file:\Windows\system32\winload error code. EFI: 0 xC0000001

Similar Questions

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• The required file is missing or contains errors. file: \Windows\system32\winload.efi.

  So, today, for Christmas, I got a laptop Asus R503U series. I played a little bit about it for a while (all in the same day) and towards the end, a pop window up told me that windows live was insensitive and I had the possibility to close or wait until after I hit wait three or four times I finnaly hurry then close my phone froze so I restarted and when it shows is I was instantly to a screen that says : Recovery of that your PC needs to be repaired. The application or the operating system could not be located because a required file is missing or contains errors. file: \Windows\system32\winload.efi. you will need to use tolls to recovery on your installation media. If you do not have any installation media to contact your system administrator or the computer manufacturer. I bought this laptop from a Pawn shop with just the phone and any other case it came pre installed with windows 8, it's even a sticker on the bottom. I really need help! The cheapest way to please and thanks a lot!

  Thank you so much you pretty much confirmed what I thought it was true. I have a windows desktop computer which is able to create a recovery Flash disk, but the size is 16 GB, disappointment, enough with what you just explained?

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• Laptop factory settings reset fails with an error "0 xC0000001 file:\windows\system32\winload.efi missing.

  Original title: computer Reset laptop to factory settings

  I am getting error 0 xC0000001 missing file:\windows\system32\winload.efi and I have not a disk how can I fix this help please me

  http://www.Google.com.au/search?q=Winload.EFI+missing+0XC0000001&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & gws_rd = cr & ei = 05gJUrq0Lsj6kAWmuYDgDg

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• OxcOOOOOOf error - file: \Windows\system32\winload.exe status: OxcOOOOOOf

  I get a message from Windows Boot Manager as follows: could not start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. you insert the Windows installation disc, and then restart your computer. 2. choose your language settings, and then click "next". 3. click on "Repair your computer."  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.  File: \Windows\system32\winload.exe status: OxcOOOOOOf Info: the selected entry could not be loaded because the application is missing or damaged.

  I have the drive, it won't start him.  I got the diagnostic tool memory to run.

  What should I do?

  See the Divine Logix post on this thread if it helps:

  Winload.exe is missing or damaged (no it isn't!)
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c99dc573-6842-4E28-8ec0-a63c61495308/

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• Vista, it lacks the file:\windows\system32\winload.exe.status:0xc000000f,D partition was installed at the factory, backup

  I deleted the contents of partition D on my friends family vista premium, now it will not boot from the disk of the plant, he said that the file:\Windows\system32\winLoad.exe is missing with status 0xc000000f were if I can get this file or is there anything I can do to get the content from the back of the drive D : or just that he can start up without this partition D

  Hello

  the D: Recovery partiton was photographed by the manufacturer during production

  Once deleted it

  you are not supposed to ever altering this partiton

  as you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• lack file \windows\system32\winload.exe

  try to find a missing file, so I can start my computer, the file is \windows\system32\winload.exe

  original title: I need to know about a lack of file how do I start my PC it is \windows\system32\winload.exe how to do this when my computer starts

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion 13 X 360 PC: File:\Windows\system32\winload.efi 0xc0000225 error Code

  Product number: K1K07EA #ABU

  Serial number: [personal information]

  How can I get a picture of discovery on a USB port when I can't access my laptop to get the picture?

  Download Recovery Manager on an old laptop?

  All tests do not sure what happened, I would like to know if any other information is needed.

  Thanks in advance,

  Rob

  Hello

  You are welcome.

  This happens because your machine comes with 8.1, so will have no specific driver for 8

  When you are on the page displays "no software or drivers are available for this product with the selected operating system." Please make a different selection ", you see an option of editing right - if you do, click this button and select Windows 8.1 because the OS - most of the drivers should work for 8"  As long as you install the LAN or WLAN driver, just go through the updates to Win 8 until the 8.1 update is available, apply it and then install the rest drivers.

  Kind regards

  DP - K

• Vista does not load says lack file \windows\system32\winload.exe

  Cannot load disk file mussing vista... told me to contact microsoft for a download of my missimg file.     HOW?

