Features INDEPTH CC network

Similar Questions

• No 'enhanced features enable' under 'Network' in the XMB

  Hello.

  Just bought the Blue Ray BX58 disk drive model. Connected to the wireless router. You want to register the player to use with Netflix.

  Follow-up to the guidance:
  > Connect the device to the home network (done)
  > Go to the XMB and highlight 'Network' (done)
  > Scroll down to "Enable the enhanced features" (this is not there...)

  None of the other menu options in the XMB has this selection.

  Please help.

  Thank you.

  Just tried a BX58 here in our area of laboratory and was able to update.

  This update came out two weeks ago and can help solve the problems that you may have, try following the instructions at the bottom and install this firmware update using a USB key.
  http://eSupport.Sony.com/us/Perl/SWU-do... dl = BDPBX58

  If this update does not try to reset your Blu - ray player to the factory, then connect via a LAN cable temporarily. If you are still unable to refresh content on the internet with a connection to the local network and the firmware updated plugged in while its still contact customer service and they may be able to help with your problems of network settings.
  http://eSupport.Sony.com/us/Perl/suppor... dl = BDPBX58

• Re: Satellite Pro L770 - networks detected but inaccessible

  Hello

  Yesterday I received my new toshiba, and since then, I can't connect to any wifi network. My model is the Satellite Pro L770. So I can find many networks, but when I try to connect to one of them, the connection fails:

  -My home network, which is of WPA/TKIP. I enter the password, and after several seconds, I have an error reported, with very little information about the causes.

  -A public network (free, a french access provider), which should actually connect and redirect me to an authentication page. But in this case, I have limited access and if I try to connect to google, I have a DNS problem, so I can't use public network too. Here, I get an IP address, but no gateway, it's maybe normal that I'm not sure.

  I must say that I have an Android phone with which I can connect to my own wifi. I tried to unplug, in order to avoid any conflict of IP, but the result is the same. My machines are ready DHCP, and my router has active DHCP mode.

  Any help would be much appreciated.
  Thank you.

  Hi lapsus63,

  Have you tried updating the driver WLAN and wireless network card appear correctly in Device Manager? You can download the latest WLAN driver on Toshiba WLAN official Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Satellite L770 is brand new model mobile phone, so there is not a lot of discussion about it here in the forum. What you can also do is disabling feature of wireless network adapter in the power management Windows for each power of energy saving profile.

  I hope that helps! :)

• Optimal, set up for the airport and the power network line?

  Hoping to any network gurus can advise on the optimal configuration for my network.  Current configuration is as follows.  1 Zyxel DSL modem configured to act as the router, PPPoE (not the bridge mode) mode, which is the default value.  2. Airport Time Capsule (ATC) connected to the modem via an ethernet cable plugged into the WAN ATC port.  ATC configured in Bridge mode.  Adapter network line connected to the LAN of the ATC port.  2nd line network adapter is connected to the opposite end of the House where the Time Capsule wireless signal is weak to non-existent.  Airport Express (AE) plugged into 2nd network adapter line.  I have a lot of devices (computers, printers, cell phones, DVR, etc.) which must connect wirelessly to the network.  Here are my questions:

  1. is it better to act as the router, rather than on the bridge, as I have to reconfigure the modem in Bridge mode and the most convenient way to connect using PPPoE Airport Airport?  Or is it not important?

  2. my hope is that by using the network adapters and the AE in the part of my house with the worst WiFi signal, I can push the range of my network and all devices to give a good signal.  My hope is that the devices will be connected to any signal is stronger.  At present, ATC and EI do not have the same network name (or password).  It is better for them to broadcast 2 differently named networks, or both would be they networks of broadcast with the same name and password.  Or is it not important?  Is how important it that the ATC is able 802.11ac, EI is just 802.11n?  For reasons not clear to me, even though I have several 802.11ac devices (MacBook Pro and Nexus5x), they are on the 2.4 ghz band (I even if ca is the 5 ghz).  Don't know if something is set up wrong on my ATC.

  All the equipment is running the latest version of the software (OS X, iOS, Android, etc.).

  Thanks for any advice.

  1. is it better to act as the router, rather than on the bridge, as I have to reconfigure the modem in Bridge mode and the most convenient way to connect using PPPoE Airport Airport?  Or is it not important?

