 and running repair features discovered the new partition as C: and CHKDSK C: points and gives a good report of the partition.

  BIOS settings have been lacking.

  The following commands were executed the repair windows 7 installation media feature:

  Of http://technet.microsoft.com/en-us/library/cc749177 (v = ws.10) .aspx

  BOOTSECT/NT60 C:

  And http://support2.microsoft.com/kb/927392

  BOOTREC /FIXMBR

  BOOTREC /FIXBOOT

  C:
  BOOT CD
  BCD ATTRIB S H R
  REN C:\BOOT\BCD BCD. OLD
  BOOTREC /REBUILDBCD

  The new partition was made active and is the only asset.

  If I erase and freshly installed Windows 7 on the partition, it does not start successfully, but if I then replace the contents of the partition with a clone of the other partition of work, it does not work.

  So that leaves me with a pretty good confidence that the problem has nothing to do with the charger starting and everything related to the content of the partition itself.

  I can't find more useful information for the boot partition.

  Any ideas?

  Moving Windows is not the best method.

  It is better to 'image' or 'clone' Windows to the new drive, using software such as Acronis

  True Imageor AOEMI Partition Wizard (free). I've used both (has a free version of Western Digital

  Acronis to use if you have WD hard drives).

  .Acronis.com/en-au/Personal/PC-Backup

  .disk-partition.com/Free-Partition-Manager

  (EDIT: I need to be careful.) Had redundant stuff here...;). )

  Dual-boot can be difficult in the best of times, but two partitions on a HARD drive...

  I don't think that you can select a particular partition in the BIOS to be your first boot option, only

  from the HARD disk, so it would be a blow to the top.

  See if there's useful information below-

  .sevenforum-Restore-Windows-7-Master-Boot-Recor

• Movement 10 Windows on an external drive

  Hello people,

  As a newbie in the world of Macs, my pride is a mid-2015 Macbook Pro (15 ''), whose hard disk has been partitioned in 2: for OSX and Windows 10. For many reasons, I want to spend the partition 10 Windows on an external drive - can I connect whenever I want to use MS products. I read that Windows 10 can run from a drive that is connected via the USB ports - so I plan to a thunderbolt drive.

  Any ideas on how I can go about moving only the windows on the external hard drive?

  I don't mind using a lengthy process to copy the entire contents of the macbook on the external hard drive, and then deleting the part OSX - if someone can make sure it will work. and can give me some instructions.

  PS my level of skill / confidence (on a scale of 1 to 10, where 1 = grossly incompetent and 10 = expert) on computer related things are 5.

  Thanks in advance.

  The best way to run Windows on a Mac using Parallels or Fusion of VM.

  You can put Windows on an external drive and you can use USB3 or love at first sight.

  Here is a video showing how to install and run Windows on an external drive. https://www.YouTube.com/watch?v=8FIvCQk2gP0

  Kim

• Windows PE found RAID drive on HP EliteFolio 9470 m using SSD Cache

  Hello

  I use HP EliteFolio m 9470-028TU suite below the specifications:

  -Intel Core i5-3317U 1.7 GHz

  -Mobile Intel QM77 Express

  -8 GB RAM

  -HDD 500 GB + 32 GB mSATA

  Installed Windows 7 Pro on RAID mode of SATA devices using SSD as Cache via Intel Rapid Storage Technology Software and works very well. Right now I have 11 all of the same model and you want to use Windows PE ImageX to capture the Image and deploy it on another laptop.

  Once I start using the Windows PE CD, I can't found any Partition of capture. I think it takes to load the driver RAID on Windows PE, but I have no idea and tried searching on google already.

  Someone at - it a statement for this problem please help. Thank you.

  Steve Jua

  SteveJua

  Use of the HP Client computer Windows PE 3.0 driver x 86 and x 64 Pack

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5271149 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dob_127784_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Customize Windows PE: Add drivers, packages

  http://TechNet.Microsoft.com/en-us/library/hh824972.aspx

• Satellite C660 - how to install Windows on the new drive?

