Problem with MessageRadioButton when using PPR on this event.

Similar Questions

• Having a problem with artifacts when using Dip to black transition

  I use Adobe first Pro CC on a Dell XPS 8900 with a NVIDIA® GeForce® GTX 745 4 GB of DDR3 memory. Both in the Editor (with all the rendering) and the final video (which I tried to export in several ways), I get artifacts when using the two Dip to black and chained transitions. I did check the sequence settings to match the original film, as I originally had two cameras (ARRI and XDCAM) images. I get the problem on two types of sequences. I tried to convert the original film in .mp4 using a HD video converter and then re-import it. The problem remains. Then I tried to download sequences of archives on the Adobe site and imported. And I still have the problem. I think that it has something to do with my computer as before to get the XPS 8900 I had used an older Dell model (without graphics acceleration or upgrade) and had not not this problem. You can see artifacts in the video below. Strangely, I don't see any artifacts when I used transitions on the titles of lower third or in transitions from outset between title sequences. It is only when transitions are used on real images (and, again, I tried to use other types of sequences and had the same problem). Any thoughts on how to solve this problem would be greatly appreciated.

  I am simply not see something weird.  The transition is quite fast, however.

  Give that DNxHD export/upload to try.  See if you like better.

• Problem with flight when using no call blocking

  Hello
  
  I have a scenario in which I need to call a service several times based on header lines. I used the following approach to reduce the execution time:
  
  1. use flight with "n" being the no. lines in the header.
  2 call the service inside the flow with nonBlockingInvoke set to true for the PL. The assignment of the var of entry for the service takes place inside of flight activity.
  
  The problem with this approach is that the assignment happens correctly. for example. LineId1 is assigned to the service entrance in the first stream, LineId2 the second rate and so more..., but in the used input variable values by invoke remains constant in the first mission that produced the first stream Viz LineId1 will be happened as an input for all activities of other flows, despite the copy in entitled operation happening properly.
  
  Can anyone share some thoughts on this?
  
  Kind regards
  Sandeep

  Hi Sandeep,

  I think the mistake you make is that the defined variable to call the service endpoint (i.e. the input of the invoke activity variable) should not be a global variable, but instead should be defined as a local variable in the scope that contains the activity of flight.

  Concerning
  AYUSH

• Problems with keywords when using 2 directories.

  Pardon my french, I'm Norwegian... ;-)

  I LR3.6 and have a folder structure I am satisfied, I also use keywords on the images.

  Je want a Directory with B /W and an color, in order to work in a directory where only B/W images. I think that itis easier to see the images that work B/w this way...

  J’ai copied the LRCAT file into a new file. When I opened LR I chose the directory to load, B/W or Color. It works OK. When importing new photos I copy images in the desired Directory (for example. Color?) with the failure of development parameters. When I Use the directory of b/w Synchronize the color directory with the black and white default develop settings.

  I imported the same list of key words in the two directories, but the problem , it's that the the key words are not included on all when I sync. The images have the same file name so it should be possible to retrieve / Sync Keywords so?

  Is he is at - it who can help mebe, either with another solution where didn't need 2 directories or how I can import of keywords to another Directory?

  Rather than having the same files stored in two catalogs, you should have to do this as "virtual copy" in the same catalog.

  Now, to sort. To make the backup copies of these two catalogs, then use the file > import from another catalog and check the option create new virtual copies. Then import - make sure you add is selected and not copy or move. We should end up with the two B & W and executions as well as virtual color copies.

• Problem with microphone when using the speakerphone in 5.1.1

  During the call to anyone... When I press the speaker button to hear a louder voice microphone be cut always... even if I uncheck the speaker button!
  To speak normally without speaker... so, I have to end the call and start a second time to get the mic working!
  What is c?
  Please someone try and post it here...
  We need an update I think to fix this bug with mute mic!
  Please answer me.
  Thank you.

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.

• I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

  I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

  Hi dude, on average

  A. from when what happens?

  B. recent changes made on your computer?

  C. you get any error message?

  First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

  Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• Problems with the server of Cirrus cause this

  Hello

  We are have developed an application that uses the Cirrus server for two months now and today, we have difficulty with the Netconnection.call method we use to call the OnRelay method on the other peer. When a peer calls the calling method on the netconnection OnRelay on the peer is called from time to time (so it's really not reliable).

  We are curious to know if this could be related to recent problems with the Cirrus Server? If this isn't the case, which could be a reason the calls work only part of the time?

  Kind regards

  Kevin

  While the problems with our hosting provider are not yet resolved, the cluster must operate in a nominal way. which should include the correct and relatively reliable relay/onRelay function operation.

  Note that relay/onRelay is rate limited to approximately 1 relay 2 seconds (approximation with a sliding window and about 10 relay every 20 seconds). This speed limit is in place, because the function of relay/onRelay is expensive to provide and a developer he abused. the limit is implemented by dropping applications for relay for a while if the rate exceeds the limit point. the ceiling is by sender NetConnection.