  Doesn't matter, unless there is a special feature like the network option of comments on the airport... that would require that the airport be configured as router.  Airports are not known for their reliability, PPPoE, so it is best to have the modem or modem/router to provide the credentials of the PPPoE connection.

  2. my hope is that by using the network adapters and the AE in the part of my house with the worst WiFi signal, I can push the range of my network and all devices to give a good signal.  My hope is that the devices will be connected to any signal is stronger.

  If the two access points use the same wireless network name and password, Mac will do a nice job of automatically move from one access point to another to pick up the best quality signal as they move home... but iPhones, iPads, and most of the PC will not.  If you name the two networks as well, so you will need to get used to temporarily disable WiFi on iPhone, iPad, etc. When you move from one region to the other. Then, when the device is in the new location, turn on the WiFi and the device usually pick the strongest signal from the nearest access point.

  If you use names of separate network for access points, you need to manually switch networks on each device whenever the camera moves from one region to the other.

  Is how important it that the ATC is able 802.11ac, EI is just 802.11n?

  Well, you know that the Express is not "ac" capable, so any device "ac" close the Express will connect at low speed "n".  You will probably not notice a difference in respect if your Internet speed is less the Express features.  If you copy large files from one computer to another or backup on the network, then a device that connects to the Express is going to be slower than a device capable of "ac" that connects to the ATC.

  For reasons not clear to me, even though I have several 802.11ac devices (MacBook Pro and Nexus5x), they are on the 2.4 ghz band (I even if ca is the 5 ghz)

  Everything in the wireless is a compromise. In other words, to get something, you must give up another.  "ca" is used to that in the band 5 GHz, so if your devices are connect 2.4 GHz, they connect to a slower 2.4 GHz signal.

  Here is the compromise...

  5 GHz signals have capacities of speed much higher than the 2.4 GHz signals... BUT... 5 GHz signals are significantly weaker than the 2.4 GHz signals. So you're really not going to get the benefit of 5 GHz, if your device "ac" is in the same room or it has line-of-sight with the router "ac".

  If a device of "ac" is a room or two away from the router "ac"... the device will probably connect 2.4 GHz... because these signals are more powerful penetration of walls and other obstacles a lot better than 5 GHz can never hope.  It is also possible that the 2.4 GHz signal several rooms away the router will also be the fastest signal at this location, because the signal slows down more it moves the router.  5 GHz quickly signals really slow down.

• suddenly more elements network named WCIVANT04 now gone

  Never had this in the column before network.  Clicking on it opens a box that included "scan with Norton" (Norton failed to find all the files inside) and "connect to remote computer."  Anyway another box opens with a subject top left appearing as "Windows security" and required my user name and password to open the WCIVANT04 folder.  I did not either.  What is c?

  I keep the libraries where the unusual item was featured in the network segment and reopened and the unusual element, to which I refer was gone.  He has since reappeared then disappeared once more

  I answered my own question below... except that I have not added a file and print sharing resources... at least not that I know well, except if performed by mistake.

  

• BB of change for the smartphone blackBerry bold Verizon 9930 to another network

  Can someone tell me please a link that contains information about how to change my BB Bold 9930 brand OS to another other than Verizon's CDMA network. I'm new to the BB but have COMPUTER experience and a familiar with Android. I know there are a lot of sites with information on the release and OS unbranding inds and changing. A legitimate site exists where one might find the tools and instructions that can help the owner of a BB change its device without having to rely on a team of Technical Support of network providers who charge for a service that can be done by the owner? Sarcastic or useful comments will be greatly appreciated.

  Remove information staff to comply with theCommunity guidelinesand theterms and Conditions of use.

  1. it won't work on Sprint (Sprint allows on its only purchased network devices or brand for the Sprint.

  2. you can make it work on ATT and TMobile in the USA, but only at speeds of slower EDGE data. And, it is not an easy solution to operate on ATT or TMo, due to several factors, mainly including the 9930 requires books have different service from Tmobile and ATT, so it's a process of extracting the required service books and getting them on the 9930. And then it will be slow when not connected to WiFi.

