Feed an AP1132 with PWRINJ4?

Similar Questions

• Feed not validating with iTunes more podcast

  My podcast feed is http://www.debozarko.com/feed/podcast/. It has been working well for the duration of my podcast from 2013.

  I have been using the Powerpress plugin from the beginning without any problem. For some reason, the iTunes store isn't picking up the my last episode (#110). The stream is valid on Feed Validator, but when I check it out in iTunes Connect, the status is "Validation Failed." This explains why it does not appear in the store, but I'm confused as to what could be wrong.

  I downloaded a record fresh and added the new download link on my blog twice, but still the same error.

  Any help is appreciated.

  The exact error in iTunes Connect is, "cannot read your feed. Bad http: 500 result code ".

  Curiously, it appears for the podcast subscribers well. I'm puzzled.

• can I feed my deskjet895se with my surface

  I wish I had a printer at the beach.  Are there drivers for my surface that will lead my old printer... a deskjet985se

  I wish I had a printer at the beach.  Are there drivers for my surface that will lead my old printer... a deskjet985se

  If you use Surface Pro then you try driver deskjet HP similar to what you use for your client application.
  If it's a Surface RT can do a read here: -.
  Printing from Windows 8 and Windows RT

• When I click on an RSS feed, I get this message. XML file does not appear to be any information of style associated with it... It works very well with Internet explore

  When I click on an RSS feed, I get this message. XML file does not appear to have any information of style associated with it. The same RSS feed works fine with internet explorer, any information would be helpful.
  Here are the first 3 lines from what I get

  < rss version = "2.0" >
  < String >
  < title >

  You open a new empty tab?

  Don't you see the text 'Click on the RSS buttonin the toolbar of navigation on this page?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Podcast feed broken but fixed, now how to refresh

  Been working on my feed podcast and with a redirect lost, things got screwed up on top of my iTunes page. Shows only a show. When I go in my Podcasts Connect is says there is an error

  Impossible to analyze your diet. Invalid XML: error on line 8: the content of elements must be well-formed characters or markup data.

  Your feed is at http://feeds.feedblitz.com/dothewoopodcast . It is served differently by your server depending on what application the request. It works fine in iTunes when subscribing and appears in FeedValidator with only small errors. Access in FireFox (my default RSS reader) it displays a web page. Podcasts Connect is not validated and is probably served with the version of the web page where the failure. It is a case of being too intelligent hosting service.

  However, as you don't need to access in Podcasts connect is not a problem. When you subscribe to iTunes appear three episodes (feeding has many episodes, but only three have compatible media); While new episodes appear almost immediately when you subscribe, the store caches the stream and check in a kind of spin, so new episodes normally take 1-2 days to appear. Given all this, it is likely that the store will show all three episodes in the coming days, as long as it does not fall on this system to serve a web page to some customers.

• HP laserjet pro m477fdw mfp: scan multiple Pages into separate files from document feeder

  How can I go on the digitization of several pages at a time starting from the document feeder in separate files?

  Hello

  Scanning pages multuple to separate files of the feeder can do with your device.

  Open the HP software under start > all App > HP > folder for your printer model.

  You can simply select Save in JPEG, the result will be a separate file for each page.

  In addition, you can select Save in PDF, click on more, and go to the Destination tab.

  Click on the drop-file Type and check the "Page" for each scanned page, then press OK and press the Scan button,

  Kind regards

  Shlomi

• No Autoscale with graphic hidden signals

  Hello

  I have a problem with the scales of a waveform graph. Joined a VI that illustrates this problem.

  The chart is placed on a tab - control, so it is sometimes visible, sometimes not.
  I feed the graph of waveform with sets of data of different wavelengths and amplitudes. For some reason I got off Autoscale. But after feeding the chart with the new data, via the property node I want the chart Auto-scale once, then I read the scales to do some calculations. If the chart is visible, everything is fine, but if the tab control - hides the graph, the balance isn't autoscaled.
  What would be the trick to autoscale the graph when hidden?

  Welcome, Dave

  The help of LabVIEW:

  Note  LabVIEW does not include hidden locations when you autoscale the axes of a chart or table. If you want to include the hidden when the plots you autoscale, make transparent hidden plots instead. Right-click the caption of the plot and select the color from the context menu to change the color of the plots.

