Wireless broadband gateway WBG-1200 Toshiba has

Similar Questions

• Vista SP2 has failed and corrupted Sprint Compass 597 for Sierra Wireless Broadband

  Hello, there when Vista SP2 came out, several months of my downloads I tried to install SP2. He COULDN'T as well as corrupting my Sprint to wide broadband Compass 597. I had to 'rollback' to a previous version of Vista Ultimate (32 bit) and had a technician Sprint "Reinstall" an older version of my wireless broadband to make it work again.  I am constantly on the download request to install SP2.  Microsoft has solved the problem for my without wire will not get corrupted again and I never knew why the Service Pack would not move.   My hardware is: Dell XPS M1530 Laptop, Vista ultimate 32-bit, 4 GB of ram. Any ideas/suggestions will be greatly appreciated.  Also if I should try to re - install and that there no what is the phone number of Support technique Microsoft.

  Thanks in advance.

  See KB948187 or open another free support incident:

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after you install a service pack<=choose this="" option="" this="" time).="" ~robear="" dyer="" (pa="" bear)="" ~="" ms="" mvp="" (ie,="" mail,="" security,="" windows="" &="" update="" services)="" since="" 2002="" ~="" disclaimer:="" ms="" mvps="" neither="" represent="" nor="" work="" for="">

• Satellite C660D-10W - 02 wireless broadband does not connect

  Hello.

  I bought a new computer toshiba laptop, its called a Satellite C660D series Satellite C660D - 10W.
  Then I installed the modem 02 top wireless broadband.
  He showed a shortcut for 02broadband on the left side of the desktop.
  So far everything was going perfectly.

  But... then when I double click on the shortcut of 02broadband, 02broadband logo comes as usual, he shows his support for about 30 seconds, but then it says that it cannot detect or unable to connect! I disconnected and then reconnected to broad band several times, but it just keeps saying the same thing.
  There are 3 other laptops in the House and the 02 broadband installed and immediately connected on each of them.

  One of the laptops was just bought 2 hours ago and it installed and connected to broadband right now.
  This laptop from toshibsa is the only one the 02broadband connects not with, but it installs perfectly down to it.
  Its very weird and makes me absolutely nuts.

  Is there anyone else that happened and could it please help?

  Thank you
  brand

  Hello

  There is no module 3G inside the Satellite C660D-10W.
  Did you find the 3G module in Device Manager?
  I guess that you will not find everything and that's why you cannot use the software installed

  This is the reason why it does not work

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.

• Windows Vista does not work with modem wireless broadband

  I saw no answer to this problem.  Can anyone help?

  Windows Vista on my DELL laptop at home does not work with my new NETGEAR modem wireless broadband 3 G.  The modem appears in the list of networks, I just errors like: unable to connect, cannot diagnose,... Both devices work perfectly well together when connected by cable but not wireless.  Interestingly, my laptop work, also a DELL but runing Windows XP, works very well with the NETGEAR modem.

  Summary:
  Vista / Netgear wired - work
  Vista / Netgear wireless - does not work
  XP / Netgear wireless - work

  I went through the NETGEAR troubleshooting guide, doing everything from changing the types of security to manually enter the MAC address of the laptop.  I ran to the ground with the NETGEAR support engineers, and they said check with Microsoft.  I am convinced that it has something to do with Vista.  Any ideas?

  Hi jhandcc,

  Please provide the complete error message you receive.

  Step 1: You can follow the steps described in the article below

  Error message when you try to automatically connect to a wireless access point that uses authentication of network shared in Windows Vista: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/948180

   

  If the problem persists,

  Step 2: Download and install the latest service pack for windows vista on the computer

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791/

   

  Reference:

  You cannot connect to a wireless network on a Windows Vista-based computer

  http://support.Microsoft.com/kb/935222

   

  For more information, see the link below

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Let us know if this helps

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• wireless broadband adapter repeatedly no longer works and disappears

  I have a pavillion tx1120us notebook with a wireless broadband adapter which had a new drive installed. Vista Home Premium 32 bit software was to be resumed from the HP drive. The Vista has been updated to SP2. The wireless adapter worked until the laptop is put to sleep or shutdown. Then the wireless driver and the HP wireless assistant seem to disappear. The driver is in the list of programs (uninstall) in the Control Panel, but registration is not in the Device Manager list. The adapter seems to work again intermittently when reinstall updated the OS if a does not work when the driver card and the HP wireless assistant are... Ethernet works fine and is so the rest of the BONE pieces and also the HP applications except those mentioned above.

  Hello

  It is a well known problem with this model.

  It is caused by the defective Nvidia chipset.

