Filtering with Butterworth

Similar Questions

• I have a power shot sx HS 40 & need information about the use of filters with this camera? Thank you ~.

  I have a power shot sx 40 & would like information on the use of filters with this device?

  Thank you ~.

  Hi Rainlily,

  You will need the # model Canon adapter filter f-DC67A to use filters on this camera, which costs about $25.00. Bower makes one for about $9.00 available in B & H and Bower products work well with the Canon. This adapter uses 67 mm filters. If you have not yet all filters, I would recommend Hoya or Tiffen filters as they are of high quality at reasonable prices. Do not get the expensive filters because in general they can cause color casts that may be difficult to view the process on. Have fun!

  Steve M.

• What should I do to be able to use the Kodak filters with PSE V13?

  With PSE Version 10 (and PSE Versions older than V10), I have to be able to use the Kodak filters (e.g. the Kodak 'Digital Roc Professional V2.1.0,' the KODAK "Digital GEM Professional V2.1.0",...), I had to (one time) the following when you run PES Editor:

  • Preferences-> Plug-Ins
  • Check the box "Plug-in additional files" and then "select" files C\Program (X 86) \Kodak folder that contains the files with the Kodak flters
    
    

  Once I did that (after stopping and restarting of the PES editor), I could use the KODAK filters with full Editor from PSE via the Menu-> filters.

  With PSE V13, it does not. In the V13 PES Editor, Menu-> filters don't show me any KODAK filter.

  Because the V13 PES editor not showing me filters KODAK via the Menu-> filters: I tried the following: I copied the folder that contains the KODAK filters in the V13 PES editor plug-in folder. It worked too much

  I'd appreciate your help / feedback, because I need KODAK filters for retouching of tousands of scanned old slides (among others for the removal of color in all cases casts where using the PES editor alone is not enough to eliminate the strong color casts in old slides)

  Thanks in advance

  You use windows? Remember that PSE 13 is 64-bit, unless you have a 32-bit system (indicating the path of file in your post is not the case) and plugins should be as well. Many existing plugins will not work unless there is a updated version. If these are the image enhancement plug-ins, note the tecniques:

  V

  2.1: Compatible with WINDOWS 7, XP and Vista for ADOBE PHOTOSHOP CS5/CS6 (32-bit ONLY) and CS5 MAC/INTEL (32-bit ONLY).

• MAC filtering with guest network

  Hello, I have E4200v2 of Cisco, and after someone hacked password of my router, I was forced to activate a white list of MAC filtering. Problem is that I also like to activate a network of comments so my small business clients could still connect to the wifi, without acceding to out to home PC (and drink our bandwidth).

  Is this possible? Thank you.

  1. make sure that disable WPS.

  2 change the router password on the Administration page to guarantee something.

  3 make sure to disable remote management.

  4. set WPA2 Personal with a new strong password.

  5 disable the feedback network.

  That will protect your network. Piracy is not possible unless someone passes the WPA2 password or have access to the router and ethernet ports.

  The MAC filter won't help you. MAC addresses are transferred, are easily picked up and not cloned.

  If you want to activate the guest network you must accept the fact that other computers connect to your guest network and try to access the internet from there. They manage unless they know the password, but still, they can connect to the guest network because it is not protected. Only access from the network invited to the internet is protected.

  He must also accept the fact that you can "drink your bandwidth. If you do not like who don't offer guest access.

• Upper and lower filters with Windows 7 (32 bit).

  My Medion compute'rs DVD/CD player continues to try to start when not used. (flashing on it and noise coming from it, but is not).

  Medion support sent me a fix on how to a install and re install upper and lower filters.

  I typed in REGEDIT and followed their instructions until I went into the registry editor and click 4D36E965-E325-11CE-BFC1-08002BE10318 to select this key, but I don't see the upper and lower filters listed, to remove via the keyboard in the right pane.

  They are listed under a different name. ??

  Thanks a lot guys, I'm a beginner and never went in the hidden depths of Windows before.

  
  

  emember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot select on FireSight URL filtering with license activated

  Hi community

  I have a FireSight 6.0 VM with 4 modules of firepower enabled from four 5506-X ASA devices.

  They are all updated to 6.0 the power of fire and FireSight, I have an activated license:

  

  Under management of devices for fire power I can't even select URL filtering:

  

  What should do?

  The permanent control (CTRL) license free of charge is a sine qua non for all licenses of the term-based subscription. The PAK, it should have been included with the ASA.

  If this is not your partner (or TAC) can call the sales order and you can then redeem it for a license.

