Connecting 2 HP printers via Ethernet?

Similar Questions

• Unable to connect to the internet via ethernet.

  Unable to connect to the internet via ethernet.

  You have published a statement... is not an issue. You have a question?

  Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

• Why can't connect me to Internet Via Ethernet?

  Hello

  I help set up the iMac to a friend. No problem problem connecting to Internet through WiFi but can not get the connection via Ethernet. Cables checked and ethernet and all are in working condition. Took some screen shots but I'm not good at all with this stuff. Can someone explain where I'm wrong. Of course, it's simple for a person - but not for me!

  That's what I mean when I open the network tab:

  

  I'm not with the Mac today so instructions to take with me would be very appreciated.

  Kind regards.

  Are plug you the ethernet cable directly to one of the ports on the router to the ethernet port of the iMac, rather than through network extensions? If so, and it is not working, you have another ethernet cable, you can try?

  If the cable connections are good and it still does not, you can try a reset SMC and NVRAM (PRAM) and then test again:

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

• I could connect two laptops together via Ethernet cable

  Hello
  I'm playing a game via LAN but my router guard block that connect my comrades requests so I thought that we could create a network between two computers using an Ethernet cable and removing the router completely.
  Both of our laptops are manufactured by Toshiba and both the same type of model.
  Please tell me if this is possible and if it is what would be the best way to do it.
  Thank you, Jason

  You can, but need to run an ethernet cable crossover (null modem).  The MST it will not work without a router in the mix

• My new Inspiron one 2020 does not connect to the internet via ethernet.

  I have connected my a 2020 new victory 8 to our office via a network cable and the following occurs: Broadband connects to the router, but not internet access. I can reach our router and see the router configuration and status screens, but not the internet.  The rest of our office has perfect internet access. I tried two calls to support, and abroad, people insist that they go through their material problems even if the network adapter works obviously.  I suggested that it was probably a problem of windows security, and they said to reinstall windows.  Very frustrating.  Any help out there?

  I finally got internet connection ignoring suggestions from tech support and following my instinct that he was related to security.  First, I removed the McCaffy and turned off the windows firewall.  Then I crossed the ip configuration for the 6th time and ended up dhcp and my dns settings in tcp/ip to work and I had internet.  Firewall turned on him again and consider using Windows Defender.  I complete installation tomorrow after that updates Windows Update are downloaded while I'm resting.

• Unable to connect to the internet via ethernet cable

  Hello. I'm using acer aspire v5 - 431 and my Internet worked perfectly fine this.morning. now, it detects cable the.ethernet. IM using windows 8 and my laptop is only 9 months old. WiFi works perfectly.
  Ive restarted the computer laptop, disconnected, did the flushdns doesn't seem to work at.all. pls help! I'm desperate!

  Found the problem... it seems that it is a problem with my cable LAN/VGA port combo...
  Have to buy a new one! so, for now ill stick with wifi! (T_T)

• After the installation of Windows XP Edition family, it won't connect to the internet via Ethernet or wireless. I am also unable to activate Windows.

  just installed windows xp home edition on my laptop but it does not connect to the internet (both with a cable and wireless) and it also won't let me activate windows (cant conect to the Server Setup)

  original title: windows xp is a pain

  What is the manufacturer and model of your laptop?

  Visit their web page (the manufacturer) and find their drivers and help section and get the drivers for your model laptop for Windows XP 32-bit.

  You, of course, this done from another machine and using some external media to get it back to the laptop.  You can get * just * wired or wireless network drivers if you wish - you can then use the Internet on the laptop again to get the rest.

• My computer is connected to a router via ethernet but my wifi stops when the computer goes to sleep. How can I stop this?

  I just installed the router today.  Wifi a works fine until the computer goes to sleep, then my wifi for my Ipad, nook etc off.  This should not be the case.  Why would he do that?

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to Wi - Fi?

  Method:

  Follow these steps and check if that helps.

  (a) click Start, type Device Manager in the search box.

  (b) click on Device Manager , according to the results.

  (c) expand the wireless adapter, right click on the drivers listed.