• Hi, I have a problem with FF, when I click on a google site, opening in a new tab and I don't want to, can you help me?

  Hi, I have a problem with FF, when I click on a google site, opening in a new tab and I don't want to, can you help me?

  Hello, this may be a preference in your google search parameters. go to google.com/preferences and disable the option to search results open in a new browser window.

• There is a problem with Adobe Acrobat/Reader. If this is the case, please exit and try again. (0:104)

  There is a problem with Adobe Acrobat/Reader. If this is the case, please exit and try again. (0:104)

  I get this message when I try to open a PDF from a Web page link. When I open the task on the Applications tab Manager, I don't see that adobe Acrobat/Reader listed at all.

  How can I solve this problem?

  I can answer my own question.

  After typing "patch" and read a few threads, I found out how to fix it.

  http://forums.Adobe.com/message/4541936#4541936

• Problem with the change in value of listbox event

  Hello

  I have a problem with the help of Listbox value change event. The code that I have attached is a simplified version of the largest program, but the problem is the same. One of the loops of Nonna is responsible for handlig occurring events ant the other is responsible for the execution of the program. In the project of oryginal I use a listbox control to determine which plots graphic display of a waveform is visible (first position of the listbox-> only plot first visible etc.). In the attached vi, I just show the current value of the listbox control. The problem is the event runs only once and then the program crashes. I want to be able to change the value of the listbox work both at idle and in State of a program, but when I put the structure of the event in both States, he does not. I'd be very grateful if someone smarter than me could tell me where I made my mistake. I want my program to be able to manage the keys and listbox events in States (slow down and knit) program.

  You have two structures of event in two cases different from the structure of the case, and both are tuned to listbox events has changed. Because only once can be triggered at any time, the VI crashes (lock events the front panel (default) until the event can complement).

  You must use a unique event structure managing all events.

  The overall program architecture looks like inside-out for me.

  For the buttosn, you must use action lock (switch not release!) and use the value changed events.

• Problem with iPad when I try to choose a photo from library using browseForImage

  Hi, this is my first post, and I hope you can help me with this problem... I'm using cameraUI.launch to open the camera app, and take a picture without problem, it works fine, but when I try to open the Gallery to the iPad using browseForImage this open a small window to select a rigth folder? but when I try to select any folder this cancel any operation and I can not download any image from my Gallery... Please help, Im works with FB 4.7, apache 4.14 and adobe Air 16.0.0.272 on iPhones and Android devices I have not this problem right on iPad.

  It's source code:

  protected function btnGallery_clickHandler(event:MouseEvent):void {}

  If (CameraRoll.supportsBrowseForImage)

  {

  If (Capabilities.manufacturer.IndexOf ("Android") > = 0)

  {

  loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, this.contentLoadedHandler);

  }

  cameraRoll = new CameraRoll();

  cameraRoll.addEventListener (MediaEvent.SELECT, imageSelected);

  cameraRoll.addEventListener (Event.CANCEL, browseCanceled); / * This function is activated whenever I try to select a folder to select a picture on the iPad * /.

  cameraRoll.addEventListener (ErrorEvent.ERROR, mediaError);

  cameraRoll.browseForImage ();

  }

  }

  Finally I find a solution, in fact adobe has solved the problem with the new beta 17 Air... you must download for flex developers and use this version on your project...

  Download Adobe AIR 17 Beta - Adobe Labs

• Re: Problems with Microphone when I use Skype

  Could anyone help with the problems I am experiencing with the microphone when using Skype?
  I also tried to use an external, but still problems with the other person can't hear me, y at - it a setting I can adjust its been to Toshiba and they said that there is no fault.

  Any help would be appreciated.

  In fact internal mic works well with Skype.
  All you need to do is enter the sound options of Skype and check the settings there especially if you use the headset.
  Play around with these settings.

• Firefox locked up with YouTube when using Dragon NaturallySpeaking

  I use Dragon NaturallySpeaking to get all my data into the computer as I am paralyzed from the shoulders down, incapable of any other way to the data. When I click on a link that would be for YouTube or other types of media devices, Firefox and Dragon NaturallySpeaking will lock leaving me place the Creek without a paddle. Short of abolishing the use of Firefox as my default browser, I am open to all suggestions that you may have because Microsoft Internet Explorer is a program that I can't stand using and I use Firefox since its inception and I like except when it crashes.

  Thank you very much and I am open to any suggestions you might have before uninstall DNS because it is a must.

  Bruce

  I noticed a similar problem, which began occurring only recently. If I'm dictating in Firefox use Dragon NaturallySpeaking 8, if it consists in the search bar or in a Gmail e-mail window, Firefox can lock up without warning. The only way I found to recover the problem is to close with force Firefox using Windows Task Manager.

  EDIT: this error message titled 'dd10edit' might be relevant - "COM returned an unexpected error code: details are HOOKERR_CONNOTINJECT.