File sharing without IP layer natively via Ethernet on Windows

Similar Questions

• How can I disable the file sharing without Windows Firewall is turned on? (I use Norton 360 and he doesn't have two firewalls running at the same time.)

  When I go to the "network and sharing" and try to disable file sharing, it automatically turns on the Windows Firewall. I want to be able and disable file sharing and disable the Windows Firewall (I use Norton 360 firewall). Any ideas? Thank you.

  Hello

  Check this box

  How to enable file sharing enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126388-file-sharing-turn-off.html

  If no joy collate Support Norton/Symantec and Forums

  Norton support
  http://www.Symantec.com/support/index.jsp
  http://www.Symantec.com/Norton/support/DTree.jsp?PVID

  Norton forums
  http://community.Norton.com/Norton/?category.ID=NIS

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• File sharing between two computers with DIFFERENT Versions of Windows (XP & Vista)

  I just bought a WRT54G4 Wireless-G router broadbad & am a n00bie to this any thng in network.  I like the current state of things now, all considering that both my desktop PC (Windows XP Home Edition) & my laptop wireless PC (Windows Vista Home Premium) are online (local & Internet) BUT I can't seem to get things while my desktop PC sharing files which can then be read and otherwise accessible by the laptop.

  Here's what I'm trying to...

  * Have BOTH computers access the Internet via a private network (which I already managed to do)

  * Having the Office to share files that are accessible (wireless or not) from my laptop

  Essentially, I want to be able to use the TWO HDs according to needs.

  My office is an old computer AMD Duron 1 Ghz. with 512 MB RAM & can handle a FEW small spots, but the big gun is my laptop (A 1.86 Ghz. Intel Pentium with 3 GB of RAM). Because of his speed & memory, I would like to have the laptop handle larger & more intensive tasks.

  Although my laptop has a smaller hard drive compared to my office (A 136 GB HD in the office (200 GB) compared to a 141 GB (I guess this HD is around this size, but since it came pre-installed, & I am currently leasing to buy, I don't know), I would like to be able to use if possible of the TWO HDs.)  All I need is for both computers see the two HDs & all the files on it.

  I tried implementing the sharing of files, as shown elsewhere on the Linksys site, but he lost when I rebooted both my computers, since that's what the page told me to do (I followed Windows XP as the Office has all the files that I want to share & Windows XP is the operating system of the desktop).  Should I have not done this?

  In addition, my ultimate goal is to GET RID of the big bulky monitor I connected to the back end of my desktop PC & all simply use the laptop instead, because it does not take a lot of desktop space.  Y at - it an emulator "Virtual monitor" or software of some sort that I can download (for FREE please ) that will allow me to see the jobs of all the computers on my network, just as if I

  had REAL monitors?  If so, where could I find one?

  In short, together, I have accomplished a lot lately since I bought the router & linked computers, as you can see, I still need help & I've got some learning to do.

  Any help I can get would be MOST appreciated.

  See you soon

  Pat Cook

  Denver, CO

  Make sure that the file and printer sharing is enabled...

  Also, make sure the computer are in the same workgroup...

  Default workgroup in Windows Vista has been renamed to WORKING group. In Windows XP, the default workgroup name is MSHOME...

  Also go into the computer on each computer software firewall and set it to "trust", other computers on your network.
  If your firewall or PC security program maintains a list of approved applications (also known as a "zone of confidence"), so make sure that your router is in the zone of confidence on your firewall...

• Can't access files shared from the Windows 7 machine "you don't have permission to access to...» »

  I have a windows XP Dell, who owns a record of Quickbooks on it.  I have always shared this folder between two XP machines.  I upgraded a computer to Windows 7.  The Windows 7 machine can see the XP machine, see the shared file, but gets an error that says...

  Windows cannot access \\HOLLYS-PC\Intuit

  You are not allowed to access \\HOLLYS-PC\\Intuit. Contact your network administrator to request access.

  I followed the instructions on both machines to share files AND have no RESIDENTIAL unit located on the machine 7.

  Hello

  See this link for more information on how to share files:

  http://social.answers.Microsoft.com/forums/en/w7network/thread/14c9cf97-ac52-48bc-A730-284de284d353

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  I hope this helps.

• Does not open the files shared via the command run

  We use a server in our Organization and we can connect to this server using RDP. But when we try to access shared files and folders in this server via the command run in the client by entering the IP address of the server asks it enter network password, and we enter the right username and password (I'm sure that I entered the password and user name correct to 100%) it displays 'failed to connect '. ': unknown username or bad password ". and if we took the same user name and password via RDP it will easily connect without any error. Please give us the solution for this problem.

  Kind regards

  Vijay Kumar C.M.

  Left thread (files, folders, and online storage) for (web and networks).

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb250589.aspx

  Thank you.

• File sharing Mac for iphone via Airdrop does not

  File sharing Mac for iphone via Airdrop does not. Please suggest me.
  In the finder of mac and iPhone, I clicked on "Let me o find out for everybody". IPhone is still not release shows.
  IPhone is the model of 5 s (10 iOS) and mac MAc mini end of 2014 (OS X EL Capitan - 10.11.4).)