  Bottom line... don't even try. The 9930 is a planned feature of CDMA network. It is very good for overseas travel occasionally and using foreign networks on GSM bands, but not for permanent use in the United States on GMS network ATT or Tmobile.

  Who help me?

  What network are you moving to?

• Manage wireless networks

  Windows 8 has removed this feature from the network and sharing Center.  We must seriously!

  When windows 8 is used for travel and accumulates a long list of wifi connections, he starts to remember do not network hidden.  I found a utility that allows me to edit and delete the old networks and after removal of all unnecessary networks he instantly connected to my wifi network hidden at home.

  Thus, a solution is certainly needed here.  Either they need do automatic network management working properly, or that we must have the ability to manage ourselves.

  I realize that the easiest way may not work for the original poster, if the saved networks are not displayed in the pop up column.  All mine because they were all multiple entries for the same WiFi network (at home) named liked: WiFi to the home Wifi at home, home Wi-Fi 2, 2 3, 2 3 4 Home WiFi... 2 3 4 5 6 7 8 9 10 home WiFi, etc.

  This isn't the only way to use the netsh command, but that's the way I think is easier.

  (1) open a prompt with administrative privileges - if you don't know how, just press the and choose 'command line (Admin).

  (2) type "netsh" (without the ' '), then press on - your prompt labeled "netsh".

  (3) type "wlan" and press - your prompt labeled "netsh wlan.

  (4) type 'show profiles' and press - This will display all registered WiFi profiles

  (5) tap delete profile_name = 'xxx' (use the 'around the profile name) where xxx is on the list of 'show profiles '.

  Tip: You can use wildcards - for example, in my example above I could get

  netsh wlan > delete profile name = "home."

  and it removes all in one entry

  or, I could remove them one at a time: for example netsh wlan > delete profile name = "Homepage WiFi" and to remove one only.

• How to re - combine a HD and SSD in a player of "Fusion".

  Hi all

  Well, this process has floored me know how much time lost, he created and how the problem occurred in the first place.

  I am wanting to do a clean install of El Capitan on iMac late 2014 retina with El Capitan with a 1 TB drive merger 10.11.6.

  Boot from an external hard drive with OS X utility disk 10.11.4, wouldn't let me simple deletion of the reader. He came up with the error message "removing logical volume of the logical volume group cannot delete the storage base logical volume...". »

  So I started to investigate this problem and found:

  estorage-logical-volume-from-the-Terminal http://Apple.StackExchange.com/questions/136590/How-can-i-Delete-a-partition-Cor

  Who publishes various other forum known as the best solution to the problem. Knowing that I hate to use the terminal, I dove in full anyway. I was reformatting disks on Mac for 20 years without needing terminals?

  I got so far as to remove the existing with logical group:

  sudo diskutil cs deleteLVG

  and now the HD and SSD drives appear on the desktop as a empty volumes (which is fine, I don't need to save anything).

  But now, try to use the:

  sudo diskutil mergePartitions HFS+ "Apple_HFS Macintosh HD" (and different combinations of drive locations)

  results only in "the data partitions are not of the same disc.

  This is what I see with the "diskutil list; ECHO; Cs diskutil list "command in terminal.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB 121.0 Untitled disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Untitled 999,3 GB disk1s2

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 DIS3

  1: EFI EFI 209.7 MB disk3s1

  2: Apple_HFS Mac Master Image 2016 499,2 GB disk3s2

  3: disk3s3 Apple_Boot Recovery 650.0 MB HD

  I have no idea how recombine the separate HD and SSD drives in one drive of Fusion, with which I can then do a clean installation of El Capitan. Can someone please!

  Also, how can quickly and safely erase a disc from Fusion in the future? I need to deploy a new image of master with all our software top one another 10 times, and I want to completely erase the readers for clean installs (with Migration Assistant for about 8 years, moving from a system has resulted in a lot of weird and wacky behaviour on our Macs) and it is time for a clean install for each of them.

  Again, I'd be very happy any help on this.

  -Alex

  Please read this message before doing anything. If you don't feel confident that you can follow the instructions, ask someone more experienced to help you.

  This procedure applies only to an iMac or a Mac mini with a drive installed in the smelter.

  You must read these instructions while no web browser is running, so either print them or load them onto another device before you start.

