Field names in batch process

Similar Questions

• Please help with the batch processing of Javascript.

  I'm looking for batch processing a large number of PDF files.  I need to reduce the font size a bit concerned of form fields on all of these PDF files.  The name of the form fields are Texte8, Texte15, Texte16 and Texte17. I could also affect the size of the font to a smaller size.  What is the script I would use on the way to this topic?

  You can use something like this in a JavaScript Execute action:

  var fieldsToChange is ['Texte15', 'Texte16', 'Texte8', 'Texte17'];.

  for (var i in fieldsToChange) {}

  var f = this.getField (fieldsToChange [i]);

  If (! f) continue;

  f.textSize = 10;

  }

  Of course, you can change the size of font you want to any other value (use 0 if you want to set as "Auto").

• News station using the batch process model

  Hello

  I have a test sequence using a model of sequential processes and station information by using the following, I.

  RunState.Root.Locals.StationInfo.StationID

  RunState.Root.Locals.StationInfo.LoginName

  I create a new test sequence that uses the model of batch process - when I try to enter the information Station data using the syntax above I get the following error

  Name of variable or unknown property 'RunState.Root.Locals.StationInfo '.

  Can some advice please if I go to the wrong place when using a model of batch process?

  Thank you best regards &,.

  Shane.

  Batch and parallel models you can access this information using:

  RunState.Root.Parameters.ModelData.StationInfo

  -Doug

• Sequence of batch processing with JavaScript

  Hi guys,.

  I have a batch sequence that will not save the original files. I get a message "the file may be read-only or another user can open. Please save the document under a different name or in a different folder. »

  However, another sequence of batch processing that runs on the same file records very well so I know that no one else is open and it and I know that I get this folder.

  The sequence that will not save the file defines opt them open and JavaScript inside collapsing many bookmarks.

  Is there something to have JavaScript in the batch sequence that does not allow this save?

  Thank you very much

  Ken

  You might have clicked the tiny icon next to the command, an icon of the small window. This causes the JS to open console window every file is processed. Stupid, right? If this is the case, try clicking this icon again while disappears and then run the batch again.

• Batch process PDF Copyright metadata using JavaScript

  Tutorial of Thom Parker "JavaScript in batch" it is said that metadata copyright notice can be set via

  This.info.Copyright = 'YOUR c-STRING ";

  However, Adobe Acrobat X Pro on Mac OS X, this does not work for me, as for example

  This.info.Author = "author here DΘfinir;

  does not work. I even tried to "this.info.CopyrightNotice" - which has been emphasized in other tutorials - but nothing works. Anyone happen to know if there is a way to set the three fields 'status', 'copyright law of information' and 'copyright url' JavaScript in a sequence of batch processing?

  Thank you so much in advance.

  Code will add metadata customized to the subject of information that you want to add metadata XMP standard such as shown here: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.403.html

• where can I find default user to IOM form field names

  Hi all
  
  
  where can I find defalut user form field names to the IOM. BCZ I want to use this name to create tasks for updating the form user field for processing the form
  
  In my case I want to know the user of the status of the user domain name
  
  
  plsss help me in this

  see if you want to update the values of the fields defined by the user of the form for the user to process the form then to design console go to the Administration tab-> user defined scope - search for folder "Users" in this form, you can get your name in the column for the field of the UDF.

  It's USR_UDF_CELLPHONE add this entry in the definition of research: Lookup.USR_PROCESS_TRIGGERS and the name of the task for example change of cell phone.

  Try this and let me know. It should work.

  Thank you
  Patricia

• Images of different dimensions of batch processing

  Hi all!

  I tried to do for a while and I'm stumped, so I would like to know if it is still possible. I'm trying to understand how to create an action that...

  • Takes a jpg file
  • draw a shape
  • mask of the image
  • Adds another form

  So that I can batch process a ton of images.

  I managed to do something like what I'm after, but the thing I have a problem with, is that the original images will be have different dimensions.