  Cross the writeup here.  Make sure that both devices have Wi - Fi and Bluetooth connection 'On '.

  Use AirDrop to send the contents of your Mac - Apple Support

• network discovery, file sharing and public folder sharing won't turn on if the ethernet cable is removed and plugged

  Public folder of Windows Vista sharing problem.

  Whenever my pc is disconnected from the internet sharing files turns back on. Options: network discovery, file sharing and public folder sharing will turn on if the ethernet cable is removed and plugged. How can I prevent this from happening.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  It will be useful.

• Made a bridge network distort your IP address for file sharing via a WIFI network?

  Dear Microsoft Answers,

  I have a network bridge set up the connection of two network cards wireless (an external and one internal), one of the witches providing internet service via the WIFI of my neighbours, the other to distribute the signal through MY House, some between my iPhone and my PC wireless file sharing works all by sharing connections but not when jumpered. I need bridge for good internet services connections. Please , can someone help me with this, Ive been having SO many network problems lately, and I hope for relief. Thank you!

  Hi Rio12345,

  We recommend you to check if the Windows Firewall or any other firewall installed on your computer allows the devices to communicate on the bridge.
  See Allow a program to communicate through Windows Firewall

  For further assistance, you can get in touch with iPhone support team

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• Is Linux - possible to build a shared library that calls other libraries shared without having to make a static link to them?

  Hello

  Operating system = Linux (Ubuntu 14.04 LTS 32-bit)

  I am building a shared library *. so.  This *.so should be used by LabVIEW.  This *.so is calling other functions in shared libraries.  In my case, the other library share is libxml2 and libz.  The only way I could compile my shared library and operate was a static link from libxml2.a and libz.a.  Is there a way to make a dynamic link?

  Here's the makefile file that I use.  The goal of 'TestValidateSchema' compiles the shared without the static link library and this shared library is called by an application to test 'c' and it works.  Now, to make it work in LabVIEW, I need to make a static link, as you can see in the target ' install: «otherwise the function "call library node" throws me a symbol unresolve...»»

  This is the only way to do it and if yes why?

  Thank you

  --------------------------------

  CC = gcc

  all: TestValidateSchema

  TestValidateSchema: testValidateSchema.c
  $(CC) o Release/validateschema.o - c - wall - Werror - fpic Src / validateschema.c - I. / Include-I/usr/include/libxml2
  $(CC) - shared-o./Release/libvalidateschema.so./Release/validateschema.o
  $(CC) - wall o ./release/testvalidateschema testValidateSchema.c./Release/validateschema.o-lxml2

  clean:
  $(RM) $(OBJS)./Release/testvalidateschema./Release/libvalidateschema.so./Release/validateschema.o /usr/include/validateschema.h /usr/lib/libvalidateschema.so

  install:
  $(CC) o Release/validateschema.o - c - wall - Werror - fpic Src / validateschema.c - I. / Include-I/usr/include/libxml2
  $(CC) - shared-o./Release/libvalidateschema.so./Release/validateschema.o Src/libxml2.a Src/libz.a

  --------------------------------------

  In addition to what said Daniel on the specification of an external shared library in the liaison stage of your version of the shared library, together with the - shared option, there is still one thing to consider:

  Your library of hello.so then contains references to functions in external shared libraries libxml.so and zlib.so. When LabVIEW calls dlopen ("/ path/dir/hello.so",...) it basically hands of any control in the linker Linux running, ld.so that takes care of the rest. LD.so then try to load the shared library, recognizing that there are external references and try to solve.

  First he tries to match the missing external references to any symbols that have been previously loaded into the current process already. If this is not successful for a particular system, it queries the ldcache for a library and a symbol. ldcache is updated with the ldconfig program. When you add a new shared library on the system that you want the linker ld.so runtime in order to find, run ldconfig.

  NOTE: Running ldconfig is not normally necessary to shared libraries that access you directly via the node call library, as you specify here the full access to your custom library shared already, so path ld.so will fail immediately if it is not the library specified in the given absolute position and will not attempt to query ldcache at all.

  If you are installing packages through your package manager platform update ldcache for all publicly accessible libraries shared in these packages is usually done automatically for you as part of the package installation script. If however you manually install the libraries you need to run ldconfig yourself. In your case, you could add the libxml.so and/usr/lib zlib.so and simply run ldconfig from the command-line as it default search/lib and/usr/lib for libraries shared and rebuilt the ldcache from that. If you add your new libraries in a different directory on your computer you need to run ldconfig with - n option, saying what directory the new shared libraries have been installed.

• Windows XP file sharing failures

  I work for a financial company and we use our non-stop server.  Our server is just a XP computer a sharing folder.  Since yesterday, the server does not leave ANY computer access.  All sharing and security settings are defined very well, as they always were.  Any ideas?

  Hello

  I doubt that anyone can have a clear idea without being particularly familiar with your system/network.

  It can be one or more of the many configurations/parameters that went 'haywire '.

  Redo the sharing.