  1. all the data on the internal disks will be deleted, including Boot Camp data, which are not saved by Time Machine. You need at least two complete and independent backups. A backup is not enough to be sure. There are ways to back up a computer that is not fully functional. Ask if you need advice.

  2. you will need to start one recovery system other than the one on the internal hard drive (if he has one.) There are several ways to do so.

  a. If you have a backup time of the Machine (not a network backup), or a compatible Mac OS X installation on an external drive, then you should be able to start it by holding down press option key to start ringing. Select the external hard drive in the row of icons that is displayed. I mean by "compatible", an installation running on the machine. A version of Mac OS X that is older than the machine is not compatible.

  b. If you used Recovery Disk Wizard (or can use it now) to prepare a system recovery on a USB flash drive, you can start that by pressing the C button on the ring. No icons will appear. Startup will be much slower than usual.

  c. start the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe. Select a language, if you are prompted.

  Note: You need an Ethernet or Wi - Fi connection to Internet to use the features of recovery network. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  3. disconnect all other external storage devices.

  What happens then depends on what version of recovery that you are running.

  ☞ If the machine came with OS X 10.10 ("Yosemite"), 10.9 ("Swat") or 10.8 ("Mountain Lion"), and you're in the recovery of the Internet, please take step 4a and skip step 4 b.

  ☞ otherwise, go to step 4 and go to step 4B.

  If you are unsure which version of Mac OS X, the machine came with, search for it on this page.

  After taking these steps apply, you must have a reader of empty Fusion named 'Macintosh HD' on which you can perform a 7 step or step 7B.

  4. repair of the Fusion drive (see "Troubleshooting" on the linked page.) Quit disk utility and go to step 7A or 7B step. Skip steps 4, 5 and 6.

  4. in the OS X screen utility, select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  5. triple - click anywhere in the line below to select this option:

  N=Macintosh\ HD; for d in /dev/disk?; do o=`diskutil info $d`; for D in SSD HDD; do eval [[ ! \"\$$D\" ]] && grep -lqw "APPLE $D" <<< "$o" && eval $D=$d; done; [[ "$SSD" && "$HDD" ]] && break; done; diskutil cs create "$N" $SSD $HDD && diskutil cs createLV "$N" jhfs+ "$N" 100%

  It is a very long line, and you won't see it on the web page. Be sure to select the entire line, not just the part that you can see.

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  6. in the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination. Wait for a new line ending with a number sign (#) to appear. If nothing happens, press the return key.

  Quit the Terminal must be returned to the main screen.

  7. If you have a Time Machine backup, connect the device to backup and restore your data. If you have saved to a network like a time Capsule device, it must be connected automatically.

  7B. If you do not have a Time Machine backup, or if you can not restore from Time Machine backup that you do not have, install OS x Restore data later in The Migration Wizard.

  In the Internet recovery mode, you install the original version of Mac OS X comes with the machine. If you have upgraded the operating system on the App Store, you will need to do it again.

• I use a HP computer, when I try to load Mozilla home page says I use an iOS and does not load

  When I try to open the home page of Mozilla it says it can not open with an iOS and my computer does not meet the requirements. I use a HP computer. He used to pen without problem until I upgraded to version 33. I had to use my IE browser in order to send it to you. In my browser IE Mozilla home page opens correctly.

  PROBLEM SOLVED

  OK James, I was able to understand the problem. I use Avast Anti-virus program. It offers a feature called "Home Network Security" when I updated to the latest version, I thought I'd give this feature a try. I went and disabled this feature, and was able to get the Mozilla Web site to load properly. What I don't understand is why he just did with Mozilla's Web site and only if you are using Firefox. It didn't do it using IE or Maxthon browsers.

  anyway thanks a lot for the answer to my problem and try to solve it. When you said "it could be due to a proxy or even external software that changes the browser identifies itself asonline. It made me remember the change that I did with the Avast anti-virus program.

• Century of the IP camera front of link port

  I don't know if I'm in a good leave solitary Church correct bench - can't find any community I feel fits so here I am any help on where to actually get an answer would be wonderful.

  I'm trying to port forward for a century link actiontec k5000router to a netgear router.   I can do that if I'm on the liaison of the century network, but when I move to the netgear network IP address of century link returns an error that it does not.   Is it possible to port forward from the network of nothingness, or what I need to revisit the century link wifi to do.