  I have attached a picture for example that would be the original (start.jpg), which is the desired end result (done.jpg) and the .psd (link)

  IF to do a step at the heart of the action where I need to intervene and to resize the image flat slightly to fit the canvas it will save even one time charge.

  I know the opening and registration will be supported of the functionality of treatment using batch and the result must be a jpg file.

  Any input is welcome!

  Here are the files of work - http://mikeebee.com/dl/action-test.zip

  Thank you very much

  This Script would choose one or the other Action depending on whether the active image is wider than it is tall.

  You must insert the correct names for appropriate Action and the defined Action, however.

  // 2012, use at your own risk;
  #target photoshop
  if (app.documents.length > 0) {
  var myDocument = app.activeDocument;
  if (myDocument.width > myDocument.height) {
            app.doAction("Canvas landscape", "bfunk")
            }
  else {
            app.doAction("Canvas portrait", "bfunk")
            }
  };
  

• FDQM replace it with security in batch processing does not

  Hi all
  
  I know that there is a recent post on this subject (October 2010), then of the apology for opening a new thread, but I have tried everything and cannot get this to work.
  
  We use version 11.1.2 for HFM and FDM and you want replaced by the method of security in our batch, as some data will be entered manually in HFM and we do not want this deleted when the package is run.
  
  I tested using RRS.txt, RS.txt and R3.txt as the last part of my batch file name and have inserted a code in the action script LOAD to the output of the objLoadParam.varOptMethodValue which controls the value of the load method. In any case, it returns "0" (0 - Replace). To test again, I tested with RR.txt, RM.txt and RA.txt, and in these cases the return value is '0 ', '1' and ' 2' respectively as wudl expect (although she does not mention the possibility of using the 'Fusion' in the documentation).
  
  This could be a bug in the adapter for 11.1.2?
  Someone has seen this before and have a way to fix this?
  
  We believe that we have a work around, but it is not really ideal, if it is a feature that should be there by default.
  
  Thank you very much
  Stuart

  It is currently as a product enhancement request. It will be added at a later date as a load method for batch processing, however it is not currently available.

• Batch processing issues

  I'm scanning a large volume of slides. I'd like to be able to batch process them for the basic settings. I found more frequently than scans of opening, adding a curves layer and hit the auto button does a good job at the beginning of the restoration of the color. I could add an action and that with the exception of a question of batch processing.

  ISSUE - when I check "Override Action" save under "orders", the File Naming section is grayed out. So I did not have the ability to specify the naming of files when I run a lot.

  QUESTION - It seems that when I check "remove color profile warnings" the batch will continue using the color space of the image to be processed, not the working color space. It's fine for what I do now. However if I wanted to use the working color space, I simply include a step in the action to convert the color profile of the job profile?

  Dale

  ISSUE - when I check "Override Action" save under "orders", the File Naming section is grayed out. So I did not have the ability to specify the naming of files when I run a lot.

  The Destination drop-down list control if these fields are assets or grayed out, if you change from Save & Close file you will be able to change these fields. Note, however, that if you use the folder option, then you will need a step save slot in your action otherwise they will not be saved.

  If you want to automatically convert the images you open the color profile of work then go to Edition-> color settings and change the second dropdown RGB to convert RGB working.

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug

• Variable overall station by the object to be measured using a model of batch process

  Hello

  I have 4 DUT which is tested by using individual ports of com I use global variables Station 4 to store 4 Com ports - COM port assignments are in no particular order and vary depending on the test PC station.

  Example:

  S1 = Com12

  S2 = Com14

  S3 = Com10

  S4 = Com9

  Using a model of batch process I want to test DUT all at the same time: I'm trying to understand what is the best/better way to S1 to S2 for UUT2, UUT1 and so on!

  Any help appreciated.

  Thank you best regards &,.

  Shane.