  The cheapest solution to this problem is to use external wifi adapter.

• Satellite P200D-128: Toshiba has a Web page for the graphics card drivers?

  Hi I want to update the driver for my card graphics ATI Mobility Radeon 2400HD with the updated driver, Toshiba has a Web page for the graphics card drivers?

  Concerning the best and warm
  Adrian Wainer

  Hello

  All Toshiba drivers for European notebook series can be found on the European driver Toshiba page:

  You can find it here:
  http://EU.computers.Toshiba-Europe.com-> support Download Center &-> Download drivers

  You will find all the latest drivers published by Toshiba

• Computer laptop Gateway with Windows Vista has locking password HARD drive on it.

  I bought a computer laptop gateway I believe it has windows vista but it has locking password on that HARD drive can I buy windows 8 or 8.1 and download on it. Also it allows me to run any cd what can do?

  * Original title: laptop computer purchase

  Hello

  I suggest that you either get the password from the seller or return the laptop to the seller and get a refund.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Guests of password to you at the beginning, before my Toshiba has loaded my system.

  Original title:

  When I turn on my laptop asks me my password at the beginning until my Toshiba has loaded my system. Once loaded, I wonder my administrator password, until I can make progress. How can I remove the first request of password, or delete partitions?

  Hello

  You have the first password, who is invited before the start of the computer to the top?

  The password you are talking maybe a password for the BIOS.

  You will need to access the BIOS and disable the password.

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I suggest you to contact the manufacturer of the computer for tying this topic.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• From high-speed wireless broadband with a cable modem, and shows the connection, but cannot access the web w / IE8

  I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.

  However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.

  Any ideas? Thank you!!

  JFerguson15,

  If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• INTERNET CONNECTION PROBLEM - laptop computer connects is the DNS through the modem to broadband gateway to resolve the address of Web site

  Regardless of the browser that I use on my VISTA laptop, navigation stops... which means the laptop connects is no longer the DNS through the modem to broadband gateway to resolve the address of the Web site.

  However internet is on and some applications that Act on the internet are connected and okay. for example: Skype

  Hello

  Try this process.

  WinSock and TCP/IP

  When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files  When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.

  If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh int reset

  And the sam to do this.

  ipconfig/flushdns

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Up.exe, KERNELBASE.dll APPCRASH Set, installing wireless broadband

  Problem event name: APPCRASH

  Application name: Set up.exe_unknown
  Application version: 0.0.0.0
  Application timestamp: 4b1ae3c6
  Fault module name: KERNELBASE.dll
  Fault module version: 6.1.7600.16385
  Fault module timestamp: 4a5bdaae
  Exception code: e06d7363
  Exception offset: 00009617
  OS version: 6.1.7600.2.0.0.768.2
  Locale ID: 1033
  Additional information 1 = 0a9e
  additional information 2 = 0a9e372d3b4ad19135b953a78882e789
  I tried to connect my wireless broadband to the other computer.
  and it is not working properly.
  and when I connect it again to my office, blue screen goes out
  then stop.
  a few tips or advise pls... tnx!

  Hi Mike mabana,.

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description provided, looks that you can not install wide wireless on your desktop.

  He would be grateful if you can answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

   

  Method 1:

  I suggest that disconnect you all external devices except the mouse and keyboard and then perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

   

   

  Method 2:

  
  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• It would make a difference with the network to change to Wireless Broadband?

  original title: Iam moving so I had Internet & cable t switch now I use Wireless Broadband would be - that make a difference with the network?

  Just need to know if from cable Internet broadband wireless to have an effect on my computer >

  as with the network, I know that I have to change my USB connection?

  Hi pattylopezSP,

  See these articles for more information on the wireless connection.

  5 steps: how to set up your network wireless home

  Wireless network card: frequently asked questions

  The network connection is based on the Internet (FSI) Service provider. Speed and other features depend on the tariff or package you are using. You can also contact the ISP for further assistance and information.

• Wireless mouse (PA3706E-1ET1) Toshiba has stopped working

  Hello

  My wireless mouse suddenly stopped working for no apparent reason. The computer recognizes that the mouse is attached, but nothing works. I tried the obvious things like replacing the batteries, removing the USB and reconnect it and download the drivers for the mouse, but his does not work. It does not move the cursor, the buttons do not work, nothing. Any suggestions on how to fix this would be appreciated.

  Hello

  > It's not moving the cursor, the buttons do not work, nothing. Any suggestions on how to fix this would be appreciated.

  Have you tested this mouse in connection with other computers or laptop?

  Recommend doing this if the mouse does not work on other systems, then I guess there is a hardware problem and maybe you will need to replace the mouse.