  For the most part, we answer Apple router issues.

  Since you do not have a router from apple you better ask maybe in your area forum or support of ISP.

  But I can give you a general answer vague... no howto.

  I'm trying to port forward for a century link actiontec k5000router to a netgear router.

  Sounds fundamentally wrong.

  You don't port to the front of one router to another.

  If you double NAT the chances of work forward port are precisely ZERO on routers servants House grade.

  In a network, you have a router... No never two... unless you just S & M.

  Any port forwarding is made from one and the only router... a router to rule them all and in the darkness bind them. Apology of JRRT.

  So if you have a netgear wireless client you want to transfer to the front... It's easy... the Netgear must be used in WAP or WAN by-pass mode so it leads as a pure WAP and switch. All the features of real network will be managed by the actiontec and place.

• First Time Machine to NAS backup freezes at the same point, Console polluted by the same mistakes.

  I just configured my LaCie 5big Network2 act as a time Machine, but it is not back up correctly. When I run it always freezes at 14.70GB/237.71GB, even after deleting the backup and starting up again. I don't know if it of related or not, but the Console is littered with the same error messages (even if Time Machine is not running):

  

  If I stop the backup and restart it, it will get stuck after 7KB. If I delete the backup and starting a new one, it will get stuck at 14,70 Go again. This could be the cause? The NAS is configured correctly and firmware is up to date, disks are operational and functioning perfectly.

  My system is a 2015 retina MBP 15 "16GB / 500GB.

  Time Machine is a LaCie 5big Network2.

  LaCie can support this, but isn't Apple. the NAS can have its own propreitary features or a network can introduce the software is not designed for questions.

  If you want to use a NAS for backup, you can consider Carbon Copy Cloner as alternative

  For more information on the use of a 3rd party with network drive time machine see these article

  http://pondini.org/TM/2.html

  https://www.Google.com/?client=Safari#q=time+machine+over+network+drive

• Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

  I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

  I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

  I have a ct of 3940; I upgraded from W2kPro to XPSP2;
  I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

  I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

  Everything is beautiful... EXCEPT:

  I have no network function.

  Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

  Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

  Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

  To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

  After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

  Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
  A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

  Other devices that have the yellow flag are:
  1 Toshiba FIR Port Type-D0
  2 IrDA Protocol (hidden feature)
  3 TCPIP (hidden feature)
  and a network card, I try to install.

  Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

  A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

  Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

  My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

  The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

  As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

  What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

  I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

  Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

  I hope someone will have a solution/workaround solution that will solve this problem.

  In the meantime, I think that the next step is to start over and reinstall XP and try... again.

  I'd appreciate any help that anyone can gather.

  Hello Andrew

  It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
  Am I wrong?

  Sorry but I have no concrete solution to your problem

• How to get back in the car Fusion 3 TB to the original scores?

  I just had my Fusion 3 TB 2012 end iMac drive replaced under warranty and have encountered a problem after trying to create a 2 TB Bootcamp partition.  For some reason, I ran into problems installing Win 10 after having successfully created the partition, so I decided to use the Bootcamp assistant to delete the Bootcamp partition, but it threw an error message before the end!  That left me with a disc Mac HD 1 TB and 2 TB of space utility disk refuses to acknowledge, and I don't see a way to extend the Mac HD partition to fill this space?  Is there a simple way to restore the drive to its original state or what I need to use commercial partitioning software to do this?

  Apple did not provide an easy way to recover from this condition. Please read this message before doing anything. If you don't feel confident that you can follow the instructions, ask someone more experienced to help you. One option is to take an appointment 'Genius' on an Apple Store.

  This procedure applies only to an iMac or a Mac mini with a drive installed in the smelter. If one of the internal drives (SSD and HDD) has been replaced by a hot spare, ask for other instructions.

  You must read these instructions while no web browser is running, so either print them or load them onto another device before you start.

  1. all the data on the internal disks will be deleted, including Boot Camp data, which are not saved by Time Machine. You need at least two complete and independent backups. A backup is not enough to be sure. There are ways to back up a computer that is not fully functional. Ask if you need advice.