  I have an old C660 of 14 months (2 months warranty!) and the HARD drive died quite suddenly.

  * 3 days works great
  * 2 days, got stuck at the "starting Windows".
  * Tried to fix with a System Repair (DVD) boot disk, but could not solve the problem (ran all night)
  * Start of DVD today and now the prompt of commands, each command "dir" on c: takes 20 seconds and try to copy files gives IO error.

  I'm going to buy a new HARD drive and install, but is there a way to get Windows 7 on the drive?
  There is no Windows disk supplied with the notebook... THERE is a recovery partition, but it died too.

  I don't want to buy a new copy of Windows when I already have a license.

  (I never have a backup complete incl. system, like the one and the only time that I tried to do that it was unable to complete the process, killing of many Virgin DVD-R in the process).
  I have most of my personal files backed up.

  Thank you

  The situation is quite clear. You don t have created the recovery disk and you have only two options now:
  (1) you can order the original Toshiba Recovery disk and install the original recovery image
  (2) you can get the original installation disc from Microsoft and install own OS

  In the first case, check it please http://aps2.toshiba-tro.de/kb0/TSB0202TA0000R01.htm

  If you take the decision to use option 2 Please note that your product key is useless and you have to pay for the new activation of license and the code. The sticker product key Microsoft belongs to the recovery image only.

  If you have any other questions you are welcome.

• HP Pavilion Windows 8.1 DVD drive problems

  My HP Pavilion Notebook PC (ENERGY STAR) product 15-n230us # F5W29UA, has problems with the DVD player.  I went to the Device Manager and found the following error code:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  I do know that if I made any changes that may have caused this error, I don't remember if or not he previously worked.  I think that it is.

  What can I do to fix this?

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Some features of Windows are not available.

  I have an IdeaPad p580 and I noticed that a few basic functionality of windows are not available. I use Windows 7 Home premium SP1 and everything else is usually straight out of the box. I guess these are the basic features of windows because I learn about them in an intro to the class of Windows operating system.

  When I try to use secpol.msc in the start menu, windows cannot find it, and also when I try to encrypt a file or a file this option is grayed out. I think Veriface is the encrypt function creep, or another software that is preinstalled is to play with things.

  No idea as to what could be the cause? Is my book misleading me, I may get to such a different way?

  Hi Kholt,

  Some features are not available in Windows 7 Home premium...

  http://www.SevenForums.com/network-sharing/202099-secpol-MSC-network-security-workaround.html

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  http://en.Wikipedia.org/wiki/BitLocker_Drive_Encryption

  Zehn

• additional features in windows 8.1 Upgrade

  not able to improve the additional features of windows 8.1 im... I tried to get the product key from the bios, but the specifications say its no good try another... Help, please.! thnx in advance

  Hello

  The product key that is stored in the bios is only for the existing version of Windows 8 that came with the laptop - to add other features such as Windows Media Center, you can buy the upgrade code.  See the following link for more details.

  http://Windows.Microsoft.com/en-GB/Windows-8/feature-packs

  Kind regards

  DP - K

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer

• How can I use the additional features of windows 8.1 license key

  I bought acer E5 - 573 G-34QR (Aspire e 15) provided with windows preinstalled 8.1, I activated windows 8.1 but when I try to use additional features of windows 8.1 it ask for the product key.

  It depends on what kind of functionality you are looking for.

  Moreover, the license key is on your BIOS, so you don't need to activate windows.

  here some difference on windows 8 versions, it's the same for 8.1:

  https://en.Wikipedia.org/wiki/Windows_8_editions

  All mentioned editions have the ability to use the language packs, which allows multiple user interface languages. [5] (this feature previously only available in Windows 7 Ultimate or Enterprise). However, in China and other emerging markets, a variation of Windows 8 without this feature, called Windows 8 unique language, is sold. This edition can be upgraded to Windows 8 Pro. [14]