  Hello

  1. Once you get the error message?

  2 did you last modified the software on the computer recently?

  Method 1:

  Step 1:

  I suggest try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to get into safe mode, then I suggest you perform a system restore to the date when the computer was working fine and check.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If you are not able to start the computer in safe mode, and then follow the steps mentioned below:

  Method 2:

  I suggest you to go through the steps one at a time and check.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  If you are still not able to solve the problem, then I suggest you to follow the steps mentioned in the link and check.

  Method 3:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

• Problem refreshing - state that there was a lack of file i.e. windows/system32/winload.efi with a 0xc 0000001 error code.

  Original title; Refresh problem

  Tried to update and went through the procedure advised. However, the message come indicating the problem with the computer. He went on to clarify that there is a missing file, i.e. windows/system32/winload.efi with a 0xc 0000001 error code. He said I would need to have access to the USB or disc, but I have no then recommends talking manufacturer. However, are there any other ideas to rectify this.

  Hello

  We need more information to help you, please answer the following question.

  What is the brand and model of the computer?

  Error code: 0 xC0000001 indicates that there could be some problems with the boot device or startup files are corrupt. Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions. Choose this path requires you to save all the data first. The OEM must be able to provide a recovery CD to you at time of purchase.

  If you do not have a disk to install/repair of Windows 8/8.1, then I suggest you first create a Windows 8/8.1 installation media. Check out these links:

  Create a recovery USB disk.

  http://Windows.Microsoft.com/en-CA/Windows-8/create-USB-recovery-drive

  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  The Windows upgrade with only a product key.

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  Run the update using the repair disc.

  How to refresh, reset or restore your PC.

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Note: Apps that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  You can also view the following link.

  Windows 8.1 gel and Refresh Failed - error 0 xC0000001 is.

  http://social.technet.Microsoft.com/forums/Windows/en-us/c39cf1e1-fed8-49BD-bc6c-8690836f371f/Windows-81-freezing-and-refresh-failed-winloadefi-error-0xc0000001?Forum=w8itprogeneral

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• help \Windows\system32\winload.exe file is missing or damaged

  Windows does not start, the computer will not load or meet recovery disk, HOW or WHAT DO I NEED TO DO TO FIX PROBLEM

  \Windows\system32\winload.exe SAY FILE IS MISSING OR DAMAGED.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

• Windows Boot Manager error file:\windows\system32\drivers\ksecdd.sys

  Please can you help with the problem mentioned above, on 15/08/2010, my mother downloaded vista was last updated. While playing freecell or solitaire yesterday (16/08/2010) its system crashed, I did a check of memory and there are no problems reported, so did a restart and it crashed again, he suggested a Startup Repair I did, but Vista could not solve the problem. The Windows Boot Manager screen is the next...

  File:\windows\system32\drivers\ksecdd.sys

  Status: 0xc0000221

  Pease help you because she really expects me to solve this problem during the night...

  OK I'm studying for my M.C.D.S.T for the moment, but it takes time to go through it all.

  Hello

  You do not have CD on C: - to replace a disc it just type C: and press enter
  CD, it's how you maneuver around a player, once you're on it. Saute in X: you would
  It just type X: and press ENTER.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can't access a secure site, error message "file windows\system32\MSHTML.hlp must be reinstalled."

  Original title: How can I reinstall the Windows\system32\mshtml.hlp

  I was download wallpaper on a monthly basis on a protected site since I my Dell laptop in oct 2011.  Now all of a sudden my computer informs me that access is denied.  When I click ok it says this file windows\system32\MSHTML.hlp must be reinstalled.  How can I do this?

  Hello

  1. facing this problem with this particular Web site?
  2 has there been any changes made on the computer before the show?
  3. which web browser you are using?

  If you use Internet Explorer, you can try the steps and check if it helps.

  Method 1:
  Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem is still not resolved I suggest you try the procedure described in the article, and check if that helps.

  You cannot view a secure in Internet Explorer 8 Web site
  http://support.Microsoft.com/kb/968089

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  I hope this information is useful!