  The easiest way is to use the property Runstate.TestSockets.MyIndex to index a table.  Each socket of the batch will get an index (from 0 to n - 1, where n is the number of sockets) when it is created.  You can create an array (of strings? I can't tell if you just have channels or need a container) and use the property for the index in the array.

• Model of batch processing is suspended when Windows is locked

  I'm running the model of batch processing with 5 Sockets.  When the Windows form is locked, the grip of the model after all the test sockets have finished the model batch step titled 'Sync with controller - AfterPostUUT. '.  This call is part of the ManagedModelSupport.dll.  I have TestStand 2012 SP1 running on Windows Server 2008 R2 SP1.

  I have attached a few screenshots.

  
  

• Batch processing dialog box USE information

  I need to customize the model of batch processing with CVI. Need to add 2 for example several channels of serial number of the batch on top, remove the status message, bottom of socket - don't show the Seraglio etc number box. It looks like the files that I need to change are batchuutdlg.c and modelpanels.uir.

  Found that the source code is under "Instruments\TestStand National 4.1\Components\Models\TestStandModels." What are the best practices to make the change to the regulations provided the code? Also what files will be needed, if all the updated code will be then be in the same directory?

  Please notify.

  It depends on what version of TestStand you have.  Back in the day (I think that pre 4.0) there to be users and the folder OR in each of the folders TestStand. You had to copy into the users folder and make changes there.

  Nowadays (certainly with 4.5, but not sure about 4.1 knowledge is true for 4.1.1), you would put any change to the public folder.  If you go to: C:\Program NIUninstaller Instruments\ you will see a link to something called the TestStand Public folder.  This file should be structured like the file.  The same and all directories.  When you change the native code copy you on public directories and this way you always have native original code if you need to go back.  In addition, it handles situations where you might not be an administrator on a computer - you cannot edit files in Program Files.

  If you look in the search directories in TestStand, you will see that it refers to the Public folder first, then the Aboriginal file.  In this way that it captures your code always updated first.  So if you were to spend the SequentialModel.seq in the public folder your way would look like this: C:\Documents and Settings\All Users\Documents\National Instruments\\Components\Models\TestStandModels\SequentialModel.seq (for XP).  But you would still have the (unchanged) SequentialModel.seq on in the Aboriginal file.  When a sequence file loads and will enter the process model, he looks first in the public record and captured this process template.

  In your case, it would be one of the files you mentioned.  Well I think that you would like to move all of the CVI code above, so it can stay with the prj.

  When you go to deploy on the first tab, there's a checkbox called: deploy files to the directory Public TestStand.  If all of your customizations will now be included in the deployment.  It will put their new in the public folder on the deployment computer and the search directories should be similar, so you would be good to go.

  Hope this helps,

• Access to information USE testsocket in the model of batch processing

  Hello

  I have a custom reminder pre-batch TS 4.0, which fills in the serial numbers, part numbers, etc for the DUT being tested (using a model of batch processing). These variables are found in the pre-batch settings. However, I can't understand how to access these values further reminders (SequenceFilePostStepFailure, for example).

  In the pre-batch sequence, I can access the serial number for UUT4 using Parameters.ModelData.TestSockets [4]. USE. Serial number. But I can't find the object of ModelData when you don't the pre-batch and tried to look in the root, runstate, hand, sequence, etc., without a bit of luck.

  Any thoughts?

  Thank you

  Chris

  You can find it at:

  RunState.Root.Parameters.ModelData

  There will be only at runtime, and only when you actually run using the model of batch processing.

  Hope this helps,

  -Doug

• Get name of running process model

  Hello

  I would like to test during the execution of my sequence

  (1) if there is a process model, who started the sequence

  (2) the name of the process template that was launched

  Anyone know the sentence?

  Cause I tried this in a stage of 'if' and it doesn't seem to work correctly:

  RunState.IsProcessModel & RunState.Execution.GetModelSequenceFile (). AsPropertyObject(). Name == "Single Pass".

  Thank you very much DowNow... It works very well!