• reuse of filters with different values

  We have a usage scenario where the same filters will have to be applied several times with different values. Looking the javadocs, it seems like there is no way to change the values of pre-packaged filters (EqualsFilter, GreaterFilter etc.). Is that correct or is there a way to do it? I see that if we use CohQL, we can use bind variables to do this. However, the use cases we should rather just more complex extractors ReflectionFilters.
  
  In addition, there no performance impact by using CohQL against java constructs directly?
  
  Thank you
  Manju.

  Hi Manju,

  While it is true that you cannot change values in the built in filters, even if you could it wouldn't make you save a lot on the construction of a new filter every time. I guess that if you build a very large number of filters, then you're going to create more garbage, but that shouldn't be a problem either. Some of the more specialized filters also contain State so that you do not want to resuse them.

  The main performance issue I know with CohQL which is only creates extractors of reflection so won't enjoy all serialized POF values you have. If you have indexed each value you want to query on using the same extractors relflection then it would help, but again, this means that everything you deserialization of the values for the query or insert to update the index.

  Kind regards
  JK

• ITS filter - adding several filters with the same custom attribute

  Hello
  
  I added the attributes of custom search and am able to add a filter to the doOracleSearch method.
  
  filter [0] = new filter (New Integer (100), 'NUMBER', 'equal', 10020);
  
  Now I have to add another filter for the same attribute of research with or condition, how can I do this...
  
  I tried the following...
  
  filter [0] = new filter (New Integer (100), 'NUMBER', 'equal', 10020);
  filter [1] = new filter (New Integer (100), 'NUMBER', 'equal', 10049);
  
  But how do I specify it's or and the code above does not work.
  
  Thank you.
  Vermorel.

  Here is an example of this using 11 g. Note that you need to connect programmatically if the data is secure.

  Create the search service and to define the URL of SOAP
  SearchService OracleSearchService = new OracleSearchService();
  searchService.setSoapURL ("http://myserver:7777/recherche/requete/oraclesearch"); ")

  Download the data to the research group
  DataGroup dataGroup = new DataGroup();
  dataGroup.setGroupName ("MyGroup");
  DataGroup dataGroups [] = new DataGroup [1];
  dataGroups [0] = dataGroup;

  Get a list of all the attributes to fetch
  Attribute [] attributesAll = searchService.getAllAttributes("en");
  ArrayList attributeIds = new ArrayList ();
  for (attribute a: attributesAll)
  {
  attributeIds.add (a.getId ());
  }
  Integer [] attributeIdArrayAll = Integer [attributeIds.size (new)];
  attributeIdArrayAll = attributeIds.toArray (attributeIdArrayAll);

  Create filters (BE sure THAT THE FILTER ID IS CORRECT - I do not pretend you code it but rather browse the list of all of the above attributes and get ID like that)
  Filter [] myFilters is new filter [2];.
  myFilters [0] = new filter (124, "Number", "EQUAL", "129224");
  myFilters [1] = new filter (124, "Number", "EQUAL", "123730");

  Request (be SURE to USE ' or ' as the operator between the filters)
  Result OracleSearchResult = searchService.doOracleSearch ("", 0, 50, false, false, dataGroups, "fr", null, true, 'or', myFilters, attributeIdArrayAll);

  Get number
  int hits = result.getEstimatedHitCount () .intValue ();

  Print results
  ResultElement [] resElements = result.getResultElements ();
  for (int i = 0; i)< reselements.length;="">
  {
  Download the document
  ResultElement doc = resElements;
  }

  I hope this helps!

• Turning off the filters with keyframes

  Hi, I'm relatively new to After Effects. I have a calendar with images and I applied the effect Bad TV2 - old special effects. After 2 seconds, I want to fade the effect and have the images to return to normal. But because the effect of bad TV2 is composed of 5 filters, is there an easier way of doing it rather than set all the parameters in each of the filters? I tried to reproduce the images and the effect by applying the top layer, then keyframing the opacity of the top layer, but it dilutes the effect of TV2 bad effect. Is there a good way to do this? Any help would be greatly appreciated. Thank you

  The easiest is to use an adjustment layer. Apply effects and keyframe then the opacity of the adjustment layer to fade effects.

  Steve

• How do I e-mail filters with names of Contacts... ??

  Hello

  I need to filter the messages of the particular group of people with the name of their contact that I added, because everyone is in the same domain (@abc.com).

  For EX:

  I kept the names of Contact as

  Dev Team - John
  Dev Team - Anne
  Dev Team - Kim

  Support - Aoron
  Support - Harry

  I need to filter all messages with the name of the contact that I kept also as contains with (Dev, supported with different folders).

  How can I make it possible.