  The above probably applies to charts that do not appear, although it is not said explicitly.

  As an alternative, you can:

  • AutoScale once this tab page is made visible.
  • Have another graph in a remote section of the front panel. Set to visible, but due to the size of the window, it is not in the frame. You can then copy the scales of this chart on the chart located on the tab page.

• Satellite 5200 - powers automatically (sensor/hall-magnet)

  I have an automatic feeding weird issue with my laptop Satellite 5200.

  * Situation. *
  1 laptop is turned off and the cover is open
  2. I close the lid while the laptop is always off (just battery is connected)
  3 result: the laptop automatically and boots: how weird is it that

  It has something to do with the magnet that is integrated in the screen/lid place/located near the right hinge. When you close the magnet is close sensor (hall sensor) and apparently, this magnetic field causes the cell to initialize. Normally, if your laptop is running and you close the lid of your laptop computer goes into mode sleep with this technology (magnet and sensor). My laptop works well if she runs and I close the lid. Then it goes on standby as expected. When I opened the lid he returned from sleep mode.

  The issue I am facing now is really just when I close the lid, * while the laptop is turned off already *.
  How do I fix this behavior stupid - how to adjust the magnet/sensor so it has not received the impulse to automatically feed upward.
  The solution must be around here somewhere. And I don't think it's a software configuration problem, because the laptop is turned off when this occurs - so no Windows is running, it is not in standby or hibernation mode.

  Your help would be appreciated.

  Thank you very much for your advice!

  Hello

  If he s really a lid switch problem then it would mean that there is a mechanical problem that could be solved by a service partner
  But I think that this is not a sensor problem possibly display frame/cover touch the power button (that's my opinion) and that feeds on the new laptop

  Just a question; What is cable LAN connected to the laptop when the laptop automatically?
  If Yes, then I would recommend checking the BIOS if the Wake up on LAN option could be disabled
  In many cases, it would lead to the reactivation of the laptop

• Charger for Toshiba Satellite

  I have an old laptop from Toshiba (Satellite 2060CDS), and there is a problem with the connection of the adapter and the motherboard, so I can't feed the machine with her or charge the battery.

  I heard that it would cost a LOT more the machine is interesting to replace the motherboard, but it has been suggested that if I buy a battery charger separated, I could operate the machine of the batteries that I have.

  I found the part I need (code PA2488U) and I can find loads for sale in the United States, but NONE in the United Kingdom - is - anyone know where I could buy get these?

  Hey,.

  You can buy spare parts from the United Kingdom of Hugh Symons, their phone number is 08708906000 and that they are allowed.

  See you soon

• Equium A60-155 won't start and turns off

  I have a celeron Toshiba EA60-155 355 / 40 GB / 512 MB of ram and for months has been very difficult to start. It takes up to 10 attempts to start properly, because it feeds normally but with a white screen. Once started it USUALLY works fine, but sometimes becomes empty when you use it. This happens randomly and not necessarily by doing anything CPU intensive.

  I would like any advice or solutions, as it's crazy of me and my family!

  Dave Marshall.

  Hello

  Not easy to say why it happens. You should first check if it s not a software problem.
  Try to update the display driver. If it doesn t help you recover unity with the Toshiba Recovery CD. After this procedure, all should work properly. But if the problem persists then I guess it's a hardware fault.
  In this case we need the help of service

• power cable 9862

  Hello

  I want to use a module NI9881 MAY require an additional power supply (Vsup PINS of the DB9).

  Moreover, I CAN feed the cable with a positive and a negative pole, in addition to the DB9.

  This positive and negative terminal pins to the power supply, or what I directly plug the Vsup are?

  Thank you!

  If you have a cable power OR like this: POUVEZ cables with power terminal

  Then the + terminal on the cable is connected to Pin 9 and Vsup.

  -Terminal will be connected to GND.

• can I use my DAQ on two different computers?

  Hello.