  2. you will need to start one recovery system other than the one on the internal hard drive (if he has one.) There are several ways to do so.

  a. If you have a backup time of the Machine (not a network backup), or a compatible Mac OS X installation on an external drive, then you should be able to start it by holding down press option key to start ringing. Select the external hard drive in the row of icons that is displayed. I mean by "compatible", an installation running on the machine. A version of Mac OS X that is older than the machine is not compatible.

  b. If you used Recovery Disk Wizard (or can use it now) to prepare a system recovery on a USB flash drive, you can start that by pressing the C button on the ring. No icons will appear. Startup will be much slower than usual.

  c. start the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe. Select a language, if you are prompted.

  Note: You need an Ethernet or Wi - Fi connection to Internet to use the features of recovery network. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  3. disconnect all other external storage devices.

  4. in the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history, but you won't need them. Load this web page.

  5. triple - click anywhere in the line below to select this option:

  diskutil cs deleteLVG `diskutil cs list | awk 'NR==3{print $NF}'`

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  6. in the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination. Wait for a new line ending with a number sign (#) to appear. If nothing happens, press the return key.

  Quit the Terminal must be returned to the main screen.

  What happens then depends on what version of recovery that you are running.

  ☞ If the machine came with OS X 10.10 ("Yosemite"), 10.9 ("Swat") or 10.8 ("Mountain Lion"), and you're in the recovery of the Internet, please take step 7A and proceed to step 7B.

  ☞ otherwise, go to step 7A and 7B step.

  If you are unsure which version of Mac OS X, the machine came with, search for it on this page.

  After taking these steps apply, you must have a reader of empty Fusion named 'Macintosh HD' on which you can perform step 8a or 8b step.

  7. repair of the Fusion drive (see "Troubleshooting" on the linked page.) Quit disk utility.

  7. Enter the command below as in steps 4-6:

  N=Macintosh\ HD; for d in /dev/disk?; do o=`diskutil info $d`; [[ ! "$SSD" ]] && grep -lqw 'APPLE SSD' <<< "$o" && SSD=$d; [[ ! "$HDD" ]] && grep -lqw 'APPLE HDD' <<< "$o" && HDD=$d; [[ "$SSD" && "$HDD" ]] && break; done; diskutil cs create "$N" $SSD $HDD && diskutil cs createLV "$N" jhfs+ "$N" 100%

  It is a very long line, and you won't see it on the web page. Be sure to select the entire line, not just the part that you can see.

  Leaving the Terminal.

  8. If you have a Time Machine backup, connect the device to backup and restore your data. If you have saved to a network like a time Capsule device, it must be connected automatically.

  8B. If you do not have a Time Machine backup, or if you can not restore from Time Machine backup that you do not have, install OS x Restore data later in The Migration Wizard.

  In the Internet recovery mode, you install the original version of Mac OS X comes with the machine. If you have upgraded the operating system on the App Store, you will need to do it again.

• Re: Windows Vista and 7 / error Code in Windows 7 Home Premium

  Just bought my first laptop and trying to connect to the internet via a Modem of GNET DSL via PPPoE. When I try to connect to the internet, I get a error Code 651: the modem (or other connecting device) has reported an error. Any ideas on a fix for this. Weird to get a new system and an error code so early.

  Overview of the system:

  Laptop Toshiba Satellite
  Processor Triple Core AMD Phenom (tm) II N870
  2.30 GHZ
  64 bit OS

  Sent by IPAD

  I'm 100% sure that this error is not caused by your new laptop. I m also 100% sure that all of the ports on your laptop work properly. You can check in the Device Manager. Is there a problem?

  This modem is is not known to me, but, in General, using the LAN cable should not have a problem if your modem is configured properly. With WLAN is the same.

  Have you tested the feature on another network LAN or WLAN (different DSL router)?

  By the way: what model of laptop you have exactly?

• Can't find the Registration Code to my HDTV KDL50W800B

  Try to find the registration code to my Bravia HDTV of W800B 2014 to connect to Essentials. I can't find the option "Enable improved features" in settings/network by the instructions given in support video.

  Hello wjbt, thank you very much for your message. We are more than happy to help you, but we would like to know the main reason of why you want to get a registration code for assistance. However if you want to save your Sony KDL50W800B TV model we recommend visit you: