File/Codec problem

Similar Questions

• just today, when I try to play AVI files from my digital camera... no sound plays on my pc with media player v11... I suspect it's a codec problem, but how do I know for sure?

  just today, when I try to play AVI files from my digital camera... no sound plays on my pc with media player v11... I suspect it's a codec problem, but how do I know for sure?

  Hello Jorstar1,

  Thank you for your message.  Windows Media Player 11 supports .avi, but compression can dictate whether he will play or not.  This is very probably a Codec issue, you can perform a websearch for a Codec that will play any avi compression.
  Please let us know if it did or did not help to resolve this problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Also cannot open file Association problem: Addor remove problems, security centers of basic information about computer, etc. due to rundl.32.exe

  I have a program with: file Association problems: also failed to open: Addor remove problems, security centers of basic information about computer, etc. due to rundl.32.exe.

  I put security update, Internet XP but still the problem!

  Hi StanleyMcDowell,
   
  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.
   

  Follow the steps listed in the article below and check if the problem is resolved.

  Cannot find the Rundll32.exe file when you open Control Panel

• Windows® XP file Association problems? Copyright 2003 - Doug Knox? his files work?

  Windows® XP file Association problems? Copyright 2003 - Doug Knox? his files work?

  It is wrong to go all that is your problem.

  I have instructions to run the Doug Knox fix as a copy/paste of my notes, I'll never have to type it once again, which means that (at least for the EXE usual file association problem), I like to use, but we don't know what your question is.  In fact, the majority of the stuff I answer here is just a copy and paste, I have fixed some things so many times...

  Here's what I have copy and paste about afflicted EXE file associations:

  Looks like your Windows file associations have to dispose. This means that XP doesn't know what to do with files by looking at the file extension (.exe for executables)., .doc for MS documents, etc.

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed)

  original title: codec

  When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed) how can I fix it?

  Install the codec.  Really.

  Something like GSpot to understand that one.

• Weird file Association problem

  I have a new and unusual file association problem.  At the start, whenever the PC is turned on, this file association window opens:

  

  Here's the weird part: "Remy" is the name of the main user of this computer.

  In recent days, before that the problem began, I had worked on some of fixing nagging problems that could be fixed now (a little too soon to be sure).  Don't know if there is a link between what I've done and this file association problem...  But here's what I did:

  1 an error message for lack of file Association for an external hard drive has been corrected by the associations of fixation to the drive, folder and file from this page (see at the bottom of the box): http://www.winhelponline.com/blog/file-asso-fixes-for-windows-7/

  This problem is now fixed.
   
  2 event ID 2 errors were corrected following the advice on this page:

  http://social.technet.Microsoft.com/forums/Windows/en-us/1ad12734-3cd2-4733-936D-9c4071ecdb63/event-ID-2-error-homegorup-log-has-failed-to-start?Forum=w7itproperf

  Specifically, these instructions

  In another forum "richardvetman" has this solution. I have not checked yet, but that's what he said:

  'Hi.

  The circular kernel context logger takes frequent pictures of the system in a file of 100 MB of RAM (not on the disc). It is needed.

  To fix the error "not start", look for the next file in the %windir%\panther\ folder:

  Setup.ETL

  and rename it to

  Setup.Old

  He can stay in the \panther\ folder.

  Reboot and everything is done!

  RichardVetMan ".

  http://www.SevenForums.com/general-discussion/2189-event-viewer-errors.html#post391234

  So far, no more error Event ID 2, even if it is a little early to be sure...

  3 event ID 27, property of the Outlook calendar folder is missing, were corrected advice following Diane Poremsky pointing to this MS hotfix:

  http://support.Microsoft.com/kb/2849973

  This problem is now gone.

  Would be very happy with your suggestions on how to get rid of the annoying file association warning when the PC is turned on.

  JF

  Looks like something is running at startup, which is causing your problem. Take a look at this app and I don't know that he will jump on you.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Note, right click > run as administrator

  I hope this helps.

• Codec problem - unable to play videos

  original title: Codec problem

  IM starting to Walden University online and some videos won't play. An error message appears that says that Windows media player can not read the fule because the required codec is not installed. I tried to call the technical support of the University, but they didn't know what I was talking about. How do I know what codec I need?

  IM starting to Walden University online and some videos won't play. An error message appears that says that Windows media player can not read the fule because the required codec is not installed. I tried to call the technical support of the University, but they didn't know what I was talking about. How do I know what codec I need?

  You know quite well by asking or by downloading a local copy and these hosting or those who created the video by checking with something like gspot.
   
  Or - you could give a link to the video and someone could check.
   
  You have the standard Internet Plug-ins installed?  Adobe Flash Player?  Microsoft SilverLight?  Apple QuickTime?

• Damaged file - swatch problem?

  I'm working on a map of board game showing aerial view of a city. For various reasons, I use different shades for each corner of the roof of the building - the same model basis, but dark for opposite the sun roofs, lighter for those facing towards the Sun, etc. (Yes, I can do something like this using a single nuance and superimposing different levels of gray on top fill) (by a multiplication or Darken blend mode but IMO, CMYK blending modes doesn't look as good the RGB modes made in Gimp, it's what I use).

  That's why, when I draw a building, I put down the building "skeleton" and apply different shades to each side of the roof, then I rotate the building to its correct orientation.

  Unfortunately, even if Illustrator saves these files very well, they open not so well. I get errors like this:

  

  Where "light textured Tannish brick" (No 2) is one of my color chart.

  I used the advice on this web page (https://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file) to retrieve the file, but the problem continues to be and I can't continue to work in this way.

  It seems that when I apply a shade and then turn it in the context of the rotation of its building in position, Illustrator creates a new shade and adds it to the Swatch Group. Because I re - uses the same set of basic color chart, Illustrator keeps renaming with < name of Swatch > #, where # is 2, 3, 4, etc. Apparently it finally becomes a problem, perhaps?

  Any help or advice there? I put a lot of time in this process, and I would not give up because Illustrator can't handle a lot of nuances rotated.

  I use Illustrator 18.0, I think. This is normal - I don't like being on the cutting edge of improvements to Illustrator. However, if the problem has been resolved in one of the latest releases, it would be worth grin me and update.

  Thank you

  Tom

  Tom,

  Being a recurring/coherent file corruption problem, I think this is one for our friends at Adobe staff in the design review team.

  I just tried to draw attention to our product support Manager.

• Could not complete your request because of a TIFF file analysis problem.

  I use Photoshop 2015.1.2 Relese on a Mac El Capitan 10.11.3 version

  I have serval Tiffs which I thought were corrupt, since I can't open them in Photoshop without the error "Could not complete your request because of a TIFF file analysis problem."

  But I can open them in the preview. Any suggestions?

  We have the same problem: compressed, but it lacks the StripByteCounts area (required for TIFF).

  Some TIFF decoders can read the file, but most will not.

  Overview of Apple gets most of this file, but the top of the image looks like it may be damaged.

• Acrobat Reader DC works fine and opens a PDF file without problem - until I have a word document open as well-, then the PDF file crashes. I can't open a PDF file, a word document is also open.

  Acrobat Reader DC works fine and opens a PDF file without problem - until I have a word document open as well-, then the PDF file crashes. I can't open a PDF file, a word document is also open.

  For troubleshooting, you can disable the Protected Mode (https://helpx.adobe.com/reader/using/protected-mode-windows.html#id_94783) and see if that solves the problem. If the problem persists, please re-enable the Protected Mode to improve safety.

  Let us know how it goes.

• the construction of my portfolio on Muse site. Download my examples of banner ads that are SWF files, no problem. I need to download HTML5 banners I have done, but cannot get them on my page in Muse. Also, here the HTML5 banner ad to appear on a break, th

  Build my portfolio in Muse site. Download my examples of banner ads that are SWF files, no problem.

  I need to download HTML5 banners I have done, but cannot get them on my page in Muse.

  In addition, would be like HTML5 banner ad to appear in pause, then Viewer would click to watch it animate.

  Anyone know to solve it for it?