  Sorry if this may seem a stupid question, but I'm trying to save money lol. I have two test stations, each station has its own computer and power. Power supply powers a certain device and the computer communicate with him via a converter USB to RS422 series. I use the 2 analog outputs on my NI USB DAQ 6008/6009 controls 2 power supplies. AO 0 to check power supply to the station #1 and 1 A0 to control the electric power in the #2 station.  I can control these 2 feeds very well with a computer connected to my DAQ. But I need every computer to run trials independently. I don't have that 1 DAQ but 2 computers, is there way to use this data acquisition on both computers?

  Thanks for any help!

  I found the easiest way for me to do this is to run two VI on a single computer. Since I have 3 usb ports on my labtop, I can use 2 of them to communicate through series with two of my devices and the 3rd for the acquisition of data.

  Thanks Knight of NOR to make clear on the use of 2 computers.

• Pressure sensor ground loop problem

  Hello

  I have an interesting problem, I hope someone can help me with.

  I'm measuring pressure with a pressure sensor.  We see a lot of noise with the measure, and I believe that we have a ground loop.  I have checked the noise is 60 Hz.  What is interesting is that the case of the pressure sensor is connected to the Earth.  When we put on the sensor of metal pressure in the booth, we see the noise.  When disconnect us the stand noise pressure sensor disappears.  The stand is connected to the Earth.  I'm feeding the sensor with a 24V power supply which is also connected to the Earth.  I think that this is the ground loop.

  My problem is that the 24V power supply should be grounded for safety and the I cannot isolate the ground pressure sensor.

  I attached how I got the system wired.  How to connect up to my analog input module pressure sensor OR 9215 to break the ground loop?

  Thank you

  Dan

  Ahhhh Yes,

  I have solved this problem.  It is a ground loop.  I had the field related to 2 places.

  We have removed one of the references on the ground and poof everything worked fine.

  One of the problems I've found is a reference of external power supplies and others do not.  If you provide an additional reference to the Earth... Ground loop!

  Ground loops can be mean terrible things.  According to my experience, they are the number one electric goofiness and the noise causes.

  I have compiled some resources on my website to help people

  http://www.autosofttech.NET/resources

  The best is field wiring and considerations of noise for analog signals

  If you want the final word on the subject see this book

  Techniques of reduction of noise in electronic systems

  Hope that helps!

• Printer will not print a specific document

  We have a HP Officejet Pro K5400 colour printer that we use for office color printing.  I have problems printing to a PDF that I printed several times with this printer.  It is a document, I created in publisher and tried to print directly from publisher with no luck as well.  It gets only ready to print and then feeds the paper with no impression.  I can print any other documents very well with the printer.  I unplugged the printer to do a hard reset.  Help!

  Thank you.  I have finished the download of the latest version of Adobe (tips of another post) and restarted the computer and the printer... so good!

• A pulse counter 6008/6009

  I have three flow meters of FPR133 I am trying to display in LabVIEW.

  I have attached a document containing all the technical characteristics of the flow meter. But the range is 0.5 to 5.0 GPM (25 Hz to 225Hz).

  During programming, I was able to generate a signal on a frequency generator (simulating a flow meter) and was able to install labVIEW to measure the frequency. Everything seemed fine.

  When I hooked the real flowmeters data acquisition is not read any signal? Currently the black wires of the flowmeters are connected to the (-) supply 10V and the MASS on the side of digital data acquisition. The red wires are connected to (+) supply 10V. The white wires go directly to P1.0, P1.2, P1.1.

  I returned and tried again the frequency generator and it still works. It seems that flow meters send a signal 'dirty '?

  Offset CC gives me questions? Do I need a coupling AC capacitor?

  OR

  I also noticed in the specifications of flow meter that he they suggest a resistance to drop 5-10 k between the black and white wires. Is it necessary with the acquisition of data 6009 I use? I know there's a resistance to pull-up 4.7 K internally.

  OR

  I have a problem with all my reasons tied together (analog, digital, (-) Supply, AC 10V, pregnant...)

  Any ideas would be greatly appreciated. I can provide more information if necessary. I will work to solve this problem all day. Thank you!

  Try to use the pull-down, but more important is the question that you are using to power the meter with 10V.

  The output of the meter signal will also be 10V which exceeds the specifications for digital inputs (~ 5V).

  Then feed the meter with a 5V source.

  -AK2DM