  Kind regards
  Siva.

  You will need to maintain a separate address book for each group.

  Then you can do things like East in my Mozilla address book.

• Select filtering with Group of results do nto work with aliases

  I'm trying to filter the results to obtain the result with number greater than one:

  select DEPARTMENT_ID,job_id, count(*) as cnt
  from employees group by DEPARTMENT_ID,JOB_ID having cnt > 1;
  

  Oracle returns the identifier not valid error for NTC. When I use this:

  select DEPARTMENT_ID,job_id, count(*)
  from employees  group by DEPARTMENT_ID,JOB_ID having count(*) > 1;
  

  Select the works. What is the reason?

  Because it is not allowed.

  If you are looking for "oracle in the having clause column alias" you would find that said. Several times.

  Such as the use of alias to columns in clause error

• Filtering with the maximum of a date

  Hello

  I have this request

  SELECT
    PM.PATIENT_FILE_NO,
    PE.EPISODE_NO,
    
   PATIENT_NAME_2_P
   MR.VISIT_DATE
  FROM
    RC_PATIENTS PM,
    RC_PATIENT_EPISODES PE,
    AD_PATIENT_ADMISSIONS PA ,
    MR_PATIENT_VISITS MR
  WHERE
    PM.PATIENT_FILE_NO   =PE.PATIENT_FILE_NO
  AND PE.ADMISSION_NO    =PA.ADMISSION_NO
  AND PM.PATIENT_FILE_NO =MR.PATIENT_FILE_NO
  AND PE.STATUS         != 'C'
  

  the 'mr.visit_date' column got the date of the patient's visit, because

  the same patient may go to the hospital more than once,

  I want each patient with his last visit,

  How to do?

  Thank you

  • SELECT
  • H. PATIENT_FILE_NO,
  • PE. EPISODE_NO,
  • PATIENT_NAME_2_P
  • MR. VISIT_DATE
  • Of
  • RC_PATIENTS H,
  • RC_PATIENT_EPISODES PE,
  • PA AD_PATIENT_ADMISSIONS,
  • MR. MR_PATIENT_VISITS
  • WHERE
  • H. PATIENT_FILE_NO IS PE. PATIENT_FILE_NO
  • AND PE. ADMISSION_NO = PA. ADMISSION_NO
  • AND H. PATIENT_FILE_NO = MR. PATIENT_FILE_NO
  • AND PE. STATUS! = « C »
  • and mr.visit_date = (select max (visit_date) of MR_PATIENT_VISITS)

  I think it should be

  and mr.visit_date = (select max (visit_date) of mr_patient_visits

  where mr.patient_file_no = pm.patient_file_no

• LR5.6 I have at my disposal less adjustments when using radial and degraded filters with my raw Nikon (D700) files I do when editing Canon (5DMKiii).

  This is a screen CAP to illustrate.  These are all the settings for Canon on the nikon left, right.  Both with same LR (5.6).  Please advise!  I really want to be able to change the color temp!

  

  Those on the right have been published with an older version of the process. Update the version of process for 2012. You can make a right-click on the lightning just below the histogram.

• Display filters with a custom view 'No Results'

  If I do not create a "No. Results" view, and no data is returned, I get the usual message "the specified criteria result no data. This is often caused by the application of filters... »
  In addition, it shows that the filters (based on guest user).
  
  I want to do is use a customized view of "No. Results" that displays the title of the report and has a message that I specify. I know I can do this by creating a view of 'No Results'.
  
  My problem is that the display filters is more if I use my opinion of personal results 'No '.
  
  Is it possible that I can show my 'No Results' opinion AND show that filters also discovered?

  Without customization, I don't think you can view filter when there is no data to display. So, here's a simple solution, you can do:

  1) go to the Advanced tab, and then copy the WHERE clause of your report.

  (2) go to the 'No' results show and in the text window, paste the content.

  (3) change the text as you wish. (Copy of the WHERE clause saves you from having to type everything in).

  Now your filters will be part of your view without results.

• Interactive report - filtering with the "IN" operator

  Hello
  
  I have a column in an international registration which is a concatenated field (Last Name, First Name MI). When filtering on this field using the IN operator, it returns the correct record if only one value is selected, but if more than one value is selected, no data is returned. It's like that it executes a statement GOLD instead of one and.
  
  Any suggestions on how to solve the problems or solve this problem?
  
  Thank you
  Matt

  Well, this isn't quite true. If the list had an entry in the form LAST_NAME | ',' | FIRST_NAME. » '||. MI, the query would return a match.
  Yes, you're probably better of filtering individually and last name fields.

  CITY