  (d) click on Properties, click on the power management tab.

  (e) uncheck the option allows the computer to turn off this device to save power.

  (f) click apply, click OK.

  Let us know if it helps!

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• problem running example project USRP FPGA connected via Ethernet

  Hello

  I am trying to run the example project of USRP FPGA on a USRP-2940R connected to a PC windows using Ethernet. I have not made any changes to the FPGA VI or screw host and I'm tryign to run the host Rx in Streaming, VI. I get the error-63180 function Open Bitfile dynamic reference (called from the VI open device), with a possible reason for "the specified resource name is a reserved word or an invalid alias. Alias of RIO can only contain alphanumeric characters, '-' and '_ '. I specified an IP (192.168.10.2) for entry of address of device to function. I guess the address of the device is the problem. This who should I be specifying the address of device in this case. Any help would be greatly appreciated.

  Jerry

  jerrysydir wrote:

  The restriction you mentioned is specific to the USRP platform? The website NOR talk using Labview FPGA with a RIO Ethernet expansion chassis.  (http://www.ni.com/tutorial/11703/en/).

  LabVIEW FPGA on Ethernet is only available through LabVIEW RT. Behind the scenes of the target is still connected to the well RT via PCIe controller and then the RT controller is connected to the host via Ethernet. There are also some USB LabVIEW FPGA targets (http://www.ni.com/white-paper/14821/en/).

  For the RIO USRP, MXIe is currently the only bus taken in charge for LabVIEW FPGA.

• Satellite L735-10V - unable to connect to the internet using ethernet

  I have problems connecting to the network via ethernet.
  connect the ethernet cable and the laptop connects to the net, but after a few seconds it disconnects.
  I don't know what the problem is.

  I tried to disable TCP/IPv6 and it doesn't work.
  Please can someone help me here.

  It's just killed me.

  It is not easy to say what may be the problem.
  Have you noticed the same thing using WIFI?

• Share Internet via ethernet port

  I just bought some tinge of Philips bulbs and a bridge. The bridge must be connected to a router via ethernet. Well, I just use my phone for Internet hotspot, and my phone is not obviously have an etherenet port. I want to be able to plug into the ethernet port on my computer and connect my computer in WiFi and send it to the ethernet port. I tried to go to the WiFi properties and share it to the Ether, (http://windows.microsoft.com/en-us/windows/using-internet-connection-sharing) the Internet light lights up on the hue, but tint application still can't find it and scan ip shows that it is not actually connected. Am I doing this wrong? Any other way to do this?

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itpronetworking

  Hope this information is useful.

• LaserJet 4050 TN: Try to connect old Laserjet 4050TN via an Ethernet cable

  Hi, just inherited an old 4050 TN printer which I connected directly to my router using an RJ45 ethernet cable.

  My PC is connected via ethernet also cable to my router.  I can not get my PC or my network to recognize the printer.

  I tried to download the HP Universal HP.com and printing software that I hope, are the right drivers, but so far nothing that I allows me to connect the printer.

  I tried to add the printer to my homegroup, but Windows 10 always tells me that I can't create a homegroup on my PC, I don't know why it didn't, but I recently had to re - install windows 10 and my working group worked well previously.

  If anyone can point me in the direction of the correct drivers and installation software (do not have the original disk I'm afraid), that would be fantastic.

  Thank you

  My usual procedure would be to go through the printer menus and set IP DHCP configuration method.

  Then I would have to power cycle the printer with it plugged into the router and him give 2 minutes after getting a ready state and print configuration pages.

  On the configuration pages you will find the IP address that the router gave the printer, put this address in the location bar of a browser.

  Now you will look at the web server integrated in the jetdirect card and you can change it for an IP address manually so it will be the same after each power Cycle.

  I usually take the IP address assigned by the router and add about 22, in other words if it receives your printer an address ending the remplacer.24 par.4.

  You add the printer through the devices window and printers.

  Now, you can set up your device and that you add it to your selection of PC add local device, then you want to create a new TCP IP port.

  When you create the new port, you use the IP address that you gave your printer.

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.