  Have you tried to insert via object > insert HTML?

  https://helpx.Adobe.com/Muse/topics/Embedding-HTML.html

  https://helpx.Adobe.com/Muse/using/adding-edge-animate-content.html

  Thank you

  Sanjit

• -A file association problem exist, which prevents the file you are trying to download from being associated with the correct application of the operating system using the windows 7 IE 11

  --	Is a file association problem, which prevents the file you are trying to download from being associated with the correct application of the operating system

  IN USING THE WINDOW 7 IE 11 HOW CAN I FIX IT?

  Try to download the installation offline programs:

  • Adobe Reader
  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

• Major file Corruption problem...

  Last week, I suddenly have a file corruption problem that's what I'm trying to destroy. He showed all first to the top when I converted a 16-bit file to 8-bit, but it's now the case if I add a layer and apply the high pass filter or add some details of shadow & Highlight, then the layers started almost "dissolve" and become more transparent... or they take on transparency of block type. I enclose some photos that show the sort of thing that happens...

  It's a fairly simple picture with 5 layers of distinct images. When I added a layer and applied the high pass, he corrupted the background layer to give me this...

  

  You can see that the icon in the Palace of layers shows clearly the corrupt background layer. There is also a little showing on the icon layer to Hi...

  

  Next is a much bigger (almost 2 GB) file with tons of layers that went well...

  

  .. but when the high pass layer is isolated you can discern the corruption...

  

  Shortly after taking these screenshots, the rest of the layers that everything has been corrupted and all layer mask icons were checkered with rasterized transparency. Remove the affected layers and adding them back in did not help... they would just get corrupted again. Remove the damaged layers, saving the rest of file and quit smoking did not help... to open the file again and trying to add layers back would result in still more corruption. I found some success from scratch, do one or two things, save, and then quit Photoshop. Then I would duplicate the file, reopen Photoshop and do one or two things, save again, and then quit Photoshop again... repeat 100 times! Not exactly a workflow, I can live with...

  And the really messed thing, is that this is happening with CS6 and the CC version. I'm working on a MacPro 2.8 GHz Quad-Core Intel Xeon, 24 GB 1066 MHz DDR3 ECC, card ATI Radeon HD 5770 1024 on OS X 10.8.5 MB

  Any help will be welcomed with much praise!

  BT

  We'll see if it's a problem of preferences. It is very common, yet easy to fix. Use you especially when Photoshop is upward and you know that you do not alter your installation or settings.

  Hold cmd-opt-shift and run Photoshop. You will see a dialog box 'delete settings '. Answer 'Yes' and allow Photoshop to continue loading.

  Let's see if that fix it.

• Mastering questions 5.1 (it is not a codec problem)

  Hello

  I have some major issues to master sound for my first student production in Premiere Pro CS4 5.1.

  This isn't a question of RTFM. It is also not a codec problem. My problem is that in hardware parameters Audio my audio device is listed to have output only 2.0, and only two channels is available in the Audio output mapping.

  

  At the same time I have no problem with bed sound 5.1 and 7.1 from other applications (Windows Media Player, QuickTime, VLC, various games)

  I understand that maybe that's a problem with a driver for the Realtek onboard Audio. It is also my understanding that I need to buy a new sound card that supports full 5.1 ASIO.

  Please advise on what is best for. Please check in this dialog box or the dialog box match the Audio output of the preferences panel, you have in fact 5.1 or more channels of output. I thank you very much in advance.

  Fantastic! I can't tell you the number of people who helped this little free .dll.

  ASIO is a little science, a little and a lot of luck art. This is not only a question of Adobe. Many DAW studio-level apps. have the same problems.

  At the end of the day, it's the things to work and work well, as well as get the projects at the door.

  Now, if you have any questions to other programs, using Audio ASIO, just go to their preferences and set things up for ASIO4ALL.

  I'm so happy it helped you, as it has helped me and many others.

  Good luck

  Hunt

• codec problem

  I'm doing a movie, but I get the following error:

  The file c:\users\emily\pictures\2011-04-11\100_0926.MOV cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  Codec is the abbreviation of compression and decompression of that particular video file.

  I recommend one of the K-Lite codec packages available here to download and install. The regular package should be enough, but you can opt for the full package.

  Once you have downloaded the package on your computer, you can right-click on the installation. EXE and run as administrator to avoid any problems with the installation.