  --------------------

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -----------------------

  P.S. assuming that it is a solid, a financial company, it might be time to hire a COMPUTER consultant and using astrong network safe ,secure real solid server like Windows SBS.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Connecting 2 HP printers via Ethernet?

  Hi, new to the forum. Noticed the badge of 'Day of the Expert' on the HP site and thought it would be a good place to ask. Trying to give as much detail as possible. My apologies in advance if the message appears long

  I wonder if someone can provide a walkthrough on how to connect 2 HP printers to a desktop HP via Ethernet with a router/modem configuration installed. #1 printer is a Deskjet 6988; #2 printer is Photosmart c309a; PC is a p6623w of flag recently bought at Wal-Mart and upgraded to Windows 7 Home Premium to W7 Ultimate. I think it's one of the most recent "Slimline" computers with a minimum of available ports and for problems of space (the entire installation is in a bedroom, with most devices and devices on a desk), I can't really plug a USB hub with several sons (and nowhere to put the hub) and connect the stuff. In addition, there are other computers in the House: two laptops, Pavilion dm1z and Pavilion dv6 - 3227cl, respectively and also with W7 (dm1z = W7 professional, dv6 = Home Premium), on which I would use shared printing (but "home group" met with mixed results). DSL modem is a 6100 Westell Verizon's connected to a Linksys router #WRT320N. I consider myself as moderately / intermediate level "techies" and can understand a little how to perform maintenance / installation routine I receive once the steps in a detail 1-2-3 format (preferably with photos and other visuals!) Some specific questions I have, as well as more details on the configuration of the computer, are listed below. Thanks in advance to anyone who can help!

  Issues related to the:

  
  

  (1) physical installation is kind of a "Frankenwerk" configuration, with the wires used devices is more internal (but apparently the standard regarding the adapters Ethernet/USB/ca / go). Am a little confused, however, of what is required when making the connection: have 1 yellow cable plugged into the Ethernet port on the Linksys router and the Ethernet port on the modem. There is also a wire Blue connecting port #1 the Linksys router to the Ethernet port on the desktop. Will I need to buy additional cables to connect the 6988 and c309a, and ultimately, where should I connect all of them?

  (2) seems every time I want to try an install (and allegedly to succeed), I later get error messages in the Device Manager MS on a 'WPD file system Volume driver", specifically"this device cannot start (Code 10)." What is the WPD driver and how is it related to the printer (not exactly which), and how to avoid these mistakes in the future?

  More details:

  
  

  WR320N of Linksys (Cisco) (link)

  PC: computer laptop dv6 - 3227cl (link) / Pavilion dm1z laptop (link) / Pavilion p6623w Desktop (link)

  Printers: Photosmart c309a (link) / Deskjet 6988 (link)

  Diagram of the current facility (link) 1650 x 1275 (for display)

  Pavilion dm1z-2100: 5 GB of RAM; 500 GB HD
  Audio: IDT HD Audio
  Wireless: Broadcom BCM4315; Wired: Atheros AR8121
  Graphics card: AMD / ATI Mobility Radeon HD 4200
  Storage: AMD 780G Chipset; AMD SB700 Southbridge

  Yes that's correct... Plug-in - in any random port 2 to 4 is not serious it should be standard.

• WRT610N/RT31P2 Internet OK, no file sharing / print

  I installed a WRT610N router this weekend.  The 610N takes care of my local positions Microsoft network and connects via the Ethernet port to a RT31P2, where my phone is connected.  The RT31P2 is connected to a cable modem.

  After a pass to a Linksys tech, Internet access for all 4 computers connected to the WRT610N works.  VoIP phone service works.  The only thing that doesn't work is not is the file sharing and printers on the network Windows.

  All systems running versions of Norton Internet Security (as they were when he is on the cable network) and the Windows Firewall is off.  The four systems show in the table of DHCP reservations, but none of them can see themselves as part of the working group.

  Any ideas what may cause this?

  Problem solved.  New versions of Norton require that each individual computer be labelled with full trust from the view of the network card rather than enter a range of IP addresses of trusted network.

• "the service does not exsist as an installed service-" File Sharing/networking

  I am running Vista x 64 Home Premium and have recently had problems with my file sharing-printer sharing network discovery-Media Sharing. For the last 8 months I run my Xbox Live through my computer laptop Ethernet to log-on Xbox Live connection and had no problem connecting. Recently I went to connect and was not able to connect my 360 * to the internet via my Ethernet connection. I checked my network & File Sharing settings and noticed that ALL my "Sharing" Options have been disabled. When I tried to turn it on I get "service does not exsist as an installed service. The only thing that works is the password protected sharing. I read almost all the options resets and sfc.exe and led to no result. When I run the sfc.exe program it gives me the final results of some files have been found to be corrupt, but have been unable to solve the problem. I can't locate my Vista recovery disc after moving so I won't be able to reinstall to factory set up. With regard to the system of recovery for some reason that I can't go until this situation occurred because of some settings which apparently changed.

  Hello rjaymz83,

  I suggest a system restore to before the issue started occurring:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  The issue occur also in Mode safe?
  You have carried out comprehensive analyses of viruses and malware on your computer lately?
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials